This Solicitation opportunity from Department Of Defense was posted on July 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
TEE, TUBE TO BOSS
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
This contract specifies the procurement of a steel tee fitting with cadmium plating, designed for fluid connections under the SAE aerospace standards AS1005H and AS18280H, rated for 3000 PSI. The fitting features three ports: two at 0.375 inch nominal tube size and one at 0.500 inch nominal tube size, with Class 3 threads and a 24-degree cone flareless design. The part number AS1005-060608 must be manufactured or assembled by an accredited supplier listed on the Performance Review Institute’s Qualified Manufacturer List or Qualified Products List. It is classified as a critical application item and must comply with strict quality and configuration control requirements including engineering change proposals and variance requests. Ozone-depleting chemicals are prohibited, and substitute chemicals require prior approval. The contract mandates adherence to MIL-STD-2073-1E packaging standards, with packaging, marking, and palletization following MIL-STD-129 and DLA procurement requirements. Sampling must comply with MIL-STD-1916 or ASQ H1331, requiring zero nonconformances unless otherwise specified, and all attributes default to major unless designated. The item is delivered FOB origin with a 76-day delivery window, and the full quantity of 117 units must be delivered with no variance permitted. Inspection and acceptance occur at destination. The NSN 4730-00-486-5166 is tied to purchase request 7016473476, with a unit price of $117.00 and a total value of $13,689. The delivery must be directed to DLA Distribution Warner Robins at Robins AFB, Georgia, with transportation governed by DLA procedural notes. The original required delivery date is October 3, 2028, though the need ship date is July 20, 2026.
General Info
Place of Performance
BLDG 376, ROBINS A F B, GA, 31098-1887, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
TEE, TUBE. STEEL MATERIAL, CADMIUM PLATED.
PORT #1; .375 INCH NOMINAL TUBE SIZE, PORT #2; .375 INCH NOMINAL TUBE
SIZE, PORT #3; .500 INCH NOMINAL TUBE SIZE. PER SAE AEROSPACE STANDARDS
TITLED "FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI"
AND "FITTING, TEE, STANDARD AND REDUCER, FLARELESS".
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CLASS 3 THREADS APPLY TO THIS NSN.
THIS IS A PERFORMANCE REVIEW INSTITUTE (PRI) QML OR QPL ITEM. PRODUCT
SUPPLIED TO THIS SPECIFICATION SHALL BE MANUFACTURED BY AN ACCREDITED
MANUFACTURER (FOR COMPONENTS) AND/OR ASSEMBLED BY AN ACCREDITIED
MANUFACTURER OR ACCREDITED ASSEMBLING DISTRIBUTOR (FOR ASSEMBLIES) AS
LISTED IN THE PRI QUALIFIED MANUFACTURER LIST (QML)OR QUALIFIED PRODUCTS
LIST (QPL) FOR THIS STANDARD. THE QML OR QPL IS AVAILABLE AT
WWW.EAUDITNET.COM.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
CRITICAL APPLICATION ITEM
IAW BASIC NON GOVT STD SAE AS1005H
SPE7M3-26-T-5063
SECTION B
REVISION NR H DTD 06/01/2017
PART PIECE NUMBER: AS1005-060608
IAW REFERENCE NON GOVT STD SAE AS18280H
REVISION NR H DTD 05/01/2021
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016473476 0001 EA 117.000
NSN/MATERIAL:4730004865166
DELIVERY (IN DAYS):0076
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:49
WRAP MAT:GB CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:EC INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BAGS SHALL BE FABRICATED FROM TYPE 1, 2, OR 3, CLASS B, STYLE 1, OR TYPE 1 OR 2, CLASS C,STYLE 1, I/A/W MIL-B-117
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SPE7M3-26-T-5063
SECTION B
PR: 7016473476 PRLI: 0001 CONT’D
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:07/20/2026 Original Required Delivery Date:10/03/2028
SPE7M3-26-T-5063 NSN/Part Number: 4730-00-486-5166 Quantity: 117 EA Purchase Request: 7016473476QTY: 117 Delivery: 76 days ADO
More opportunities from Department Of Defense → FLUID HANDLING DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 750+ contractors already using CLEATUS