This Solicitation opportunity from Government of Canada was posted on October 7, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Telecommunication Shelter, Radio Frequency Antenna & Electrical Installation – Chicoutimi Nord, Quebec

Closed

2023483296/AInternational

Submission Closed10/07/2024, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 237130

New

AAL-1440-01 RCO Relocation Hooper Bay - BNATCS

Solicitation # AAL-1440-01

Solicitation AAL-1440-01, managed by PTSI Managed Services Inc. for the FAA, involves the relocation of the Remote Communications Outlet (RCO) in Hooper Bay, Alaska. The scope of work is categorized under NAICS code 237130 for Power and Communication Line and Related Structures Construction and specifically includes the installation of foundations, duct banks, and grounding work. The estimated magnitude of the construction project is valued between 100,000 and 250,000 dollars, with a proposed start date of December 10, 2026. This opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. The solicitation was posted on October 29, 2026, with a response deadline of November 14, 2026. Interested firms should coordinate with the primary point of contact, Masanori Akers, the Parsons Subcontract Administrator, for further information and submission details.

PTSI Managed Services Inc.

POSTED

DEADLINE

Installation of Buried Fiber Optic Cable Stanton North Substation to Hoskins Substation

Solicitation # 26085

The Nebraska Public Power District is soliciting bids for Request for Bid No. 26085 to install approximately six miles of underground fiber optic cable between the Stanton North and Hoskins Substations in northeast Nebraska. The scope of work encompasses all labor, materials, and supervision required for staking, material coordination, property owner contacts, and right-of-way restoration. Specifically, the contractor will install 48-strand buried fiber optic cable provided by the contractor and 48-strand all-dielectric fiber provided by the District. The project must adhere to RUS Form 515a and IEEE Standard 1333-1994 for guided boring. Work is expected to be awarded by November 25, 2026, with a final completion deadline of April 15, 2027. Bids are due by November 13, 2026, and must include a completed pricing spreadsheet and current all-inclusive equipment and labor rates. Evaluation factors for the award include quoted price, conformance with specifications, past schedule performance, and the bidder's financial responsibility and experience. To qualify, bidders must certify the completion of at least three similar buried fiber optic installation projects within the last five years. Payment terms specify that 95 percent of the price is paid within 30 days of acceptable performance, with 5 percent retained until final acceptance. An optional pre-bid teleconference is scheduled for November 5, 2026, to review contract specifications.

Nebraska Public Power District

POSTED

DEADLINE

High-Voltage Transmission Installation & InterconnectionThis subcontract for High-Voltage Transmission Installation and Interconnection involves the installation of 230kV transmission lines at the NSB Kings Bay US Navy facility. The scope of work includes the recapitalization of the transmission loop, the coordination of power service interruptions to ensure continuity of operations, and the integration of proprietary protection schemes with the Georgia Power Company to deliver a fully operational transmission loop. The project requires the use of specialized machinery and 230kV transmission equipment suitable for military zones. Due to the nature of the facility and the critical infrastructure involved, personnel must possess Secret security clearances and maintain strict NERC CIP compliance. The contract is managed under Navfacsyscom Southeast for the Department of Defense.

Navfacsyscom Southeast

POSTED

DEADLINE

B21 Utilities & Site Improvements, Communications & Electrical Infrastructure, Dyess AFB OT Feasibility & Business Feedback

Solicitation # W9126G27R1CSY

The U.S. Army Corps of Engineers, Fort Worth District, is conducting market research via a Sources Sought notice for the B-21 Utilities and Site Improvements project at Dyess Air Force Base, Texas. This initiative aims to establish high-reliability primary electrical power distribution and dedicated fiber-optic communications infrastructure to support the bed-down of the B-21 weapons system. The scope includes the installation of single-mode fiber optic cables, telephone system expansion, power cabling in concrete encased ducts, pole-mounted conductors, and associated transformers and switchgear. The project also encompasses site improvements such as earthwork, grading, and erosion control. The estimated Construction Cost Limitation is $28,550,000, though an $8 million electric substation and specific end-user network equipment are expressly excluded from this contract. The government is currently evaluating whether to utilize a traditional Federal Acquisition Regulation based contract or an Other Transaction Agreement under 10 U.S.C. section 2808a. If a collaborative procurement framework is chosen, a two-phase selection process will be implemented, focusing first on technical capability, past performance, and collaborative execution history, followed by an evaluation of final technical and price proposals. The project must adhere to strict Department of Defense standards, including UFC 1-200-01 for general building requirements, UFC 4-010-01 for antiterrorism, and UFC 4-010-06 for cybersecurity of facility-related control systems. The anticipated period of performance is 690 calendar days from the notice to proceed, with a required beneficial occupancy date of March 8, 2030.

POSTED

DEADLINE

De Palma Road Electrical Conduit Installation Project

Solicitation # TLARC-819

The County of Riverside is soliciting bids for the De Palma Road Electrical Conduit Installation Project (Project No. D4-0072) located in the Community of Horsethief Canyon, California. The project involves the excavation and backfill of approximately 1,000 feet of trenching, the installation of 685 feet of 1.5-inch and 350 feet of 3-inch electrical conduit and handholes, and the installation of 6-inch Type D concrete curb per County Standard No. 204. All work must adhere to Southern California Edison plans and be completed within 30 working days from the commencement date specified in the County's written order. The estimated project cost is 209,000 dollars. The contract will be awarded to the lowest responsive and responsible bidder. Bidders must submit their proposals by December 2, 2026, at 1:30 P.M. Pacific Time, including a non-collusion declaration and a bid guarantee of 10 percent of the total bid. The awarded contractor must provide performance and payment bonds, comply with California State Labor Code prevailing wage requirements, and adhere to specific affirmative action plans based on contract value and employee count. Payments will be made monthly, with the Owner paying 90 percent of the value of labor and materials incorporated into the work and 75 percent of materials stored on site, subject to certification by the Architect.

POSTED

DEADLINE

Installation Of Street Lighting On Raymond Avenue From Maple Street To North City Limits

Solicitation # 2026-IFB-CIV-0549

The City of Pasadena Department of Public Works is soliciting bids under solicitation number 2026-IFB-CIV-0549 for the installation of a new street lighting system on Raymond Avenue, extending from Maple Street to the North City Limits. The project requires the contractor to furnish and install concrete street lighting standards, foundations, LED luminaires and fixtures, conduits, conductors, pull boxes, and other appurtenant work. Key technical deliverables include 29W or 50W LED replacements, galvanized steel conduits, and 6 foot Type S Scroll Arms. The contractor must provide all necessary labor, materials, and equipment, ensuring compliance with the ADA, CBC, Title 24, and PROWAG accessibility guidelines. Bids must be submitted electronically via the City of Pasadena eProcurement Portal by 2:00 pm on November 17, 2026. Qualified bidders must provide evidence of experience with two similar governmental projects and submit several mandatory documents, including Form AA-1, Form AA-2 for labor exceeding 25,000 dollars, a non-collusion declaration, and a DHS contract disclosure. A bid security of five percent of the total bid price is required, and the successful awardee must provide material and faithful performance bonds for 100 percent of the base bid. Work must commence within 15 calendar days of the Notice to Proceed and be completed within 20 working days. Invoicing is handled through the city's Vendor Invoice Portal, with payments issued on Tuesdays and Thursdays.

City of Pasadena Department of Public Works

POSTED

DEADLINE

Fiber Optic Ground Wire (OPGW) InstallationThis subcontract involves the installation of .551 diameter fiber optic ground wire for prime contractors working on Nebraska Public Power District projects. The scope of work specifically covers the installation of OPGW from Structure 107 to Dead-End Structure 79, requiring the delivery of a fully installed and tested system. To ensure the integrity of the fiber and prevent damage, the contractor must utilize specialized pulling and tensioning equipment in strict accordance with the engineering specifications outlined in Section G. The project falls under NAICS code 237130, with a response deadline set for December 2, 2026.

Nebraska Public Power District

POSTED

DEADLINE

High-Voltage Conductor and Shield Wire InstallationThis subcontract for High-Voltage Conductor and Shield Wire Installation involves performing specialized electrical infrastructure work for prime contractors on Nebraska Public Power District projects. The scope of work focuses on upgrading existing 266 26/7 ACSR to 954 45/7 ASCR Rail conductor and replacing 3/8 inch EHS steel shield wire with 7/16 inch EHS steel. Additionally, the contractor is responsible for installing insulators, dampers, crossarms, and X-braces in strict accordance with the stringing charts provided in Section I. To successfully execute the project, the contractor must utilize tensioners and pullers to deliver a fully tensioned conductor and shield wire system. This opportunity falls under NAICS code 237130, with a response deadline set for December 2, 2026.

Nebraska Public Power District

POSTED

DEADLINE

Transmission Structure Erection and Pole SettingThis subcontract for the Nebraska Public Power District involves the erection and setting of transmission structures. The scope of work requires the installation of 28 wood H-Frame tangent structures and one steel monopole on a drilled pier. Key technical requirements include backfilling poles with crushed limestone and the installation of ground rods, wire, molding, and staples, with ground impedance testing performed according to specific technical drawings. The contractor is responsible for providing all necessary pole setting equipment and drilling rigs to deliver fully assembled and set structures. This project falls under NAICS code 237130, with a response deadline set for December 2, 2026.

Nebraska Public Power District

POSTED

DEADLINE

115kV Transmission Line 1266 Rebuild Stanton North Substation to Dead-End Structure 79

Solicitation # 26-012

Nebraska Public Power District is soliciting sealed bids for Contract No. 26-012 to rebuild approximately 4.05 miles of the 115kV transmission line 1266, extending from the Stanton North substation to Dead-End Structure 79. The scope of work requires the contractor to provide all labor, supervision, equipment, and miscellaneous materials to replace all structures, conductors, shield wires, and hardware. Key technical deliverables include the installation of 28 wood H-Frame tangent structures and one tubular steel monopole dead-end on a drilled pier, upgrading the conductor to 954 kcmil 45/7 ASCR Rail, and installing 0.551 diameter fiber optic ground wire and EHS steel shield wire. The project also involves tree clearing, site preparation, and the removal of existing structures and conductors. Bids are due by 2:00 p.m. CST on December 2, 2026, and must be submitted as sealed hard copies to the Procurement Department in Columbus, Nebraska. The award will be based on the lowest cost and best bid, with evaluation factors including technical conformance, schedule capability, financial standing, and past performance history. Prospective bidders are encouraged to attend an optional pre-bid teleconference and site visit on November 23, 2026. Required submission documents include a signed proposal page, a completed price quotation table, a W-9 form, and bid security in the form of a certified check, irrevocable letter of credit, or bid bond. The successful contractor must provide a performance bond and maintain workers compensation and commercial general liability insurance.

Nebraska Public Power District

POSTED

DEADLINE

MBE, WBE and SDVOB Contracting Opportunity

Solicitation # 2140303

L3Harris Technologies has been contracted by the New York State Thruway Authority to implement a new Land Mobile Radio system across 54 communications sites along the Thruway corridor, extending from Buffalo to New York City. This system is designed to support essential personnel performing roadway maintenance, road repair, and snow removal. The project involves significant site-level work, including pouring concrete for antenna towers, shelters, and generators, providing New York certified concrete testing services, installing antennas and coaxial cables with sweep testing, and performing electrical work such as installing power conduits, grounding components, transfer switches, electrical panels, and site fences. L3Harris is seeking qualified lower-tier subcontractors to support these efforts, with specific socioeconomic goals of 15 percent for Minority-Owned Businesses, 15 percent for Women-Owned Businesses, and 6 percent for Service-Disabled Veteran-Owned Businesses. Interested parties must submit their company and contact information, a brief description of capabilities, and a NYSTA Certified Vendor Number to Program Manager Daniel Voiland by December 10, 2026. An executed Non-Disclosure Agreement will be required before project plans are released for review.

POSTED

DEADLINE

Solar Traffic Signal Installation/RepairThis subcontract opportunity with Hennepin County in Minnesota involves the installation and maintenance of solar-powered primary or backup power systems for traffic signal repair projects. The selected contractor will work under prime contractors to install essential components, including photovoltaic panels, battery storage systems, and solar charge regulators, to ensure the delivery of fully functional power systems. Qualified applicants must hold a solar installation certification and provide documented experience managing large-scale solar projects. The solicitation was posted on October 27, 2026, with a response deadline of November 10, 2026. This project falls under NAICS code 237130 for highway, street, and bridge construction.

Hennepin County

POSTED

2 days ago

DEADLINE

in 12 days

AI Contract Overview

The Royal Canadian Mounted Police is seeking a contractor for the construction of a telecommunication shelter, radio frequency antenna, and electrical installation in Chicoutimi Nord, Quebec. This open tendering process is divided into two phases, beginning with a pre-qualification stage based on mandatory requirements. Bidders who successfully pass the first phase will be invited to submit financial bids during the second phase, which will also include a mandatory site visit. Pre-qualification remains valid for 60 days or until the contract is awarded. The final selection will be based on the lowest price. Interested parties must adhere to security requirements and the Integrity Regime administered by Public Services and Procurement Canada. All submissions and inquiries should be directed to the RCMP Procurement and Contracting Branch, with official updates and documentation managed through the Government Electronic Tendering Service.

General Info

RCMP seeks contractor for telecommunication shelter and antenna installation in Chicoutimi Nord, Quebec.

Agency

Government of Canada → RCMP

NAICS

237130 - Power and Communication Line and Related Structures Construction

Place of Performance

*Quebec (except NCR), CAN

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedOct 7

Solicitation

Response DeadlineOct 7

Deadline has passed

Submission Closed

10/07/2024, 02:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → RCMP

Contacts1 person available

OfficeN/A

Organization / AgencyGovernment of Canada → RCMP

Office AddressN/A

Contacts

Marie-Carmen SedjiPoint of Contact

contact@example.gov

+1 (555) 000-0000

Full Description

GSIN: 5159B: Other Special Trade Construction Work 5151A: Foundation Work 5169D: Construction, Installation Work Notice Type: Invitation to Tender (ITT) Tendering Procedure: Open The Royal Canadian Mounted Police (RCMP) intends to retain a Contractor to provide construction services for Telecommunication Shelter, Radio Frequency Antenna & Electrical Installation – Chicoutimi Nord, Quebec This is a first phase (Phase one) of a two-phase competition: the first phase will pre-qualify bidders based on mandatory requirements as per the attached ITT; second phase (Phase two) will invite the qualified bidders to provide a financial bid on the project based on the specifications and drawings. The list of pre-qualified bidders resulting from Phase One will be valid for a period of 60 days upon notification of meeting the mandatory requirements or upon award of contract in Phase Two whichever comes first. • There is a security requirement associated with this ITT. • There is a mandatory site visit included in phase two. • Canada retains the right to negotiate with any supplier on any procurement. • Documents may be submitted in either official language of Canada. • Refer to the attached tender documents to obtain further information. Basis of selection: Lowest Price Tenders must be submitted to the following email address: contact@example.gov Refer to the attached tender documents to obtain further information. Procuring Office: RCMP – Procurement and Contracting Branch Address: Royal Canadian Mounted Police – Procurement & Contracting Branch 73 Leikin dr. Ottawa, ON K1A 0R2 Email address: contact@example.gov DESCRIPTION: The RCMP has adopted the Integrity Regime administered by Public Services and Procurement Canada. As a result, the integrity provisions are being applied in RCMP contracting activities as outlined in this solicitation. Canada will make available Notices of Proposed Procurement (NPP), bid solicitations and related documents for download through the Government Electronic Tendering Service (GETS) at https://canadabuys.canada.ca/en/tender-opportunities . Canada is not responsible and will not assume any liabilities whatsoever for the information found on websites of third parties. In the event an NPP, bid solicitation or related documentation would be amended, Canada will not be sending notifications. Canada will post all amendments, including significant enquiries received and their replies, using GETS. It is the sole responsibility of the Bidder to regularly consult GETS for the most up-to-date information. Canada will not be liable for any oversight on the Bidder's part nor for notification services offered by a third party. Indigenous Procurement: The federal Indigenous Business Directory (IBD) is an online resource for all levels of government and the private sector to identify Indigenous business capacity. Having a business profile in the IBD will increase your company’s visibility and may provide additional business. A profile in the IBD can also allow you to compete for federal government contracts that are set-aside for Indigenous businesses through the Procurement Strategy for Indigenous Businesses. For more information and to review eligibility criteria and register, visit: www.canada.ca/indigenousbusinessdirectory.