Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

TERMINAL, STUD

Active
SPE4A7-26-T-600CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of two Terminal, Stud units under solicitation SPE4A7-26-T-600C, with a required delivery within 20 days of contract award and an original required delivery date of April 23, 2026. The item is identified as a commercial off-the-shelf (COTS) product with NSN 5940-01-702-8684 and part number ST71038, supplied by Regal Beloit America, Inc. The units must be delivered FOB origin, with no variance allowed in quantity, and inspected and accepted at the destination point. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling requirements, with five units per pack as specified, and all DLA Master List of Technical and Quality Requirements take precedence. Palletization must meet DLA Packaging Requirements for Procurement, and the shipment must be sent by the fastest traceable means, explicitly prohibiting parcel post. The delivery destination is N42420, LCSRON 1 DET MPSF NBVC, Building 1392, Port Hueneme, CA 93043, with assigned freight and tracking identifiers. Price is $2.00 per unit for a total of $4.00. All technical and quality specifications referenced through R or I numbers are governed by the DLA Master List in effect on the solicitation issue date, and the contract includes specific government-use-only fields for internal tracking and disposition.

General Info

Two COTS Terminal Stud units at $2 each, delivery by April 23, 2026, FOB origin, compliant packaging, shipped traceable to Port Hueneme, CA.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

335931 - Current-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

1150 STETHEM ROAD, PORT HUENEME, CA, 93043, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
ISAIAH STILL
contact@example.gov

Full Description

Show more
TERMINAL,STUD
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
TERMINAL,STUD
REGAL BELOIT AMERICA, INC 26405 P/N ST71038
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016529567 0001 EA 2.000
NSN/MATERIAL:5940017028684
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:005
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.
SPE4A7-26-T-600C
SECTION B
PR: 7016529567 PRLI: 0001 CONT’D
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N42420
LCSRON 1 DET MPSF NBVC
BLDG 1392
1150 STETHEM ROAD
PORT HUENEME CA 93043
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N42420
LCSRON 1 DET MPSF NBVC
BLDG 1392
1150 STETHEM ROAD
PORT HUENEME CA 93043
US
M/F: (TCN) N4242061101526
RDD: 120
PROJ: EP5 TP 2
SUPP ADD: YSASEB SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: 2L FC: LN
Need Ship Date:00/00/0000 Original Required Delivery Date:04/23/2026
SPE4A7-26-T-600C NSN/Part Number: 5940-01-702-8684 Quantity: 2 EA Purchase Request: 7016529567QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335931
New
DIBBS
Special-Purpose Electrical Cable Assembly ManufacturingThe contract calls for the manufacture and delivery of 300 units of a special-purpose electrical cable assembly identified by NSN 6150-01-347-8428, with strict adherence to International Traffic in Arms Regulations and Export Administration Regulations, requiring full compliance with ITAR and EAR requirements. Every unit must include comprehensive traceability throughout the production process and meet all mandated packaging standards to ensure secure handling and transport. The solicitation is structured as a subcontract with a total small business set-aside under the SBA program, reserved exclusively for small businesses as defined by FAR 19.5. It falls under NAICS code 335931 for Other Electrical Equipment and Component Manufacturing and is issued by the ASC Commodities Division under the Department of Defense. Responses are due by August 11, 2026, with the opportunity posted on July 29, 2026, and all work must be performed in accordance with defense-grade protocols for quality, security, and documentation.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335931
New
DIBBS
Power Cable Assembly ManufacturingThe contract calls for the manufacture of branched electrical power cable assemblies designated as RP001, strictly in accordance with specified contractual drawings. This includes end-to-end execution of component sourcing, precise assembly, rigorous testing to ensure performance and reliability, proper labeling, and secure packaging required for government delivery. All work must comply with technical and quality standards as outlined in the provided documentation, with full accountability for sourcing approved materials and maintaining traceability throughout the production process. The deliverables are intended for final use by a U.S. Department of Defense entity under the ASC Commodities Division. This is a subcontract opportunity under NAICS code 335931, with a response deadline of August 11, 2026, and a posting date of July 29, 2026. There is no set-aside designation or specific geographic performance location specified, but the final products must meet federal procurement requirements for military applications. All production, testing, and delivery activities are expected to be completed in alignment with defense logistics standards, ensuring readiness for direct government use. Potential respondents must be prepared to demonstrate capability in high-reliability electrical assembly and compliance with defense contract obligations.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335931
New
DIBBS
Special Purpose Electrical Cable Assembly ManufacturingThe contract entails the full lifecycle manufacturing of a specialized electrical cable assembly as specified by the government, covering all phases from initial design validation through component procurement, assembly, rigorous testing, proper labeling, secure packaging, and final delivery to stock locations within the contiguous United States. The work must adhere strictly to government technical and quality standards, ensuring the cable assemblies meet mission-critical performance requirements for defense applications. This is a total small business set-aside under SBA guidelines, restricted exclusively to small businesses as defined by the North American Industry Classification System code 335931, which pertains to other electrical equipment and component manufacturing. The solicitation was posted on July 29, 2026, with responses due by August 11, 2026, and is managed under the ASC Commodities Division of the Department of Defense. The contract is structured as a subcontract and requires compliance with all applicable defense procurement regulations, with delivery points limited to CONUS-based federal storage facilities.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICA
Solicitation # SPE4A6-26-R-XB96
The contract is for the procurement of 240 units of a special purpose electrical cable assembly, identified by NSN 6150-01-385-7941, under a small business total set-aside with NAICS code 335931. Delivery is required within 150 days after receipt of order, and the contract is structured as an indefinite-delivery, indefinite-quantity (IDIQ) vehicle with a lifetime ceiling of $350,000 across all orders. Inspection and acceptance occur at origin, with the contractor responsible for maintaining an acceptable government-approved inspection system and ensuring compliance with quality standards including ISO 9001:2015 and the DLA Master List of Technical and Quality Requirements. The cable assembly contains components governed by Qualified Products Lists or Qualified Manufacturers Lists, and compliance with these qualification requirements is mandatory. All items must be marked in accordance with MIL-STD-129 and RQ017 for physical identification, and packaging must adhere to DLA packaging requirements. The contract imposes strict cybersecurity requirements, including compliance with DFARS 252.204-7012 for safeguarding covered defense information, NIST SP 800-171 assessment mandates, and CMMC Level 2 certification for third-party assessments. Technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to authorized entities only, particularly those with approved US/Canada Joint Certification Program status and completed training on handling defense-controlled technical data. The contract includes standard clauses for termination, default, changes, and subcontracting, along with mandatory representations related to small business status, whistleblower rights, executive compensation reporting, and prohibition on restrictive confidentiality agreements. Invoicing must be conducted exclusively through the Wide Area WorkFlow system using appropriate document types based on contract type, and payment is routed via DoDAAC. The government will award based on a trade-off analysis where past performance—particularly historical quality, delivery compliance, and SPRS assessments—is significantly more important than price, which is approximately equal in weight to all other non-price factors combined.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335931
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M5-26-Q-0786
The contract specifies the procurement of 1,481 electrical plug connectors with NSN 5935-01-492-5319 under solicitation SPE7M5-26-Q-0786, with a firm fixed price and zero tolerance for quantity variance. Delivery is required within 87 days after award, with inspection and acceptance occurring at the destination. The item is designated as a critical application component and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, which supersede all other standards including ASTM D3951. Packaging must adhere to DLA’s RP001 requirements and MIL-STD-129 labeling, with hazardous materials conforming to FED-STD-313 and TQ requirement IP025, while non-hazardous items must be commercially packaged. All packaging must be marked and labeled per specified guidelines, and palletization must meet DLA standards. The item must be shipped to the DLA Distribution facility at New Cumberland, Pennsylvania, with transportation governed by DLAD PROC NOTES C19 and C20. The contract imposes strict physical identification requirements, mandates removal of government identification from non-accepted supplies, and requires compliance with the DLA unit of issue standard, with the sole point of contact being Barbara Hoffmann of the Department of Defense’s Active Devices Division.
ACTIVE DEVICES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICA
Solicitation # SPE4A6-26-R-XB97
This contract solicits the procurement of 300 units of a special-purpose electrical cable assembly with NSN 6150-01-347-8428, subject to strict export control regulations under either ITAR or EAR. Technical data associated with this item is classified as covered defense information and may not be disclosed to foreign persons, including foreign nationals within the United States or overseas, without prior authorization from the Department of State or Department of Commerce. Contractors must comply with DFARS 252.225-7048 and meet DLA-specific requirements to access this data, including holding an approved US/Canada Joint Certification Program certification, completing mandatory training on handling DOD export-controlled technical data, and successfully submitting the DLA Export-Controlled Technical Data Questionnaire. Distribution is restricted exclusively to DLA contractors who have been formally approved by the DLA controlling authority. Delivery is due 178 days after contract award, and the solicitation is set aside exclusively for small businesses under the SBA program, with responses due by August 11, 2026. The contracting activity is the ASC Commodities Division under the Department of Defense, and all correspondence should be directed to Joshua Tuggle.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-10EZ
This contract is for a special-purpose electrical cable assembly identified by NSN 5995-01-728-0161 and part number CS-DSSMDB9MF0-025, supplied by Amphenol Corp and Mouser Electronics as commercial off-the-shelf items. It is designated as a critical application item with strict compliance to DLA technical and quality requirements referenced in the DLA Master List, and packaging must adhere to MIL-STD-2073-1E and DLA packaging standards. The item must be marked in accordance with MIL-STD-129 with no special marking required, and palletization must follow RP001 guidelines. Two delivery lines are specified: one for seven units at $7.00 each to be delivered to a San Diego address with a required delivery date of July 23, 2026, and another for nine units at $9.00 each to be delivered to Virginia Beach with a required delivery date of May 6, 2026. Both shipments require delivery within 20 days, FOB origin, with zero variance allowed in quantity, inspection and acceptance occurring at destination. Shipment must occur via traceable freight methods, prohibiting parcel post. The contract falls under solicitation SPE4A6-26-T-10EZ, issued by the Department of Defense’s ASC Commodities Division, with a response deadline of August 6, 2026, and is classified under NAICS code 335931. Government use codes and tracking identifiers are embedded for logistics and accountability purposes.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
Federal
Power Cord and Ancillary Component SupplyThe contract is a Small Business Set Aside for the supply of a 10-foot power cord designed specifically for compatibility with the SiteRite 9 Ultrasound System, classified under NAICS code 335931 for Appliance, Component, and Accessory Manufacturing. It was posted on July 29, 2026, with a response deadline of August 3, 2026, at 5:00 a.m., and is structured as a subcontract under the Department of Veterans Affairs through the 247-NETWORK Contract Office 7. Performance of the contract is required to occur at a location with a zip code of 35233, though the exact city and state are not specified. The solicitation is open only to small business concerns as defined by the Small Business Administration, ensuring preference for eligible small businesses in the award process. The contract is accessible via a public SAM.gov portal link for further details and submission.
247-NETWORK Contract Office 7 (36C247)

POSTED

about 17 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335931
New
Federal
ACTUATOR,ELECTRO-ME
Solicitation # SPRMM126QKF98
This contract pertains to the procurement of two critical components for the MK 41 Vertical Launching System: the POWER SUPPLY ASSEMB and the ACTUATOR, ELECTRO-ME, under a Special Emergency Procurement Activity using Emergency Acquisition Flexibilities authority. The solicitation requires strict adherence to military standards including MIL-STD-130 for marking, MIL-STD-2000 for soldering, MIL-STD-129 for packaging and identification, and MIL-STD-973 for configuration control, with all work subject to inspection and acceptance at the source only—destination inspection is prohibited. The contractor must acquire or develop the Stable Base Master Phototools independently, as the government will not provide them, and must ensure traceability, military standard packaging, and compliance with ANSI/ESD S20.20 for electrostatic discharge control. No substitutions or design changes are permitted without prior written authorization, and deviations or waivers must be formally justified with evidence that quality, fit, form, or function will not be compromised. All offers must be submitted by the specified deadline via hardcopy or email to MARCHAUNDA.TILLER@DLA.MIL, with FMS quotes accepted in hardcopy form, and must include proof of being an authorized distributor if applicable. Surplus materials are not preferred; if submitted, they must be new surplus accompanied by a certification and comply with DLAD 11.302 and 11.390, and refurbished materials are explicitly prohibited. Delivery must be completed within 90 days ADC, with FOB origin terms applying, and all documentation including certificates of conformance, compliance with Buy American provisions, Small Business Program representations, and cybersecurity maturity certification must be included. Records of inspection and quality control must be retained for 365 days post-delivery, and the contracting office reserves the right to conduct any inspection necessary to verify conformity. The NAICS code is 335931, and the solicitation is managed by the Department of Defense through the DLA Mechanicsburg office with a designated point of contact for submissions and follow-up.
SPRMM1 DLA Mechanicsburg

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335931
New
Federal
59--ASSY, HULL PENETRAT
Solicitation # N0010425RFD67A
The contract solicitation titled 59--ASSY, HULL PENETRAT is issued under solicitation number N0010425RFD67A by the Naval Supply Systems Command Weapon Systems Support Mechanic, a division of the Department of Defense, with the office located in Mechanicsburg, Pennsylvania. The opportunity is classified as a presolicitation, indicating that formal bidding has not yet commenced, and it falls under NAICS code 335931, which pertains to other electrical equipment and component manufacturing. The solicitation was posted on July 29, 2026, with a response deadline of August 13, 2026, at 6:00 a.m. Eastern Time. The primary point of contact for inquiries is Benjamin Spangler, reachable via email at benjamin.t.spangler.civ@us.navy.mil or by phone at 7712290573. Performance of the contract requirements is expected to occur at the same location as the contracting office in Mechanicsburg, Pennsylvania. No specific type of set aside has been designated for this opportunity, meaning it is open to all eligible offerors without restriction based on business size or status. Interested parties can access further details through the provided SAM.gov link.
Navsup Weapon Systems Support Mech

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335931
New
SLED
Electrical Component Compliance and CertificationAll furniture with electrical components must comply with OSHA safety standards and be certified with valid UL, FMRC, or NEMA listings to ensure electrical safety and regulatory conformity. The contractor is responsible for conducting thorough testing of these components and providing complete documentation to verify compliance, including test results and certification records. This subcontract is issued under NAICS code 335931 by the Texas office of the General Land Office, with a response deadline of August 27, 2026, and is intended for performance in an unspecified location within the state. Failure to meet these requirements will result in non-compliance and potential contract termination.
General Land Office

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 335931
New
DIBBS
Electrical Connector Manufacturing and SupplyThe contract calls for the manufacture and supply of 471 electrical connectors identified by the National Stock Number 5935012205510, with strict adherence to MIL-DTL-55330 technical specifications and MIL-STD-2073-1E packaging standards. These connectors are intended for military use and must meet rigorous quality and performance criteria to ensure reliability in demanding operational environments. The production and delivery are governed by a subcontract arrangement under the NAICS code 335931, which pertains to other electrical equipment and component manufacturing. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The contract is administered by the Active Devices Division within the Department of Defense, reflecting its critical role in supporting defense logistics and equipment readiness. All deliverables must be packaged and labeled in full compliance with federal military standards to ensure proper handling, storage, and distribution throughout the supply chain.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 332312
New
DIBBS
PANEL, STRUCTURAL, AI
Solicitation # SPE4A7-26-Q-0920
The contract is for one structural panel, item number 1560-01-196-4405, under solicitation SPE4A7-26-Q-0920, with a delivery deadline of 440 days after order. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions applicable based on the acquisition type and timeline—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions use the revision active on the RFP issue date unless a later amendment supersedes it. The item is subject to multiple DLA-specific requirements including packaging, inspection and acceptance at origin, physical identification and marking of the bare item, measurement and test equipment standards, and configuration change management through engineering change proposals. Importantly, the item is exempt from item unique identification per service customer request, and government identification must be removed from non-accepted supplies. The technical data associated with this item is subject to export controls under ITAR or EAR, requiring explicit authorization for any disclosure to foreign persons, regardless of location, and only contractors with approved JCP certification, completed training, and DLA clearance may access such data. All applicable DFARS clauses, including those governing export control and contractor responsibilities, are in effect. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with NyA Currie as the primary point of contact.
Fabricated Structural Metal Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
New
DIBBS
ATTITUDE INDICATOR
Solicitation # SPE4A7-26-R-X975

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A7-26-T-599Q
This contract is for the procurement of 14 units of a PLUG, MACHINE THREAD with NSN/Part Number 5365-01-490-0332, under solicitation SPE4A7-26-T-599Q, with a response deadline of August 6, 2026, and delivery expected 171 days after award. The item is subject to strict export control regulations under either ITAR or EAR, meaning any transfer, including disclosure to foreign persons within or outside the United States, requires prior authorization from the Department of State or Department of Commerce. Technical data associated with this item is governed by DFARS 252.225-7048, and only DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, are permitted access. The placing organization is the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with performance location in New Cumberland, Pennsylvania, and primary point of contact Brandon Smith at brandon.1.smith@dla.mil.
Hardware Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
DIBBS
ARM, ACTUATING VANE
Solicitation # SPE4A7-26-T-599K
The contract pertains to the procurement of 5,059 units of an ARM, ACTUATING VANE with NSN 2840-00-199-5235, issued under solicitation SPE4A7-26-T-599K by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The item is classified as technical data subject to U.S. export control regulations, either ITAR or EAR, meaning any transfer, including electronic disclosure to foreign persons within or outside the United States, requires explicit government authorization. DFARS 252.225-7048 governs the handling of this controlled information, and access is restricted to contractors certified under the U.S./Canada Joint Certification Program who have completed mandatory DLA training and approval processes. Delivery is scheduled 547 days after award, with the place of performance located at Cherry Point, North Carolina, 28533-5040. The solicitation was posted on July 29, 2026, with responses due by August 6, 2026, under a NAICS code 336412 indicating aircraft and missile propulsion systems manufacturing. The primary point of contact for inquiries is Mahlon Marcus, reachable via email and phone. The acquisition is designated as a federal procurement with no set-aside classification. All parties handling the technical data must comply with stringent controls to prevent unauthorized disclosure, extending to U.S. companies and their foreign subsidiaries, and DLA mandates additional verification steps before granting access to the controlled technical information.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332322
New
DIBBS
DUCT ASSEMBLY, AIR COND
Solicitation # SPE4A7-26-Q-0921
The contract is for the procurement of four duct assemblies for aircraft air conditioning and heating systems, identified by NSN 1660-01-138-4412, with a delivery requirement within 300 days after award. The solicitation number is SPE4A7-26-Q-0921, issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with a response deadline of August 10, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR, restricting unauthorized disclosure of technical data to foreign persons, including foreign nationals within the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors holding valid US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and been approved by DLA. Packaging, inspection at origin, removal of government identification from non-accepted items, and calibration of test equipment are governed by specific DLA requirements, and all delivered items must adhere to rigorous quality standards applicable to both manufacturers and non-manufacturers.
Sheet Metal Work Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333924
New
DIBBS
RETAINER, HEATING UN
Solicitation # SPE4A7-26-T-600G
The contract is for the procurement of two retainers, heating units, identified by NSN 1450013612849, under solicitation SPE4A7-26-T-600G, issued by the Department of Defense through the Defense Logistics Agency. The unit of issue is each, with a total quantity of two units required at a specified unit price, and the total price reflects this quantity. Delivery is required within 20 days of contract award, with FOB origin terms meaning the supplier is responsible for delivery to the origin point only. Inspection and acceptance both occur at origin, and the items must be packed according to MIL-STD-2073-1E with specific packaging methods including preservative treatment type 31, no clamping or drying, and no cushioning material. Packaging must comply with DLA’s RP001 palletization standards and marking requirements as per MIL-STD-129, with no special marking codes applied. The delivery destination is the Naval Supply Center in Jinhae-gu, Changwon-si, South Korea, under the NLC ROK Navy designation. Freight forwarding instructions reference DLA procedural notes C19 and C20, with multiple forwarders permitted. The required delivery date is August 8, 2025, and the contract was posted on July 29, 2026, with a response deadline of August 6, 2026. The primary point of contact is Lexus Henry of the ASC Supplier Oper AE and AF Division, reachable via phone and email. The item falls under NAICS code 333924 and is categorized as a federal solicitation with no set-aside designation.
Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
LEAD, ELECTRICAL
Solicitation # SPE4A7-26-Q-0922
The contract is for the procurement of 22 electrical lead terminal strips, identified by NSN 5995-01-722-1565, under solicitation SPE4A7-26-Q-0922 with a response deadline of August 7, 2026, and a delivery requirement of 125 days after award. The item is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including packaging standards, removal of government identification from non-accepted supplies, and tailored higher-level quality controls for both manufacturers and non-manufacturers. The contract mandates compliance with inspection and acceptance at origin, physical marking of bare items, and strict export control protocols under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons or entities regardless of location. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal authorization from the DLA controlling authority may access the controlled technical information. Additionally, the contractor must be certified by a Cybersecurity Maturity Model Certification Level 2 C3PAO, ensuring adherence to cybersecurity standards. The solicitation is issued by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with Renee Bynum as the primary point of contact.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 12 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
TOW COLLAR, LANDING GEA
Solicitation # SPE4A7-26-T-600P
The contract is for the procurement of two TOW COLLAR, LANDING GEAR units with NSN 1620-01-073-1108 under solicitation SPE4A7-26-T-600P, issued by the Department of Defense through the Defense Logistics Agency. The requirement is designated as a Total Small Business Set-Aside under NAICS code 336413, with responses due by August 6, 2026, and delivery expected within 163 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must comply with DLA packaging standards, inspection and acceptance at origin, and the removal of government identification from non-accepted supplies. Physical identification and bare item marking are mandatory, and the item is subject to Covered Defense Information requirements. The technical data associated with this part is controlled under ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons, even within the United States, and only contractors with approved JCP certification, completed DOD export training, and DLA authorization may access the data. Cybersecurity compliance requires CMMC Level 2 certification by a C3PAO, and performance is to occur at Tinker AFB, Oklahoma. Primary point of contact is Mahlon Marcus at DLA.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 315990
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-600B
This contract is for the procurement of 1,087 units of a spacer sleeve identified by NSN 5365-01-285-9796 and part number NAS42DD6-48N, classified as a commercial item under the DLA acquisition system. The item must comply with a comprehensive set of technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including specific provisions for inspection at origin, government identification removal, physical marking, and test equipment calibration. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA’s packaging standards, and all labeling must reflect the specified unit of issue and quantity per unit pack. The item is designated as a critical application component and must meet the technical specifications of NAS42 Revision 11 dated 10/31/2012. Delivery is required FOB origin within 86 days, with strict zero tolerance for quantity variance and acceptance also taking place at origin. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and verification levels are assigned based on attribute classification. The contract specifies a unit price and total value but does not include a shelf life requirement. All shipments must be directed to the DLA Distribution Depot at Hill AFB, Utah, with transportation protocols outlined in DLAD Proc Notes C19 and C20. The required delivery date is April 16, 2027, with an initial ship date of November 1, 2026, under solicitation SPE4A7-26-T-600B, issued by the Department of Defense’s ASC Supplier Operations division.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AI
Solicitation # SPE4A7-26-T-600A
The contract is for the procurement of 16 structural plates designated for aircraft use, identified by part number 68A350868-2010 and NSN 1560-01-291-2535. The item is subject to strict export controls under either ITAR or EAR, prohibiting any disclosure or transfer of associated technical data to foreign persons, including foreign nationals within the United States, without prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed required training on handling DOD export-controlled technical data, and have received explicit approval from DLA. Packaging must adhere to DLA procurement standards, and physical identification of the item must follow specified marking requirements. Cybersecurity compliance is enforced through CMMC Level 2 certification for any assessed third-party organizations involved. The solicitation number is SPE4A7-26-T-600A, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 6, 2026, and an expected delivery timeline of 166 days after award. Performance will occur at Robins Air Force Base, Georgia, with Mahlon Marcus listed as the primary point of contact. The NAICS code 336413 applies, indicating the item falls under aircraft manufacturing. No set-aside classification is specified, and the contract is open to federal contractors meeting all export, cybersecurity, and packaging requirements. The technical data associated with the item is tightly controlled, and failure to comply with export regulations or handling protocols will result in contract violation.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A7-26-T-599M
This contract pertains to the procurement of 445 blind rivets identified by NSN 5320-01-192-1492 and part number NAS9308M-4-04, manufactured in accordance with Technical Data Package Revision B General 2, compliant with NAS9308 Revision 5 and reference drawing 13873 011921492-19241. The items must meet all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements. Inspection and acceptance occur at origin, following zero-defect sampling protocols under MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. All items must be physically marked and labeled as required, with government identification removed from non-accepted supplies. Packaging shall be palletized per RP001, and the unit of issue is each, with no variance permitted in quantity. The delivery schedule requires fulfillment within 84 days of award, with delivery scheduled for October 30, 2026, and an original required delivery date of January 1, 2027. The destination is the DLA Distribution San Joaquin warehouse in Tracy, California, with freight and transportation governed by DLA procedural notes C19 and C20. The contract is issued under solicitation SPE4A7-26-T-599M with a total price of $445.00 per unit for the full quantity, and the point of contact is Brad Ingram of the Department of Defense.
Hardware Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
SPACER, REACTION, IGNITI
Solicitation # SPE4A7-26-T-600N
The contract pertains to the procurement of four units of SPACER, REACTION, IGNITION with NSN 5365-01-230-3095, under solicitation SPE4A7-26-T-600N, with a response deadline of August 6, 2026, and a required delivery within five days after order placement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR, restricting disclosure of associated technical data to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Access to such controlled data is limited to contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DOD export control training and DLA questionnaire, and have received formal authorization from DLA. Packaging must adhere to DLA standards, inspection and acceptance occur at the manufacturer’s origin, and non-accepted items must have government identification removed. Covered defense information applies, and tailored higher-level quality requirements are enforced for both manufacturers and non-manufacturers. The solicitation is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with Christian Roberson as the primary point of contact.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details