Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TESTER, PULP, DENTAL

Active
SPE2DH-26-T-6485Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense Medical Supply Chain under solicitation number SPE2DH-26-T-6485, is for the procurement of one DigiTest 3 Dental Pulp Vitality Tester. The required kit must include the tester unit, a 9-volt battery, a ground wire and clip, and four autoclavable probe tips consisting of one standard long, one standard short, one labial, and one lingual tip. The item is identified by NSN 6520-01-706-0601 and is categorized under NAICS code 339114. The contract requires delivery within five days after the order is placed, with the place of performance located in San Antonio, Texas. Bidders must specify the source and part number being supplied and adhere to DLA packaging requirements, covered defense information protocols, and the removal of government identification from non-accepted supplies. Technical and quality requirements are governed by the DLA Master List, and the procurement is managed as an automated simplified acquisition through the DIBBS system.

General Info

DoD procurement of one DigiTest 3 Dental Pulp Vitality Tester for San Antonio, Texas.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

339114 - Dental Equipment and Supplies ManufacturingView NAICS

Place of Performance

601 DAVY CROCKETT RD, SAN ANTONIO, TX, 78226, USA

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-6485 RFQ

PDF•18 pages•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUSA
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TESTER,PULP,DENTAL
TESTER, PULP, DENTAL
TESTER PULP DENTAL 9V DIGITEST 3 PULP VITALITY TESTER, INCLUDES THE
FOLLOWING; (1) DIGITEST 3 PULP VITALITY TESTER (4) AUTOCLAVABLE PROBE
TIPS; (1) STANDARD LONG (D625), (1) STANDARD SHORT (D625), (1) LABIAL
(D636) AND (1) LINGUAL (D636) (1)
GROUND WIRE (D631GC) & (1) CLIP (D631GC) (1) 9-VOLT BATTERY.
UNIT OF ISSUE: EACH
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6520-01-706-0601 Quantity: 1 EA Purchase Request: 7018158351QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339114
New
DIBBS
Supply of Tungsten Carbide Dental Excavating Burs
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339114
New
DIBBS
RETAINER, MATRIX, DENTAL
Solicitation # SPE2DH-26-T-6468
This solicitation from the Department of Defense Medical Supply Chain FSH is for the procurement of a single sterile, single-use, and disposable Tofflemire dental matrix retainer. The device measures 7 inches in length by 2.75 inches in width and is designed to handle any width band, allowing for accurate trimming and easy insertion. It is compatible with contra-angles for both buccal and lingual use. The contract, identified by solicitation number SPE2DH-26-T-6468 and NSN 6520-01-700-8026, requires delivery within 5 days after the order. Bidders must specify the source and part number being supplied and adhere to DLA packaging requirements and technical quality standards. The response deadline for this federal acquisition is September 9, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
BUR, DENTAL, EXCAVATING
Solicitation # SPE2DS-26-T-395S
This solicitation, issued by the Department of Defense Medical Supply Chain, is for the procurement of tungsten carbide dental excavating burs, size 35. The requirement is for one package containing ten units, identified by NSN 6520-01-003-2267. Bidders are required to specify the source and part number being supplied, with a delivery timeline of 20 days after the order is received. The contract is subject to several technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. It also notes that covered defense information may apply. The solicitation is listed under NAICS code 339114, with a response deadline of September 8, 2026, and performance located at FPO 09514.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339114
New
DIBBS
WRENCH, TORQUE
Solicitation # SPE2DH-26-T-6448
This solicitation from the Department of Defense Medical Supply Chain FSH is for the procurement of three low torque indicating ratchet wrenches designed for restorative dental implant applications. These tools must be constructed from autoclavable, corrosion-resistant stainless steel and capable of measuring torque from 0 to 35 N.cm to ensure the precise tightening of prosthetic components and abutments. The contract requires adherence to DLA packaging standards and specific technical and quality requirements. Bidders must provide the source and part number for the items supplied. Delivery is required within five days after the order is placed, with the place of performance located at Fort Wainwright, Alaska.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
BUR, DENTAL, EXCAVATING
Solicitation # SPE2DS-26-T-394W
This solicitation, issued by the Department of Defense Medical Supply Chain, is for the procurement of size 4 tungsten carbide head dental excavating burs. The requirement is for one package containing ten units, identified by NSN 6520-01-003-2270. Delivery is required within 20 days after receipt of the order, with the place of performance located at FPO 96691. The contract is subject to DLA master technical and quality requirements, including specific packaging standards and the removal of government identification from non-accepted supplies. It strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except in specific functional cases. Bidders are required to specify the source and part number being supplied.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339114
New
DIBBS
SLEEVE, CURING LIGHT, DE
Solicitation # SPE2DH-26-T-6474
This solicitation, issued by the Department of Defense Medical Supply Chain, is for the procurement of single-use disposable barrier sleeves designed specifically for the Valo Grand dental curing light. These sleeves serve as a protective layer to prevent the buildup of germs and bacteria during dental procedures. The items are issued in packages of 100 units, and the specific National Stock Number for this requirement is 6520-01-730-0057. The contract requires the delivery of one package within five days after the order is placed. Bidders must specify the source and part number being supplied and adhere to DLA packaging requirements and technical quality standards. The performance location for this contract is in San Antonio, Texas, and the response deadline for the solicitation is September 9, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
SCALER, DENTAL
Solicitation # SPE2DH-26-T-6465
This solicitation from the Department of Defense Medical Supply Chain FSH is for the procurement of two dental scaler kits under solicitation number SPE2DH-26-T-6465. Each kit must include one 15/30 Towner and one McCall curette. The contract requires delivery within five days after the order is placed, with the point of performance located at FPO 09595. The supplier must adhere to specific technical and quality requirements, including DLA packaging standards and Medical Marking Standard No. 1. Items must be provided in sealed unit containers and shipped in commercial exterior packaging to ensure safe delivery. Bidders are required to specify the source and part number for the items supplied under NSN 6520-01-701-6776.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
CARTRIDGE, WATER
Solicitation # SPE2DH-26-T-6297
This solicitation, issued by the Department of Defense Medical Supply Chain, seeks the procurement of eight water cartridge assemblies for A-Dec 300 and 500 series dental delivery system control blocks. The required components feature a brass body, include three o-rings and a washer, and measure 0.7 inches in diameter by 1.2 inches in length with a weight of 0.07 lbs. The items are identified by NSN 6520-01-654-5076 and product device code 11165. The contract requires delivery within 20 days after the order is placed to McConnell AFB. Bidders must specify the source and part number being supplied and adhere to DLA packaging requirements and restrictions on the intentional addition of mercury. This federal acquisition is governed by the DLA Master List of Technical and Quality Requirements and requires compliance with standard FAR and DFARS clauses, including destination inspection and domestic sourcing restrictions.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339114
New
DIBBS
BUR, DENTAL, EXCAVATING
Solicitation # SPE2DS-26-T-394L
Solicitation SPE2DS-26-T-394L, issued by the DLA Troop Support Medical Supply Chain, is a request for quotations for dental excavating burs featuring tungsten carbide heads, size 559, 10S. The requirement consists of one package containing ten units under NSN 6520-01-003-2260. The delivery is specified as FOB Destination to the USS WASP LHD 1 at FPO AE 09514, with a delivery lead time of 20 days after order. Bidders are required to specify the source and part number being supplied. The contract is governed by NAICS code 339114 and incorporates several critical compliance and quality standards. Technical and quality requirements are dictated by the DLA Master List, and packaging must adhere to ASTM D3951, MIL-STD-129, and RP001, with specific medical marking standards applied. The procurement is subject to the Buy American Act and the Berry Amendment for quotes above the micro-purchase threshold. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to DFARS 252.204-7012 regarding the safeguarding of covered defense information. Inspection and acceptance will occur at the destination.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339114
New
DIBBS
STEAM CLEANER, DENTAL
Solicitation # SPE2DH-26-T-6444
This solicitation from the Department of Defense Medical Supply Chain FSH is for the procurement of two dental steam cleaners under NSN 6520-01-717-5233. The required equipment must feature a 2.2L stainless steel boiler with a 1.9L nominal water capacity, a 1000W external heating element, and a steam gun equipped with a six-foot hose and quick-connect fittings. Technical specifications include a 15 to 20 minute heat-up time, up to 4 hours of continuous steam, a low water light indicator, and an operating pressure of 3.5 bar with up to 50 PSI, including an eco mode. The contract requires compliance with DLA packaging requirements, the removal of government identification from non-accepted supplies, and adherence to covered defense information standards. Bidders must specify the source and part number being supplied. Delivery is required within 172 days after order, with the place of performance located in New Cumberland, Pennsylvania. The response deadline for this solicitation is September 9, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
TOOTH SAVER FLUID
Solicitation # SPE2DH-26-T-6475
Solicitation SPE2DH-26-T-6475, issued by the Department of Defense Medical Supply Chain, is a request for two units of Save-A-Tooth pH balanced cell culture fluid used for emergency tooth preservation. The item is identified by NSN 6520-01-518-2825 and falls under NAICS code 339114. The contract requires a delivery timeframe of five days after receipt of order, with performance located in San Antonio, Texas. The procurement is subject to specific technical and quality standards, including a non-extendable shelf life of 24 months as per requirement RS016. Bidders must comply with DLA packaging requirements, government identification removal protocols, and provide specific source and part numbers. The solicitation was posted on September 2, 2026, with a response deadline of September 9, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
Federal
TRIOS 5 Wireless Intraoral Dental Scanners - James H Quillen VAMC - Dental Service
Solicitation # 36C24926Q0361
The Department of Veterans Affairs, through the Network Contract Office 9, is seeking to procure seven TRIOS 5 Wireless Intraoral Scanners and accompanying workstations for the James H. Quillen VA Medical Center Dental Service. These tools are intended to modernize the facility's equipment, utilizing CAD/CAM software to scan teeth and soft tissue for the design of permanent fixed crowns, bridges, removable prostheses, and other dental requirements. The procurement includes the scanners, workstations, specialized tips, and five years of TRIO CARE coverage. This opportunity, identified by solicitation number 36C24926Q0361, is designated as a total Small Business Set Aside under NAICS code 339114. The place of performance is located in Mountain Home, Tennessee. Interested parties must submit their responses by September 14, 2026, at 3:00 PM. The primary point of contact for this requirement is Elizabeth Trimm.
249-NETWORK Contract Office 9 (36C249)

POSTED

1 day ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 423450
New
DIBBS
DXH 520 Hematology Analyzer Supply
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
Supply of Medical Cabinets (NSN 6530-01-738-3892)
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423460
New
DIBBS
Waxed Dental Floss Supplier
Ophthalmic Goods Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
Supply of Sterilization Wrappers (NSN 6530-01-216-9242)
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333248
New
DIBBS
Supply of Sterile Laboratory Scoops
All Other Industrial Machinery Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
ADJUSTMENT TOOL
Solicitation # SPE2DH-26-T-6458
This solicitation from the Department of Defense Medical Supply Chain FSH is for the procurement of five adjustment tools under solicitation number SPE2DH-26-T-6458. The tool is designed with a dual-purpose functionality, featuring one end for adjusting the clamping tension of articulating compression-type clamps and another end to serve as a lever for locking or releasing those clamps. Additionally, the tool must include a permanently attached wire lanyard with a locking pin to ensure it can be secured to the critical care platform. The contract requires adherence to DLA master lists for technical and quality requirements, specifically referencing packaging standards and the removal of government identification from non-accepted supplies. Bidders are required to specify the source and part number for NSN 6530-01-500-2319. The delivery timeline is set for 84 days after the order is placed, and the response deadline for this federal acquisition is September 9, 2026.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334515
New
DIBBS
ANALYZER, BLOOD GLUCOSE
Solicitation # SPE2DH-26-T-6451
This contract is a solicitation for the procurement of four kits of the Prodigy Pocket Blood Glucose Analyzer, identified by NSN 6630-01-690-1933. The device is a small, lightweight, no-coding meter that provides results in seven seconds and features a 120-test memory with various day averages. The procurement is managed by the Department of Defense Medical Supply Chain and is designated for performance at Fort Bliss. The supplier must adhere to specific technical and quality requirements, including DLA packaging standards and Medical Marking Standard No. 1. All units must be delivered in sealed containers capable of protecting the contents from damage. Bidders are required to specify the source and part number being supplied, with a delivery timeline of 20 days after the order is received.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
MASK, FACE, ASEPTIC
Solicitation # SPE2DH-26-T-6469
This contract is for the procurement of blue polypropylene aseptic face masks with ear loops and a bacteria filtration efficiency exceeding 95 percent. The requirement specifies a quantity of two packages, with each package containing 50 units. The item is identified by NSN 6532-01-346-0190 and part number 113-3008, with Patterson Dental Company listed as a CAGE 2V418 source. Because the device is regulated by the FDA, contracting officials must coordinate with product specialists for confirmation. Delivery is required within five days after order, with the destination set as Rose Barracks in Vilseck, Germany. Packaging must adhere to commercial standards, ASTM D3951, and DLA packaging requirements to ensure protection from damage during transit. Marking and labeling must comply with Medical Marking Standard No. 1. The contract is managed by the Department of Defense Medical Supply Chain under solicitation number SPE2DH-26-T-6469.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
LITTER, POLELESS, THERMA
Solicitation # SPE2DH-26-T-6441
Solicitation SPE2DH-26-T-6441 is a fixed-price request for quotations issued by the DLA Troop Support Medical Supply Chain FSH for the procurement of one package of disposable, poleless transport litters with thermal protection, identified by NSN 6530-01-657-19997. This acquisition is designated as a small business set-aside under NAICS code 339113. The required delivery is 20 days after receipt of order, with shipping terms set as FOB Destination to the DLA Distribution Management Office in Cherry Point, North Carolina. Inspection and acceptance will also take place at the destination. The product is regulated by the FDA as a Class I device, requiring compliance with registration, listing, labeling, and GMP requirements. All materials must be marked according to Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must be commercial, with each unit secured in a sealed container and packed in suitable exterior shipping containers to ensure safe delivery. The contract incorporates various FAR and DFARS clauses, including requirements for the Wide Area WorkFlow system for electronic invoicing and payment, as well as adherence to the Buy American Act and Berry Amendment.
Surgical Appliance and Supplies Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CYLINDER, UNGRADUATED, L
Solicitation # SPE2DH-26-T-6449
Solicitation SPE2DH-26-T-6449, issued by the DLA Troop Support Medical Supply Chain FSH on September 3, 2026, is a request for quotations for the procurement of ungraduated laboratory cylinders. The requirement specifies 600 ML cylinders constructed from borosilicate glass with an outer diameter of 51MM and an inner diameter of 360 MM. The unit of issue is each, and the delivery is required within 20 days after the order is received. The items are to be delivered FOB Destination to the USS ZUMWALT DDG 1000. The procurement is not a small business set-aside and requires compliance with various federal regulations, including the Buy American Act and the Berry Amendment. Technical and quality requirements are governed by the DLA Master List, specifically RA001, RP001, and RQ011. Packaging must adhere to ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials, with marking following Medical Marking Standard No. 1. Inspection and acceptance will occur at the destination. Quotations are due by September 9, 2026, and payment will be processed electronically through the Wide Area WorkFlow system.
Surgical Appliance and Supplies Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
DISPOSAL CONTAINER, HYP
Solicitation # SPE2DH-26-T-6454
This solicitation, identified as SPE2DH-26-T-6454 and issued by the Department of Defense Medical Supply Chain FSH, seeks the procurement of two hypodermic needle and syringe sharps tube disposal containers. The required containers must be between 6 to 7 inches in length and 1 to 2 inches in diameter, featuring a securable cap and a lift-off cover. The items are identified by NSN 6530-01-645-6923 and are to be delivered to Fort Richardson, Alaska, within 10 days after the order is placed. The procurement is governed by NAICS code 339113 and adheres to specific DLA technical and quality requirements, including RA001, RP001 for packaging, and RQ011 regarding the removal of government identification from non-accepted supplies. Additionally, the contract may be subject to covered defense information regulations under RD003. Quotes must be submitted through the DIBBS system by September 9, 2026, and the award may be processed automatically.
Surgical Appliance and Supplies Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334515
New
DIBBS
CHIP, CHLORINE
Solicitation # SPE2DH-26-T-6473
This contract is for the procurement of one chlorine chip for a chip-measurement-system analyzer with a measurement range of 0.20 to 10.0 PPM. The item is identified by NSN 6630-01-482-9263 and must be delivered within five days after receipt of the order. The acquisition is managed by the Department of Defense Medical Supply Chain FSH, with performance located in San Antonio, Texas. The product is subject to a strict 24-month non-extendable shelf life, and no more than three months may have elapsed from the date of manufacture to the date of delivery. Packaging must adhere to commercial standards and Medical Marking Standard No. 1, ensuring each unit is in a sealed container to prevent damage. All labels must clearly display the contract or lot number along with the manufacture and expiration dates. Compliance with DLA technical and quality requirements, including packaging and the removal of government identification from non-accepted supplies, is mandatory.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details