Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Testing & Commissioning of Sump Pump Systems

Active

Federal

Response Deadline08/21/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for comprehensive functional testing, performance verification, and commissioning of the 6P1 and 6P2 sump pump systems following their installation. This includes conducting load testing to ensure operational capacity under maximum demand, verifying alarm systems for proper activation and notification, and completing all necessary documentation to certify system readiness. The work must adhere to established technical standards and deliverables, with particular attention to reliability and safety in real-world conditions. This is a subcontract issued under a Total Small Business Set-Aside, classified under NAICS code 541330, and is managed by the International Boundary and Water Commission: US-Mexico. The opportunity was posted on July 22, 2026, with a response deadline of August 21, 2026. Performance is required at a location with zip code 78840. The contract is open exclusively to small business concerns as defined by the SBA, and no point of contact information is provided in the data.

General Info

Functional testing and commissioning of 6P1/6P2 sump pumps for small business under SBA set-aside at 78840.

Agency

International Boundary And Water Commission: Us-Mexico → Internat Boundary And Water CommissionView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

TX, 78840, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 21

Submission deadline

Response Deadline

08/21/2026, 09:00:00 PM UTCin 29 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyInternational Boundary And Water Commission: Us-Mexico → Internat Boundary And Water Commission

ContactsNo contacts available

OfficeN/A

Organization / Agency

International Boundary And Water Commission: Us-Mexico → Internat Boundary And Water Commission

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Functional testing, performance verification, and commissioning of both 6P1 and 6P2 sump pump systems post-installation, including load testing, alarm checks, and documentation.

Similar Contracts

Same NAICS industry code

First Article Testing (FAT) and Quality ComplianceThe contract requires execution of First Article Testing in strict accordance with the E08 FIRST ARTICLE TESTING REQUIREMENTS (MAR 2025) to verify full conformance to all specified technical data and to provide documented evidence of consistent and controlled manufacturing processes. This testing must demonstrate that the initial production units meet every design, performance, and quality criterion outlined in the technical documentation, ensuring that the supplier’s processes are capable of reproducibly delivering compliant products at volume. This is a subcontract issued under a Total Small Business Set-Aside by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, classified under NAICS code 541330, and is open exclusively to small businesses. The solicitation was posted on July 23, 2026, with a response deadline of August 24, 2026. The place of performance and point of contact details are not specified, but the full solicitation can be accessed via the provided DIBBS link, and all submissions must comply with the requirements for certification of process control and technical compliance as mandated by the referenced E08 standard.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services through an Indefinite Delivery Indefinite Quantity (IDIQ) contract for its major construction initiatives. These services span the full lifecycle of projects including planning, design, construction, and closeout phases, with a focus on supporting delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery strategies. Contractors will be expected to ensure projects meet defined schedules, budgets, and quality standards while assisting the Port in achieving its infrastructure objectives. The contract is classified under NAICS code 541330 and is open to firms capable of delivering high-level construction management expertise across a diverse portfolio of port-related developments. The primary point of contact for inquiries is Hala Rabbo, with additional support available through Project Manager Ann Davidson. The solicitation was posted on July 23, 2026, and interested parties can access further details through the Port’s official portal. While no set-aside type has been specified, the opportunity is targeted at firms with demonstrated experience in managing complex public infrastructure projects.

Construction Management

POSTED

about 8 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test adjust balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, operating within a 24/7/365 environment. Efforts will center on diagnosing and resolving system inefficiencies to enhance performance, energy efficiency, occupant comfort, reliability, and equipment longevity while ensuring strict compliance with safety and regulatory mandates. Scope includes assessment and optimization of mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems, with work initiated and directed through formal Service Directives issued by Aviation Facilities and Infrastructure. Collaboration with AV/F&I is mandatory to meet all project objectives and deliverables. The contract is structured as an indefinite-delivery/indefinite-quantity (IDIQ) under NAICS code 541330 with the Port of Seattle as the contracting agency. Primary point of contact is Jason Gates, reachable via phone or email, with Jim Farris serving as the project manager. The solicitation was posted on July 23, 2026, and all work will be performed at the airport. No set-aside designation has been specified, and the contract will be managed through the Port of Seattle’s procurement portal.

Aviation Facilities & Infrastructure

POSTED

about 8 hours ago

DEADLINE

FY26-DDOT-TPA-Streetcar PMCThe contract anticipates support for Streetcar 2.0 and its integration with connectivity infrastructure at RFK, focusing on planning, coordination, and implementation efforts to enhance public transit functionality in the District of Columbia. This forecasted procurement under the Department of Transportation (DDOT) is positioned for fiscal year 2026 and is intended to secure services that ensure seamless operational alignment between the expanded streetcar system and key transit hubs, particularly around the RFK site. The effort will likely involve technical oversight, system compatibility testing, and coordination with regional mobility initiatives to improve transit accessibility and efficiency. While specific financial details, timelines, or vendor requirements are not yet defined due to the forecast nature of the posting, the initiative signals a commitment to advancing sustainable urban transportation by expanding the streetcar network and linking it to major transportation nodes. The work will be performed within the District of Columbia, and while no set-aside provisions or NAICS codes are specified, the procurement is expected to involve specialized contractors with expertise in transit infrastructure, signal integration, and systems engineering. Stakeholder engagement and compliance with local transit goals will be critical components as the project moves from forecast to active solicitation.

Transportation (DDOT)

POSTED

about 8 hours ago

DEADLINE

FY26 -DOEE-WPD-Automated Rain Barrel ProtypeThe District of Columbia’s Department of Energy and Environment is forecasting a contract opportunity to design, build, and test a prototype automated rain barrel system that will discharge collected stormwater automatically prior to an anticipated storm. The goal is to create a smart, residential-scale solution that increases the capacity of rain barrels to capture more runoff during heavy rainfall events by preemptively emptying them, thereby enhancing stormwater management and reducing urban flooding. The prototype must be reliable, user-friendly, and suitable for widespread residential deployment, incorporating sensors or weather data integration to trigger discharge cycles based on forecasted precipitation. The project is part of FY26 planning under the DOEE’s Water and Pollution Division and is intended to support broader environmental resilience initiatives in the District. While specific funding details, timeline, and technical requirements have not yet been released, the solicitation is anticipated to seek proposals from innovators with expertise in IoT devices, hydrology systems, and environmental engineering. The prototype will be evaluated on functionality, durability, scalability, and potential for integration with municipal weather monitoring systems. Performance validation will include real-world testing under simulated storm conditions to ensure the system consistently and safely empties the barrel before rain arrives without causing overflow or infrastructure stress.

Energy and Environment (DOEE)

POSTED

about 8 hours ago

DEADLINE

FY26-DDOT-IPMA-Rehabilitation of the Mall Tunnel (TN#1142)The contract pertains to the preliminary engineering design phase, accounting for 30 percent of the total work, for the rehabilitation and repair of the Mall Tunnel designated as TN#1142 in Washington D.C. This phase is grounded in the findings of an inspection conducted between April 7 and April 24, 2024, which provided specific recommendations for addressing the tunnel’s structural and operational deficiencies. The design work will translate those inspection results into actionable engineering plans to prepare for full-scale rehabilitation efforts. The contract is listed under the District of Columbia Department of Transportation’s forecast for fiscal year 2026, with a posted date of July 23, 2026, indicating it is an anticipated procurement rather than an active solicitation. No solicitation number, set-aside details, or NAICS code are currently provided, and the place of performance is associated with the tunnel’s location in the District of Columbia, though specific address details are not listed. The procurement is managed by the District’s transportation agency with no publicly identified point of contact.

Transportation (DDOT)

POSTED

about 8 hours ago

DEADLINE

FY26-DDOT-TBSA-Work Zone Design and Work Zone Safety Transportation Management ProgramThe District of Columbia Department of Transportation is forecasting a contract for the FY26 Work Zone Design and Work Zone Safety Transportation Management Program, aiming to enhance the safety and efficiency of work zones across the city’s transportation infrastructure. This initiative will focus on developing and implementing comprehensive design standards and management strategies that minimize disruptions, protect workers and the public, and ensure seamless traffic flow during construction and maintenance activities. The program is expected to involve advanced planning, engineering expertise, and coordination with multiple stakeholders to align with evolving safety regulations and industry best practices. Although specific details such as funding amounts, contract duration, and selection criteria are not yet finalized, the solicitation is positioned as a forecast with a posted date of July 23, 2026, indicating it is a precursor to a formal procurement process. The work will be performed within the jurisdiction of the District of Columbia, with performance location and other administrative specifics yet to be determined. Interested parties should monitor official channels for the upcoming formal solicitation, as this forecast signals the agency’s intent to secure qualified contractors with specialized experience in transportation management systems, work zone safety protocols, and intelligent infrastructure design.

Transportation (DDOT)

POSTED

about 8 hours ago

DEADLINE

FY26-DOEE-WPD-Large Scale End-of-Pipe Stormwater ProjectThe District of Columbia’s Energy and Environment Agency is forecasting a contract for the feasibility study and design of a large-scale end-of-pipe stormwater project scheduled for fiscal year 2026. This initiative aims to address stormwater management through engineered solutions at critical discharge points, likely targeting urban runoff reduction, water quality improvement, and compliance with environmental regulations. The project will require detailed planning, technical analysis, and design development to ensure scalability, environmental suitability, and long-term operational effectiveness. Although no solicitation number or NAICS code has been provided yet, the forecast indicates the agency is preparing for a formal procurement process that will seek qualified contractors with expertise in civil engineering, hydrological modeling, and stormwater infrastructure. The place of performance is in the District of Columbia, with work expected to focus on specific end-of-pipe locations requiring intervention. The posting date reflects an early-stage forecast, allowing potential bidders time to review requirements and prepare proposals ahead of an anticipated solicitation. All further details including submission guidelines, evaluation criteria, and deadlines will be released through an official solicitation.

Energy and Environment (DOEE)

POSTED

about 8 hours ago

DEADLINE

FY26-DOEE-WPD-Kenilworth Park Wetland Restoration EA/DesignThe contract pertains to environmental assessment and design services for wetland restoration projects within Kenilworth Park in the Anacostia watershed, scheduled for fiscal year 2026 under the District of Columbia’s Department of Energy and Environment. The work will focus on planning and engineering activities necessary to restore and enhance the ecological function of the wetland areas, addressing habitat degradation, water quality, and natural resource conservation. The project is a forward-looking forecast, indicating future procurement activity, with no solicitation number yet assigned and no set-aside provisions specified, suggesting open competition for qualified firms with expertise in environmental engineering and ecological restoration. The location of performance is tied to Kenilworth Park in the District of Columbia, though precise address details are not provided in the posting. The agency responsible is the District of Columbia’s Energy and Environment (DOEE), which seeks to advance regional environmental resilience through this initiative. No point of contact information is listed, and the notice was posted on July 23, 2026, with an official link directing interested parties to the District’s contracting portal for updates. This forecast serves as an early indicator for potential bidders to prepare proposals aligned with regulatory requirements and ecological restoration best practices for federally and locally significant wetland systems.

Energy and Environment (DOEE)

POSTED

about 8 hours ago

DEADLINE

FY26-DDOT-TSA-Traffic Signal System Modernization System Management (Engineering Services)The District of Columbia Department of Transportation is planning a comprehensive modernization of its traffic signal infrastructure through a citywide deployment of advanced traffic signal controllers and a new central management system. This initiative aims to replace all existing legacy controllers with next-generation hardware capable of integrating emerging transportation technologies to enhance traffic flow, reduce congestion, and improve safety for all road users including pedestrians, cyclists, and public transit. The project encompasses both hardware upgrades and the implementation of a centralized software platform to monitor, manage, and optimize signal timing dynamically across the entire city network, increasing operational efficiency and infrastructure return on investment. Engineering services will be required to support the design, integration, testing, and deployment of this modernized system, ensuring seamless interoperability with existing transportation networks and future-proofing the city’s traffic management capabilities. The effort is scoped to deliver comprehensive improvements in multimodal mobility, with a focus on reducing delays, lowering emissions, and supporting equitable access to transportation. While specific procurement details such as set-aside status or NAICS code are not yet defined, the forecasted contract is anticipated to trigger formal bidding in FY26, with work performed citywide under the oversight of DDOT.

Transportation (DDOT)

POSTED

about 8 hours ago

DEADLINE

FY26-DDOT-TPA-Ped/bike Connection Across I-295/CSX Corridor Along East Capitol St. Alignment ProjectThe District of Columbia Department of Transportation is forecasting a feasibility study for a pedestrian and bicycle connection across the I-295 and CSX rail corridor along East Capitol Street. This project aims to evaluate viable alignment options to safely link communities on either side of the highway and rail line, enhancing nonmotorized transportation options and improving regional connectivity. The study will assess engineering, environmental, and community impacts to determine the most practical and beneficial design approach for a future multimodal crossing. The contract is scheduled for release in fiscal year 2026 and is managed under DDOT’s Transportation Planning and Analysis division. No solicitation number or set-aside details are provided at this stage, and the forecast is intended to give potential contractors and stakeholders advance notice to prepare proposals. The place of performance is expected to be within the District of Columbia, focused on the East Capitol Street corridor, with no specific office address or point of contact listed yet. The forecast provides a general timeline and scope to encourage early engagement and planning in advance of formal procurement.

Transportation (DDOT)

POSTED

about 8 hours ago

DEADLINE

FY26-DDOT-IPMA-Metropolitan Branch Trail - Blair Rd to Piney Branch Rd NWThe contract involves the construction engineering design for a multi-use trail extending from Blair Road and Aspen Street NW at the southern end to the intersection of Piney Branch Road and Eastern Avenue NW at the northern end, completing a critical connection between two existing segments of the Metropolitan Branch Trail along its western alignment as outlined in the Concept Plan. The scope encompasses comprehensive project management, coordination with multiple agencies, extensive public involvement efforts, and a full suite of technical services including surveying, mapping, right of way acquisition, traffic and utility analyses, geotechnical investigations, and detailed trail and structural design. Additional deliverables include storm drainage and stormwater management systems, sediment control measures, temporary traffic control plans, signing and pavement markings, lighting design, traffic engineering solutions, landscaping, and the preparation of full construction cost estimates, specifications, and quality assurance and quality control protocols to ensure compliance and durability.

Transportation (DDOT)

POSTED

about 8 hours ago

DEADLINE

More opportunities from International Boundary And Water Commission: Us-Mexico → Internat Boundary And Water Commission

Same awarding agency

Worn-Out Parts Replacement & SupplyThe contract titled Worn-Out Parts Replacement & Supply entails the supply and installation of degraded mechanical and electrical components including seals, bearings, couplings, and gaskets specifically for sump pump systems. This subcontract is designated as a Total Small Business Set-Aside under the SBA program, ensuring eligibility and participation are limited to small businesses as defined by federal regulations. The North American Industry Classification System code 423830 applies, indicating the work falls under wholesaling of plumbing and heating equipment and supplies. All performance activities are to be carried out at a location with a zip code of 78840, though the precise city and state are not specified. The opportunity was posted on July 22, 2026, and responses must be submitted no later than August 21, 2026, at 9:00 PM Eastern Time. The contracting entity is the International Boundary and Water Commission, United States-Mexico division, which oversees infrastructure maintenance along the U.S.-Mexico border. The contract does not identify a point of contact, and further details for submission and eligibility must be accessed through the provided SAM.gov link.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Column Pipe & Head Assembly Re-CoatingThe contract involves surface preparation, cleaning, and re-coating of a 12-inch column pipe and head assembly to mitigate corrosion and prolong operational life. All work must be performed in accordance with industry standards for protective coating applications, ensuring long-term durability and structural integrity. The project is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside designation, and the NAICS code 238290 applies to other building completion contractors. Performances will occur at a location with a zip code of 78840, and submissions must be received by August 21, 2026, at 9:00 PM. The solicitation is issued by the International Boundary and Water Commission, U.S.-Mexico branch, under a subcontract arrangement, and interested parties must respond through the official SAM.gov portal.

Other Building Equipment Contractors

POSTED

DEADLINE

Mechanical & Electrical Integration Services (6P2)The contract titled Mechanical & Electrical Integration Services (6P2) seeks a small business to perform comprehensive electrical and mechanical integration for the 6P2 sump pump system. This includes the installation and configuration of wiring, updated control systems, proper grounding practices, and implementation of system interlocks to ensure safe and reliable operation. The work is specifically scoped to support the functionality and compliance of the sump pump within its designated application, requiring technical expertise in both mechanical and electrical domains to meet operational standards. The contract is a total small business set-aside under NAICS code 238210, restricted to small businesses as defined by the SBA, with a response deadline of August 21, 2026. Performance will occur at a location with a ZIP code of 78840, under the oversight of the International Boundary and Water Commission, U.S.-Mexico division. The solicitation was posted on July 22, 2026, and all proposals must be submitted by the specified deadline to be considered. While no point of contact is listed, interested parties can access the full solicitation through the provided SAM.gov link for additional submission instructions.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Mechanical & Electrical Integration Services (6P1)The contract calls for comprehensive electrical and mechanical integration services for the 6P1 sump pump system, encompassing all aspects of wiring, control panel upgrades, grounding compliance, and implementation of system interlocks to ensure safe and coordinated operation. The work must be performed in alignment with industry standards and must fully integrate the sump pump into existing infrastructure, with particular attention to reliability and fail-safe functionality under operational demands. All tasks are scoped to deliver a fully functional, code-compliant system that meets specified performance and safety requirements. This is a total small business set-aside under NAICS code 238210, reserved exclusively for small businesses as defined by the SBA, and is categorized as a subcontract. The solicitation was posted on July 22, 2026, with a response deadline of August 21, 2026, at 9:00 PM. Performance is required at a location within zip code 78840 under the oversight of the International Boundary and Water Commission, U.S.-Mexico. The contract falls under the purview of the U.S. government agency responsible for boundary and water management, indicating that the delivered system will support critical infrastructure operations in a regulated environmental or border zone.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Sump Pump Replacement – 6P2 UnitThe contract entails the complete replacement of the 6P2 unwater and drainage sump pump, requiring full disassembly of the existing unit, precise installation of the new pump, proper alignment to ensure optimal performance, and thorough functional testing to verify system integrity and operational readiness. All work must be performed in compliance with industry standards and project-specific requirements to guarantee reliable long-term performance in the designated facility located in zip code 78840. The effort is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid, and the North American Industry Classification System code 333911 applies, which categorizes the work under pump and pumping equipment manufacturing. The solicitation was posted on July 22, 2026, with a response deadline of August 21, 2026, at 9:00 PM, and is managed by the International Boundary and Water Commission, U.S. Mexico, under the U.S. federal government procurement framework.

Pump and Pumping Equipment Manufacturing

POSTED

DEADLINE

Sump Pump Replacement – 6P1 UnitThe contract calls for the complete replacement of the 6P1 unwater and drainage sump pump with a commercial-grade unit, encompassing the full scope of removal of the existing pump, installation of the new system, and seamless integration with the current power and control infrastructure. The work must be performed in accordance with commercial standards to ensure operational reliability and long-term performance within the designated facility located in the 78840 zip code area. All tasks must be executed without disruption to surrounding systems and in compliance with applicable technical and safety requirements. This solicitation is structured as a subcontract under a Total Small Business Set-Aside, designated by the SBA, and falls under the NAICS code 333911 for other commercial and service machinery manufacturing. It was posted on July 22, 2026, with responses due by August 21, 2026. The contracting entity is the International Boundary and Water Commission, U.S.-Mexico, underscoring the critical nature of consistent water management at a federally managed site. Bidders must be certified small businesses eligible under the set-aside guidelines, and successful performers will be expected to meet all contractual obligations related to equipment quality, timelines, and system integration without reliance on external assistance beyond the scope of the bid.

Pump and Pumping Equipment Manufacturing

POSTED

DEADLINE

Replacement of 6P1 & 6P2 Unwater & Drainage Sump Pump, & Wore Out PartsThe United States Section of the International Boundary and Water Commission (USIBWC) is seeking a firm-fixed-price contract for the replacement of the 6P1 and 6P2 Unwater & Drainage Sump Pumps, worn-out parts, and re-coating of the existing 12-inch column pipe and head assembly at the Amistad Power Plant in Del Rio, Texas. This solicitation, numbered FY265281015, is issued as a combined synopsis and request for quote under FAR Subpart 12.6 and is exclusively for small businesses, with a 100% small business set-aside under NAICS code 333914, which has a size standard of 750 employees. Proposals must be submitted electronically via email to seone.jones@ibwc.gov by 3:00 PM MST on August 21, 2026, and must include an active Unique Entity ID (UEI), a completed FAR 52.212-3 representation and certification form, and a detailed price sheet. Participation is contingent upon submission of a comprehensive technical approach narrative detailing the plan of action, equipment, key team members, and project schedule, as well as at least three verifiable references for similar past projects, including contact information and project descriptions. Proposals lacking these components will be deemed non-responsive and ineligible for award. The government will select the lowest-priced technically acceptable offer, with technical acceptability determined solely on the basis of the submitted technical approach and past performance, and no trade-offs between cost and technical merit will be considered. Performance must be completed within 120 calendar days of contract award at the specified worksite, and all work must comply with OSHA 29 CFR 1910 and 1926, NFPA 70-2017, the Buy American Act, and other applicable federal and state regulations. A mandatory site visit is scheduled for August 6, 2026, at 11:00 AM CST, and all attendees must wear appropriate personal protective equipment and check in at the IBWC Main Office prior to entry. The contractor is responsible for securing all necessary permits, maintaining site security, adhering to restricted work hours of 7:00 AM to 3:30 PM Monday through Friday, and providing a minimum one-year warranty on all work and materials. Invoicing must be processed exclusively through the

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

DEADLINE

GIS SW Renewal ESRIThe United States International Boundary and Water Commission’s IT Department plans to award a sole source contract to Environmental Systems Research Institute, Inc. (ESRI) for the annual renewal of its GIS software support services, specifically focused on Web Portals, under Simplified Acquisition Procedures as outlined in FAR Part 13 and commercial item procedures under FAR Part 12. The requirement is classified under NAICS code 519290 with a product service code of 7A21, and no small business set aside is being applied; the SBA size standard for this sector is 1,000 employees. The justification for sole sourcing stems from the necessity to maintain continuity and compatibility with existing ESRI-based GIS systems, where no alternative provider can meet the operational requirements without significant disruption or cost. This notice serves only as an informational announcement and is not a solicitation; no formal bid documents are available, and unsolicited offers or telephone inquiries will not be accepted. Interested parties may submit a capability statement and letter of interest by 3:00 PM MST on August 6, 2026, to the designated point of contact, but must provide compelling evidence demonstrating that competition would be advantageous to the government. All communication must be sent in writing via email to angelica.baca@ibwc.gov with the specified subject line, and responses must ensure timely and complete delivery—failure to do so will result in disqualification. The government retains full discretion to proceed with the sole source award regardless of external input.

Web Search Portals and All Other Information Services

POSTED

DEADLINE

Record Drawings and As-Built Documentation

Engineering Services

POSTED

DEADLINE

in about 1 month

Joint Sealant and Expansion Joint Installation

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 1 month

Anchor Bolt and Fastener Supply

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

in about 1 month

Quality Control Testing and Professional Engineering Certification

Engineering Services

POSTED

DEADLINE

in about 1 month