Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Testing and Quality Assurance Services (QA/QC)

Active

Federal

Response Deadline09/04/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks third-party testing services to validate the environmental, electrical, and durability performance of mask light assemblies against stringent military standards including MIL-STD-810 and MIL-STD-202. These tests are critical to ensure the equipment can withstand extreme conditions encountered in military operations, such as temperature extremes, humidity, vibration, shock, and electromagnetic interference. The work will be performed in Philadelphia, and the scope includes comprehensive quality assurance and quality control procedures to confirm compliance, deliver verifiable data, and support certification requirements for deployment. This subcontract is issued under NAICS code 541380 for other scientific and technical consulting services and is managed by the Department of Defense through DLA Troop Support. The solicitation was posted on August 4, 2026, with a strict response deadline of September 4, 2026, at 7:00 PM Eastern Time. Interested parties must demonstrate technical expertise in military-grade testing protocols, established laboratory capabilities, and a proven track record of delivering accurate, auditable test results aligned with defense specifications. No set-aside provisions are specified, indicating open competition among qualified vendors.

General Info

Third-party testing of mask light assemblies per MIL-STD-810/202 in Philadelphia for DoD compliance.

Agency

Department Of Defense → DLA Troop SupportView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

Philadelphia, PA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineSep 4

Submission deadline

Response Deadline

09/04/2026, 07:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Troop Support

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA Troop Support

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Third-party environmental, electrical, and durability testing of mask light assemblies to validate compliance with military standards such as MIL-STD-810 and MIL-STD-202.

Similar Contracts

Same NAICS industry code

Electrical Systems Testing

Solicitation # 6365

The City of Salem, Oregon is soliciting bids for Electrical Systems Testing under Solicitation Number 6365, with a response deadline of August 19, 2026, at 6:00 PM Pacific Time. The bid opportunity was posted on August 4, 2026, and is open to qualified contractors capable of performing comprehensive testing of electrical systems in alignment with applicable codes and standards. All work is expected to be performed within the state of Oregon, though the specific location within the state has not been detailed. The primary point of contact for inquiries is the Contracts and Procurement office, reachable via email at contracts@cityofsalem.net. Bidders must submit their proposals through the official portal linked in the solicitation details, as no alternative submission methods are indicated. There is no set-aside designation specified for this solicitation, making it open to all eligible respondents regardless of business size or ownership category.

City of Salem, OR

POSTED

about 10 hours ago

DEADLINE

First Article Testing (FAT) and Production Lot Testing (PLT) ServicesThe contract requires the performance of First Article Testing and Production Lot Testing for a CSI item, encompassing the full scope of test execution, detailed documentation, and submission of results to government authorities. All testing activities must adhere to specified technical and procedural standards to ensure compliance with defense requirements, with deliverables including comprehensive reports and certified records for governmental review. The work is classified as a subcontract under NAICS code 541380, indicating it falls within the professional, scientific, and technical services sector, and is managed by the ASC Commodities Division under the Department of Defense. Responses to this solicitation must be submitted by September 4, 2026, with no set-aside designation specified, meaning it is open to all eligible contractors regardless of size or status. The place of performance and exact office address are not provided, but the work is tied to the Department of Defense’s procurement ecosystem, and all submissions must be made through the designated DIBBS portal. The contract does not include point of contact details, implying that all inquiries and submissions should follow standard DIBBS procedures for the referenced solicitation number SPE4A626R0192.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Drain Line Camera Inspection ServicesThe contract seeks qualified subcontractors to perform fiber-optic camera inspections of building sewer and drain lines to detect blockages, damage, or structural deficiencies, with inspections to be provided complimentary alongside drain cleaning services. The work is tied to infrastructure maintenance efforts by the State of Rhode Island under NAICS code 541380, which covers other professional, scientific, and technical services, and requires the use of specialized equipment to visually assess underground pipelines without excavation. The opportunity is open for bidding with a response deadline of August 25, 2026, and is intended to support the state’s ongoing efforts to maintain and upgrade its sanitary and drainage systems through proactive inspection and repair. All services must be performed in conjunction with cleaning operations, meaning the camera inspection is not a standalone task but an integrated component of broader line maintenance. The place of performance and contact details are not specified, but the work is expected to occur across facilities under the jurisdiction of the Rhode Island agency responsible for public infrastructure. Interested parties must submit proposals through the official state vendor bidding portal prior to the deadline, and compliance with technical standards for video inspection, documentation reporting, and coordination with cleaning crews will be essential. The contract does not include set-aside provisions for small or disadvantaged businesses, and award decisions will be based on qualifications, experience, and the ability to deliver inspection services that meet state operational requirements.

State of Rhode Island

POSTED

about 14 hours ago

DEADLINE

Alcohol and Controlled Substances Testing

Solicitation # 3344-26

Nueces County is seeking qualified vendors to implement a comprehensive alcohol and controlled substances testing program for its safety-sensitive employees, including approximately 30 commercial motor vehicle drivers subject to Federal Motor Carrier Safety Administration regulations, 750 additional employees covered under the Drug-Free Workplace Act of 1984, and up to 1,200 employees subject to reasonable suspicion testing. The contracted vendor must provide full-service testing capabilities including breath alcohol and split urine specimen collection, laboratory analysis, Medical Review Officer services, physical exams, respirator fit testing, immunizations, vision and audiometric screenings, and all related administrative and compliance support. The program must align with federal standards under 49 CFR Parts 40 and 382, including integration with the FMCSA Clearinghouse, and the vendor will be responsible for ensuring regulatory compliance, maintaining strict chain-of-custody protocols, and delivering timely and accurate reporting. The contract will run for an initial term of thirty-six months with the possibility of two twelve-month renewals, contingent on mutual agreement, and if no successor contract is awarded, the vendor must continue services on a month-to-month basis until replaced. Proposals must be submitted electronically via PublicPurchase.com by the deadline, with physical submissions accepted only if online access is unavailable, requiring one signed original and one PDF on a USB drive in a sealed envelope labeled with the RFP number and project name. The contract administrator is Jim Landers, Human Resources Director, and submissions should be directed to Michael Robinson, Purchasing Agent, at the Nueces County Courthouse. The county currently relies on Alliance for testing services, and the vendor selected will assume responsibility for all current and anticipated testing volumes, including projected increases in non-DOT tests over the next fiscal years. All required forms, qualifications, and documentation must be completed and submitted as specified, with no deviations permitted from the RFP requirements.

POSTED

about 15 hours ago

DEADLINE

Weighing and Scale Services

0409 Aq Hq Contract

POSTED

about 16 hours ago

DEADLINE

Materials Certification and Compliance Documentation

NASA Shared Services Center

POSTED

about 16 hours ago

DEADLINE

Accredited Laboratory Analysis for Stormwater ParametersThe contract requires an accredited laboratory to perform EPA-compliant analysis of stormwater samples for pH, total suspended solids, chemical oxygen demand, and recoverable metals including aluminum, lead, and zinc, strictly adhering to the methods outlined in 40 CFR Part 136. All testing must be conducted in accordance with federal regulatory standards to ensure data reliability and compliance with environmental monitoring requirements. The work is to be performed at a designated location in San Juan, Puerto Rico, under the oversight of the Department of Homeland Security’s LOG-9 office. This is a subcontract opportunity with a NAICS code of 541380, indicating it falls under other scientific and technical consulting services. The solicitation was posted on August 4, 2026, and responses are due by August 12, 2026, at 4:00 PM. The contract does not specify a type of set aside, and no point of contact information is provided. Interested parties must access the full solicitation details through the provided SAM.gov link to submit proposals and meet all procedural requirements for participation.

POSTED

about 16 hours ago

DEADLINE

FAA-Compliant Certification and Quality AssuranceThe contract requires full compliance with FAA regulations to ensure all parts used on U.S. Coast Guard aircraft are properly certified, traceable, and airworthy. This includes the issuance of Certificates of Conformity, rigorous verification of part traceability from origin to installation, and ongoing quality assurance processes to meet federal aviation standards. The work must be performed to guarantee that every component used in maintenance or repair operations on USCG aircraft is documented, authenticated, and conforms to all applicable airworthiness directives and manufacturing specifications. This is a subcontract under NAICS code 541380, posted on August 4, 2026, with a response deadline of August 6, 2026 at 3:00 PM. The contract is managed by the Aviation Logistics Center under the Department of Homeland Security, and performance is tied to operational needs within the U.S. Coast Guard’s aviation maintenance ecosystem. All deliverables must be submitted in a manner that meets the strict documentation and accountability requirements mandated by FAA and U.S. government aviation authorities, with no exceptions allowed for non-compliance.

Aviation Logistics Center (ALC)(00038)

POSTED

about 16 hours ago

DEADLINE

Automated Scanning System

Solicitation # N00421-27-NORFP-AB23000-0001

The U.S. Navy, through Naval Air Systems Command, intends to award a sole-source, firm-fixed-price contract to NDT Solutions for the development of an automated scanning system software suite utilizing artificial intelligence and machine learning to enhance nondestructive inspection capabilities for composite bond lines on MQ-4C aircraft. This effort supports the Air Systems Group’s Material Engineering Division, specifically the Nondestructive Inspection Branch, and is designed to assist NDI Level IIIs in detecting, sizing, and characterizing defects during phased array ultrasonic inspections using the AUSS Mobile system. The acquisition is justified under USC 2304(c)(1) and FAR 6.302-1 due to the unique and proprietary nature of the required technology, with no other source capable of meeting the agency’s specific needs. The contract will be processed under FAR Parts 12 and 13.5 as a commercial acquisition. This notice is not a solicitation for competitive bids but serves as an opportunity for other responsible parties to submit capability statements by 8:00 AM EST on August 19, 2026, to Liam Umek at liam.j.umek.civ@us.navy.mil solely to inform the government’s decision on whether to reopen the procurement for competition. No reimbursement will be provided for submissions, and all information provided becomes the property of the government. Offerors must be registered in the System for Award Management (SAM) to be considered. The delivered system will be shipped to the NDI Branch at 48066 Shaw Rd., Building 2188, Patuxent River, MD 20670, and the solicitation number for this action is N00421-27-NORFP-AB23000-0001, with a NAICS code of 541380.

POSTED

about 16 hours ago

DEADLINE

Test Pit and Soil Boring Advancement Phase II Environmental Site Assessment Royal Electric Yard, Sykesville, Maryland

Solicitation # 6913G626Q300046

Under an interagency agreement between the U.S. Department of Transportation’s John A. Volpe National Transportation Systems Center and the U.S. Environmental Protection Agency, a Phase II Environmental Site Assessment is being conducted at the Royal Electric Yard, a 4.1-acre parcel located at 7512 Main Street in Sykesville, Maryland, with the goal of investigating potential soil and groundwater contamination from historic automotive junking activities. A prior Phase I ESA identified likely presence of hazardous substances including used oils, brake and hydraulic fluids, gasoline, diesel fuels, mercury switches, asbestos, refrigerants, metals, batteries, and antifreeze, primarily in the northern wooded portion of the site, prompting the need for subsurface investigation. The scope includes advancing up to ten soil borings organized in a sitewide grid and up to six test pits near known debris piles, supported by geophysical surveys using electromagnetic conductivity, ground penetrating radar, and magnetometry to detect buried metallic and non-metallic objects. Sampling and analysis must adhere to ASTM E1903-19 standards, Maryland Department of the Environment residential soil cleanup criteria, and Volpe’s Generic Quality Assurance Project Plan and Standard Operating Procedures, with all samples requiring proper labeling, preservation, and shipping via approved containers, chain-of-custody documentation, and cooling to maintain integrity. The work is to be performed under a firm-fixed-price contract, fully funded at award for CLIN 00100, with a performance period from August 24 to December 1, 2026, and is set aside exclusively for small businesses. Contractors must possess valid certifications to execute the work, be registered in SAM with a current Unique Entity Identifier, and comply with extensive federal regulations including security prohibitions, data safeguarding requirements, service contract labor standards, Buy American provisions, and counter-trafficking policies. Proposal submission is required via email by August 11, 2026, and must include a completed SF-1449, a detailed firm-fixed-price breakdown covering labor, equipment, lab analysis, permits, and survey costs, and a two-page technical narrative demonstrating understanding of the work plan, site conditions, sampling methodology, and operational efficiencies. Deliverables include draft and final work plans, a call-before-you-dig notification, a geophysical survey report, and a final Phase II ESA report with analytical data, findings, and recommendations. All soil and debris deemed grossly contaminated must be segregated into metal drums or equivalent containers for offsite disposal

6913G6 Volpe National Transportation System Cntr

POSTED

about 16 hours ago

DEADLINE

USCG Base San Juan Stormwater Discharge Monitoring

Solicitation # 31170PRSDM

The US Coast Guard Base in Old San Juan, Puerto Rico, is seeking quotes for stormwater discharge monitoring services under solicitation number 31170PRSDM, with a response deadline of August 12, 2026 at 4:00 PM. A mandatory site visit is scheduled for August 6, 2026, at 9:00 AM, and interested parties must review the attached Statements of Work prior to attending. Access to the facility requires coordination with the designated points of contact, Abdiel J. Garraton and Dagmar Torres, who can provide necessary details for entry. Quotes must be submitted to juan.e.caporoure2@uscg.mil and must reference the notice ID in the email. The effort falls under NAICS code 541380 and is not subject to any small business set-aside. The contracting office is located in Norfolk, Virginia, under the Department of Homeland Security’s LOG-9 division.

POSTED

about 16 hours ago

DEADLINE

Laboratory Sample Analysis (if applicable)

City of San Jose

POSTED

about 21 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Troop Support

Same awarding agency

Precision Metal Stamping and Spring Component SupplyThe contract requires the manufacture of small metal clips, springs, and conductive components specifically designed for use in mask light switches and mounting hardware, with stringent demands for tight tolerances and corrosion resistance to ensure reliability in demanding environments. The components must meet exacting engineering specifications to function properly within critical defense systems, necessitating advanced precision metal stamping and spring fabrication capabilities. All work must be performed in compliance with defense industry standards for quality, durability, and material integrity. This subcontract opportunity is issued under NAICS code 332618 and is administered by the Department of Defense through DLA Troop Support, with performance required in Philadelphia. Interested parties must submit responses by the deadline of September 4, 2026, to be considered for award. The solicitation does not specify a set-aside status, and while no point of contact is provided, the opportunity is publicly accessible via the SAM.gov platform for further details and application submission.

Other Fabricated Wire Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Electrical Wiring and Connector Harness FabricationThe contract calls for the fabrication of miniature, high-reliability wiring harnesses and connectors specifically designed for internal electrical routing within oxygen mask light assemblies. These components must meet stringent performance standards to ensure operational integrity in critical environmental conditions, with precision manufacturing and rigorous quality controls being essential to guarantee consistency and durability. The work is intended for use in defense-related life-support equipment, necessitating materials and assembly techniques that withstand extreme stress, vibration, and exposure to oxygen-rich atmospheres. This is a subcontract opportunity posted by DLA Troop Support under the Department of Defense, with a North American Industry Classification System code of 335313, indicating specialization in electrical equipment manufacturing. The response deadline is September 4, 2026, and performance is expected to take place in Philadelphia. Although the solicitation number and point of contact details are not provided, the place of performance and agency involvement confirm the contract’s alignment with military logistics and personnel protection systems, requiring proposers to demonstrate proven experience with miniaturized, mission-critical electrical systems in defense applications.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Miniature LED Lighting Module SupplyThe contract solicits the supply of ruggedized, low-voltage LED modules specifically engineered for integration into aviation mask light assemblies, requiring stringent resistance to vibration and thermal stress to ensure reliable performance in harsh aerospace environments. These modules must meet exacting mechanical and environmental standards to function consistently under extreme conditions typical of military aviation use, with a focus on durability, energy efficiency, and long-term operational stability. The procurement is structured as a subcontract under NAICS code 334418, indicating classification within the other computer equipment manufacturing sector, and is being managed by DLA Troop Support under the Department of Defense to support critical defense systems. The contract was posted on August 4, 2026, with a firm response deadline of September 4, 2026, at 7:00 PM, allowing potential suppliers a thirty-one-day window to submit proposals. Performance will be localized to Philadelphia, though no specific address or point of contact details are provided. The solicitation does not designate a set-aside type, indicating it is open to all eligible vendors without restrictions based on small business, veteran-owned, or other categories. Bidders must be prepared to demonstrate technical capability, production capacity, and adherence to military-grade ruggedization standards without reliance on external documentation or cited compliance frameworks.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Precision Injection Molding of Light Housing ComponentsThis contract involves the precision injection molding of plastic or composite housing components specifically designed for aviation oxygen mask light assemblies, requiring adherence to strict military specifications. The work demands high tolerances, consistent material integrity, and reliable performance under demanding operational conditions, typical of defense aerospace applications. The manufacturer must demonstrate capability in advanced molding processes, quality control systems, and compliance with the necessary defense standards to ensure safety and functionality in mission-critical environments. The contract is classified as a subcontract under NAICS code 326199, with a response deadline of September 4, 2026, and is sponsored by the Department of Defense through DLA Troop Support. Performance is expected to take place in Philadelphia, and the procurement is open to qualified suppliers capable of meeting the technical and regulatory requirements without a specified set-aside designation. Interested parties must respond by the deadline to be considered for award, with no public point of contact listed and full details accessible through the provided SAM.gov link.

All Other Plastics Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 1 month

UGR-E Heater Trays

Solicitation # SPE3S126R0009

The UGR-E Heater Trays solicitation, identified by number SPE3S1-26-R-0009, is issued by the Defense Logistics Agency Troop Support under the Department of Defense, with the primary point of contact being James Kahn at the Philadelphia office in Pennsylvania. The solicitation, posted on August 4, 2026, requires responses by September 7, 2026, at 7:00 PM Eastern Time, and is open to all eligible offerors with no specific set-aside requirements. The North American Industry Classification System code is 311999, indicating it relates to other food manufacturing, and the place of performance is designated as Philadelphia, Pennsylvania, with the same zip code as the office address. Primary and secondary points of contact are provided for inquiries, and any issues accessing the solicitation attachments should be directed to James Kahn’s email. The opportunity is accessible via the SAM.gov platform for interested vendors to review details and submit proposals.

All Other Miscellaneous Food Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Food Equipment Ft Lee

Solicitation # 7017590626

The U.S. Department of Defense, through DLA Troop Support, has issued a request for interest regarding food service equipment and potential installation services at Fort Lee, Virginia. This is not a formal solicitation but an informational gathering to assess industry capability and interest. The equipment under consideration includes a wide range of food service items such as pizza preparation refrigerators, conveyor ovens, roll-in refrigerators, heated food warmer shelves, mobile counters with sneeze guards, mobile pleate and dish dispensers, hot food wells, heated cabinets, work tables, possible modifications to existing food stations, rotisserie ovens, induction ranges, refrigerated display cases, sandwich and salad preparation refrigerators, wire shelving, soup kettles, ice makers, pizza pans, small wares, containers, and china sets. Interested parties must respond by the deadline of August 7, 2026, at 7:00 PM Eastern Time, with submissions directed to the primary point of contact, Adam Pollini, at adam.pollini@dla.mil or 215-737-0766, with Timothy Coyle as the secondary contact. The office handling this request is located in Philadelphia, Pennsylvania, and the anticipated performance location is Fort Lee, Virginia. This request seeks feedback on availability, lead times, and technical specifications to inform a potential future solicitation.

Showcase, Partition, Shelving, and Locker Manufacturing

POSTED

DEADLINE

Army Green Service Uniform All Weather Coat

Solicitation # SPE1C126R0115

This contract solicitation, identified as SPE1C1-26-R-0115, is a total small business set-aside for the procurement of Men’s Army Green Service Uniform (AGSU) All-Weather Coats (AWC) under NSN 8405-01-683-8982 and PGC 00181, manufactured in strict compliance with MIL-DTL-32768A with Amendment 1, effective March 31, 2026, and pattern specifications dated May 22, 2026. The acquisition is structured as two separate Indefinite Delivery/Indefinite Quantity (IDIQ), Firm Fixed Price contracts, each with a 50% split of the total requirement, ensuring equal opportunity for small businesses. Each lot carries a guaranteed minimum order of 16,650 units annually over a 60-month period, with an Annual Estimated Quantity of 66,600 units and a maximum capacity of 499,500 units per lot across the contract term. All items must be 100% manufactured in the United States using 100% U.S.-sourced materials, adhering to the requirements of the Berry Amendment and DFARS 252.225-7012, with no foreign content permitted. Pricing is strictly based on F.O.B. Destination for all deliveries, with inspection and acceptance occurring at the destination for standard orders and at the origin only for depot stock orders. The initial delivery will be sent to the Travis Association for the Blind in Austin, TX, with subsequent orders issued every 120 days after award. Evaluation for award is based on a trade-off process where technical merit is prioritized over price, in the order of Product Demonstration Models (PDM), Past Performance Confidence Assessment, and Proposed Price. Offerors must submit one PDM of size 40R from each proposed place of performance, and must also provide their past performance history from the prior three years. The solicitation explicitly prohibits Lowest Price Technically Acceptable (LPTA) evaluation and allows for award to be made to the offeror with the highest overall value, not necessarily the lowest price. Packaging and labeling must conform to MIL-S-29368, MIL-STD-129 with Change Notice 3, and MIL-DTL-32075,

Apparel Knitting Mills

POSTED

DEADLINE

Final Packaging and PreservationThis contract requires the final packaging and preservation of finished coats in strict accordance with military standards to ensure complete protection during transport and storage. The work demands the use of preservation methods that safeguard both the material integrity of the coats and the legibility of all labels, ensuring long-term readiness and usability. All packaging must meet stringent defense specifications to prevent degradation, contamination, or damage under varying environmental conditions encountered during logistical operations. The opportunity is a subcontract under a Small Business Set Aside designation, fully reserved for small businesses as defined by the SBA. It is classified under NAICS code 424210, indicating a focus on apparel and accessory merchant wholesalers. The contract was posted on July 28, 2026, with a response deadline of August 12, 2026, at 7:00 PM. Performance is expected to occur at a location identified by the ZIP code 57551, under the oversight of DLA Troop Support, a division of the Department of Defense. Participation requires full compliance with military packaging protocols and a commitment to maintaining the highest standards of quality and accountability.

Drugs and Druggists' Sundries Merchant Wholesalers

POSTED

DEADLINE

Military-Compliant Labeling and BarcodingThis contract requires the production and application of permanent labels and barcode tags that meet MIL-DTL-32075 military specifications for identifying individual garments used by the U.S. military. Each label must include encoded NSN and UPC data to ensure accurate tracking and inventory management across the defense logistics system. The work must be performed in compliance with all federal standards for durability, legibility, and field performance under extreme environmental conditions. Only small businesses are eligible to compete, as this is a Total Small Business Set Aside under NAICS code 323113, which covers printing and related support activities. The opportunity was posted on July 28, 2026, with proposals due by August 12, 2026, and performance is expected to be executed at the designated location associated with the 57551 zip code. The contracting activity falls under DLA Troop Support, a division of the Department of Defense responsible for sustaining military personnel with essential supplies and equipment.

Commercial Screen Printing

POSTED

DEADLINE

U.S.-Sourced Fabric Supply (Taffeta, Batting, Binding)The contract seeks the supply of domestically produced taffeta, batting, and binding materials that meet stringent military specifications under MIL-DTL-32768A and comply with the Berry Amendment, ensuring all materials are fully manufactured in the United States for use in military uniform production. The requirements emphasize strict adherence to quality and origin standards, with no sourcing allowed from foreign suppliers or components. This subcontract is designated as a Small Business Set Aside under the SBA, reserving full participation for qualifying small businesses as defined by the North American Industry Classification System code 313310, which covers textile mills involved in fabric manufacturing. The solicitation was posted on July 28, 2026, with a response deadline of August 12, 2026, at 7:00 PM Eastern Time. The contracting activity falls under DLA Troop Support, a division of the Department of Defense, and the performance location is identified with a ZIP code of 57551. All materials must be sourced, processed, and assembled entirely within the U.S. to satisfy federal procurement regulations, and bidders must demonstrate full compliance with domestic sourcing mandates. No foreign content is permitted, and successful vendors will supply critical textile components for standardized military apparel under a firm commitment to national security and industrial base integrity.

Textile and Fabric Finishing Mills

POSTED

DEADLINE

Insulated Liner Production (Channel-Quilted)The contract is for the manufacture of a removable insulated liner constructed with taffeta and batting layers featuring channel quilting, designed to meet specific military thermal and dimensional performance standards. The work must adhere to rigorous defense requirements to ensure consistent insulation properties, durability, and fit under operational conditions. The solicitation is a subcontract opportunity under a Small Business Set Aside, exclusively available to small businesses, with the NAICS code 315999 indicating classification under other textile product mills. Performance of the work is designated for the location identified by the zip code 57551. The contract was posted on July 28, 2026, with a firm response deadline of August 12, 2026, at 7:00 p.m. Eastern Time. The awarding agency is the Department of Defense through DLA Troop Support, which manages logistics and supply for U.S. military forces. The opportunity is accessible through the SAM.gov platform, and bidders must submit proposals within the specified timeframe to be considered. No point of contact information is provided in the public data, and the place of performance does not specify a city or state beyond the zip code. Contractors must ensure compliance with all military specifications and be prepared to demonstrate capacity for precision fabrication and quality control appropriate to defense applications.

Other Apparel Accessories and Other Apparel Manufacturing

POSTED

DEADLINE

Full-Assembly Military Coat ManufacturingThe contract requires full manufacturing of an all-weather men's military coat adhering strictly to MIL-DTL-32768A with Amendment 1 specifications, encompassing every stage of production from cutting and sewing to quilting and final inspection. A critical component is the integration of a removable insulated liner and the use of safety stitching to ensure durability and compliance with military standards under extreme conditions. The work must be performed by a small business as this is a Total Small Business Set Aside under NAICS code 315191, designated for apparel manufacturing. The solicitation was posted on July 28, 2026, with a firm response deadline of August 12, 2026, at 7:00 PM, and the performance location is designated as ZIP code 57551. The contract is issued under DLA Troop Support, a division of the Department of Defense, and is structured as a subcontract opportunity.

Outerwear Knitting Mills

POSTED

DEADLINE