Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Testing, Commissioning, and Documentation

Active
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract encompasses system testing, commissioning, and comprehensive documentation services including training for personnel, as-built submittals, and certification reports. The work is classified under NAICS code 541690 and is structured as a subcontract within the procurement framework managed by the California agency. All deliverables must meet stringent requirements to ensure systems are fully operational, properly documented, and certified prior to handover. The solicitation was posted on July 14, 2026, with a firm response deadline of September 1, 2026, at 6:00 PM. Performance location details are unspecified, and no set-aside provisions or point of contact information are provided in the data. Interested parties must submit proposals through the designated portal before the deadline to be considered.

General Info

System testing, commissioning, and documentation services due September 1, 2026, under California agency subcontract.

Agency

California → ProcurementView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

CA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyCalifornia → Procurement
ContactsNo contacts available
OfficeN/A
Organization / Agency
California → Procurement
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
System testing, commissioning, and documentation including training, as-built submittals, and certification reports.

Similar Contracts

Same NAICS industry code

NAICS: 541690
New
SLED
ADA CONSULTANTMHMR of Tarrant County is soliciting proposals from qualified consultants to deliver comprehensive Americans with Disabilities Act (ADA) consulting services aimed at ensuring full compliance with federal, state, and local accessibility regulations. The selected consultant will be responsible for conducting detailed accessibility assessments of facilities, programs, services, and digital assets, identifying existing compliance gaps, and providing actionable recommendations for corrective measures. In addition to evaluating current conditions, the consultant will support the development and implementation of long-term ADA compliance strategies, offering ongoing technical guidance and delivering training to staff to foster an organizational culture of accessibility and inclusion. Proposals must be submitted by August 6, 2026, at 8:30 PM CT, and inquiries should be directed to Rebecca Walsh, Procurement Manager, or Randall Elder, Procurement Buyer, through the provided contact information. The contract will be managed by MHMR of Tarrant County, located in Fort Worth, Texas, with performance expected to occur across its service areas within the state. The solicitation number is RFP26019, posted on July 22, 2026, and is open to firms or individuals with demonstrable expertise in ADA compliance, accessibility standards, and regulatory requirements applicable to public sector entities. All relevant documentation is available via the official procurement portal linked in the solicitation details.
MHMR OF TARRANT COUNTY

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Packaging ServicesThe contract seeks specialized subcontracted services to ensure full regulatory compliance for hazardous materials handling, with a focus on Safety Data Sheet preparation, military-compliant packaging, and labeling adhering to MIL-STD-129 and OSHA standards. The work requires precise alignment with federal safety and transportation regulations to support defense supply chain operations, ensuring all hazardous materials are documented, packaged, and marked in accordance with strict military and occupational safety protocols. The subcontractor must demonstrate expertise in both environmental compliance and defense logistics to meet the stringent requirements of the Department of Defense. This opportunity is designated as a Total Small Business Set-Aside under the NAICS code 541690, reserved exclusively for small business entities and administered by the Maritime Supply Chain division of the Department of Defense. Proposals must be submitted by August 6, 2026, following the July 22, 2026 posting date, with performance likely centered on defense-related logistics centers, though specific locations are not detailed. The subcontractor will be expected to deliver consistent, auditable compliance outcomes critical to safe and lawful hazardous material movement within military supply networks.
MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Labeling and ComplianceThe contract requires the design, production, and submission of fully compliant labels for hazardous materials in accordance with OSHA Hazard Communication Standard, Consumer Product Safety Act, Federal Hazardous Substances Act, and MIL-STD-129. All labels must include standardized GHS pictograms and be matched with accurate Safety Data Sheets to ensure regulatory alignment across federal, military, and consumer safety frameworks. The work is to be performed in Tracy, California, with a submission deadline of July 28, 2026, and falls under the NAICS code 541690 for other scientific and technical consulting services. This subcontract is issued by the Department of Defense through DLA Dist San Joaquin and is not set aside for any specific small business category. Compliance with exact specifications and timely delivery are essential, as failure to meet requirements could affect supply chain safety and operational readiness.
DLA DIST SAN JOAQUIN

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling SupportThe contract seeks regulatory compliance support for hazardous materials, focusing on the preparation and submission of hazard warning labels and Material Safety Data Sheets in accordance with DFARS and OSHA requirements. This subcontract is issued by the Department of Defense through its San Diego office, with performance expected to occur in San Diego, California, at ZIP code 92136-3581. The work is classified under NAICS code 541690, indicating it involves other scientific and technical consulting services, specifically related to hazardous material documentation and regulatory adherence. Interested parties must submit responses by August 3, 2026, and the opportunity was posted on July 22, 2026, with no set-aside type specified, leaving it open to all eligible subcontractors. The contract does not include a designated point of contact, and all inquiries must be directed through the provided DIBBS link.
SAN DIEGO

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and LabelingThis contract requires strict adherence to hazardous materials compliance standards, mandating the correct application and management of hazard warning labels and Safety Data Sheets in accordance with DFARS 252.223-7001 and OSHA 29 CFR 1910.1200. The work involves ensuring all hazardous materials used or handled under the subcontract meet federal regulatory requirements for labeling, documentation, and information dissemination to protect worker safety and regulatory compliance. The subcontract falls under NAICS code 541690 and is issued by the Department of Defense under the CONTRACTATION & EQUIPMENT MRO SVC I contract vehicle, with responses due by July 29, 2026. The place of performance and specific location details are not provided, but the obligation extends to all sites where covered materials are present, requiring consistent and auditable processes across operations.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract seeks consulting services focused on hazardous materials labeling, Safety Data Sheet management, and regulatory compliance specifically tailored to support defense manufacturing operations. The work is tied to the NAICS code 541690, indicating it falls under other scientific and technical consulting services, and is structured as a subcontract under the Department of Defense, with the contracting activity listed as Construction & Equipment MRO SVC I. Performance of the services is required at a designated location in New Cumberland, Pennsylvania, with the zip code 17070-5002 serving as the official place of performance. All deliverables must satisfy federal defense regulations surrounding the handling, documentation, and labeling of hazardous substances used in military production environments. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, indicating a narrow window for proposal submission. The contract does not specify a set-aside type, meaning it is open to all eligible contractors without preference for small businesses or other categories. There is no designated point of contact listed, and details on the contracting office’s physical address are incomplete. Interested parties must access the official portal via the provided DIBBS link to obtain full solicitation documents and submit compliant proposals. The scope demands expertise in navigating complex defense-related compliance frameworks and ensuring all hazardous material documentation aligns with current OSHA, DOT, and DoD standards.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Material Compliance & Safety Data ManagementThe contract titled Hazardous Material Compliance & Safety Data Management requires the identification, classification, and thorough documentation of hazardous materials in alignment with Department of Defense standards. Key deliverables include the authoring of Safety Data Sheets and the application of proper hazard labeling to ensure regulatory compliance across all applicable operations. The work is scoped for performance in Tracy, California, with a zip code of 95304-5000, and is structured as a subcontract under a Total Small Business Set-Aside, designated for firms certified by the Small Business Administration. The North American Industry Classification System code for this opportunity is 541690, indicating it falls under other scientific and technical consulting services. All proposals must be submitted by August 3, 2026, and the solicitation was posted on July 22, 2026, with bidding to be conducted through the DIBBS system. Compliance with DoD safety and documentation protocols is mandatory, and contractors must demonstrate expertise in hazardous materials management to meet stringent federal requirements.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Labeling ServicesThe contract seeks services to ensure full compliance with hazard communication standards by preparing safety data sheets and labeling hazardous materials in alignment with OSHA and military regulations. The work must adhere to stringent federal and defense-specific requirements to safeguard personnel and maintain operational integrity across facilities under the Department of Defense. Performance is required at the specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. This subcontract, classified under NAICS code 541690, is open for bidding with responses due by August 3, 2026. The solicitation was posted on July 22, 2026, and is managed under the Construction & Equipment MRO SVC I contract vehicle. All providers must demonstrate expertise in hazardous material documentation and labeling, with an understanding of both civilian regulatory frameworks and military compliance protocols. The contract emphasizes accurate, timely delivery of compliance services to support DOD operations and environmental safety standards.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Military-Compliant Packaging, Labeling, and Hazard CommunicationThis contract requires the provision of certified packaging, hazard labeling, and Material Safety Data Sheet (MSDS) submission services to meet stringent compliance standards mandated by OSHA, MIL-STD, and the Defense Logistics Agency. All deliverables must align with federal military specifications to ensure safe handling, transportation, and storage of hazardous materials within Department of Defense supply chains. The work is to be performed at a military postal address in FPO with zip code 09587, and all documentation must adhere to DLA-specific formats and procedural requirements. The solicitation is a small business set-aside under the SBA program, specifically reserved for total small business concerns as defined by FAR 19.5, with a NAICS code of 541690 for other professional, scientific, and technical services. Interested parties must submit responses by the deadline of August 3, 2026, and the contract is structured as a subcontract under the Land Supply Chain division of the Department of Defense. Technical rigor, regulatory precision, and complete traceability in labeling and hazard communication are essential to meet performance expectations and avoid non-compliance penalties.
LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Packaging and Marking Compliance ServicesThe contract requires full compliance with MIL-STD-2073-1E and MIL-STD-129 standards for the packaging and marking of capacitor units, including precise barcoding systems and appropriate hazardous materials labeling to meet federal military specifications. All work must be performed under a Small Business Set-Aside classification as defined by the SBA, ensuring eligibility and participation by qualified small businesses. The solicitation falls under NAICS code 541690 and is issued by the Department of Defense through the Maritime Supply Chain office, with a response deadline of August 6, 2026, and a posting date of July 22, 2026. The place of performance and point of contact details are not specified, but the contract is accessible through the DIBBS system for further information.
MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & SDS ManagementThe contract requires comprehensive hazardous materials documentation and regulatory compliance support specifically for the packaging and handling of a shielding gasket, ensuring all applicable transportation, storage, and handling regulations are met. This includes the preparation and maintenance of Safety Data Sheets (SDS) that adhere to current global standards, as well as ongoing support to maintain compliance with federal and international hazardous materials regulations throughout the product lifecycle. The work is tied directly to the physical characteristics and chemical composition of the shielding gasket, necessitating precise technical understanding and accurate documentation to mitigate risk during logistics and use. This subcontract is issued under NAICS code 541690 for other scientific and technical consulting services and is managed by the ACTIVE DEVICES DIVISION within the Department of Defense. Performance is designated to occur at FPO, ZIP 96607, indicating military or operational locations may be involved. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, emphasizing a tight turnaround for qualified vendors. While no specific set-aside designation is listed, participation is expected from entities capable of delivering specialized hazardous materials expertise within the defense supply chain, likely requiring prior experience in defense-related compliance and documentation.
ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and LabelingThe contract requires full compliance with OSHA and DFARS regulations for the labeling and documentation of hazardous materials associated with solenoid assemblies, ensuring all safety data sheets and physical labels meet federal standards for workplace safety and defense supply chain integrity. The work involves accurate identification, classification, and labeling of chemical hazards in accordance with OSHA’s hazard communication standard and DFARS requirements for defense contractors, with strict adherence to documentation protocols that support traceability and regulatory audits. This is a subcontract under NAICS code 541690, issued by the Department of Defense through the Maritime Supply Chain organization, with a response deadline of August 6, 2026. The place of performance and point of contact details are not specified, indicating the work may be performed at the subcontractor’s facility or as directed by the prime contractor. Compliance must be maintained throughout the lifecycle of the solenoid assemblies to satisfy defense procurement mandates and ensure uninterrupted supply chain operations.
MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details

More opportunities from California → Procurement

Same awarding agency

NAICS: 335313
SLED
Subcontractor Supply of MaterialsThe contract involves the supply of a range of compliant construction and safety materials, including electrical conduits, cables, rebar, concrete, and hazardous material containers, all of which must meet specified regulatory and quality standards. Each item must be accompanied by the appropriate Safety Data Sheets to ensure full compliance with safety and environmental protocols. The solicitation is classified as a subcontract under NAICS code 335313 and is open for responses until September 1, 2026. The materials are intended for use within California, though exact delivery locations are not specified, and the procurement is managed by the California agency under the Procurement office. Bidders must ensure all products are properly documented and certified, with no set-aside provisions applied, making this an open competition for qualified suppliers.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

9 days ago

DEADLINE

in about 1 month
View Details
NAICS: 238110
SLED
Concrete Systems and Structural WorkThe contract encompasses all aspects of concrete systems and structural work, including the setup of formwork, precise placement, and final finishing of concrete structures to comply with ACI 318 and ASTM standards. This work requires strict adherence to industry specifications for durability, safety, and structural integrity, ensuring that all concrete elements meet the highest engineering and quality benchmarks. The scope demands skilled labor, proper materials, and rigorous quality control throughout every phase of execution. This is a subcontract opportunity posted on July 14, 2026, with a submission deadline of September 1, 2026. It falls under NAICS code 238110 for concrete work and is managed by the Procurement agency under California. The place of performance and exact location details are not specified, and no set-aside classification is indicated. Interested parties must respond through the provided portal link before the deadline to be considered for award.
Poured Concrete Foundation and Structure Contractors

POSTED

9 days ago

DEADLINE

in about 1 month
View Details
NAICS: 238220
SLED
Instrumentation and Level Measurement SystemsThe contract entails the supply, installation, calibration, and commissioning of level sensors and control systems designed for wetwell monitoring, specifying a comprehensive scope that covers the full lifecycle of the instrumentation from delivery to operational readiness. The work is categorized under NAICS code 238220, indicating it falls within the electrical and wiring installation sector, and is structured as a subcontract with no set-aside provisions. The solicitation was posted on July 14, 2026, with a firm response deadline of September 1, 2026, allowing interested parties approximately six weeks to prepare and submit proposals. The contracting entity is identified as the Procurement organization under the state of California, though no specific city, address, or point of contact details are provided, and the place of performance remains unspecified, suggesting the work may be required across multiple sites within the state. All equipment and systems must meet rigorous standards for accuracy, reliability, and integration within existing infrastructure to ensure effective wetwell level monitoring and operational safety.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

9 days ago

DEADLINE

in about 1 month
View Details
NAICS: 238210
SLED
Electrical Systems InstallationThe contract entails the installation of comprehensive electrical systems, including conduits, wiring, grounding, and control instrumentation, all aligned with the National Electrical Code and NIST standards to ensure safety, reliability, and regulatory compliance. The work is classified as a subcontract under NAICS code 238210, indicating it pertains to electrical contracting services, and is set to be performed under the oversight of the California-based Procurement agency. The solicitation was posted on July 14, 2026, with a firm deadline for responses set for September 1, 2026, at 6:00 PM, leaving potential contractors approximately seven weeks to prepare and submit proposals. The place of performance and point of contact details are not specified, and there is no set-aside designation, meaning all eligible contractors may compete without restriction. Interested parties must access the full solicitation through the provided online portal for additional requirements or technical specifications.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

9 days ago

DEADLINE

in about 1 month
View Details
NAICS: 238990
SLED
Mobilization and Site SetupThe contract titled Mobilization and Site Setup involves comprehensive site mobilization activities including the establishment of temporary facilities, implementation of traffic control measures, placement of safety signage, and proper staging of equipment, all while ensuring full compliance with established safety programs. This subcontract is part of a larger procurement effort under the North American Industry Classification System code 238990 and is managed by the California agency operating under the Procurement organization, with a deadline for responses set for September 1, 2026. All work must be performed in accordance with regulatory and safety standards, and the scope is focused on preparatory site activities necessary to support subsequent construction or operational phases. The contract does not specify a set aside type, location details, or point of contact, but the online portal provided serves as the primary reference for further information and submission requirements.
All Other Specialty Trade Contractors

POSTED

9 days ago

DEADLINE

in about 1 month
View Details
NAICS: 237990
SLED
FE23-03 (Construction), WETWELL LEVEL MONITORING UPGRADE AT COLLECTIONS PUMP STATIONSThe contract pertains to the wetwell level monitoring upgrade at multiple collections pump stations in Orange County, California, with a total estimated value of $450,000 under a firm fixed price structure. The scope includes furnishing, installing, and testing electrical grounding and bonding systems across key locations such as Bay Bridge, Crystal Cove, Edinger, and MacArthur Pump Stations, along with additional sites including Slater, Lido, A St., and 15th St. Work must comply with NFPA 70, UL 467, IEEE 80, IEEE 142, IEEE 837, Cal/OSHA, and OSHA standards, ensuring safety, reliability, and operational integrity. Deliverables require full system integration with instrumentation grounding, conductor routing, and verification testing to industry benchmarks including NETA certification for test personnel and NIST-traceable calibration. The contractor must hold a valid California "A" or "C-10" license and self-perform at least 30% of the work, with subcontracting limited to 70%. All subcontractors must also maintain appropriate state licensure and DIR registration under California labor law. The project has a baseline duration of 250 calendar days, with liquidated damages of $350 per day for delays beyond final completion, and payment terms are net 30 days upon submission of properly formatted applications through OC SAN’s internal PCMS system. No federal invoicing systems like WAWF are used; financial records must be maintained for audit under internal clauses GC-51 and GC-57, though no specific Treasury Account Symbols or federal appropriation codes are provided. Bids must be submitted electronically via the OC SAN Vendor Portal on OpenGov by September 1, 2026, with hard copies of bid security delivered to the Fountain Valley office. Packaging and labeling requirements mandate stainless steel or UV-stable plastic tags with laser engraving, Helvetica font, and specific dimensions for equipment, while hazardous materials must be labeled per OSHA 29 CFR 1910.1200. All equipment must include comprehensive conductor and conduit markings, and no barcoding is required. Insurance must be maintained throughout performance and warranty, and the contractor must execute signed bonds, certificates, and contracts within 15 days of award or face forfeiture. The contracting office is located in Fountain Valley, with primary point of contact Stephanie Reveles, and no designated COR, COTR, or PCO
Other Heavy and Civil Engineering Construction

POSTED

9 days ago

DEADLINE

in about 1 month
View Details
NAICS: 323111
SLED
Controlled Substance Prescription Form PrintingThe contract requires the secure printing of controlled substance prescription forms that fully comply with California state regulations, incorporating advanced tamper-evident security features to prevent counterfeiting, alteration, or unauthorized duplication. All printed materials must meet strict physical and procedural standards to ensure integrity, including specialized paper, ink, and embedded security elements that clearly indicate any tampering attempt. The printer must maintain rigorous controls over all printed forms from production through delivery, ensuring no forms are lost, misplaced, or distributed improperly. All handling of protected health information (PHI) associated with the prescription forms must adhere to stringent privacy and security protocols, in full alignment with HIPAA and California-specific data protection laws. The printer is responsible for implementing, maintaining, and auditing secure facilities, encrypted data workflows, and trained personnel to safeguard PHI throughout the entire production cycle. The contract is structured as a subcontract with a response deadline of August 13, 2026, under NAICS code 323111 for commercial printing, and performance must occur within California under the oversight of the state procurement office.
Commercial Printing (except Screen and Books)

POSTED

14 days ago

DEADLINE

in 20 days
View Details
NAICS: 541430
SLED
Graphic Design and Typesetting ServicesThe contract titled Graphic Design and Typesetting Services involves the creation of print-ready designs, layout, and typesetting for all printed materials, with strict adherence to branding guidelines and accessibility standards. The work requires precision in visual communication and technical compliance to ensure all outputs meet professional and regulatory requirements for public distribution. The scope encompasses end-to-end production support for print media, including but not limited to brochures, reports, posters, and other official documents. This is a subcontract under NAICS code 541430, posted on July 9, 2026, with a response deadline of August 13, 2026. The contract is managed by the Procurement agency in California, though specific office location and point of contact details are not provided. All work must be performed in accordance with the specified requirements without deviation, and bidders are expected to demonstrate expertise in print production, accessibility compliance, and brand consistency. The opportunity is accessible via the provided online portal for submission and further details.
Graphic Design Services

POSTED

14 days ago

DEADLINE

in 20 days
View Details
NAICS: 323112
SLED
Specialty Print and Packaging ItemsThe contract encompasses the production of specialty printed and packaged items including custom stickers, labels, certificates, invitations, and presentation folders, all requiring advanced finishing techniques such as die-cutting, foil stamping, and spot UV coatings. These items must meet precise quality standards for detail, durability, and visual appeal to suit professional and institutional use. The work is governed under NAICS code 323112, indicating it falls within the commercial printing sector, and is structured as a subcontract opportunity with no set-aside provisions. The solicitation was posted on July 9, 2026, and responses are due by August 13, 2026, with no specified delivery location or point of contact provided. The contracting entity is listed as Procurement under the California agency, though no physical address or point of contact details are included, and the only access point for further information is through a public portal link.
Commercial Flexographic Printing

POSTED

14 days ago

DEADLINE

in 20 days
View Details
NAICS: 323120
SLED
Wide-Format and Signage PrintingThe contract pertains to wide-format printing services for posters and vinyl banners, requiring inclusion of grommets, lamination, and mounting on durable substrates to ensure longevity and structural integrity for outdoor or high-traffic use. Services must meet quality standards for color accuracy, material durability, and precise finishing to support visual communication needs across various public and institutional environments. The work is classified under NAICS code 323120, indicating it falls within the commercial printing sector, and is structured as a subcontract opportunity with no set-aside designation. The solicitation was posted on July 9, 2026, with a response deadline of August 13, 2026, providing potential vendors approximately five weeks to prepare and submit their proposals. The contracting entity is listed as Procurement under the California agency, though specific office or point of contact details are not provided. The place of performance and organizational address information are unspecified, suggesting the work may be performed remotely or upon mutual agreement, but deliverables must be capable of deployment statewide. All proposals must be submitted via the designated online portal before the deadline to be considered eligible.
Support Activities for Printing

POSTED

14 days ago

DEADLINE

in 20 days
View Details
NAICS: 323120
SLED
Digital and On-Demand PrintingThis contract entails the short-run digital printing of business cards, postcards, notepads, and door hangers with variable data capabilities and a requirement for rapid turnaround times. The work is classified under NAICS code 323120, which corresponds to commercial printing, and is structured as a subcontract opportunity with no specific set-aside designation. The solicitation was posted on July 9, 2026, with responses due by August 13, 2026. The contracting agency is listed as Procurement under the California state organization, though no specific office address or point of contact details are provided. Performance location information is also unspecified. Interested parties can access additional information through the provided online portal link.
Support Activities for Printing

POSTED

14 days ago

DEADLINE

in 20 days
View Details
NAICS: 323111
SLED
Commercial Offset Printing – Brochures, Flyers, and BookletsThe contract calls for high-volume commercial offset printing services to produce full-color, double-sided brochures, flyers, and perfect-bound booklets across a range of paper stocks to meet diverse printing needs. The work is classified under NAICS code 323111, indicating it is for commercial printing services, and is structured as a subcontract with no set-aside provisions. The solicitation was posted on July 9, 2026, and responses must be submitted by August 13, 2026. The contracting organization is listed as Procurement under the California agency, though specific office location and point of contact details are not provided. The place of performance and other geographic specifics are also undefined in the documentation. interested parties should refer to the public portal link for additional submission instructions and requirements.
Commercial Printing (except Screen and Books)

POSTED

14 days ago

DEADLINE

in 20 days
View Details