Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

THERMAL ELECTRICAL,

Active
SPE7M2-26-T-5785Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of thermal electrical components with NSN/Part Number 1710-01-531-5451, for a quantity of five units, under Purchase Request 7017602882. The items are subject to strict export control regulations under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons—regardless of location—requires prior authorization from the Department of State or Commerce. This restriction extends to foreign national employees and foreign subsidiaries of U.S. companies, and compliance with DFARS 252.225-7048 is mandatory. Access is limited to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling Department of Defense export-controlled technical data, and have passed the DLA Export-Controlled Technical Data Questionnaire. The contract was issued as a Women-Owned Small Business Set-Aside solicitation under NAICS code 488190 by the Department of Defense’s Nuclear Reactor Program, with a response deadline of August 10, 2026, and a required delivery timeframe of 253 days after contract award. Performance is to occur in San Diego, California, with Alisha Blanton serving as the primary point of contact.

General Info

Procurement of five ITAR/EAR-controlled thermal electrical components for DLA, restricted to certified U.S./Canada contractors, delivery in 253 days, San Diego.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

488190 - Other Support Activities for Air TransportationView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, US

Set-Aside

WOSB

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
Alisha Blanton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
THERMAL ELECTRICAL,
THERMAL ELECTRICAL<(>,<)>
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1710-01-531-5451 Quantity: 5 EA Purchase Request: 7017602882QTY: 5 Delivery: 253 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 488190
New
DIBBS
EXTRUSION 40-168-1 707
Solicitation # SPEFA5-26-T-0963
The contract specifies the procurement of an extrusion part numbered 40-168-1, manufactured from 7075-T6 aluminum alloy conforming to the AMS QQ-A-200/11 Revision A standard, with a total length of 144 inches. The material must be packaged to prevent damage during shipment in compliance with ASTM D3951 and MIL-STD-129 labeling requirements, with packaging adhering to DLA’s RP001 packaging standards, which take precedence over ASTM. A Certificate of Quality Conformance is mandatory, and the material is subject to zero-defect acceptance sampling under MIL-STD-1916 or ASQ H1331 Table 1, with unspecified attributes treated as major and requiring zero non-conformances in the sample lot. Physical identification and marking must follow RQ017 requirements, and metal certification data must be provided via CDRL-METALSCERT, referenced in the Technical Data Package. The NSN is 9540-LL-NCP-A648, with a quantity of 288 inches ordered under purchase request 7017674640, delivered FOB destination within 55 days, with a permitted quantity variance of plus or minus 10 percent. Inspection and acceptance occur at the delivery point, and the material has no shelf life limitation. The contract is issued under SPEFA5-26-T-0963 with a required delivery date of October 24, 2026, and the shipment must be sent to the specified FOB destination at Cherry Point, North Carolina, using the provided freight and parcel post addresses.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
RAMP ANGLE
Solicitation # SPEFA5-26-T-0964
This contract pertains to the procurement of one unit of a ramp angle component identified by NSN 1560-LL-NC1-0614 and part number 65207-10042-151 for Sikorsky Aircraft Corporation, designated as a critical application item. The item must be delivered within 62 days to the destination FOB Cherry Point, North Carolina, with no tolerance for quantity variance. Inspection and acceptance occur at the delivery point, and all packaging must adhere to ASTM D3951 while complying with the more stringent DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for labeling and marking. Packaging and palletization must meet DLA’s specific procurement standards outlined in RP001, and no shelf life requirement applies. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stated, and quality attributes are to be verified at specified levels. The unit of issue is each, with a total contract price of $1.00. The contract is issued under solicitation SPEFA5-26-T-0964, with an original required delivery date of November 12, 2026, and responses are due by August 6, 2026. Delivery instructions include separate parcel post and freight shipping addresses at the Fleet Readiness Center in Cherry Point, NC, and the contract supersedes any conflicting standards with referenced DLA technical and quality mandates.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
ATTACHMENT
Solicitation # SPEFA5-26-T-0965
This contract, issued by the Defense Logistics Agency under solicitation number SPEFA5-26-T-0965, requires the delivery of three units of part number 1560-LL-NCB-5916, identified as a critical application item for Bell Textron Inc, to be delivered FOB destination within 62 days of contract award, with no quantity variance allowed. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific adherence mandated to MIL-STD-130N for identification marking, MIL-STD-1916 or ASQ H1331 for sampling procedures, and MIL-STD-129 for packaging and labeling, superseding ASTM D3951 where applicable. Packaging must comply with DLA’s RP001 standards, including palletization and unit packaging as specified, and all items must be marked and labeled accordingly with the correct unit of issue and quantity per unit pack. Inspection and acceptance occur at the destination, with zero non-conformances required in sampled lots unless otherwise directed, and verification levels are strictly aligned with specified critical, major, and minor attributes. The material has no shelf life requirement, and delivery must reach the designated freight address at Cherry Point, North Carolina, with parcel post instructions provided as a secondary point of contact. The contract is governed by the DLA’s procurement framework, and all referenced military standards, sampling plans, and packaging directives take precedence over general commercial guidelines. The point of contact is Tanya Whitney, and the contract is active with a response deadline in August 2026 and an original required delivery date of November 12, 2026.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
INSERT
Solicitation # SPEFA5-26-T-0962
The contract pertains to the procurement of 8 units of item NSN 5325-LL-NCC-3569 with part number R1388P115, supplied by approved vendors including Groov-Pin Corporation of Georgia, Inc. and General Electric Company. The delivery must be completed within 17 days of award, with FOB destination as the delivery point and inspection and acceptance occurring at the destination. The quantity is strictly fixed with zero variance permitted. All items must be packaged in accordance with ASTM D3951 and marked and labeled per MIL-STD-129, with palletization strictly following DLA’s RP001 Packaging Requirements, which take precedence over any other standard. The DLA Master List of Technical and Quality Requirements governs all technical and quality specifications, including sampling protocols, which require zero non-conformances under MIL-STD-1916 or ASQ H1331 unless otherwise specified, and attributes must be verified at designated levels or AQLs. The item has no shelf life requirement. The contract is issued under solicitation SPEFA5-26-T-0962 with a required delivery date of July 27, 2026. Deliveries must be shipped to the designated freight address in Cherry Point, NC, or sent via parcel post to the specified PSC address. The unit of issue is each, with a total price of $8.00 per unit. All requirements are tied to the version of the DLA Master List in effect at the time of solicitation issuance, and compliance with DoD unit of issue standards is mandatory.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-10HJ
This contract pertains to the procurement of PIN-RIVET components identified by NSN 5320-01-623-5442 and part number ST3M759C6-18, with a quantity of 41 units at a unit price of $41.00, totaling $1,681.00. The items must be delivered within 20 days FOB origin, with no tolerance for quantity variance, and are subject to inspection and acceptance at the manufacturer’s location. All components must comply with MIL-STD-130N for identification marking, and packaging must adhere strictly to ASTM D3951 and MIL-STD-129, while also meeting DLA’s packaging requirements, including palletization guidelines and unit pack specifications. The items are classified as a critical application item, and suppliers must be approved sources listed in the contract, including SPS Technologies, Huck International, Hi-Shear Corporation, and others, all using the same part number. The contract mandates zero non-conformances under sampling standards such as MIL-STD-1916 or ASQ H1331, with verification levels assigned per critical, major, and minor attributes. Technical compliance is governed by the DLA Master List of Technical and Quality Requirements, which supersedes all other standards. Suppliers requiring casting or forging capabilities must submit a Casting and Forging Assistance Request due to the likelihood of specialized tooling needs. Shipping must occur via traceable means, excluding parcel post, to the designated Fort Bragg, North Carolina delivery point. The contract includes a required delivery date of July 23, 2026, and is issued under solicitation SPE4A6-26-T-10HJ with a response deadline of August 6, 2026.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488190
New
DIBBS
International Freight and FOB Destination LogisticsThe contract requires the management of both international and domestic logistics under FOB Destination terms, placing full responsibility for all transportation costs and risks on the contractor until goods are delivered to designated military bases, specifically including Joint Base Charleston. This includes end-to-end coordination of freight movements with strict compliance to delivery conditions where title and risk transfer only upon arrival at the destination. All operations must align with DOD requirements, ensuring secure, timely, and accurate fulfillment to sensitive military locations. The contracting activity falls under the Department of Defense’s Medical Supply Chain MD Surg FSF, with a NAICS code of 488190 indicating specialized freight forwarding and related logistics services. The contract is structured as a subcontract with a response deadline of August 3, 2026, and will be managed through the DIBBS platform. While no set-aside status is specified, performance is strictly tied to the specified military installation, and the contractor must be prepared to handle complex logistical challenges associated with defense supply chain operations, including compliance with military protocols, security requirements, and potential international shipping constraints.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 488190
New
DIBBS
Domestic and International Logistics & Delivery to Yokosuka, JapanThe contract requires the transportation of finished medical kits from an assembly point to a designated Defense Logistics Agency destination in Yokosuka, Japan, encompassing full logistical execution including customs clearance and export documentation to ensure compliance with international shipping regulations. All deliveries must adhere to WAWF-compliant procedures for receipt and acceptance, ensuring accurate and timely tracking of goods through the military supply chain. The scope demands expertise in end-to-end international logistics with specific attention to the handling of medical supplies under strict regulatory oversight. The solicitation is issued as a subcontract under NAICS code 488190, which pertains to other support activities for air transportation, indicating the need for specialized freight forwarding and logistics services. The posting date is July 28, 2026, with responses due by August 3, 2026, and is managed by the Medical Supply Chain MD Surg FSF under the Department of Defense. The place of performance is Yokosuka, Japan, and bidders must demonstrate capability to navigate international regulatory frameworks while maintaining the integrity and security of medical inventory throughout transit. All work must be performed in alignment with U.S. government procurement standards and defense logistics protocols.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 488190
New
DIBBS
Transportation and Shipment LogisticsThe contract requires the arrangement and execution of domestic and international sea shipments for packaged goods, strictly adhering to military transport standards and WAWF compliance protocols. All logistics operations must meet rigorous defense department requirements to ensure secure, timely, and accurate movement of cargo, with performance centered at New Cumberland, Pennsylvania, 17070-5002. This is a subcontract under the Department of Defense’s ASC Commodities Division, designated under NAICS code 488190 for other transportation support activities. Bids must be submitted by August 5, 2026, with the solicitation posted on July 28, 2026, and all work is expected to align with the unique constraints and documentation protocols governing military logistics.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 488190
New
DIBBS
Defense Transportation & Sea Shipment DocumentationThe contract requires the preparation and management of comprehensive documentation for the sea transportation of medical supplies to APO destinations, ensuring full compliance with foreign-flag vessel reporting and reflagging regulations. This involves meticulous coordination to meet federal requirements for international maritime logistics, particularly when using non-U.S. flagged vessels, and maintaining accurate records to satisfy regulatory and operational standards for Defense Department shipments. The work is critical to sustaining the supply chain for military medical operations in overseas locations served by APO 09227. The task is structured as a subcontract under the Department of Defense, specifically managed by the Medical Supply Chain MD Surg FSF, with a NAICS code of 488190 for other support activities for water transportation. The solicitation opened on July 28, 2026, with a submission deadline of August 3, 2026, and performance is exclusively focused on the APO zip code 09227-0000. All documentation must align with stringent federal maritime laws and support the seamless movement of life-saving medical materials, requiring expertise in international shipping compliance, documentation accuracy, and defense logistics protocols.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 488190
New
DIBBS
CUSHIONING MATERIAL
Solicitation # SPE8ED-26-T-1191
The contract specifies the procurement of cushioning material with part number 30458 and NSN 8135016126027, supplied by Knight's Armament Company, with a total quantity of 36 units delivered in single ea units at a unit price of $36.00, resulting in a total price of $1,296. Delivery is required FOB origin within 160 days from the contract award, with no variance allowed in quantity, and inspection and acceptance both occurring at the destination point. The material must be packaged in accordance with ASTM D3951, but all technical and quality requirements from the DLA Master List of Technical and Quality Requirements supersede this standard. Packaging must be marked and labeled as per MIL-STD-129, and palletization must comply with DLA Packaging Requirements for Procurement RP001. The delivered goods must be shipped to the DLA Distribution facility at New Cumberland, Pennsylvania, with the required ship date set for January 18, 2027, and the original delivery deadline at March 5, 2027. Transportation logistics are governed by DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE8ED-26-T-1191 with a response deadline of August 10, 2026, and is subject to Covered Defense Information protocols. The unit of issue aligns with DoD standards and is confirmed via the official DLA Unit of Issue spreadsheet.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 488190
New
DIBBS
INDICATOR, LIGHT
Solicitation # SPE4A6-26-T-09ZS
The contract is for the procurement of three indicator, light units with NSN 6210-01-623-5179 and part number 1852-1-10-20320 from Sorensen Lighted Controls Inc, under solicitation SPE4A6-26-T-09ZS. The total quantity ordered is three units, each priced at $3.00, with delivery required within 20 days of contract award, FOB origin, and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951, but all technical and quality requirements from the DLA Master List of Technical and Quality Requirements take precedence, and all packaging and labeling must follow MIL-STD-129. Palletization is required per DLA’s RP001 packaging standards, and the Unit of Issue and Quantity per Unit Pack must strictly adhere to contract specifications. Shipment must be made via vessel using the fastest traceable means, prohibiting parcel post, and must use the designated freight shipping address in Norfolk, Virginia. The RDD code is 777, the tracking number is V466076196GF45, and the project identifier is 478 TP 2. The origin address for delivery is also in Norfolk, referenced as V46607. The original required delivery date is July 22, 2026, and the solicitation was posted on July 28, 2026, with responses due by August 5, 2026. The contract falls under NAICS code 488190 and is managed by the Department of Defense’s ASC Commodities Division, with Lakisha Atkinson as the primary point of contact. The item is subject to Covered Defense Information protocols and requires removal of government identification from non-accepted supplies. Government-use-only fields contain classification codes for inventory, distribution, and freight control.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 488190
New
DIBBS
SKIN
Solicitation # SPEFA5-26-T-0960
The contract issued by the Defense Logistics Agency Fleet Readiness Center for the item identified as SKIN with NSN 1560-LN-002-9428 and part number 65213-13011-142 specifies the procurement of two units at a total contract value of $2.00, with delivery required 53 days after award to Cherry Point, North Carolina under FOB Destination terms. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and must be packaged and labeled per MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization conforming strictly to those guidelines. Item identification must follow MIL-STD-130N(1), and quality assurance sampling methods are governed by MIL-STD-1916 or a comparable zero-based plan, requiring zero non-conformances unless otherwise specified. Inspection and acceptance occur at the delivery point, with the government retaining responsibility for both functions. The material has no shelf life, and preservation methods are not further defined. The contract is solicited under SPEFA5-26-T-0960 with a response deadline of August 5, 2026, and requires electronic submission through DIBBS. The contract incorporates a comprehensive set of regulatory and compliance clauses, including mandatory cybersecurity protections under 52.240-93 and 252.204-7012, requirements for safeguarding covered defense information and reporting cyber incidents, and compliance with hazardous materials labeling standards under 252.223-7001 and 52.223-3, necessitating submission of Safety Data Sheets and hazard labels unless exempted. Offerors must certify their entity status via UEI and CAGE code, comply with employment eligibility verification through E-Verify, and affirm adherence to anti-human trafficking provisions. Ocean transport, if applicable, must use U.S.-flag vessels unless waived. Contractual changes are permitted under fixed-price terms, and subcontractors providing commercial products must flow down applicable clauses. Payments are to be processed exclusively through WAWF using approved document types. The solicitation does not specify a contract type or evaluation factors beyond implied price-driven, lowest price technically acceptable award criteria. Failure to meet any referenced technical, quality, packaging, or regulatory requirement constitutes grounds for rejection
DLA FLEET READINESS CENTER DLA PSC

POSTED

2 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 332919
New
DIBBS
FLANGE, PIPE
Solicitation # SPE7M2-26-Q-0690
The contract specifies the procurement of seven flanges for pipe made from 70/30 copper-nickel material with a nominal pipe size of 12 inches, socket-weld design, rated for 150 psi. Compliance is mandated with MIL-PRF-20042G and MSS SP-9-2024 standards for dimensional and mechanical requirements, including spot facing and back facing per drawing 8104715319 Revision E. All technical and quality specifications from the DLA Master List of Technical and Quality Requirements take precedence and are incorporated by reference, with revisions controlled by the solicitation or award date depending on acquisition size. Ozone depleting chemicals are strictly prohibited, and any substitutes require prior approval. The product must be packed and labeled per ASTM D3951 and MIL-STD-129, with palletization adhering to DLA packaging requirements, and all packaging must be marked in accordance with the specified Unit of Issue and Quantity per Unit Pack. The contract requires full and open competition under a firm fixed price with zero variance allowed in quantity. Inspection and acceptance occur at destination, with delivery due 98 days after award. The item is tracked by NSN 4730-01-463-5672 with a purchase request number 7016708439 and a scheduled delivery date of January 21, 2027. Shipping and delivery are directed to the DLA Distribution facility in New Cumberland, Pennsylvania, following DLA transport procedures.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334514
New
DIBBS
PROBE, TEST
Solicitation # SPE7M2-26-T-5787
The contract pertains to the procurement of two units of a probe and test item identified by NSN 6625-01-669-1718 and part number FB-SD101 from Viasol Solutions LLC, with a total contract value of $2.00 per unit. Delivery is required within 161 days under FOB origin terms, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and unit containment, and marking must follow MIL-STD-129 with no special marking required. All packaging and palletization adhere to DLA’s standardized requirements, and the item may contain batteries, triggering applicable handling protocols. The delivery location is DLA Distribution San Joaquin in Tracy, California, with the same address used for both shipping and parcel post. The original required delivery date is March 5, 2027, though the need ship date is January 19, 2027. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. The contract is issued under solicitation SPE7M2-26-T-5787, posted July 29, 2026, with responses due by August 10, 2026, and falls under NAICS code 334514 for the Department of Defense’s Nuclear Reactor Program.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE7M2-26-T-5788
This contract specifies the procurement of electrical insulation tape, each roll measuring 100 feet, with the unit of issue designated as RO=100FT. A total of 112 rolls are required under purchase request 7017520040, to be delivered within 154 days FOB origin with no tolerance for quantity variance. The material must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and packaging, marking, and shipping must adhere to MIL-STD-2073-1E and MIL-STD-129, including palletization as outlined in DLA Packaging Requirements. The tape is classified as a critical application item with no shelf life requirement, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the product, except for specified functional uses such as in batteries, fluorescent lamps, or instruments, which must then include a secondary containment boundary as mandated by NAVSEA 5100-003D. The item is supplied under NSN 5970-01-018-4304 with approved part numbers from 3M Company and Astilleros Neumáticos Duarry SA, and all documentation and compliance requirements must be met for source approval and shipment. Delivery is to be made to Bremerton, Washington, with inspection and acceptance taking place at the destination.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
TRACK PLATE, INSTALLATI
Solicitation # SPE7M2-26-T-5784
The contract pertains to the procurement of a track plate, installation item with NSN 5999-01-289-0868 and part numbers assigned to multiple suppliers including INDAL TECHNOLOGIES INC, FEDERAL EQUIPMENT CO, SIGMATION INC, and NAVPAR INC. The item is classified as a critical application and must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with drawings and specifications governing design, marking, and performance. All bare items must be marked with the contract number, NAWC CAGE code, and part number per applicable drawings, and packaging must comply with MIL-STD-2073-1E and marking requirements of MIL-STD-129, including the designated package code U and preservation methods. The item is subject to zero tolerance for quantity variance, delivery FOB origin, and inspection and acceptance at destination. Mercury and mercury compounds are strictly prohibited except for specific exempted uses such as functional batteries or sensors, and any permitted devices must include a secondary containment barrier per NAVSEA guidelines. The contract mandates adherence to MIL-STD-1916 or ASQ H1331 sampling plans with zero non-conformances unless otherwise specified, and requires a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Delivery is due in 217 days from contract award, with a required ship date of March 16, 2027, and final delivery to DLA Distribution Puget Sound in Bremerton, WA. The solicitation is a Women-Owned Small Business Set-Aside under NAICS 333998, with a unit price of $11.00 per unit for a total of 11 units.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
ROD
Solicitation # SPE7M2-26-T-5783
This contract pertains to the procurement of two units of item NSN 1710-00-564-1865 under solicitation SPE7M2-26-T-5783, with a delivery deadline 161 days after contract award. The item is classified as containing technical data subject to U.S. export control regulations, either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—is strictly prohibited without prior authorization from the Department of State or Commerce. Access to this technical data is restricted to DLA contractors who possess an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, and have received formal approval from DLA to handle such data. DFARS 252.225-7048 governs compliance. The contract is issued by the Department of Defense under the Nuclear Reactor Program, with performance occurring in New Cumberland, Pennsylvania, and all responses must be submitted by August 10, 2026. Primary point of contact is Alisha Blanton at DLA.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334413
New
DIBBS
MICROCIRCUIT, DIGITA
Solicitation # SPE7M2-26-Q-0691
The contract specifies the procurement of a digital microcircuit with NSN 5962-01-730-8483, requiring strict compliance with DLA technical and quality standards referenced through R and I numbers from the DLA Master List, including inspection at origin, qualified supplier and testing list requirements for FSC 5961 and 5962, and traceability documentation retention under DLA Procurement Note C03. The item must be sourced from qualified suppliers and meet stringent physical marking standards per IPC/JEDEC J-STD-609 for lead finish identification, with all packaging and labeling governed by MIL-STD-129 and DLA packaging directives. The microcircuit is designated as ESD and EMI sensitive, mandating compliant protective packaging per MIL-PRF-81705 using only qualified materials from QPL-81705, with ESD and EMI safeguards applied at approved workstations, and physical protection to prevent lead damage during handling and shipment. The contract mandates a first article test requirement unless waived, with government source inspection valid only if the test is invoked; otherwise, inspection at destination is acceptable. Packaging must follow MIL-STD-2073-1E with specific preservation methods and unit container codes, and palletization must adhere to RP001. The item is subject to a mercury prohibition, except in defined functional applications, and must be properly marked with special ESD designation ZZ. Delivery is required within 100 days after order award to Columbus, Ohio, for 25 units at a fixed quantity with zero variance, under a total small business set-aside. The supplier must verify full compliance with all referenced standards and maintain supply chain traceability, with technical data incomplete but still requiring the item to meet the cited specifications alongside the part number requirements.
Semiconductor and Related Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
DIBBS
HARDWARE KIT, MECHANIC
Solicitation # SPE7M2-26-T-5786
This contract pertains to the supply of a hardware kit and mechanic equipment identified by NSN 5340-01-738-2030 and part number 748669-K02, with a quantity of four units to be delivered within 154 days from the contract award. All items must comply with stringent technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E Appendix D for kits, marking per MIL-STD-129, and palletization under DLA’s packaging guidelines. The hardware must not contain intentionally added mercury or mercury compounds, except for specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or chemical reagents approved by NAVSEA, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Packaging and preservation methods must align strictly with the specified military standards, and all shipments must be addressed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is governed by the DLA’s procurement protocols and transportation directives, with required documentation including source approval requests, configuration change management, and variance requests where applicable. The solicitation was issued on July 29, 2026, with a response deadline in August 2026, and the original required delivery date is April 9, 2027.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M2-26-T-5782
The contract specifies the procurement of two units of a military-grade connector receptacle with NSN 5935-01-666-5493, manufactured to the MS27505E13F4S standard in accordance with MIL-DTL-38999N Revision N dated September 14, 2023, and referenced against MS27505G Revision G dated October 29, 2024. All components must originate exclusively from sources listed on the Qualified Products List or Qualified Manufacturer List, and commercial substitutes are strictly prohibited without prior written government authorization. Delivery is required within 20 days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur upon arrival at the delivery point. Packaging must comply with MIL-STD-2073-1E, marking must follow MIL-STD-129, and palletization must adhere to DLA’s RP001 requirements. The items are to be shipped via the fastest traceable means, excluding parcel post, to the USS GERALD R FORD CVN 78 at FPO AE 09523. The contract mandates use of the designated vendor shipping method and references specific DLA procedural notes for transportation logistics. The required delivery date is July 27, 2026, with the solicitation issued under contract number SPE7M2-26-T-5782 and managed by the Department of Defense’s Nuclear Reactor Program, with primary point of contact Alisha Blanton.
Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331492
New
DIBBS
Supplier of Raw Materials or Specialty ComponentsThe contract requires the supply of high-purity metals, insulating materials, or specialty components critical to the manufacturing of electromechanical systems qualified by the Department of Defense. All materials must meet strict quality standards with full traceability throughout the supply chain, ensuring compliance with defense-grade specifications and regulatory requirements. The products are intended for use in nuclear reactor systems under the NUCLEAR REACTOR PROGRAM, necessitating precise material integrity and adherence to military-grade performance criteria. Subcontractors must respond by August 3, 2026, with all submissions aligned to the NAICS code 331492, which categorizes other metal working machine shops. The solicitation does not specify set-aside status or geographic restrictions, and performance is not tied to a defined location, but all deliverables must support the DoD’s nuclear infrastructure needs without compromise. Traceability documentation, material certifications, and compliance verification are mandatory, and suppliers must be prepared to demonstrate adherence to defense supply chain security protocols.
Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & Data Protection (CMMC Level 2)The contract requires the implementation and maintenance of robust cybersecurity controls to safeguard covered defense information in accordance with DFARS 252.204-7012 and the Cybersecurity Maturity Model Certification Level 2 standards. This subcontract is categorized under NAICS code 541512, indicating it pertains to computer systems design services, and is being issued by the Department of Defense’s Nuclear Reactor Program. The work must ensure that all systems handling sensitive government data meet the rigorous security requirements defined by CMMC Level 2, which includes safeguarding controlled unclassified information through administrative, technical, and physical controls. Compliance with these standards is not optional and must be demonstrated through documented policies, continuous monitoring, and third-party validation. The solicitation was posted on July 28, 2026, with a response deadline of August 3, 2026, indicating a tight turn-around for proposers to submit detailed technical and compliance documentation. The performance location and point of contact are not specified, but the work is associated with a government agency engaged in nuclear reactor operations, suggesting the handling of highly sensitive and mission-critical information. Contractors must be prepared to undergo an official CMMC assessment and provide evidence of implemented security practices, access controls, incident response plans, and continuous monitoring capabilities. Failure to meet these requirements will result in non-compliance and potential termination of the subcontract.
Computer Systems Design Services

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance & Inspection Services (Third-Party)The contract requires third-party inspection and acceptance testing services for products under the Nuclear Reactor Program, adhering strictly to MIL-STD-1916 and ASQ Z1.4 sampling standards with defined AQL levels for critical, major, and minor defects. The work involves rigorous quality assurance processes to ensure compliance with military and industry specifications, with inspection outcomes directly tied to product acceptance or rejection based on predefined defect thresholds. The contractor must execute inspections with precision and document results according to the referenced standards, ensuring traceability and accountability across all tested batches. This subcontract is issued by the Department of Defense and is categorized under NAICS code 541330 for scientific and technical consulting services. Responses are due by August 3, 2026, with the solicitation posted on July 28, 2026. The place of performance and point of contact details are unspecified, but the work is expected to support defense-related nuclear reactor systems. Interested parties must review the full solicitation via the provided DIBBS link to understand submission requirements, deliverables, and any additional technical or regulatory expectations beyond the stated sampling standards.
Engineering Services

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 484220
New
DIBBS
Specialized Transportation & Delivery to Government DestinationThe contract requires the specialized transportation and delivery of finished goods to a first government destination under strict compliance with packaging, marking, and documentation standards, all to be completed within 150 days of contract award. The work is classified as a subcontract under NAICS code 484220, indicating a focus on specialized freight transportation, and is sourced by the Nuclear Reactor Program within the Department of Defense. The solicitation was posted on July 28, 2026, with a response deadline of August 3, 2026, allowing a limited window for prospective subcontractors to submit proposals. Although specific location details for the agency or performance site are not provided, the delivery must meet federal government requirements for secure and compliant logistics, likely involving sensitive or regulated materials. Bidders must ensure all operational processes align with government protocols to avoid rejection or delay.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

2 days ago

DEADLINE

in 4 days
View Details