THINNER, PAINT PRODUCTS

THINNER,PAINT PRODUCTS
THINNER<(>,<)> PAINT PRODUCTS
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
1 CN = 5 GL
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
SPE8ES-27-T-0042
SECTION B
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html
UNIT OF ISSUE = CAN (CN)<(>,<)> ONE CN CONTAINS 5.0 GALLONS (18.9 LITERS)
1. T-BUTYL ACETATE, 540-88-5, 73-77 %
2. METHYL AMYL KETONE, 110-43-0, 23-27 %
B. QUANTITATIVE REQUIREMENTS:
1. MAXIMUM WATER CONTENT (PERCENT BY WEIGHT): 0.02%
2. MAXIMUM ALCOHOL CONTENT (PERCENT BY WEIGHT): 0.04%
3. MAXIMUM NONVOLATILE CONTENT (GRAMS/100ML): 0.02
4. MINIMUM FLASH POINT: 40 DEG F (4 DEG C)
5. DENSITY (LBS/GALLON): 6.9-7.2
6. APPEARANCE: THE APPEARANCE OF THE SOLVENT SHALL BE CLEAR AND FREE FROM SUSPENDED MATTER WHEN EXAMINED BY TRANSMITTED LIGHT.
7. ODOR: THE ODOR SHALL BE CHARACTERIZED OF THE INGREDIENTS AND NOT NOTICEABLE AFTER DRYING ON THE FILTER PAPER.
8. SPOT TEST: THE SOLVENT SHALL LEAVE NO OILY SPOT OR STAIN ON FILTER PAPER.
9. COMPOSITION: THE COMPOSITION SHALL CONFORM TO THE AMOUNTS GIVEN ABOVE. APHA COLOR - MAXIMUM 10
10. ACIDITY: MAXIMUM 0.01 PERCENT BY WEIGHT
11. RECLAIM MATERIAL: THE USE OF RECLAIMED SOLVENT IS PROHIBITED.
12. COMPATIBILITY: MUST BE COMPATIBLE WHEN MIXED 4:1 BY VOLUME WITH MIL-DTL-53022 AND MIL-DTL-53039.
13. CERTIFICATE OF CONFORMANCE: SUBMITTED WITH EACH SHIPMENT.
USE: A HAP-FREE SOLVENT BLEND TO BE USED AS A REDUCING THINNER WITH CARC AND FOR LINE AND PAINT GUN CLEANING AND FLUSHING. THIS PRODUCT IS AN ALTERNATIVE TO MIL-T-81772<(>,<)> WHICH IS USED AS THE THINNER FOR THE CARC PRIMERS, EPOXY INTERIOR TOPCOATS AND CARC TOPCOATS.
THIS NSN HAS A SHELF-LIFE OF 36 MONTHS (3 YEARS) AND IS A TYPE II SHELF-LIFE ITEM. PRODUCTS DELIVERED UNDER THIS CONTRACT SHALL BE MANUFACTURED TO ENSURE THAT A MINIMUM OF 85% SHELF LIFE IS REMAINING AT TIME OF RECEIPT BY THE FIRST GOVERNMENT ACTIVITY. SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH THE LATEST REVISION OF MIL-STD-129, AND SHALL CLEARLY INDICATE THE MANUFACTURED DATE AND THE INSPECTION/TEST DATE.
SHALL BE PACKAGED IN ACCORDANCE WITH THE SUPPLIER'S NORMAL COMMERCIAL PRACTICE, PROVIDED THAT THERE WILL BE NO INTERACTION CHEMICALLY OR PHYSICALLY WITH THE CONTENTS SO AS TO DAMAGE THE CONTAINERS OR ALTER THE STRENGTH, QUALITY, OR PURITY OF THE CONTENTS. THE CONTAINERS SHALL BE CLOSED IN A MANNER THAT WILL INSURE THAT THE CONTENTS WILL NOT SPILL OR LEAK FROM THE CONTAINERS DURING SHIPMENT, HANDLING, STORAGE AND REDISTRIBUTION.
RS060: Shelf life requirement RS001 for a TYPE 2 (CODE 7) item with a shelf life of 36 month (extendable) applies to this item.
TDP Rev A Gen 1 IAW BASIC DRAWING NR 14153 RE-016088271 REVISION NR DTD 10/10/2014 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-DTL-81772C NOT 1 REVISION NR C DTD 08/14/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023
SPE8ES-27-T-0042
SECTION B
PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-147F NOT 1 REVISION NR F DTD 09/05/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK FED-STD-313F REVISION NR F DTD 10/12/2018 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-DTL-53022F(1) REVISION NR F DTD 04/15/2021 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018609831 0001 CN 1.000
NSN/MATERIAL:8010016088271
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
BULK BREAK POINT:
W58RPS
W8U2 FL ARNG CSMS 1
SPE8ES-27-T-0042
SECTION B
PR: 7018609831 PRLI: 0001 CONT’D
5629 STATE ROAD 16 W
CAMP BLANDING BLDG 4100
STARKE FL 32091-9795
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W801YM
W8U2 FL ARNG CSMS 1
5629 STATE ROAD 16 W
CAMP BLANDING BLDG 4100
STARKE FL 32091-9795
US
MARKFOR
W801YM
W8U2 FL ARNG CSMS 1
5629 STATE ROAD 16 W
CAMP BLANDING BLDG 4100
STARKE FL 32091-9795
US
M/F: (TCN) W801YM62730205
RDD: N
PROJ: TP 1
SUPP ADD: W32RRX SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A3A DIST: ADV: FC: 62
Need Ship Date:00/00/0000 Original Required Delivery Date:10/06/2026
SPE8ES-27-T-0042 NSN/Part Number: 8010-01-608-8271 Quantity: 1 CN Purchase Request: 7018609831QTY: 1 Delivery: 5 days ADO