Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Third-Party Testing Agency

Active

State & Local

Response Deadline11/09/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Millington Community Schools is seeking a qualified third-party testing agency for a subcontract to provide independent testing and certification services for facility projects. The selected agency will be responsible for performing material testing, interpreting results to ensure compliance, and verifying system performance through the use of electrical diagnostic tools and load bank testing equipment. The contractor is required to deliver certified material test reports and a comprehensive system commissioning report. This opportunity was posted on October 15, 2026, with a response deadline of November 9, 2026. The project falls under NAICS code 541380 and supports prime contractors in maintaining quality and safety standards for school facility improvements.

General Info

Millington Community Schools seeks a third-party agency for facility testing and certification services.

Agency

Michigan → Millington Community Schools

NAICS

541380 - Testing Laboratories and Services

Place of Performance

MI, USA

Set-Aside

NONE

Documents

This scope was carved out of RFP-MILL-270000000104-1.

The full solicitation package (7 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RFP-MILL-270000000104-1 | Backup Generators for Kitchens

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 07:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMichigan → Millington Community Schools

ContactsNo contacts available

OfficeN/A

Organization / AgencyMichigan → Millington Community Schools

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent testing and certification for prime contractors on Millington Community Schools facility projects. Provides material test reports, interprets results for compliance, and verifies system performance under load using load bank testing equipment and electrical diagnostic tools. Must be a qualified testing agency. Delivers certified material test reports and a system commissioning report.

Similar Contracts

Same NAICS industry code

Third-Party Construction Materials Testing & Inspection

University of Massachusetts System

POSTED

about 8 hours ago

DEADLINE

Campus Consulting – Construction Materials Testing And Special Inspection Services

Solicitation # 20261026019

California State University, Chico

POSTED

about 12 hours ago

DEADLINE

MIL-STD Environmental Testing ServicesThe MIL-STD Environmental Testing Services subcontract, issued by the Department of Defense under agency W6QK Acc-Apg, involves performing critical environmental qualification testing for prime contractors. The scope of work focuses on aircraft interior decontamination projects for the Joint Project Manager for CBRN Special Operations Forces. The selected provider will conduct chamber evaluations and environmental stress testing, utilizing temperature, humidity, and vibration chambers to verify equipment survival in austere environments. All testing activities must strictly adhere to MIL-STD-810H standards, with the final deliverable being comprehensive environmental qualification test reports. This opportunity falls under NAICS code 541380 and is designated for performance in Abell. The response deadline for this requirement is November 24, 2026.

POSTED

about 15 hours ago

DEADLINE

Specialized Aerospace Quality Inspection/Certification

Ok DLA Aviation At Oklahoma City

POSTED

about 15 hours ago

DEADLINE

in about 17 hours

AMS Designated Laboratory Meat Testing Services (ADL)

Solicitation # 12-1NTS-26-R-0002

The USDA Agricultural Marketing Service (AMS) is soliciting proposals under solicitation 12-1NTS-26-R-0002 to establish AMS Designated Laboratories (ADLs) for microbiological and fat testing of meat, poultry, egg, and aquatic products. This effort supports the National School Lunch Program and other federal nutrition assistance programs to ensure compliance with Federal Purchase Program Specifications. The government intends to award a Firm-Fixed-Price, Indefinite Delivery/Indefinite Quantity (IDIQ) contract with a base period from April 1, 2027, through March 31, 2028, and four subsequent option periods, extending the total performance period to March 31, 2032. The contract has a guaranteed minimum of 10,000 dollars and a maximum ceiling of 15,000,000 dollars. This procurement is specifically set aside for Women-Owned Small Businesses (WOSB). Selected laboratories must maintain ISO/IEC 17025:2017 accreditation and utilize approved methods from FSIS MLG, AOAC, or AOCS. Key responsibilities include conducting analyses for Aerobic Plate Count, Total coliforms, Generic E. coli, and Salmonella, as well as providing sampling procedures and shipping supplies to vendors. Contractors are required to provide timely reporting of results, daily status reports, and statistical process control data. Proposals will be evaluated based on Best Value, considering technical capabilities, past performance with at least two references from the last five years, and price. All submissions must be uploaded in PDF format via WBSCM by the deadline of November 20, 2026.

POSTED

about 15 hours ago

DEADLINE

Granite Surface Plate Calibration and lapping - with Q&As

Solicitation # W519TC27QA007

Solicitation W519TC27QA007, issued by the Army Contracting Command - Rock Island, seeks an ISO 17025 accredited vendor to provide annual inspection, calibration, and lapping repair for granite surface plates at the Rock Island Arsenal Joint Manufacturing and Technology Center. The requirement is structured as a firm-fixed-price contract consisting of a base year from February 2, 2027, to February 1, 2028, with four subsequent option years, for a total potential duration of five years and six months. All work must be performed in accordance with ASME B89.3.7 and ANSI Z-540-1 standards, with calibrations traceable to NIST. The contract utilizes a hybrid pricing model where the annual inspection and calibration of all plates are firm-fixed-price lots, while lapping repairs are priced separately via an hourly labor rate and must be authorized by the Contracting Officer or COR. Estimated travel costs should be included in the firm-fixed pricing, though actual costs will be billed after service per Joint Travel Regulation rates. Deliverables include calibration stickers for each plate and a Service Acceptance Report submitted within three business days of completion. Offerors must submit their proposals by November 9, 2026, including a signed concurrence of the Scope of Work and documentation of their technical capabilities.

POSTED

about 15 hours ago

DEADLINE

B--METAGENOMICS & TRANSCRIPTOMIC SERVICES

Solicitation # 140G0226Q0145

Solicitation 140G0226Q0145 is a firm-fixed-price Blanket Purchase Agreement (BPA) issued by the USGS OAG Denver Acquisition Branch to provide next-generation sequencing (NGS) services for the Upper Midwest Water Science Center’s Michigan Bacteriological Research Laboratory. The scope of work includes shotgun metagenomics, whole genome sequencing (WGS), and RNA-sequencing (RNA-seq) to support research on bacterial pathogens, antibiotic resistance, and microbial ecology. The contract utilizes technologies such as Illumina, AVITI, Oxford Nanopore, and PacBio. The BPA has a total not-to-exceed value of $300,000.00 and a five-year period of performance from September 28, 2026, to September 27, 2031, with specific performance periods defined by individual call orders. This opportunity is set aside for Women-Owned Small Businesses (WOSB) and Economically Disadvantaged Women-Owned Small Businesses (EDWOSB). Award decisions are based on the most advantageous offer, where non-priced technical factors—specifically past performance, key personnel qualifications, and the capability to provide the required sequencing deliverables—are significantly more important than cost. Deliverables must meet strict quality standards, including a 75% quality score over 30 per sequencing run, and be delivered via secure FTP or external hard drive with comprehensive technical metadata. Payments are processed electronically through the Treasury’s Invoice Processing Platform (IPP), and the place of performance is located in Lansing, Michigan.

Ofc Of Acquisition Grants-Denver

POSTED

about 15 hours ago

DEADLINE

W684Q-264141 - Laboratory Testing - RFSO

Solicitation # WS5609648156

The Government of Canada, through the Department of Public Works and Government Services, has issued solicitation WS5609648156 for laboratory testing services. This federal opportunity, identified as W684Q-264141, falls under NAICS code 541380 and specifies that the place of performance will be located in British Columbia, Canada. The solicitation was posted on October 27, 2026, with a response deadline set for November 4, 2026, at 7:00 PM. Interested parties may coordinate with the primary contracting authority, Nicki Arrieta, to facilitate their submissions.

Department of Public Works and Government Services

POSTED

about 22 hours ago

DEADLINE

Ultrasonic Rail Testing and Material CertificationThis subcontract for Ultrasonic Rail Testing and Material Certification involves providing independent third-party testing and certification services for prime contractors working on Maryland Transit Administration projects. The selected vendor must be an MTA-approved certified independent testing laboratory capable of performing 100 percent in-line ultrasonic testing across the full length of rails. This technical process requires the use of a computerized DAPCO 300 testing unit or an approved equivalent to ensure material integrity. The contractor is responsible for delivering formal certified test reports and certificates of compliance to verify that all rail materials meet the necessary standards. Interested parties must submit their responses by November 16, 2026, under NAICS code 541380.

Maryland Transit Administration

POSTED

DEADLINE

Concrete Field TestingThis subcontract opportunity involves providing quality assurance testing for prime contractors working on California Department of Transportation highway projects. The primary scope of work focuses on conducting field testing of concrete pours to verify strength and ensure strict adherence to mix compliance standards. The selected provider is responsible for delivering certified test reports to document these findings. To qualify for this engagement, the contractor must employ a certified ACI Grade 1 concrete field-testing technician. Interested parties must submit their responses by December 3, 2026, in accordance with the solicitation posted on October 26, 2026. The project falls under NAICS code 541380.

California Department of Transportation

POSTED

DEADLINE

in about 1 month

Laboratory Ventilation Testing and CertificationThis subcontract opportunity is for Laboratory Ventilation Testing and Certification to support prime contractors on San Francisco Unified School District facility projects. The selected provider will perform specialized testing and official certification of both new and existing bio-safety cabinets and laboratory fume hoods. Using smoke generators and airflow velocity meters, the contractor must verify proper containment and airflow, ultimately providing official certification labels and detailed reports for every unit tested. The project is managed by the San Francisco Unified School District Facilities Design and Construction Department and will be performed in San Francisco, California. Qualified bidders must possess certification authority recognized by local and California state agencies. The solicitation was posted on October 26, 2026, with a response deadline of November 12, 2026.

San Francisco Unified School District Facilities Design and Construction Department

POSTED

DEADLINE

Vehicle Compliance Testing & InspectionThe Vehicle Compliance Testing and Inspection subcontract involves providing essential legal testing and safety inspections for prime contractors delivering vehicles to School District 68 Nanaimo-Ladysmith in British Columbia, Canada. The scope of work includes conducting safety inspections, weight distribution checks, and legal compliance certifications from the point of initial receipt through final acceptance. These services must be performed using appropriate weigh scales and safety tools to ensure all requirements mandated by law under Section 3.3 are met. The selected provider is responsible for delivering all necessary inspection reports and certifications to verify compliance. This opportunity is categorized under NAICS code 541380 and is associated with the Province of British Columbia. Interested parties should note the response deadline of November 26, 2026.

School District 68 Nanaimo-Ladysmith

POSTED

DEADLINE

More opportunities from Michigan → Millington Community Schools

Same awarding agency

Firestopping & Penetration SealingThis subcontract for Millington Community Schools in Michigan involves the installation of fire-rated seals for prime contractors on school facility projects. The scope of work focuses on applying through-penetration firestop systems to mechanical and electrical lines using penetration sleeves and fire-rated sealants to ensure building fire ratings are maintained. The selected contractor must provide certified fire-stopped penetrations and ensure all systems are UL-listed. Interested parties must submit their responses by November 9, 2026, for this project categorized under NAICS code 238160.

Roofing Contractors

POSTED

DEADLINE

Metal FabricationsThis subcontract opportunity with Millington Community Schools involves the fabrication and installation of custom metal supports, enclosures, equipment supports, and guards for school facility projects in Millington, Michigan. The selected contractor will be responsible for utilizing welding and bending tools to create these components, and personnel may be required to hold AWS certifications to ensure quality and safety standards are met. The project is categorized under NAICS code 332312 and requires the delivery of fully installed metal fabrications. Interested parties must submit their responses by the deadline of November 9, 2026, following the posting date of October 19, 2026.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Mechanical & Piping SystemsThis subcontract for Mechanical and Piping Systems involves the installation of mechanical piping and fuel lines for school facility projects in Millington, Michigan, on behalf of Millington Community Schools. The scope of work includes the installation of shaped piping, lubrication systems, and fuel delivery lines, all of which must be completed according to manufacturer recommendations to deliver a fully functional system. Qualified candidates must be an Authorized Plumber or a manufacturer-certified installer. The solicitation was posted on October 19, 2026, with a response deadline of November 9, 2026. This project falls under NAICS code 238220.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Concrete Pad & Paving (Site Work)This subcontract for Millington Community Schools in Michigan involves the construction of structural concrete bases and site paving for school facility projects. The scope of work includes forming and pouring concrete generator pads, installing cement concrete pavement, and applying pavement joint sealant to ensure a cured, level finish. To ensure quality and compliance, the contractor must provide material test reports from a qualified testing agency. The solicitation was posted on October 19, 2026, with a response deadline of November 9, 2026, falling under NAICS code 238910.

Site Preparation Contractors

POSTED

DEADLINE

Electrical Systems & DistributionThis subcontract for Electrical Systems and Distribution involves performing electrical wiring and integration for prime contractors on school facility projects for Millington Community Schools in Michigan. The scope of work includes the selective demolition of existing lines, the installation of conduits and wiring, and the completion of final electrical connections utilizing torque-sensitive flexible connectors to deliver a fully functional distribution system from the generator to building loads. The project requires a Licensed Master Electrician and strict adherence to National Electrical Code compliance. Interested parties must respond by November 9, 2026, for this project categorized under NAICS code 238210.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Generator Equipment Supply & InstallationThis subcontract agreement involves the supply and installation of primary generator units and control systems for school facility projects managed by Millington Community Schools in Michigan. The scope of work includes the delivery of generator sets, placement on concrete pads, connection to electrical and fuel systems, and final commissioning to ensure a fully operational backup power system. To maintain quality and safety standards, all equipment must be UL Listed and CE Marked, and installation must be performed by manufacturer-certified personnel. Interested parties must respond by November 9, 2026, regarding this project which falls under NAICS code 333611.

Turbine and Turbine Generator Set Units Manufacturing

POSTED

DEADLINE

RFP-MILL-270000000104-2 | Backup Generators for Kitchens

Solicitation # 2026008A

Millington Community Schools is soliciting bids for the installation of a new generator system at Millington Jr./Sr. High School, located at 8780 Dean Drive, Millington, Michigan. This project will be executed under a single prime contract for all trades, with a required completion date of June 30, 2027. The contract is a stipulated sum agreement utilizing AIA Document A105-2007. Bidders must adhere to strict submission guidelines, including providing a proposal guarantee of 5% of the basic proposal and submitting bids in sealed opaque envelopes. The successful bidder will be required to furnish performance and labor and material payment bonds, each for 100% of the contract amount. The project is subject to the State of Michigan Prevailing Wage Law (Act 10 of 2023). Technical requirements include compliance with NFPA 70, NFPA 80, and various UL and IEC standards, with specific certifications following MIL-STD-810C. Deliverables include the generator system and the installation of Schedule 40 steel pipe metal bollards. Bidders must provide sworn, notarized certifications regarding the Iran Economic Sanctions Act and disclose any familial relationships with the School Board or Superintendent. Payment requires the submission of three signed and notarized copies of each application for payment to the Architect, accompanied by waivers of mechanic's liens and specific AIA documentation.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Concrete/Site ContractorThis subcontract agreement appoints a Concrete/Site Contractor to perform essential site preparation and concrete work for facility projects managed by Millington Community Schools. The scope of work includes excavation, grading, and the installation of a reinforced concrete equipment pad utilizing formwork, rebar, and ready-mix concrete. To ensure structural integrity and quality, the contractor is required to adhere to all local building codes and submit material test reports from a qualified testing agency. The project is categorized under NAICS code 238110 and was posted on October 15, 2026, with a response deadline of November 9, 2026. The primary objective of the engagement is the successful delivery of a completed concrete equipment pad that meets all specified technical and regulatory standards.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Mechanical Contractor (Generator Support)This subcontract opportunity is for a Licensed Mechanical Contractor to perform specialized installations for prime contractors on Millington Community Schools facility projects. The scope of work involves the installation of exhaust piping, fuel lines, ventilation, and mechanical supports, specifically focusing on the delivery of installed mechanical support systems for the generator as detailed in Mechanical Drawings Sections A-ZZ. The project falls under NAICS code 238220 and is associated with the state of Michigan. Interested parties must submit their responses by the deadline of November 9, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Electrical Contractor (Generator Integration)This subcontract for Millington Community Schools requires a Licensed Electrical Contractor to perform electrical installation and integration for facility projects. The scope of work includes executing selective demolition according to Section 2605S, preparing primary wiring to maintain existing service, and installing power supplies, batteries, and torque-sensitive flexible conduits. The ultimate goal is the delivery of a fully operational and integrated electrical power system that complies with Division 26 specifications. The opportunity is categorized under NAICS code 238210 and was posted on October 15, 2026. Interested parties must submit their responses by the deadline of November 9, 2026. This project is managed within the state of Michigan and involves working as a subcontractor for prime contractors to ensure all electrical integration meets the specified technical standards.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Emergency Generator Set SupplierThis subcontract agreement establishes the requirements for a supplier to provide industrial-grade emergency generator systems for facility projects managed by Millington Community Schools. The selected supplier is responsible for the manufacture and delivery of the generator set, control panels, and fuel storage tanks directly to the project site. To ensure quality and safety, all equipment must be UL Listed and CE Marked. The supplier is further required to provide comprehensive technical documentation, including fabrication drawings, product data, material test reports, and detailed installation procedures. Interested parties must submit their responses by November 9, 2026, in accordance with the solicitation posted on October 15, 2026.

Turbine and Turbine Generator Set Units Manufacturing

POSTED

DEADLINE

RFP-MILL-270000000104-1 | Backup Generators for Kitchens

Solicitation # RFP-MILL-270000000104-1

Millington Community Schools is soliciting bids for the installation of a new backup generator system at Millington Jr./Sr. High School, located at 8780 Dean Drive, Millington, Michigan. This project, identified as Project No. 2026008A, will be executed under a single prime contract with a required completion date of June 30, 2027. The solicitation, posted on October 15, 2026, requires responses by November 9, 2026. All work must adhere to strict quality and safety standards, including NFPA 70, NFPA 80, and various UL certifications, with specific testing requirements following MIL-STD-810C and IEC standards. Bidders must provide a proposal guarantee of 5 percent of the basic proposal and, upon selection, furnish performance and labor and material payment bonds for 100 percent of the contract amount. This is a prevailing wage project governed by the State of Michigan Prevailing Wage Law. Mandatory submission requirements include a sworn and notarized certification of compliance with the Iran Economic Sanctions Act and a notarized disclosure of any familial relationships with the School Board or Superintendent. Payment processing requires the submission of three signed and notarized original copies of payment applications to the Architect, accompanied by mechanic's lien waivers and AIA Document G707.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

PCB Oil Sampling and Laboratory Analysis

City of Anaheim

POSTED

DEADLINE

Hydrogeological Consultant (Injection & Recharge)

Municipal Utilities Department of City of Ontario

POSTED

DEADLINE

Special Testing & Inspections

Department of Public Works

POSTED

DEADLINE

Airfield Photometric Testing at Southwest Florida International Airport

Solicitation # 2026-115-BW

Maintenance Airfield

POSTED

DEADLINE

Supplemental Water Testing and Meter Reading Personnel

Philadelphia Housing Authority

POSTED

DEADLINE

Specialized Water Laboratory Testing Services

Philadelphia Housing Authority

POSTED

DEADLINE

Water Quality Laboratory Analysis Services

Philadelphia Housing Authority

POSTED

DEADLINE

RFP #502-26 On-Call Geotechnical Services

Solicitation # 502-26

Dawson County Board of Commissioners

POSTED

DEADLINE

Ride and Game Safety Inspection Services

Solicitation # 27-001

State of California

POSTED

DEADLINE

Testing Services

Solicitation # EV00000988

Oklahoma Construction Industries Board

POSTED

DEADLINE

in about 1 month

Environmental Sampling and Laboratory Analysis

City of El Segundo

POSTED

DEADLINE

Concrete and Asphalt Materials Testing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS