Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Thyristor Semiconductor Device Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply of eleven units of the RA001 model thyristor semiconductor device, identified by the National Stock Number 5961-01-226-2103, to meet established military specifications. These components are critical for defense applications and must comply with all relevant performance and quality standards dictated by military requirements. Delivery is structured under FOB origin terms, meaning the supplier is responsible for the goods until they are loaded onto the carrier at the point of origin, after which the risk and responsibility transfer to the receiving party. Inspection rights are retained by the destination authority, allowing for verification of compliance and condition upon arrival. The contract is classified as a subcontract under the NAICS code 334413, which corresponds to semiconductor and related device manufacturing. It is issued by the Defense Logistics Agency under the Department of Defense, with the award referenced under contract number SPE7M026P3837, and was posted on July 20, 2026.

General Info

Eleven RA001 thyristors delivered FOB origin for military use under DLA contract SPE7M026P3837.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

334413 - Semiconductor and Related Device ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 11 units of thyristor semiconductor device (RA001 model, NSN 5961-01-226-2103) meeting military specifications, delivered FOB origin with destination inspection.

Similar Contracts

Same NAICS industry code

Microcircuit Component Supply (Semiconductor Device)The contract involves the supply of a digital microcircuit identified by NSN 5962-01-479-8493, encompassing full lifecycle support including rigorous testing, end-to-end traceability, and compliant packaging and delivery per military specifications. This subcontract is issued under the NAICS code 334413 for semiconductor device manufacturing and is managed by the Defense Logistics Agency on behalf of the Department of Defense. All deliverables must meet stringent military standards to ensure reliability and performance in defense applications. The award is posted as of July 20, 2026, with performance obligations tied to U.S. military requirements and no set-aside designations applied. The contract reference number SPE7M026P1290 links directly to the official DIBBS platform for tracking and administrative purposes.

Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

Defense-Grade Semiconductor Supply (NSN 5961-01-729-5214)The contract specifies the supply of seven units of a defense-grade semiconductor device identified by NSN 5961-01-729-5214, engineered to meet stringent military specifications for packaging, marking, and handling. These components are critical for defense systems and must comply with all applicable DoD standards to ensure reliability, traceability, and performance in operational environments. Delivery is mandated to DLA Distribution in New Cumberland, Pennsylvania, aligning with the Defense Logistics Agency’s centralized supply chain protocols for logistics readiness and fleet support. This is a subcontract issued under the NAICS code 334413, categorizing it within semiconductor and other electronic component manufacturing. The contract was posted on July 20, 2026, and is administered by the Department of Defense through the Defense Logistics Agency. While no specific solicitation number or point of contact is listed, the contract is accessible via the DIBBS portal using the referenced award number. The requirement reflects a focused procurement aimed at sustaining military-grade electronic components within the DoD’s supply chain infrastructure.

Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

Supply of ESD-Sensitive Semiconductor Devices (NSN 5961-01-683-3779)The contract entails the procurement, packaging, marking, and delivery of 114 units of a military-spec semiconductor device identified by NSN 5961-01-683-3779, requiring full compliance with stringent environmental and security standards. Each unit must be protected against electrostatic discharge and electromagnetic interference, packaged according to military specifications, and secured to meet current cybersecurity requirements to ensure operational integrity in defense environments. The work is classified as a subcontract under NAICS code 334413 and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 20, 2026, with performance location details unspecified, and the contract can be accessed through the DIBBS portal under award number SPE7M026P3847.

Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

Linear Microcircuit Supply (NSN 5962-01-051-2101)The contract requires the supply of 26 military-grade linear microcircuits identified by NSN 5962-01-051-2101, with full traceability throughout the production and delivery process, compliant packaging to meet defense standards, and strict adherence to defense logistics protocols, export control regulations, and hazardous materials handling requirements. All units must conform to rigorous defense specifications to ensure operational reliability and security in sensitive military applications. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, designated under FAR 19.5, and classified under NAICS code 334413 for electronic component manufacturing. The performance location is specified as Columbus, Ohio, with a zip code of 43213, and the contracting activity falls under the Department of Defense’s Active Devices Division. The opportunity was posted on July 20, 2026, with responses due by July 31, 2026, and is accessible via the DIBBS platform for qualified small businesses seeking defense contract opportunities.

ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

SWITCH, THERMOSTATICThe contract solicitation SPE7M8-26-T-5321 seeks the procurement of four thermostatic switches with NSN 5930-01-466-3524 for delivery to Tracy, CA, under a 168-day ADO (As Directed by Order) timeline. The item must be commercially packaged per ASTM D3951, with DLA Master List of Technical and Quality Requirements taking precedence, and palletized according to RP001. All packaging and labeling must adhere to MIL-STD-129 including mandatory barcoding and Data Matrix marking, with hazardous material handling governed by Fed-Std-313 and TQ Requirement IP025 if applicable, and hazard communication labels required per 29 CFR 1910.1200. Delivery terms are FOB Destination, with the consignee identified as DLA DIST SAN JOAQUIN at 25600 S CHRISMAN ROAD, REC WHSE 57, Tracy, CA 95304-5000. The contract requires compliance with a comprehensive set of Federal Acquisition Regulation clauses, including mandatory safeguarding of contractor information systems per 52.240-93 and 252.240-7997, cybersecurity incident reporting under 252.204-7012, hazardous material identification and Safety Data Sheet disclosure under 52.223-3, and employment eligibility and anti-trafficking requirements. Invoicing must be submitted through WAWF, and payment routing depends on DoDAAC codes to be specified in the award. Offerors must provide a Unique Entity Identifier and CAGE code, represent their small business status accurately under FAR 52.219-28, and disclose if providing covered defense telecommunications equipment. The solicitation allows for alternate offerors to submit complete data packages for both approved and alternative parts, and the basis of award is implied to be either lowest price technically acceptable or trade-off, though formal evaluation factors are not defined. The contract includes option periods extending beyond five years, and requires compliance with all applicable DLA packaging and transportation directives including notification of sea transportation per 252.247-7023. All documentation must be electronically submitted via DIBBS by the deadline of July 23, 2026, with technical data uploaded

ELECTRICAL DEVICES DIV

POSTED

about 20 hours ago

DEADLINE

MICROCIRCUIT, DIGITAThe contract pertains to the procurement of three digital microcircuits with NSN 5962-01-233-4079 under solicitation SPE7M5-26-T-336N, with a delivery schedule of 222 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The item is classified as qualified under FSC 5962 and must comply with the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List as outlined in Procurement Note M01. Physical identification and marking of the bare item are required per RQ017, and packaging must adhere to DLA packaging standards. The contractor is obligated to retain complete supply chain traceability documentation in accordance with DLA Directive Procurement Note C03 from August 2016, ensuring end-to-end provenance throughout the supply chain. Government identification must be removed from any non-accepted supplies. The solicitation is open for responses until July 31, 2026, with the point of contact being Margaret Smith of the Department of Defense's Active Devices Division, based in Columbus, Ohio. The NAICS code 334413 indicates the procurement falls under semiconductor and related device manufacturing. An alternate offeror must submit a complete data package covering both the primary and alternate part specifications.

ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

CONTACT, ELECTRICALThe contract pertains to the procurement of electrical contacts with NSN 5999-00-064-3235, for a quantity of 11 units, under solicitation SPE7M5-26-T-307B, with a response deadline of July 23, 2026, and delivery required within 168 days after award. The item is governed by DLA packaging and technical requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Specific quality mandates include the removal of government identification from non-accepted supplies and physical identification or bare item marking requirements. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, and chemical reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary as per NAVSEA 5100-003D. The place of performance is Tracy, California, 95304-5000, and the contracting office is the Department of Defense’s Active Devices Division, with Margaret Smith as the primary point of contact. An alternate offeror must submit a complete data package including specifications for both the approved and alternate part, as no data is currently available.

ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

MICROCIRCUIT, LINEARThis contract is for the procurement of 26 units of a linear microcircuit, identified by NSN 5962-01-051-2101, under solicitation SPE7M5-26-T-336S, which is a total small business set-aside with a NAICS code of 334413. The item falls under Federal Supply Class 5962 for electronic microcircuits and is subject to stringent quality, traceability, and packaging requirements mandated by the Defense Logistics Agency. All suppliers must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and must be qualified under the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List for FSC 5961 and 5962. Traceability documentation must be meticulously maintained in accordance with DLA Directive Procurement Note C03 and submitted via the DLA Land and Maritime Form 918, which must be emailed to the contract administrator at least 15 days prior to delivery with all attachments compressed to under 15 MB and properly labeled. Shipment is prohibited until explicit written authorization is received, and failure to comply with documentation accuracy or timing voids payment eligibility. The contractor must also adhere to physical marking requirements per IPC/JEDEC J-STD-609 for lead finish identification on each unit pack, and conform to DLA packaging standards and bare item marking specifications. Technical data associated with this item is subject to export controls under ITAR or EAR, and access is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal authorization from DLA. Any disclosure to foreign nationals, regardless of location, is prohibited without authorization. The government will not accept surplus material, and all deliveries must be made to Columbus, Ohio within 221 days of award. Primary point of contact for inquiries is Cindy McAninch of the Department of Defense’s Active Devices Division, with all submissions and communications routed through the designated DLA systems and protocols.

ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

SWITCH, FLOWThe contract pertains to the procurement of four units of a SWITCH, FLOW identified by NSN 5930-01-455-8707 under solicitation SPE7M8-26-T-5365, with a mandatory delivery window of 168 days after award and a need ship date of January 5, 2027. The item is restricted to prequalified manufacturers only, and any alternative sources must provide extensive technical data to demonstrate suitability under DLAI 3200.1, Encl 6. Mercury or mercury-containing compounds are strictly prohibited in the product unless part of exempted functional components such as batteries, fluorescent lights, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, and portable devices containing mercury must include shock-proof design and a secondary containment barrier per NAVSEA 5100-003D. The item must be packaged and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, utilizing Cling/Dry preservation method 41 and adhering to all DLA Packaging Requirements for Procurement (RP001) standards. Delivery is to the DLA Distribution facility at DDSP New Cumberland, PA, under FOB Origin terms, with final inspection and acceptance conducted by the Government at the destination. All hazardous materials must be properly labeled per 29 CFR 1910.1200 and DFARS 252.223-7001, requiring prior submission of hazard warning labels for review before award. The contract mandates electronic invoicing through WAWF with specific document types based on the line-item structure, and compliance with NIST SP 800-171 for information system safeguarding and the antiboycott, trafficking in persons, and employment eligibility verification clauses. The solicitation requires full UEI and CAGE code disclosures, socioeconomic status certifications, and adherence to small business size standards under NAICS 334413, while prohibiting any unapproved substitutes without formal evaluation. All submissions must be electronically filed via the DIBBS portal by July 23, 2026, and the contract contains multiple deviation-modified clauses from FAR and DFARS, including changes, subcontracting, inspection, and accelerated payments for small business subcontractors. Although critical pricing information is omitted, the contract enforces stringent technical, safety, and

ELECTRICAL DEVICES DIV

POSTED

about 20 hours ago

DEADLINE

TRANSFORMER, POWERThis contract pertains to the procurement of 12 power transformers identified by NSN 5950-00-686-1685, under solicitation SPE7M5-26-T-337F, with a response deadline of July 31, 2026, and a required delivery within 52 days of award. The item is classified as a restricted source requiring engineering source approval from the government design control activity, and all submissions must comply with the DLA Master List of Technical and Quality Requirements, with the applicable revision based on the solicitation or award date. Offerors must provide comprehensive documentation including all manufacturing drawings and specifications, detailed process and operation sheets with inspection criteria, identification of all critical process suppliers including forgings and castings, and a shock extension report conforming to MIL-S-901 and DI-ENVR-80706. If original equipment manufacturer drawings are unavailable, an engineering analysis report must be submitted detailing the development methodology, and if reverse engineering was employed, a full account of sampling procedures, measurement techniques, data collection, tolerance justifications, and acceptance rationale must be included for government review. The place of performance is specified as San Diego, CA, with primary point of contact Mark Bayless at the Department of Defense’s Active Devices Division.

ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

MICROCIRCUIT, DIGITALThis contract is for the procurement of a digital microcircuit, identified by NSN 5962-01-287-4338 and part number M38510/31201BEA, under Federal Supply Class 5962, with a required quantity of six units to be delivered within 157 days to Columbus, Ohio. The item must comply with stringent military and defense standards, including technical and quality requirements referenced from the DLA Master List, and is subject to qualification under the Qualified Manufacturers List and Qualified Suppliers List for semiconductors and electronic microcircuits. Supply chain traceability is mandatory per DLA Procurement Note C03, requiring the contractor to retain and submit documentation for verification prior to shipment. The contractor must complete and submit the DLA Land and Maritime Form 918 with traceability or test reports to the specified email address at least 15 days before delivery and receive written authorization before shipping; failure to comply voids payment. All packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, including special ESD marking code 39, and must use DOD-qualified ESD and EMI protective materials as defined by MIL-PRF-81705. Lead finish markings must conform to IPC/JEDEC J-STD-609, with proper placement and documentation. Additional requirements include the prohibition of intentional mercury additions, adherence to CMMC Level 2 self-assessment, and strict compliance with packaging, cushioning, and component protection standards to prevent physical and electrostatic damage. The contract permits full and open competition and requires the use of approved sources for parts, with all shipments subject to inspection and acceptance at destination.

ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

MICROCIRCUIT, DIGITAThis contract pertains to the procurement of a digital microcircuit classified under Federal Supply Class 5962, with the specific part number 5962010783730 and a quantity of 12 units. The item is designated as a commercial item and must comply with a comprehensive set of technical, quality, and packaging standards, including incorporation of requirements from the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. The contractor is required to adhere to configuration change management protocols, maintain supply chain traceability per DLA Directive Procurement Note C03, and ensure all documentation is retained and submitted according to strict guidelines, including timely email submission of the DLA Land and Maritime Form 918 with unredacted traceability or test reports. Shipment is prohibited until written authorization is received from the contract administrator, and failure to comply with documentation or packaging requirements can result in non-final payment. The item must be packaged in accordance with MIL-STD-2073-1E and marked per MIL-STD-129, with additional lead finish identification required under IPC/JEDEC J-STD-609. ESD and EMI protection is mandatory, requiring packaging materials qualified under MIL-PRF-81705 and sourced only from manufacturers on the QPL-81705 list. Cushioning must meet A-A-59136 Class 1 Grade B density specifications, with thickness exceeding lead length by at least 1/8 inch unless using form-fitting ESD containers. The use of mercury or mercury compounds is strictly prohibited except for approved functional applications, and portable devices containing mercury must include secondary containment. Sampling for acceptance follows MIL-STD-1916 or equivalent zero-based plans, with acceptance criteria of zero non-conformances unless otherwise specified. Delivery is FOB origin with a 144-day timeline, and the final destination is the DLA Distribution facility in Columbus, Ohio.

ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Epinephrine Injection (NSN: 6505015273957)The contract mandates the manufacture, packaging, labeling, and delivery of FDA-approved Epinephrine Injection meeting all current Good Manufacturing Practices and Defense Logistics Agency specifications, with the final product destined for a U.S. Navy vessel under FOB Destination terms. The product is identifiable by National Stock Number 6505015273957 and falls under the NAICS code 283410, indicating its classification within pharmaceutical manufacturing. All activities must adhere strictly to regulatory and military standards to ensure safety, potency, and compliance throughout the supply chain. The agreement is structured as a subcontract managed under the Department of Defense through the Defense Logistics Agency, with the work scheduled to be performed in alignment with federal procurement timelines and delivery protocols. The contract was posted on July 20, 2026, and the delivery endpoint is a U.S. Navy vessel, requiring precise logistical coordination and documentation to meet military operational needs. The product must be fully compliant with both FDA and DLA requirements, including proper labeling, traceability, and packaging suitable for military transport and storage conditions.

POSTED

about 20 hours ago

DEADLINE

Wiper Ring Supply – Precision Sealing ComponentThe contract entails the supply of 17 precision-engineered wiper rings, identified by Part Number 351-44900-330A and National Stock Number 5330-01-284-1598, manufactured to meet specific military standards for performance and reliability. Each unit must comply with all relevant technical and quality requirements, including proper packaging and labeling as dictated by defense regulations. Delivery must be completed in full accordance with established logistical protocols to ensure operational readiness and traceability. The contract is structured as a subcontract under the authority of the Defense Logistics Agency, part of the Department of Defense, and classified under NAICS code 332996, indicating its focus on other fabricated metal product manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to align with DLA’s supply chain directives, though the specific delivery location and point of contact are not detailed. Access to official contract records is available through the DIBBS portal using the provided reference number.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 20 hours ago

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information handled by the contractor. This includes establishing and sustaining a compliant security posture across systems and networks that process, store, or transmit sensitive defense data, ensuring that all required controls are properly configured, monitored, and documented. The contractor must also be prepared to support timely and accurate cyber incident reporting in accordance with federal requirements, enabling rapid response and coordination with defense authorities when security breaches or anomalies occur. This subcontract falls under the NAICS code 541512 for computer systems design services and is issued by the Defense Logistics Agency under the Department of Defense. The work is focused on sustaining compliance with stringent federal cybersecurity standards, and while no specific location is listed for performance, the obligations apply wherever covered defense information is accessed or managed. The contract underscores a critical requirement for continuous adherence to NIST controls and active participation in the defense cyber incident response framework, making cybersecurity expertise and operational readiness key to successful contract execution.

Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE

Hazardous Materials Compliance & DocumentationThe contract requires strict adherence to OSHA Hazard Communication standards and DFARS 252.223-7001 for all hazardous materials linked to connectors, ensuring proper labeling and accurate safety data sheet generation to meet federal regulatory requirements. All documentation must align with current guidelines to facilitate safe handling, storage, and disposal of chemical substances used in the procurement and integration of these components. This subcontract, issued under NAICS code 541620 by the Defense Logistics Agency within the Department of Defense, mandates compliance as a non-negotiable condition of performance. While specifics on location or point of contact are not provided, the obligation extends to all stages involving hazardous materials associated with connectors, and failure to deliver compliant labeling and SDS documentation could result in contract non-compliance. The posting date indicates this requirement is active for future performance beginning in 2026.

Environmental Consulting Services

POSTED

about 20 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires the performance of zero-defect quality inspections using either MIL-STD-1916 or ASQ H1331 sampling methods to verify that all delivered products meet the stringent acceptance standards of the Defense Logistics Agency. These inspections are critical to ensuring full conformance and are conducted to support DLA’s mission of reliably supplying defense systems and materiel with no tolerance for nonconformities. The work is classified under NAICS code 541330, indicating it falls within the professional, scientific, and technical services sector, specifically in the realm of quality assurance and inspection. The contract is structured as a subcontract and is tied directly to DLA operations under the Department of Defense, with performance expected to align precisely with federal quality benchmarks without deviation. All activities must be executed to guarantee that every unit received by DLA is fully compliant, with no room for defective or nonconforming product acceptance.

Engineering Services

POSTED

about 20 hours ago

DEADLINE

Packaging and Marking of Military-Grade ComponentsThe contract requires the provision of packaging and marking services for electrical connectors in strict compliance with MIL-STD-2073-1E for packaging standards and MIL-STD-129 for item marking, all in support of the Defense Logistics Agency. The components are destined for military use under the Department of Defense and must meet exacting federal specifications to ensure durability, traceability, and logistical compatibility across the defense supply chain. The work is structured as a subcontract under NAICS code 423840, which pertains to wholesale trade of electronic components and equipment, indicating the scope is focused on preparation and shipment readiness rather than manufacturing. Performance is expected to align with DLA’s standards for federal supply systems, though no specific location for performance or point of contact is listed. The solicitation is posted under contract SPE7M126V050N and was published on July 20, 2026, with no set-aside provisions indicated, meaning it is open to all qualified subcontractors. Full adherence to military standards is critical, as non-compliance could result in rejection of shipments, delays in delivery, or financial penalties. All packaging must preserve the integrity of the connectors during transport and storage, while marking must include universally recognized DOD identifiers, barcodes, and data matrix codes to enable automated receipt and inventory management at military depots worldwide.

Industrial Supplies Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Supply of Electrical Plug Connectors (MS3406D40-56P / NSN 5935011427787)The contract entails the manufacture and supply of 43 military-spec electrical plug connectors specified as MS3406D40-56P with the NSN 5935011427787, all of which must fully comply with applicable MIL standards to ensure reliability and interoperability in defense systems. The item is critical for military applications requiring high-performance electrical connections under demanding environmental and operational conditions. This is a subcontract issued under the authority of the Defense Logistics Agency within the Department of Defense, with a posting date of July 20, 2026, indicating it is part of a broader procurement effort managed through the DLA’s contracting system. The NAICS code 334417 confirms the scope falls within the aerospace and electronic component manufacturing sector. Performance location and specific delivery details are not yet defined, and no set-aside provisions are indicated, meaning the contract is open to all eligible contractors. The sole point of reference for award and tracking purposes is the DIBBS system under contract number SPE7M126V050N.

Electronic Connector Manufacturing

POSTED

about 20 hours ago

DEADLINE

Domestic Freight and Delivery to DLA DepotTwo reconditioned circuit card assemblies must be transported from the rework facility to the DLA Distribution Depot in Tracy, California, with delivery required no later than August 19, 2026. The shipment is governed by FOB Origin terms, meaning the buyer assumes all risk and responsibility for the goods once they leave the rework facility. The contract falls under NAICS code 484220, indicating it is a domestic freight transportation service, and is classified as a subcontract within the Department of Defense framework. The Defense Logistics Agency is the contracting organization, and the work is being performed under solicitation SPE4A626PX555, with the opportunity posted on July 20, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

Supply Chain Traceability and Documentation ServicesThe contract requires the compilation and verification of detailed documentation to establish the prior government ownership and reconditioning history of surplus electronic items, ensuring full compliance with federal requirements prior to submission. This work is critical for maintaining the integrity and traceability of the defense supply chain, as accurate records are necessary to confirm legal and regulatory adherence throughout the lifecycle of the equipment. The contractor must rigorously authenticate provenance and reconditioning data to support transparency and accountability in the disposition process. This subcontract is part of a larger effort managed by the Defense Logistics Agency under the Department of Defense, aligning with NAICS code 541611 for management consulting services. The project involves meticulous record gathering, validation, and formatting to meet stringent government standards, with no specific location specified for performance. The solicitation was posted in July 2026 and is tied to contract SPE4A626PX555, indicating its role within an established procurement pathway for supporting defense logistics operations.

Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE

Inspection, Packaging, and Marking of Reconditioned ElectronicsThe contract pertains to the final inspection, preservation, packaging, and labeling of reconditioned circuit card assemblies to ensure full compliance with military packaging and marking standards. This effort is critical to maintaining the integrity, functionality, and traceability of electronic components used in defense systems, requiring strict adherence to established federal and military specifications throughout every phase of handling. The work involves detailed quality control procedures to verify that each assembly meets performance criteria prior to being preserved against environmental degradation, securely packaged, and accurately labeled in accordance with mandated military protocols. This subcontract is issued under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 493190 for other warehousing and storage. The solicitation was posted on July 20, 2026, and the place of performance is not specified, suggesting the work may be conducted at any approved contractor facility capable of meeting the rigorous defense standards. The contract's purpose is to support the sustainment and readiness of military electronics by ensuring that reconditioned components are handled, stored, and shipped with the same precision and reliability as new units, thereby reinforcing the logistical backbone of defense operations.

Other Warehousing and Storage

POSTED

about 20 hours ago

DEADLINE

Reconditioning of Government Surplus Circuit Card AssembliesThe contract entails the reconditioning of government surplus circuit card assemblies to restore them to original technical specifications and military standards for reuse. This involves the systematic replacement of expired or degraded components, thorough functional testing to ensure operational integrity, and adherence to all applicable military performance and reliability requirements. The work must be performed with precision to guarantee that the returned assemblies meet the identical functional and environmental criteria as newly manufactured units, ensuring they are fully viable for military systems and platforms. This subcontract is issued under the Defense Logistics Agency within the Department of Defense and falls under NAICS code 334418 for electronic component and product manufacturing. The solicitation was posted on July 20, 2026, and the performance location and point of contact details are not specified, though the work is tied to DLA’s broader initiative to extend the life cycle of critical electronic assets. The contractor is expected to deliver reconditioned assemblies that are fully compliant, documented, and ready for immediate integration into defense systems without the need for additional modification or qualification.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 20 hours ago

DEADLINE

Cybersecurity Compliance (CMMC Level 2)The contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to protect covered defense information, ensuring alignment with the Defense Federal Acquisition Regulation Supplement (DFARS) 252.204-7012. This includes establishing robust cyber incident reporting procedures to meet federal requirements for timely disclosure of security breaches involving sensitive defense data. The work must support compliance at the Cybersecurity Maturity Model Certification Level 2 standard, which demands a structured approach to cybersecurity readiness, documentation, and continuous monitoring across the organization’s information systems. The effort is classified as a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code for computer systems design and related services. Performance is expected to be carried out in support of federal defense operations, with no geographic restrictions specified.

Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE