Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Transportation was posted on June 11, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Tile replacement at LBB ATCT (Lubbock, TX)

Closed
Tile_replacement_at_LBB_ATCTFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238340
New
SLED
LaRue IRA - Bathroom Floor Replacement
Solicitation # 2140323
The New York State Office for People with Developmental Disabilities Finger Lakes DDSO is soliciting bids for the replacement of an epoxy flooring system with tile at the LaRue IRA facility located at 105 Charles St, Wayland, NY 14572. This is an Article 8 NYS Public Works project requiring the payment of prevailing wages under PRC number 2026030268. The selected vendor must provide all labor and materials to complete the installation in accordance with Patriot Designs blueprints dated October 13, 2026, and all applicable local and state building codes. The project must be completed within 90 days of the award, with work performed continuously from Monday through Friday. A mandatory site visit is scheduled for November 12, 2026, at 10:00 AM; failure to attend the entire visit will result in disqualification. Bids must be submitted using the Official Quote Submission Form by November 20, 2026, at 8:00 PM via email or fax to Franchesca Sagen. To avoid disqualification, bidders must provide a valid NYSDOL registration number and Certificate of Registration at the time of submission. Evaluation for the award will include a review of prior work performance. Once awarded, the contractor must coordinate with the Plant Superintendent and House Director, provide Safety Data Sheets, and maintain a secure, clean site daily, as the facility is an occupied residence. Final payment is subject to the submission of certified payroll and a quality control inspection approved by the Maintenance Supervisor.
NYS Office for People with Developmental Disabilities

POSTED

about 21 hours ago

DEADLINE

in 22 days
NAICS: 238340
New
SLED
Pool Plastering And Tile Replacement Services
Solicitation # 26-27-21
The City of Santa Clara is soliciting bids for pool plastering, tile replacement, and coping replacement services to support its Parks and Recreation Department. The scope of work includes providing all labor, materials, and equipment for the maintenance of two pools, including a smaller pool measuring approximately 40 by 30 feet with a 22,500-gallon capacity. Key deliverables involve pool draining, surface preparation, repairs, plastering, and curing, with all replacements using new materials of like kind. All work must adhere to the City of Santa Clara Standard Details and Specifications, the 2022 California Building Code Chapter 31B, and the National Plasterers Council Technical Manual. The contract will be awarded to the lowest responsive and responsible bidder. Minimum qualifications require a valid State of California Contractor’s License (Class A, B, or C-53), at least five years of industry experience evidenced by three customer references, and registration with the Department of Industrial Relations. As this is designated as a public work, contractors must pay prevailing wages per California Labor Code Section 1770. Additional requirements include a performance bond for projects exceeding $25,000, specific commercial general liability insurance limits, and the maintenance of a detailed on-site start-up log for final acceptance. Bids must be submitted electronically via BidNet Direct by November 19, 2026.
City of Santa Clara

POSTED

1 day ago

DEADLINE

in 22 days

General Info

NAICS

238340 - Tile and Terrazzo Contractors

Place of Performance

Lubbock, TX, 79403, USA

Set-Aside

SBA

Documents

2

ATCT Replace Raised Floor Site Plan and Vicinity Map

PDF, High priority: read this firstspecifications
High

LBB Raised Floor Replacement Project Specifications (JCN: 1302733)

PDF, High priority: read this firstspecifications
High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Transportation → 697DCK Regional Acquisitions Svcs
Contacts2 people available
OfficeFORT WORTH, TX, 76177, USA
Office AddressFORT WORTH, TX, 76177, USA

Full Description

Show more
The specifications, includes but is not limited to, the following: Removal and replacement of a ground level access (raised) floor system at LBB ATCT. Installation of a proper electrical grounding system for the access floor system at LBB ATCT compliant with FAA-STD-019G (see Appendix C). The total area of access flooring required to be removed and replaced is approximately 3,900 square feet. Removal and replacement of approximately 125 square feet of carpet floor finish on an existing access floor system in a ground level office at the LBB ATCT and other Work indicated in the Contract Documents.

More opportunities from Department Of Transportation → 697DCK Regional Acquisitions Svcs

Same awarding agency

NAICS: 541330
New
Federal
Design Renovation, System Support Center (SSC), 3551 Combine St., Paso Robles, CA
Solicitation # 697DCK-27-R-00022A
The Federal Aviation Administration is seeking engineering design services for the renovation of a 4,992 square foot leased building to serve as a System Support Center located at 3551 Combine St., Paso Robles, California. This procurement, identified by solicitation number 697DCK-27-R-00022A, is a Total Small Business Set-Aside. The selected contractor will be responsible for developing permit-ready Mechanical, Electrical, Plumbing, Life Safety, and Fire Protection drawings based on provided Design Intent Drawings. Key deliverables include three full-size stamped construction permit drawings approved by the City of Paso Robles, a dedicated life safety sheet, and all necessary electrical load and hydraulic calculations. All work must comply with 2022 California Building Codes and local standards. The period of performance is 130 days from the issuance of the Notice to Proceed, with a potential option to extend services for up to six months. Award will be based on the best value, considering successful price negotiations and conformance with solicitation terms. Offerors must submit their proposals in PDF or Word format to Linda Hennequant by November 12, 2026, ensuring the solicitation number is included in the subject line. Submissions must include a past performance record of at least three relevant projects completed within the last five years. Invoicing for this contract will be managed electronically through the Delphi eInvoicing web portal.
Engineering Services

POSTED

about 13 hours ago

DEADLINE

in 15 days
View Details
NAICS: 325992
Federal
Printer Consumables for the Strategic Sourcing for the Acquisition of Various Supplies and Equipment (SAVES) Program
Solicitation # 697DCK-25-R-00368
The Federal Aviation Administration (FAA) Office of Information and Technology is seeking a single qualified small business to establish an agency-wide indefinite delivery indefinite quantity (IDIQ) contract for toner and printer consumables under the Strategic Sourcing for the Acquisition of Various Equipment and Supplies (SAVES) program. This total small business set-aside, under NAICS 325992, covers over 750 items from specific original equipment manufacturers, including Brother, Canon, Dell, Epson, HP, Lexmark, Okidata, and Xerox. The contract features a five-year period of performance from February 19, 2027, to February 18, 2032, consisting of one base year and four one-year ordering periods, with a minimum ordering obligation of 1,000 dollars. Award will be made to the Lowest Priced Technically Acceptable (LPTA) offeror. Evaluation is based on non-price factors, including technical acceptability and past experience, and a price proposal evaluated via a discount-based model against manufacturer suggested retail prices. Proposals must be submitted in three volumes: Business, Technical, and Price. Following several amendments, the final proposal due date is November 5, 2026, at 5:00 PM ET. Deliveries are required for CONUS locations to specific delivery points, with OCONUS delivery permitted subject to approved shipping charges. Contractors must maintain a quality system ensuring high responsiveness for quote requests and customer service.
Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing

POSTED

8 days ago

DEADLINE

in 8 days
View Details
NAICS: 5417
Federal
BEYOND Phase 2
Solicitation # 697DCK-26-R-00423
Screening Information Request 697DCK-26-R-00423 is a competitive selection process for the Federal Aviation Administration's BEYOND Phase 2 program, managed by the Unmanned Aircraft Systems and Advanced Air Mobility Integration Office. This initiative seeks to award up to eight Other Transaction Agreements (OTAs) to State, Local, Tribal, or Territorial (SLTT) governments to test and evaluate emerging aviation concepts. The program focuses on four programmatic areas—infrastructure, scalability, safety, and automation—and five operational challenges, including controlled airspace, on-airport operations, and cross-border flights. This is a non-funded process where participants are responsible for their own costs, and the period of performance extends through September 30, 2029. Eligible offerors must be instrumentalities of an SLTT government, provide a letter of attestation, and maintain an active registration in the System for Award Management (SAM). Proposals are evaluated on a pass/fail basis for eligibility, followed by a holistic confidence rating of the Technical Submission Package based on goal specificity, innovation, alignment with FAA priorities, and the use of SMART methodology. Following several extensions, the final proposal submission deadline is October 30, 2026, at 3:00 pm ET. Submissions must be sent via email in PDF format, adhering to strict page limits and formatting requirements, including a 26-page limit for the main technical narrative.
Scientific Research and Development Services

POSTED

8 days ago

DEADLINE

in 1 day
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS