Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Titanium Step-Drill Bit Supply

Active

State & Local

Response Deadline08/10/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Nashville Electric Service is seeking to procure a single type of titanium step-drill bit featuring a titanium-nitride coating, a self-starting tip, and double-sided cutting edges with a maximum hole diameter of 7/8 inches and a 3/8-inch shank. The product must be sourced exclusively from approved manufacturers to ensure specified quality and performance standards. This subcontract opportunity is posted under NAICS code 332216 and is open for responses until August 10, 2026, at 7:00 PM. The place of performance is designated as Nashville, and interested vendors must submit their proposals via the official portal at the provided link before the deadline.

General Info

Nashville Electric Service seeks titanium step-drill bits with titanium-nitride coating, self-starting tip, 7/8-inch max hole, 3/8-inch shank, via approved manufacturers by August 10, 2026.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

332216 - Saw Blade and Handtool ManufacturingView NAICS

Place of Performance

Nashville, TN, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 07:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTennessee → Nashville Electric Service

ContactsNo contacts available

OfficeN/A

Organization / Agency

Tennessee → Nashville Electric Service

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of a single type of titanium step-drill bit with titanium-nitride coating, self-starting tip, double-sided cutting edges, 7/8" maximum hole diameter, and 3/8" shank. Must be sourced from approved manufacturers only.

Similar Contracts

Same NAICS industry code

WRENCH, SPANNER

Solicitation # SPE4A7-26-R-X988

The contract is for one wrench spanner with NSN 5120-01-154-3832 under solicitation SPE4A7-26-R-X988, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a total small business set-aside designation. The response deadline is August 10, 2026, and delivery is required within 131 days after contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with RP001, non-accepted supplies must have government identification removed per RQ011, and inspection and acceptance will occur at origin under RQ009. The item contains technical data subject to export controls under ITAR or EAR, requiring authorization before disclosure or transfer to foreign persons, regardless of location. DFARS 252.225-7048 applies, and only DLA contractors with approved JCP certification, completed training on handling export-controlled data, and formal DLA approval may access such data. Covered defense information is protected under RD002.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

SCALE, WEIGHING

Solicitation # SPE4A6-26-T-09RE

This contract solicitation, issued by the Defense Logistics Agency under solicitation number SPE4A6-26-T-09RE, seeks the procurement of a single unit of a commercial off-the-shelf scale and weighing device identified by NSN 6670-01-657-2981 for delivery to U.S. Navy vessels at FPO addresses, including USS ESSEX LHD 2 and USS BOXER LHD 4. The delivery must be completed within 20 days of award, with FOB destination terms placing full transportation responsibility and risk on the contractor until the item reaches the designated military destination. All packaging and preservation must strictly comply with MIL-STD-2073-1E, including cleaning and drying only with no chemical preservation materials, and palletization must meet DLA’s RP001 packaging requirements. Marking and labeling are required to adhere to MIL-STD-129 for shipment and storage containers, with no special markings designated, and the use of mercury or mercury compounds in any aspect of preservation, packaging, or marking is explicitly prohibited. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances expected in the sample lot unless otherwise specified, and unspeciﬁed attributes are treated as major. The item is classified as a COTS product, and the contractor must comply with all applicable DoD and FAR requirements, including electronic submission of invoices via WAWF, adherence to transportation protocols prohibiting parcel post, and use of traceable shipping methods. The contract incorporates a wide range of federal acquisition regulations including far clauses on inspection, changes, subcontracting, employment equity, trafficking in persons, sustainable products, and cybersecurity safeguards, as well as DFARS clauses addressing safeguarding defense information, prohibited materials like hexavalent chromium, hazard communication, and maritime shipping restrictions. Offerors must hold a valid UEI and CAGE code, represent their small business status and socioeconomic designations where applicable, and certify compliance with anti-trafficking and employment verification requirements. Proposals must be submitted electronically through the DLA Internet Bid Board System by the August 3, 2026 deadline, with no physical submissions accepted and no pricing provided in the solicitation, implying award will be based on evaluation of compliance, capability, and past performance under a fixed-price mechanism.

ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

CABLE, SPECIAL PURPO

Solicitation # SPE7M1-26-T-247E

The contract pertains to the procurement of five units of a special purpose cable identified by NSN 6145-01-719-5665, with a delivery requirement of 20 days after contract award. All technical and quality specifications referenced in the solicitation are governed by the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. The offeror must provide a complete data package including details for both the approved and alternate part, and no government identification may be removed from non-accepted supplies. The solicitation number is SPE7M1-26-T-247E, posted on August 3, 2026, with responses due by August 14, 2026. The purchase request number is 7017681990, and the place of performance is San Diego, CA, 92154. The contracting agency is the Maritime Supply Chain under the Department of Defense, with Alisha Blanton listed as the primary point of contact, reachable via email and phone. The NAICS code is 332216, indicating the industry classification for the procurement.

MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Solicitation # Z4918

The contract requires the procurement of titanium step-drill bits with a maximum hole diameter of 7/8 inch, featuring a titanium-nitride coating, self-starting tip, and double-sided cutting edges for enhanced performance and durability. The bits must have a 3/8-inch shank and be sourced from approved manufacturers only, including NORSEMAN model 45721, VERMONT model 13377, HILTI model 284645, and VIKING model P69150. The solicitation is issued by the Nashville Electric Service under solicitation number Z4918, with a posted date of August 3, 2026, and a response deadline of August 10, 2026, at 7:00 PM. The place of performance is in Nashville, Tennessee, and the contract is classified under a state, local, or educational agency type. All bids must be submitted through the official vendor portal, and inquiries should be directed to Alan Martinez, the primary procurement contact, via email at amartinez@nespower.com or phone at 615-747-3720.

Nashville Electric Service

POSTED

DEADLINE

Supply of Diesel Injection Tool Kit (NSN: 5180017111084)The contract requires the supply and delivery of one diesel injection tool kit identified by NSN 5180017111084, must adhere strictly to all military packaging, labeling, and barcode requirements to ensure compatibility with defense logistics systems. The item is to be shipped FOB origin to the designated delivery point at DLA Tracy, California, with final inspection to be conducted upon arrival at the destination to verify compliance with specifications and readiness for military use. The solicitation is classified as a subcontract under NAICS code 332216, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 10, 2026, and a posting date of August 2, 2026. The place of performance is confirmed as Tracy, CA, with a ZIP code of 95304-5000, and while no point of contact is listed, the official portal for further details is accessible via the provided DIBBS link.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

SEAR WASHER COMPRESSIO

Solicitation # SPE4A6-26-T-11FM

The contract pertains to the procurement of six Sear Washer Compression Tools identified by NSN 5120-01-592-4385 and part number 465-0768, sourced from Alliant Techsystems Operations LLC and Northrop Grumman Systems Corp. Delivery is due within 260 days from contract award, with shipment FOB origin and zero variance allowed in quantity. Inspection and acceptance occur at the manufacturer’s origin, and the items are designated as critical application items requiring strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. Packaging must comply with ASTM D3951 unless superseded by DLA requirements, and all units must be marked and labeled per MIL-STD-129 with palletization following RP001 guidelines. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Measuring and test equipment must be calibrated and documented, and the item does not have a shelf life. No Item Unique Identification is required per customer request. The delivery destination is DLA Distribution at the New Cumberland facility in Pennsylvania, and all transportation details are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 2, 2026, with responses due by August 10, 2026, under contract number SPE4A6-26-T-11FM.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

WRENCH, SPANNER

Solicitation # SPE4A6-26-T-11JB

The contract solicitation SPE4A6-26-T-11JB is for the procurement of one unit of NSN 5120017377422, a wrench and spanner, at a fixed unit price of $1.00, resulting in a total contract value of $1.00. Delivery is required FOB origin within 10 days of order placement, with the physical delivery point being Al Dhafra Air Base, United Arab Emirates, while the administrative parcel post address is in Tampa, Florida. The item must be delivered by August 16, 2026, and inspection and acceptance occur exclusively at the destination, despite FOB origin terms. Packaging and marking must comply with ASTM D3951, but are subject to the higher-priority DLA Master List of Technical and Quality Requirements, with all packaging and labeling strictly adhering to MIL-STD-129 including 2D Data Matrix barcodes, and palletization governed by RP001. Sampling for quality assurance will follow MIL-STD-1916 or ASQ H1331 Table 1 using a zero-conformance acceptance criterion unless otherwise stated, with critical, major, and minor attributes assigned AQL levels of 0.1, 1.0, and 4.0 respectively. The contract mandates electronic invoicing via WAWF and compliance with multiple regulatory clauses including employment eligibility verification, trafficking in persons, sustainable products, hazardous material safety, cybersecurity safeguards per NIST SP 800-171 and DFARS 252.204-7012, prohibitions on hexavalent chromium and covered defense telecommunications equipment, and restrictions on arbitration agreements. Offerors must be registered in SAM with a valid UEI and CAGE code, and must represent their small business status and socioeconomic certifications where applicable. All contractual provisions, including inspection, delivery, and compliance requirements, are binding, with the government retaining full authority to inspect and reject nonconforming items. The solicitation does not specify the award basis but context strongly suggests an LPTA approach due to the minimal value, fixed pricing, and zero-tolerance for defects. No options, extensions, or additional line items are included, and payment routing is tied to the resulting award’s DoDAAC.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

INSTALLATION TOOL, B

Solicitation # SPE4A6-26-T-11GK

The contract calls for the delivery of 30 Installation Tool, Bearing Staking units under solicitation SPE4A6-26-T-11GK, with a delivery deadline of 92 days after order. It is a total small business set-aside under NAICS code 332216, administered by the Department of Defense’s ASC Commodities Division. The item is identified by NSN 5120-01-629-3748 and is subject to strict technical and quality requirements derived from the DLA Master List, including packaging standards, removal of government identification from non-accepted supplies, and physical marking of bare items. Sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. Item Unique Identification is not required per customer request, though DFARS 252.211-7003(c)(1)(i) remains applicable. The contractor must comply with CMMC Level 2 requirements as a certified third-party assessment organization, maintain ISO 9001:2015 quality systems, and ensure all measuring and test equipment is calibrated and controlled. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons and requiring prior authorization from the Department of State or Commerce. Access to controlled data is limited to contractors with approved US/Canada JCP certification, completed DOD export training, and DLA authorization. The prime point of contact is Keasia Granderson, and performance is to occur in New Cumberland, Pennsylvania.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

TOOL KIT, DIESEL INJ

Solicitation # SPE4A7-26-T-605R

The contract specifies the procurement of a Diesel Injector Tool Kit under solicitation SPE4A7-26-T-605R, with a single unit of issue (KT) totaling one kit, to be delivered within 235 days to the designated receiving warehouse in Tracy, California. Delivery is FOB origin, with no variance allowed in quantity, and both inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and container use, with marking adhering strictly to MIL-STD-129 and no special marking required. Physical identification of the bare items must follow RQ017 requirements, and all packaging must meet DLA’s standardized procurement guidelines. The tool kit is identified by NSN 5180-01-711-1084 and equivalent part numbers from approved suppliers, including Polaris Sales Inc and Bosch Automotive Service Solutions Inc. Quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are classified with verification levels or AQLs based on criticality, with unspecified attributes treated as major. Sampling method is at the manufacturer's option unless contract stipulations dictate otherwise. The contract incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List, controlling revisions based on solicitation or award dates. The solicitation was posted August 2, 2026, with responses due by August 10, 2026, under NAICS code 332216 for the Department of Defense, and the primary point of contact is Isaiah Still. Transport and freight instructions reference DLAD procedural notes C19 and C20, and the unit of issue aligns with DoD authorized standards. The original required delivery date is April 3, 2027.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

PIN STRAIGHTENER, EL

Solicitation # SPE4A5-26-T-319J

The contract specifies the procurement of two electrical pin straighteners identified by part number C119040-1 and NSN 5120-01-172-4759, with delivery required within 20 days under solicitation SPE4A5-26-T-319J. The items must be manufactured and packaged in full compliance with DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and must be marked and labeled according to MIL-STD-129. Packaging and palletization must adhere to DLA Packaging Requirements for Procurement, with inspection and acceptance occurring at the destination point, Hill AFB, Utah. No unit identification marking is required under DFARS 252.211-7003(c)(1)(i), though physical identification of the bare item is mandated. Sampling for quality control must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes must be verified at designated levels or AQLs. Cybersecurity compliance requires CMMC Level 2 self-assessment, and the supplier must handle covered defense information in accordance with applicable directives. The delivery is FOB origin, with zero tolerance for quantity variance, and shipment must be sent via the fastest traceable means—parcel post is prohibited. The contract includes specific freight and parcel post addresses, along with government tracking codes, project identifiers, and required delivery date of July 24, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

INSERTER, BEARING AN

Solicitation # SPE4A0-26-T-3969

The contract calls for the procurement of one unit each of an inserter bearing with NSN 5120015211302 under solicitation SPE4A0-26-T-3969, with a total contract value of $2.00 across two identical line items. Delivery is required within five days of order receipt, with FOB Origin terms meaning title transfers at the contractor’s facility, though inspection and acceptance occur at the destination in Virginia Beach, VA. Strict compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking is mandatory, including use of a fiberboard box with moisture-resistant protection, glassine and laminated kraft cushioning, and no special markings. Palletization must adhere to DLA’s RP001 requirements, and shipment must be sent via traceable freight services—parcel post is prohibited. Sampling and quality assurance follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required for acceptance unless otherwise specified, with verification levels and AQLs tied to attribute classifications. The contractor must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers and implement configuration change management via Engineering Change Proposals. The contract incorporates critical FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility, sustainable products, hazardous material identification, cybersecurity safeguarding, NIST SP 800-171 compliance, subcontracting for commercial items, and reporting of cyber incidents; it also mandates adherence to the Unique Entity Identifier and CAGE code requirements as well as socioeconomic status representations. All invoicing must be processed electronically through Wide Area WorkFlow, and the contractor is subject to strict data handling, whistleblower, and former official compensation rules. Any deviation from specified standards requires formal waiver approval, and the Contracting Officer’s representative contact is Danita Davis at DLA Aviation.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

PLIERS, RETAINING RI

Solicitation # SPE4A6-26-T-09FQ

The contract is for the procurement of seven retaining pliers, identified by NSN 5120-01-442-8063, under solicitation SPE4A6-26-T-09FQ, with a firm delivery requirement of 20 days after award to Joint Base Pearl Harbor, Hawaii. The item is subject to multiple stringent technical, quality, and compliance requirements defined by the DLA Master List of Technical and Quality Requirements, which must be adhered to, with the applicable revision determined by the solicitation or award date. Packaging must comply with MIL-STD-2073-1E using Unit packaging code U and Intermediate container code E5, with dry preservation method 10 and dry storage condition CLNG/DRY:1, and marking must follow MIL-STD-129 including bare item marking per RQ017; Item Unique Identification is not required. The contract imposes export control obligations under RQ032 and DFARS 252.225-7048, restricting technical data subject to ITAR or EAR, requiring contractors to hold JCP certification, complete DLA export training, and receive approval for access. The contractor must comply with cybersecurity safeguards under 252.204-7012, NIST SP 800-171 requirements under 252.240-7997, and prohibitions on covered telecommunications equipment. Hazardous materials must be labeled per OSHA’s Hazard Communication Standard with SDS submissions required prior to award, and transportation is FOB Origin to a designated delivery location in Ewa Beach, Hawaii. Payment must be processed exclusively through Wide Area WorkFlow, and compliance with affirmative representations regarding small business status, UEI, and CAGE codes is mandatory. All contractual obligations are governed by numerous FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment verification, sustainable products, subcontracting, and prohibition of hexavalent chromium and toxic materials. Inspection and acceptance occur at destination with strict sampling standards based on MIL-STD-1916 and zero non-conformances required for critical and major attributes. No contract value is provided as pricing data is omitted, and the acquisition qualifies as a simplified purchase with no set-asides specified, though socioeconomic program eligibility remains a consideration for award.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

Supply of CUMMINS FF63041NN Fuel FiltersThe contract requires the procurement and delivery of 42 units of the OEM-specified FLEET FF63041NN fuel filter, which is equivalent to the CUMMINS FF63041NN model, for use exclusively in Freightliner vehicles manufactured from 2022 to the present. No installation, maintenance, or additional services are included in the scope of work; the deliverable is limited to the physical supply of the filters. The solicitation is classified as a subcontract under NAICS code 423120, indicating a focus on wholesale trade of motor vehicle parts and supplies. The contract was posted by Nashville Electric Service, operating under the Tennessee agency designation, with the place of performance listed as Nashville. Bidders must submit responses by August 10, 2026, at 7:00 PM, following the initial posting date of August 3, 2026. All submissions must be made through the designated vendor portal at the provided URL.

Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

DEADLINE

Supply of HOMAC UT3 Ratchet-Type Crimping Tools

Cutlery and Flatware (except Precious) Manufacturing

POSTED

DEADLINE

Quality Inspection and Compliance Verification (Pre-Delivery)Nashville Electric Service is seeking qualified third-party inspectors to conduct pre-delivery quality verification of steel poles at manufacturer facilities, ensuring compliance with ASTM A123 for galvanized coatings and NES LSK-1230 specifications. The inspection scope includes detailed assessment of zinc coating thickness, dimensional precision, and overall fabrication quality to confirm adherence to technical standards before product shipment. This subcontract opportunity is open for response until August 14, 2026, with work expected to occur at manufacturing sites nationwide, though the agency is based in Nashville, Tennessee. Interested parties must respond by the stated deadline to be considered for this procurement under NAICS code 541330, which pertains to specialized technical services for engineering and inspection activities.

Engineering Services

POSTED

DEADLINE

Specialized Delivery and Logistics for Oversized Steel PolesThe contract requires the specialized transportation of 100-foot steel utility poles to Nashville Electric Service facilities under strict logistical constraints. Deliveries are prohibited on Mondays, and all two-piece poles must be transported together on the same truck to ensure compatibility and safety. Mixed loads are strictly forbidden unless prior written approval is obtained, emphasizing the need for dedicated, single-cargo shipments. The poles must be handled with a secure, multi-layered loading system to prevent damage during transit, reflecting the sensitivity and scale of the oversized equipment involved. All deliveries must be performed to meet the exacting standards of Nashville Electric Service, with performance centered exclusively in Nashville. The contract is classified as a subcontract under NAICS code 484220, indicating a focus on specialized freight transportation. Proposals must be submitted by the deadline of August 14, 2026, and interested parties should access the full solicitation details through the official vendor portal. Compliance with all delivery protocols, timing restrictions, and handling requirements is mandatory for award consideration.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Manufacture of 100-Foot Steel Utility Poles (Class H4 Equivalent)The contract requires the fabrication of 100-foot steel utility poles meeting a minimum structural capacity of 486 ft-kips and compliant with NES Specification LSK-1230. Each pole must be hot-dip galvanized in accordance with ASTM A123 to ensure corrosion resistance and long-term durability. The poles may be manufactured in no more than two sections, and if fabricated as a two-piece assembly, both sections must be delivered together as a single unit to ensure proper installation and structural integrity. This is a subcontract opportunity under NAICS code 332312, targeted for suppliers capable of producing Class H4 equivalent utility poles. The solicitation was posted on August 3, 2026, with a firm response deadline of August 14, 2026, at 7:00 PM. The project is managed by Nashville Electric Service in Tennessee, with performance required in Nashville. Interested parties must submit responses through the vendor portal at the designated UI link.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Supply of Packing Lower Kelly Bar 3" I.D. for Texoma 330-12

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Supply of Conduit Ventilating Cable Supports (TERMINATOR 6 4/0–750–25KV 3H)

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Delivery and Logistics for Utility Pole ShipmentsNashville Electric Service is seeking qualified contractors to transport and deliver 60-foot steel utility poles to designated sites across Nashville, Tennessee, with exacting requirements for delivery scheduling, load segregation, and operational coordination. The contract mandates strict compliance with pre-established delivery windows, proper separation of loads to ensure site-specific allocation, and seamless communication with site personnel to avoid delays or misplacements. All shipments must be handled with precision to maintain integrity of the poles and meet the operational needs of NES infrastructure projects. The solicitation is classified as a subcontract under NAICS code 484220, which pertains to truck transportation of heavy and bulky goods. The opportunity was posted on August 3, 2026, with proposals due by August 14, 2026, at 7:00 PM Eastern Time. While no set-aside provisions are specified, the work is focused exclusively on delivery services within the Nashville area, requiring local logistics expertise and reliable equipment capable of handling oversized utility poles. Interested parties must access the vendor portal via the provided link to submit bids and review full technical specifications.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Manufacturing of Self-Weathering Steel Utility PolesNashville Electric Service is soliciting bids for the manufacturing of sixty-foot self-weathering steel utility poles具备 H5 mechanical capacity and a CORROCOTE brown finish, ensuring durability and corrosion resistance in outdoor environments. The poles must fully comply with NES LSK-1212 specifications and relevant ASTM standards to meet operational and safety requirements for electrical distribution infrastructure. This subcontract opportunity is open to qualified manufacturers with the capability to produce poles that meet exacting technical and finish criteria, with responses due by August 14, 2026. The place of performance is centered in Nashville, Tennessee, and the solicitation is accessible through the vendor portal at the provided URL. Contractors must demonstrate experience in steel pole fabrication and adherence to industry-certified standards to be considered eligible.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Terminator Cable

Solicitation # Z4923

The contract specifies the procurement of a 4/0 25KV URD terminator cable designed for terminating jacketed concentric neutral aluminum or copper primary cables with an insulation diameter ranging from .72 to 1.29 inches. The terminator must be constructed of cold shrink silicone rubber with an integrated silicone sealing compound and sealing mastic to ensure a durable, weatherproof connection. It must be supplied with a stem connector as a standard component. Only two approved manufacturers and part numbers are accepted: TE CONNECTIVITY TO-283J-NES and 3M INDUS7653-S-4-4/0. The solicitation is issued by Nashville Electric Service under reference number Z4923, with a response deadline of August 10, 2026 at 7:00 PM. The contract is targeted toward state, local, and education entities and will be performed in Nashville, Tennessee. Procurement inquiries should be directed to Jay Thompson at the provided phone number and email address.

Other Communication and Energy Wire Manufacturing

POSTED

DEADLINE

Solicitation # Z4917

The contract requests a ratchet-type crimping tool specifically designed for 1/2 inch to 5/8 inch sleeves, with a safety feature that prevents the handle from releasing until full compression is achieved, ensuring consistent and safe crimping performance. Only the approved manufacturer part number HOMACUT3 is acceptable, and no alternatives will be considered. The solicitation, identified by number Z4917, was posted on August 3, 2026, with a response deadline of August 10, 2026, at 7:00 PM. This procurement is issued by Nashville Electric Service under the Tennessee state agency classification and is intended for performance in Nashville, Tennessee. The primary point of contact for procurement inquiries is Alan Martinez, who can be reached via email at amartinez@nespower.com or by phone at 615-747-3720. All bids must be submitted through the official vendor portal linked at https://vendor.nespower.com/?bid=Z4917.

POSTED

DEADLINE

Solicitation # Z4914

The contract solicits packing components for a lower kelly bar with a 3-inch internal diameter, specifically designed for use with the Texoma 330-12 model, with approved manufacturers and part numbers limited to REEDRILL0010154 and H&TH10154T. The solicitation, numbered Z4914, is issued by Nashville Electric Service under the Tennessee state agency and is classified as a state, local, or educational entity procurement. Bidders must submit responses by August 10, 2026, at 7:00 PM Eastern Time, with the solicitation posted on August 3, 2026. The place of performance is in Nashville, Tennessee, and all communications and submissions must align with the specifications provided in the contract. Alan Martinez, the designated Procurement Contact, serves as the primary point of contact with email amartinez@nespower.com and phone number 615-747-3720, and all relevant information and submission portals are accessible through the official vendor link provided.

POSTED

DEADLINE