Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Towed Body & Acoustic Projector Fabrication

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Naval Undersea Warfare Center involves the manufacture of underwater towed acoustic projectors and structural housings for torpedo countermeasure projects. The scope of work includes the fabrication of the Towed Body, specifically the nose cone, acoustic section, electrical section, and tail cone assemblies. These components must be constructed using pressure-resistant housings, acoustic transducer materials, and underwater-rated seals to ensure operational integrity. The contractor is required to adhere to BTP Level 3 TDP and strict underwater pressure specifications to deliver a completed Towed Body assembly. This project falls under NAICS code 336611 and is performed in Chesapeake, supporting prime contractors on NUWC Division Keyport initiatives.

General Info

Subcontract for manufacturing underwater towed acoustic projectors and structural housings for NUWC projects.

Agency

Department Of Defense → Naval Undersea Warfare CenterView Agency

NAICS

336611 - Ship Building and RepairingView NAICS

Place of Performance

Chesapeake, VA, USA

Set-Aside

NONE

Documents

This scope was carved out of N0025325R7004.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

AN/SLQ-25E “NIXIE” Follow-on Contract - Notice

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 21

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Naval Undersea Warfare Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Naval Undersea Warfare Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures underwater towed acoustic projectors and structural housings for prime contractors on NUWC Division Keyport torpedo countermeasure projects. Fabricates the Towed Body, including Nose Cone, Acoustic Section, Electrical Section, and Tail Cone assemblies. Utilizes pressure-resistant housings, acoustic transducer materials, and underwater-rated seals. Must meet BTP Level 3 TDP and underwater pressure specifications. Delivers completed Towed Body assembly.

Similar Contracts

Same NAICS industry code

SWITCHBOARD, ALARM, SHIP

Solicitation # SPE4A6-26-T-33UB

ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE7M4-26-T-425C

FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

PARTS KIT, STOP-CHECK V

Solicitation # SPE7M0-26-T-092B

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 23 hours ago

DEADLINE

LOCKER, BERTH, CREW

Solicitation # SPE7M4-26-T-428Q

FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

HEAD AND FOOT BOARD CR

Solicitation # SPE7M4-26-T-426N

FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

SWITCHBOARD, ALARM, SHIP

Solicitation # SPE4A6-26-T-33PK

ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

INDICATOR, LIQUID QUANT

Solicitation # SPE4A5-26-T-456W

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE7M4-27-Q-0001

Solicitation SPE7M4-27-Q-0001, issued by DLA Land and Maritime under Special Emergency Procurement Authority, seeks quotes for the procurement of 17 marine windows (NSN 2090-20-002-8864). This critical application item is categorized under NAICS 336611, with a required delivery date of 560 days after the order is placed. The contract is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Diego. Award will be based on the best value to the government, evaluating price, delivery timelines, and past performance. The contract mandates strict adherence to several technical and environmental standards. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA requirement RP001. Environmental restrictions prohibit the intentional use of mercury and Class I ozone-depleting substances without written approval. Additionally, the contractor must meet CMMC Level 2 self-assessment requirements and comply with covered defense information protocols. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

FLUID HANDLING DIVISION

POSTED

about 23 hours ago

DEADLINE

SUNGLASSES, AIRCREW

Solicitation # SPE2DS-26-T-440P

Solicitation SPE2DS-26-T-440P is a request for quotations issued by the DLA Troop Support Medical Supply Chain for 50 units of USAF aircrew non-prescription sunglasses, identified by NSN 6540-01-532-5184. The required sunglasses must be medium size with a monel-nickel electro-phoretic plated ebony frame, 140mm bayonet temples, a 55mm eye size, and an 18mm bridge with silicone nose pads. The lenses must be hard-coated polycarbonate neutral density gray with 15 percent light transmission, and polarization is not authorized. Each unit must include a soft case with a belt loop. Delivery is required within 20 days after receipt of order, with inspection and acceptance occurring at the destination. The procurement is governed by NAICS code 336611 and requires compliance with several federal standards, including the Berry Amendment, the Buy American Act, and DFARS 252.204-7012 for safeguarding covered defense information. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and Medical Marking Standard No. 1, with specific adherence to Special Packaging Instructions MPWN00001. All payment requests must be processed electronically through the Wide Area WorkFlow system. Offerors must submit their quotes via the DIBBS portal and are prohibited from using additive manufacturing processes for the supplied items.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 23 hours ago

DEADLINE

PLIERS, OPTICIANS'

Solicitation # SPE2DS-26-T-455Y

Solicitation SPE2DS-26-T-455Y is a fixed-price request for quotations issued by the DLA Troop Support Medical Supply Chain for one unit of 5-inch endpiece gripping opticians pliers, identified by NSN 6540-00-2998409. The tool must be suitable for angling temples on plastic frames while protecting the hinge and shield. The required delivery date is September 22, 2026, with a delivery window of five days after the order. Delivery, inspection, and acceptance are all set as FOB Destination, with the final shipment destined for the USS John C Stennis (CVN 74). The contract mandates strict adherence to packaging and marking standards. Items must be packaged according to ASTM D3951 and RP001 DLA Packaging Requirements, though the DLA Master List of Technical and Quality Requirements takes precedence. Marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129 for material marking. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. The solicitation incorporates various FAR and DFARS clauses, including those regarding the Berry Amendment, Buy American Act, and the safeguarding of covered defense information. All quotes must be submitted via the DLA Internet Bid Board System.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 23 hours ago

DEADLINE

LENS, DIPLOPIA TEST

Solicitation # SPE2DS-26-T-455Z

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE7M2-26-U-0503

NUCLEAR REACTOR PROGRAM

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Defense → Naval Undersea Warfare Center

Same awarding agency

Fiber Optic Tow Cable AssemblyThis subcontract involves the supply and assembly of specialized fiber optic tow cable assemblies for prime contractors supporting Naval Undersea Warfare Center Division Keyport torpedo countermeasure projects. The manufacturer is responsible for producing cables that integrate fiber optic cabling, armored sheathing, and waterproof connectors to maintain signal integrity and structural durability during underwater deployment. The project requires strict adherence to BTP Level 3 TDP and established fiber optic performance standards. Performance will take place in Chesapeake, and the final deliverable is the completed Tow Cable Assembly under NAICS code 335921.

Fiber Optic Cable Manufacturing

POSTED

DEADLINE

Winch & Deck Handling Equipment ManufacturingThis subcontract involves the manufacturing of mechanical deployment systems for prime contractors supporting Naval Undersea Warfare Center Division Keyport torpedo countermeasure projects. The scope of work includes the fabrication and assembly of the Winch Assembly, Top Hat, Slip Ring, and associated Deck Handling Equipment, utilizing heavy-duty machining and cable winding mechanisms. All production must strictly adhere to BTP Level 3 TDP and Factory Acceptance Test protocols to ensure technical compliance. The final deliverable consists of fully assembled winch and deck handling hardware, with performance taking place in Chesapeake.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Electronics Console & Control Unit FabricationThis subcontract involves the fabrication and assembly of electronics housing and internal modules for torpedo countermeasure projects under the Naval Undersea Warfare Center Division Keyport. The scope of work focuses on build-to-print manufacturing for the Common Control Unit and Electronics Console, encompassing the production of signal generator drawers, HVDC supplies, dry amplifiers, fan trays, pedestals, and frames. The project requires expertise in precision sheet metal fabrication and electronic rack integration to deliver completed assemblies. To be eligible, the provider must maintain compliance with NIST SP 800-171 and DLA JCP standards. Performance of the contract is centered in Chesapeake, falling under NAICS code 334413.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

Systems Engineering & Technical (E&T) ServicesThis subcontract for Systems Engineering and Technical Services supports the Naval Undersea Warfare Center Division Keyport on torpedo countermeasure projects. The scope of work involves providing technical documentation, safety planning, and quality validation for prime contractors, specifically focusing on the development and execution of Factory Acceptance Test plans, System Safety Program Plans, Life Cycle Sustainment Plans, and DMSMS plans. The contractor is responsible for delivering technical design packages and comprehensive reports while utilizing engineering analysis software. Strict adherence to NIST SP 800-171 and NISPOM security standards is required. The performance of these services is centered in Chesapeake, falling under NAICS code 541330.

Engineering Services

POSTED

DEADLINE

AN/SLQ-25E “NIXIE” Follow-on Contract - Notice

Solicitation # N0025325R7004

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

DMISA Ring Test and Inspection ServicesThis subcontract for the Naval Undersea Warfare Center involves the technical testing and inspection of refurbished DMISA rings for prime contractors on NAVSEA projects. The selected provider will be responsible for identifying items by NSN and serial number, executing specific test parameters, and verifying performance requirements through the use of environmental chambers and precision measurement equipment. All results must be formally signed and authenticated, culminating in the delivery of a comprehensive Test/Inspection Report as specified in CDRL A001. The project is based in Keyport, Washington, and falls under NAICS code 541380. Due to the nature of data transmission requirements, the contractor must maintain CMMC Level 2 certification. The solicitation was posted on September 18, 2026, with a response deadline of October 19, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Specialized Magnet Supply for DMISA RingsThis subcontract through the Naval Undersea Warfare Center involves the supply of high-precision magnets used in NAVSEA torque motor magnetic field ring assemblies. The contractor is responsible for manufacturing magnets that meet strict technical specifications for both Azimuth and Elevation rings using high-grade materials. All deliverables must be tracked by lot and serial number to ensure quality and traceability. The contract requires full certification of Trade Agreements Act compliance, ensuring materials originate from the United States or a designated country. Performance for this requirement is based in Keyport, Washington, under NAICS code 327390. The response deadline for this opportunity is October 19, 2026.

Other Concrete Product Manufacturing

POSTED

DEADLINE

DMISA Ring Refurbishment and Magnet InstallationThis subcontract for the Naval Undersea Warfare Center involves the refurbishment of torque motor magnetic field ring assemblies for NAVSEA projects. The scope of work includes removing existing magnets from government-furnished rings, cleaning and preparing surfaces, and installing new magnets into various plated steel and stainless steel azimuth and elevation ring configurations. Due to the precision required for magnet removal and installation, the use of specialized tools is mandatory. The project is based in Keyport, Washington, and requires strict adherence to CMMC Level 2 and NISPOM standards. The final deliverable consists of refurbished and repopulated DMISA ring assemblies. Interested parties must respond by October 19, 2026, under NAICS code 332710.

POSTED

DEADLINE

Refurbishment of Torque Motor Magnetic Field Ring Assemblies

Solicitation # N0025326R7006

Solicitation N0025326R7006, issued by the Naval Undersea Warfare Center Division Keyport, is an Indefinite-Delivery Indefinite-Quantity procurement for the refurbishment and repopulation of Torque Motor Magnetic Field Ring Assemblies (DMISA rings). The scope of work involves the depopulation of existing magnets and the installation of new magnets for four variations of rings: plated steel azimuth, stainless steel azimuth, plated steel elevation, and stainless steel elevation. The contractor is responsible for grinding items to meet final dimensions and performing all required tests and inspections in accordance with NAVSEA Drawings 7447999 Rev I and 7448000 Rev F. The government has established a maximum order quantity of 2,540 units, with specific delivery requirements of 180 calendar days after receipt of government furnished property. The contract will be awarded to a single offeror using the Lowest Price Technically Acceptable (LPTA) source selection process. To be considered, offerors must be rated acceptable in technical capability, quality management systems (ISO 9001:2015 or equivalent), risk management, and past performance. Key deliverables include a Test and Inspection Data Sheet (CDRL A001) with every delivery and adherence to strict packaging and marking standards, including magnetic content labeling and MIL-STD-130 unique identification. Access to controlled technical drawings requires validated JCP and CMMC certifications. Invoicing is managed through the Wide Area WorkFlow (WAWF) system, and inspection and acceptance are performed by the government at the destination in Keyport, Washington.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Building 514 Crane Rail Cross Bracing Installation

Solicitation # N0025326Q0008

The Naval Undersea Warfare Center Division Keyport is soliciting quotes for the installation of crane rail cross bracing at Building 514 in Keyport, Washington. This requirement, issued as RFQ N0025326Q0008, is a 100% small business set-aside under NAICS code 333923. The scope of work involves relocating high-pressure air and electrical lines, welding new gussets and plate stiffeners, installing bolted cross bracing and web stiffeners at six specific columns, and performing a crane rail survey. The contractor is also responsible for preparing, priming, and painting all exposed steel to match existing finishes. All work must comply with EM-385-1-1 safety standards, UFC 1-200-01 building codes, and NAVFAC P307 weight handling guidelines. The government will award the contract based on a Lowest Price Technically Acceptable (LPTA) source selection process. Technical evaluation focuses on the offeror's capability, requiring at least three years of experience in commercial or industrial applications, a certified Site Safety and Health Officer, and an acceptable past performance record. Safety risk is evaluated using a five-year history of OSHA DART and Total Recordable Case rates. Proposals must be submitted electronically and include a cover letter, SF 1442, and a letter of bondability. Bid bonds are required for proposals of $150,000 or more. Invoicing must be processed through the Wide Area Workflow (WAWF) system.

Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

DEADLINE

Hazardous/Industrial Waste Disposal ContractorThis subcontract opportunity is for a Hazardous and Industrial Waste Disposal Contractor to support prime contractors at the Naval Undersea Warfare Center Division facility in Keyport, Washington. The selected contractor will be responsible for the removal, collection, and legal disposal of degraded insulation and industrial waste from Building 98, ensuring all activities comply with federal, state, and local environmental regulations. Key deliverables include the provision of disposal manifests and certificates of destruction. The project is designated as a total Small Business Set Aside under NAICS code 562111. Qualified bidders must possess valid waste hauling and disposal permits to be eligible. The solicitation was posted on September 17, 2026, with a response deadline of September 24, 2026.

Solid Waste Collection

POSTED

DEADLINE

Specialized Cryogenic Insulation SupplierThis subcontract, designated as a total Small Business Set Aside, involves the supply of specialized cryogenic insulation materials for projects at the Naval Undersea Warfare Center Division Keyport facility. The supplier is responsible for providing three-inch thick urethane insulation, Mylar vapor barriers, white aluminum outer jackets, and all necessary mounting hardware. All materials must adhere to strict performance standards to effectively prevent frost and condensation on liquid nitrogen systems. The contractor is required to deliver all specified materials and hardware directly to the site or the prime contractor. This opportunity falls under NAICS code 326199 and is managed under the Department of Defense. The response deadline for this requirement is September 24, 2026.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS