Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

This Pre-Solicitation opportunity from Department Of Defense was posted on April 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

TR-317D and TR-353A Transducers and TR-353A Spare Parts Production

Closed
N66604-26-R-0004Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

General Info

Agency

Department Of Defense → Nuwc Division NewportView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

RI, USA

Set-Aside

NONE

Documents

(1)

DRAFT TR-317 and TR-353 Statement of Work Pre-Solicitation

PDFsow

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Sources Sought

Type Changed

Sources Sought → Presolicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nuwc Division Newport
Contacts1 person available
OfficeNEWPORT, RI, 02841-1703, USA
Organization / Agency
Department Of Defense → Nuwc Division Newport
View Agency Profile
Office AddressNEWPORT, RI, 02841-1703, USA

Full Description

Show more

This is a pre-solicitation notice for non-commercial items prepared in accordance with FAR 5.101 as supplemented with additional information included in this notice.


The Naval Undersea Warfare Center Division Newport (NUWCDIVNPT) has a requirement for a production contract for TR-317D and TR-353A Transducers and TR-353A Installation Kits, TR-353A Housings and TR-353A End Seals. Place of contract performance will be at the contractor’s facility. The work to be performed under the contract is to design, document, manufacture, test, package, and deliver up to 40 First Article TR-317D Transducers and up to 40 First Article TR-353A Transducers (if First Article not waived), and up to 25,000 production TR-317D Transducers and up to 5,500 production TR-353A Transducers which meet the performance requirements of the respective TR-317D and TR-353A Transducer Critical Item Performance Specification. The Government also has a requirement for the manufacture, test, package and delivery of up to 5,500 TR-353A Installation Kits, up to 5,000 TR-353A Housings, and up to 5,000 TR-353A End Seals which will be build-to-print items.


Award of a multiple award, firm-fixed-price, five-year indefinite delivery/indefinite quantity contract is anticipated.


This requirement will be solicited as unrestricted as concurred with by the NUWCDIVNPT Office of Small Business Programs. The North American Industry Classification System Code for this acquisition is 334511. The Small Business Size Standard is 1,350 employees.


A draft Statement of Work is included with this synopsis. The Applicable Documents will only be provided with the Request for Proposal (RFP) once posted, upon request. The Applicable Documents are Distro D and Export Controlled which means distribution is authorized only to the DoD and U.S. DoD contractors with a valid Joint Certification Program (JCP) certification. Only offerors with an active registration in JCP will be provided access to the Distro D and Export Controlled Applicable Document. Please visit http://www.dlis.dls.mil/jcp for further details on the program and registration.


Offerors are required to be registered in System for Award Management (SAM) at the time an offer is submitted in order to comply with the annual representations and certifications requirements. Instructions for registration are available at https://sam.gov/.


The anticipated release of RFP: N66604-26-R-0004 is expected to be in May 2026, with estimated award in December 2026. The anticipated source selection evaluation criteria will consider technical capability, past performance, and price. The specific evaluation criteria will be outlined in the RFP. The closing date for receipt of proposals will be established in the RFP.  All responsible sources may submit a proposal in response to the RFP, as appropriate, which will be considered by the agency.


Additional details will be released upon issuance of RFP N66604-26-R-0004. Please contact Keri Gunn at keri.l.gunn.civ@us.navy.mil, NUWCDIVNPT, with any questions regarding this pre-solicitation notice.

More opportunities from Department Of Defense → Nuwc Division Newport

Same awarding agency

NAICS: 236220
New
Federal
Construction - NUWCDIVNPT - Consolidated Secure Facility
Solicitation # N6660426R0163
The Naval Undersea Warfare Center Division Newport is soliciting proposals for the design and construction of the B162 Consolidated Secure Facility, a high-security project requiring full compliance with stringent federal and defense standards. The requirement is a 100% Small Business Set-Aside under NAICS code 236220, with a size standard of $45 million, and small businesses must perform at least 50% of the work. Proposals must be submitted electronically by the revised deadline of July 31, 2026, with formal response due by August 12, 2026. The contract is structured as a Firm Fixed Price arrangement, covering a single job and one lot for construction submittals, with performance to begin within 10 days of award and complete within 365 days. The facility will be constructed at Naval Station Newport, Rhode Island, and must meet rigorous security, acoustic, and physical standards to achieve Sensitive Compartmented Information Facility (SCIF) and Special Access Program Facility (SAPF) accreditation. Offerors must provide detailed technical narratives on SCIF/SAPF design, site security during construction, a Construction Security Plan, preliminary conceptual drawings, and a project schedule, all organized into specified volumes with strict formatting, page limits, and PDF searchability requirements. Contractors must be registered in SAM.gov and possess the necessary roles to request controlled attachments, including the Conceptual Layout Plan, Area Site Plan, and Site Utility Plan, which are critical to proposal development. The solicitation mandates that offerors hold a facility clearance and safeguarding clearance as specified in the DD Form 254 at time of submission and secure Top Secret/SCI clearances for designated personnel within ten days of performance commencement. Key personnel—including a Project Manager with 7 years of federal construction experience and 5 years on ICD/ICS 705 facilities, and a Superintendent with 10 years of experience—must be identified with resumes and cannot be substituted without government approval. Compliance with CMMC for handling Controlled Unclassified Information, adherence to NAVSEA packaging prohibitions, use of Wide Area Workflow for all invoicing and payment submissions, and full disclosure of organizational conflicts of interest with mitigation plans are mandatory. The evaluation process uses a tradeoff analysis with a pass/fail gate for technical approach: proposals must achieve at least an “Acceptable” rating under Factor I to be eligible, and award will be based on best value, giving primary
Commercial and Institutional Building Construction

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 332313
New
Federal
Closure Protective Covers (CPCs)
Solicitation # N6660426Q0288
The Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) is soliciting bids for the procurement of Closure Protective Covers (CPCs) under solicitation N66604-26-Q-0288. This is a Firm Fixed Price contract with a maximum funding limitation of $197,000.00. While originally a small business set-aside, Amendment 0002 changed the status to full and open competition. The requirement is divided into three CLINs: a first article unit, production units, and the delivery of data per the Contract Data Requirements List. Award will be made on a Lowest Price Technically Acceptable (LPTA) basis to the vendor proposing the greatest quantity of production units within the $197,000.00 budget. To be considered technically acceptable, offerors must provide completed pricing tables and demonstrate cybersecurity compliance, including an active CMMC Level 2 (Self) or higher assessment and a NIST SP 800-171 DoD Assessment score posted in the Supplier Performance Risk System (SPRS). Access to export-controlled government drawings requires a valid Joint Certification Program (JCP) certification. Deliverables must be manufactured in accordance with drawing JCM-14865-001 and include a comprehensive Certificate of Compliance (CoC) documenting material validations and test results for all components. Shipping is FOB Destination to Newport, RI, and the government's preferred payment method is via Government Purchase Card.
Plate Work Manufacturing

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 541380
New
Federal
Aeration Blower and Silencer Vibration and Shock Fixture Fabrication
Solicitation # N6660426Q0459
Solicitation N66604-26-Q-0459 is a firm-fixed-price request for quotes from the Naval Undersea Warfare Center Division, Newport, for the fabrication and assembly of two specific test fixtures: one CHT Aeration Blower Fixture Assembly and one Discharge Silencer Fixture Assembly. The contractor is responsible for procuring materials, including copper-nickel piping, and performing welding and assembly to replicate a shipboard environment in accordance with Mil-DTL-901E and Mil-Std-167A. The work will be performed at the contractor's facility and at NUWCDIVNPT, where the contractor must provide on-site technical personnel to support government-executed fitment evaluations. Key deliverables include a Fabrication and Inspection Report due within five business days of assembly completion and a final Summary Report detailing fabrication and fitment testing. The desired delivery date for the assemblies is January 15, 2027, with delivery terms set as FOB Destination, Newport, RI. Award is based on the lowest price technically acceptable, with the government reviewing past performance via the Supplier Performance Risk System. Offerors must be registered in SAM, provide a CAGE code for drawing access, and achieve CMMC Level 2 (Self) certification prior to award. Quotes are due by September 11, 2026, and must include all shipping costs within the unit price.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS