trailer and cart

Solicitation N00421-09-T-0047 is issued as a request for quote (RFQ). This action is set aside for small business. The Government intends to purchase on a firm fixed-price basis and to solicit and negotiate the proposed purchase order for the part numbers listed below, under the authority of FAR Part 6.This is a description of a trailer and cart: 102. 3-Bay 19" (EIA-310-D) Aluminum Bolt-Together Assembly. Unit is 34.00" D X 69" W (29U) X 34.00" D X 56.667" H Not counting the Lifting Eyebolts, Material .125" Thk 5052-H32 Formed Aluminum Frames, (3) Seam Welded Enclosures,Solid Tops, non-removable, Solid non-removable Side Panels (open between bays), (3) Full Height Surface Mount Front Doors with Southco 3-Point (Multi-Point) (non-locking) Compression Latches. Doors include (3) Southco Lift-Off Compression Hinges,(3) Surface Mount Rear Doors Same as Front Doors, Each Frame to have Full Height Vertical Copper Bus Bar, 1.00" X .25" X 29U, Isolated,Zinc Plate Each Frame to have a 10-32 X 1.00" SS Ground Stud bolted to the Base,Each Frame to have 2 pairs of vertical Unistrut (full height) for mounting Shelf Angles, Each Frame to have 8 Pairs of 3.00" X 3.00" X 20.00" Shelf Angles mounted at random, Each Frame to have (1) P312-15-15-1, mounted on vertical bar (124142-203), Each Frame to have (2) Pairs of 10-32 Tapped Combo Rails Front and Rear, Each Frame to have (4) 2000 LB rated Eyebolts in the top corners of the assembly (4 Total) Each Eyebolt shall be mounted into 1.00" X 1.00" Aluminum Blocks welded into each top corner.,When 3-Bay is Bolted together it shall be mounted to (6) Barry Controls Cup Mount Shock Isolators on the bottom of a 3/16" aluminum plate bolted to the bottoms of the frames, The shock mounts will then attach to the forklift base, thru 1/8" thick tubing structure, Shock Mount P/N is C07-NC2090-T6 (Barry Controls), Horizontal Locking Bar from side to side with Padlock Hasps on one side there should be an extra set of mounts to store the bar when the doors are open,The 3-Bay Assembly is NEMA-4 Environmentally Sealed, Note: All Doors are hinged Left exept the right front. All Doors are Formed 2.00" Deep., Ship Loose: A (1) each 113341 1U High X 19" Rack Mounted Writing Shelf BLACK Formica Writing Surface Black Powder Coat, The 3-Bay Assembly is NEMA-4 Environmentally Sealed, Horizontal Locking Bar from side to side with Padlock Hasps on one side Isolators on the bottom of a 3/16" aluminum plate bolted to the bottoms of the frames The shock mounts will then attach to the forklift base, thru 1/8" thick tubing structure. top corner, When 3-Bay is Bolted together it shall be mounted to (6) Barry Controls Cup Mount Shock, Each Frame to have (1) P312-15-15-1, mounted on vertical bar (124142-203), Each Frame to have (4) 2000 LB rated Eyebolts in the top corners of the assembly (4 Total Each Eyebolt shall be mounted into 1.00" X 1.00" Aluminum Blocks welded into each, Each Frame to have 2 pairs of vertical Unistrut (full height) for mounting Shelf Angles, Each Frame to have 8 Pairs of 3.00" X 3.00" X 20.00" Shelf Angles mounted at random, Each Frame to have Full Height Vertical Copper Bus Bar, 1.00" X .25" X 29U, Isolated, Each Frame to have a 10-32 X 1.00" SS Ground Stud bolted to the Base, (3) Surface Mount Rear Doors Same as Front Doors, (3) Full Height Surface Mount Front Doors with Southco 3-Point (Multi-Point) (non-locking) Compression Latches. Doors include (3) Southco Lift-Off Compression Hinges, Solid Tops, non-removable, Solid non-removable Side Panels (open between bays), (3) Seam Welded Enclosures Cart Cabinet Assembly to include: 3-Bay 19" (EIA-310-D) Aluminum Bolt-Together Assembly. Unit is 34.00" D X 69" W (29U), FINISH, Polyurethane, Int'l Orange Text, 3-Bay Test Cart with Running Gear (TMATS) Revision "A", Material .125" Thk 5052-H32 Formed Aluminum Frames, Shelf,. (1) each 107015-5 3U High Storage Drawer X 16.00D X 19" Rack Mounted Black Powder Coat, (1) each 107015-7 4U High Storage Drawer X 16.00D X 19" Rack Mounted Black Powder Coat, (1) each 107015-10 6U High Storage Drawer X 16.00D X 19" Rack Mounted Black Powder Coat, (2) each 107075-1 3.50" High X 16.00D Drawer with BLACK lift-up writing surface Black Powder Coat, 3.0(Overall Width dimension does not include Tow Bar) Dimensions:Overall Height is 75.25, Depth is 40.00, Width is 94.00 (Long) (approx) Overall Height of Running Gear is 14.50", Width from outside rubber to rubber is 40.50, An Aluminum Storage Box (.090 thk) with a Hinged Door on top and Padlock Hasp., Dimensions 34.00w X 22.00h X 19.25d Mounted to rear of For Base Frame (see sketch below) Running Gear with Tow Bar and Emergency Brake on rear Wheels:Storage Box, Rear, (2) each. Tunnel Material 3.00 X 8.00 X.125 Thk CRS Fork Lift Base is designed to accommodate the Hadco Running Gear, The Fork Lift Base Section is 2.00" H X 94.00" W X 40.00" Deep, Base is equipped with 3.00" X 8.00" Heavy Duty Fork Lift Tunnels Front to Fork Lift Base is non-NEMA, Fork Base Section: Running Gear with Tow Bar. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is a request for competitive proposals. However, all proposals received by 12 March 2009 will be considered by the Government. Information received will normally be considered for the purpose of determining whether to conduct a competitive procurement. The Government will not pay for any information received. Facsimile proposals are acceptable. For information contact Francine Keys, Telephone +1 (555) 000-0000, FAX(301) 757-8959 or via e-mail: contact@example.gov