Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Trailer Component Supply – Axles, Suspension, and Braking Systems

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the supply of OEM-grade axles, leaf springs, hubs, drums, and braking components specifically designed for single and dual axle trailers, with all parts必须 meet stringent durability and load-rating specifications to ensure operational safety and performance under heavy-duty conditions. The scope encompasses components critical to trailer suspension and braking systems, with an emphasis on reliability and compliance with industry standards for commercial and government applications. This is a small business set-aside subcontract under NAICS code 336340, restricted exclusively to small businesses as defined by the SBA. The solicitation was posted on July 17, 2026, and responses are due by August 17, 2026. The place of performance is designated as 22152, indicating the primary delivery or integration location, while the contracting agency is the Department of Justice under Headquarters. There is no designated point of contact provided, and all proposals must align with the technical and compliance requirements tied to the OEM-grade specification and set-aside eligibility.

General Info

Small business set-aside for OEM-grade trailer axles, springs, hubs, drums, and brakes to Department of Justice.

Agency

Department Of Justice → HeadquatersView Agency

NAICS

336340 - Motor Vehicle Brake System ManufacturingView NAICS

Place of Performance

VA, 22152, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Justice → Headquaters
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Justice → Headquaters
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply of OEM-grade axles, leaf springs, hubs, drums, and braking components meeting durability and load-rating specifications for single and dual axle trailers.

Similar Contracts

Same NAICS industry code

NAICS: 336340
New
DIBBS
VALVE, RELAY, AIR PRESSU
Solicitation # SPE7L4-26-T-5984
This contract covers the procurement of a valve, relay, air pressure, identified by NSN 2530-01-470-5919, with a required quantity of three units to be delivered within 20 days of award. The item must strictly conform to the source-controlled drawing specification SPE7L4-26-T-5984 and the referenced technical drawing revision D dated 11/21/2023, with part number 12422042, and is supplied exclusively by WABCO USA LLC under part number 472 195 017 0. Manufacturing requires a metal casting process and compliant tooling, with all components subject to source control and no deviations permitted without formal approval. The contract mandates adherence to DLA packaging standards MIL-STD-2073-1E and MIL-STD-129, with special marking code ZZ, palletization compliant with DLA requirements, and shipment via traceable freight only—parcel post is prohibited. Delivery is FOB origin to Fort Sill, Oklahoma, with inspection and acceptance occurring at the destination. The item is classified as a critical application and must not contain ozone-depleting chemicals, mercury or mercury-containing compounds except under strictly defined exceptions, and must comply with all applicable technical and quality requirements referenced in the DLA Master List. All offers require certification of conformance unless waived by a quality assurance letter, and configuration changes must follow formal engineering change proposal procedures. The contract includes restricted data provisions and requires compliance with defense information handling protocols.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 10 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336340
New
DIBBS
Supply of 'Rod, Hood, Vehicular' (Hazardous Material)The contract entails the manufacture or supply of 37 annual units of a vehicular hood rod classified as hazardous material, with strict requirements for compliant packaging, labeling, and comprehensive safety documentation to ensure safe handling and transportation. The item falls under NAICS code 336340, indicating its classification within the automotive component manufacturing sector, and is being procured as a subcontract by the Strategic Acq Program Directorate under the Department of Defense. All deliverables must meet federal hazardous materials regulations, and the supplier is responsible for full adherence to safety and compliance protocols throughout the production and delivery process. The solicitation was posted on August 3, 2026, with a response deadline of August 18, 2026, leaving a narrow window for interested parties to submit proposals. While no set-aside preferences or specific point of contact details are provided, the procurement is tied to a Department of Defense initiative, suggesting potential military or defense vehicle integration. The place of performance and organizational address details are unspecified, but the contract must be fulfilled in accordance with U.S. government standards for hazardous material logistics and documentation. All submissions must be made through the designated DIBBS portal prior to the deadline to be considered.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 336340
New
DIBBS
SPIDER, BRAKE
Solicitation # SPE7L3-26-T-125B
The contract solicitation SPE7L3-26-T-125B seeks the procurement of SPIDER,BRAKE components identified by NSN 2530015801065, with two line items totaling 27 units—five units under CLIN 0001 and twenty-two under CLIN 0002—delivered FOB origin within 133 days after award, with a required ship date of December 15, 2026, and original delivery due by December 18, 2026. All items must be packaged in strict accordance with MIL-STD-2073-1E, using preservation method 33 (clean/dry), jute cloth cushioning of commercial thickness, unit container E8, and packaging code U, with no preservation or wrapping materials applied. Palletization must comply with DLA’s RP001 requirements, and all markings must follow MIL-STD-129 with no special markings required. Inspection and acceptance occur at the destination, specifically the DLA Distribution Albany facility in Albany, Georgia, or the New Cumberland, Pennsylvania facility depending on the line item, with no tolerance variance in quantity permitted. The contract mandates full compliance with hazardous materials handling protocols under IP025 and 252.223-7001, requiring adherence to OSHA's Hazard Communication Standard for labeling and safety documentation. The solicitation is managed by the Defense Logistics Agency under the Department of Defense, with no set-aside type designated and a NAICS code of 336340 for motor vehicle parts manufacturing. Offerors must submit proposals electronically via DIBBS by the August 6, 2026 deadline and are required to provide their Unique Entity ID and CAGE code, along with full socioeconomic representations including small business, HUBZone, WOSB, SDVOSB, and SDB status where applicable. Affirmative disclosures regarding the provision of covered defense telecommunications equipment trigger additional supplier reporting obligations. Contractual obligations include compliance with FAR and DFARS clauses addressing inspection (52.246-2), changes (52.243-1), cybersecurity safeguards (252.204-7012, 252.240-7997), trafficking in persons, employment eligibility verification, and sustainable procurement. Invoicing is governed by WAW
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 336340
New
DIBBS
VALVE, BRAKE PNEUMATIC
Solicitation # SPE7L1-26-U-0542
The contract solicitation SPE7L1-26-U-0542 seeks 165 units of a pneumatic brake valve identified by NSN 2530-01-383-5846, with a required delivery within 75 days of award. This is a total small business set-aside under NAICS code 336340, managed by the Department of Defense’s Land Supply Chain under the Defense Logistics Agency. Contract performance is governed by an indefinite-delivery, indefinite-quantity structure with a maximum value of $350,000 and a guaranteed minimum order of 24 units. The valve must be manufactured per technical specifications aligned with MIL-T-31000, requiring submission of detailed drawings, process/operation sheets, source identification for critical components like castings and forgings, and a shock extension report compliant with MIL-S-901 and DI-ENVR-80706. If reverse engineering is used, a full engineering analysis detailing methodology, sample size, measurements, tolerances, and rationales must be provided. The Haldex part number N30262 is obsolete and replaced by KN20035 RP001, and all packaging must follow MIL-STD-2073-1E with cleaning and drying preservation method 31 and unit container D3. Marking adheres strictly to MIL-STD-129, including Data Matrix barcodes and UDI labels, with hazard communication labels compliant with 29 CFR 1910.1200. Inspection and acceptance are the government’s responsibility at the destination, using inspection criteria from the DLA Master List of Technical and Quality Requirements. Cybersecurity obligations under DFARS 252.204-7012 and NIST SP 800-171 assessment requirements apply, with a deviation for the safeguarding clause. The prohibition on covered defense telecommunications equipment and hexavalent chromium use, whistleblower protections, restrictions on former DoD officials' compensation, and electronic payment submission via WAWF are mandatory. Offerors must hold a valid UEI and CAGE code, certify small business status, and disclose any joint venture partners with their UEI and CAGE codes. Proposals must be submitted electronically through DIBBS by August 18, 2026, and include all technical documentation referenced in the solicitation, with
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 336340
New
SLED
Heavy-Duty Interior Protection Kit SupplyThe contract involves the supply of pre-fabricated heavy-duty interior protection components designed specifically for a Ford F-350 custom work van, including wall liners and scuff plates to safeguard against wear and damage in demanding work environments. The components must meet rigorous durability standards to withstand frequent use, heavy equipment transport, and harsh conditions typical of law enforcement and commercial service applications. The solicitation is classified as a subcontract under NAICS code 336340, indicating it pertains to motor vehicle body manufacturing, and is issued by the Maine State Police / Traffic Safety division under the agency name Maine. The opportunity was posted on August 3, 2026, with a response deadline set for August 18, 2026, allowing potential suppliers a limited window to submit proposals. No set-aside provisions or specific small business preferences are indicated, and no detailed point of contact or physical delivery address is provided in the data, with performance location and organizational details left unspecified. All submissions and inquiries must be directed through the online portal at the provided UI link, and vendors are expected to ensure compliance with technical specifications, delivery timelines, and quality benchmarks without explicit federal procurement oversight beyond the stated classification and timing.
Maine State Police / Traffic Saf

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 336340
New
DIBBS
Manufacture of Exhaust Manifolds and Similar Engine ComponentsThe contract involves the production of exhaust manifolds and similar engine components that must meet stringent military specifications, requiring advanced precision casting, machining, welding, and comprehensive testing processes. The work is classified under NAICS code 336340, indicating it falls within the aerospace product and parts manufacturing sector, and is structured as a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency. All components must be manufactured to exacting standards to ensure reliability and performance in defense applications, with no flexibility allowed in material selection, dimensional tolerances, or quality assurance protocols. The contract was posted on August 2, 2026, and while no specific solicitation number or place of performance is provided, the work is intended to support critical defense systems. The subcontract nature suggests it is part of a larger procurement chain, likely fulfilling the needs of a prime contractor working directly with the military. The absence of set-aside details indicates the opportunity is open to any qualified supplier regardless of business size or designation. The contract's success hinges on adherence to military-grade quality control and on-time delivery, with potential consequences for noncompliance due to the mission-critical nature of the components involved.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 336340
New
DIBBS
Supply of Brake Disc Rotors (NSN 2530017220317)The contract entails the manufacture or supply of defense-specific brake disc rotors compliant with military specifications and designated by NSN 2530017220317, intended for use in military vehicle systems. The requirement is issued as a subcontract under NAICS code 336340, indicating classification within the automotive component manufacturing sector, and is managed by the Department of Defense through its Land Supplier Operations Vehicle Support organization. Performance of the contract is mandated to occur at the specified location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, ensuring alignment with logistical and operational deployment needs. The solicitation was posted on August 2, 2026, with a firm response deadline of August 13, 2026, leaving a twelve-day window for prospective suppliers to submit proposals. Although the solicitation number is not provided, the official reference can be accessed via the DIBBS platform at the published link. The contract does not specify any set-aside provisions, meaning it is open to all qualified vendors without reservation for small businesses or other designated categories. Compliance with military standards and precise dimensional and material requirements for the brake disc rotors is critical, as failure to meet specifications could render the components unusable in operational military vehicles.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Justice → Headquaters

Same awarding agency

NAICS: 813920
New
Federal
International Association of Law Enforcement Intelligence Analysts (IALEIA) Memberships
Solicitation # D-26-NC-0002
The Drug Enforcement Administration is moving forward with a sole source procurement targeting the International Association of Law Enforcement Intelligence Analysts to provide professional development opportunities for its Intelligence Research Specialists. This effort is grounded in the agency’s discretion under FAR 5.207(c)(16)(ii), allowing it to bypass competitive bidding based on the specialized nature of the services needed. The acquisition will be conducted under Simplified Acquisition Procedures via a firm fixed-price purchase order, with no set-aside designated. Vendors wishing to demonstrate their ability to meet the requirements may submit a capability statement until August 18, 2026, at 10:00 AM Eastern Standard Time, with submissions directed to Robert.A.JonesJr@dea.gov. Although the notice cites NAICS code 541930, the official contract data reflects 813920, indicating potential classification inconsistency. The point of contact for this solicitation is Robert A Jones, reachable via email or phone, and performance is expected to occur in Arlington, Virginia, with administrative oversight based at the Department of Justice headquarters in Springfield, Virginia. This notice does not constitute a solicitation for bids or quotes, and no Request for Quotation will be issued.
Professional Organizations

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 513210
Federal
Brand Name or Equal Pryme Infil Mission Planning Software
Solicitation # 15DDHQ-26-RFI-FAIT05
The Federal Government, through the Drug Enforcement Administration, is conducting market research to identify commercially available mission planning software solutions that match or exceed the capabilities of the baseline Pryme Infil platform. The software must be a purpose-built tactical system designed for high-risk domestic enforcement operations across 23 field divisions, with core requirements including secure mobile access with 99.9% uptime, automated after-action reporting within five minutes, full compliance with DOJ and CJIS data security standards, real-time asset and personnel tracking, AI-driven operational planning and risk assessment, and seamless integration with legacy systems within five minutes. The system must support live video feeds with under two seconds of latency, GPS mapping accurate to five meters, real-time emergency alerts delivered within 30 seconds including a silent bypass, and secure, searchable audit logs with time-stamped dispatch and negotiator records. The software must also feature native customization with agency-specific branding and hardcoded classification markings on all interfaces, along with automated maintenance notifications for tactical equipment and dynamic rostering updated within 30 seconds. Vendors are invited to submit capability statements of one to ten pages addressing each technical requirement, accompanied by proof of prior contracts within the last three years that are comparable in scope and scale. Responses must include company details such as UEI, CAGE, NAICS code, business size classification, and GSA or GWAC information, and must clearly state whether the solution can be delivered independently or only through teaming. This is a sources sought notice, not a solicitation, and no contract award is guaranteed. The government will not reimburse any costs incurred in responding, will not return submitted materials, and reserves the right to use all provided information for future procurement planning. All submissions must exclude classified, proprietary, or sensitive data, and responses are due by August 6, 2026, with a preference for small business participation under a total small business set-aside.
Software Publishers

POSTED

13 days ago

DEADLINE

in 1 day
View Details