Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Training

Active

w6399-26-aa19International

Response Deadline08/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, identified as W6399-26-AA19, is issued under Supply Arrangement W6399-**-**** and is open exclusively to existing holders of that arrangement. Vendors not currently part of the supply arrangement must first qualify through the process outlined by the Supply Arrangement Contracting Officer at Public Services and Procurement Canada before they may submit a proposal. The requirement is for training services, categorized under NAICS code 611430, and is being procured by the Department of National Defence on behalf of the Government of Canada. Proposals must be submitted no later than August 4, 2026, at 12:00 PM Eastern Time, with the solicitation posted on June 11, 2026. Performance of the work is expected to occur primarily in Deep River, Canada. All inquiries and communications regarding this requirement should be directed to Rami Ibrahim, the designated point of contact, via email at rami.ibrahim@forces.gc.ca.

General Info

RFP for training services under Supply Arrangement W6399, due August 4, 2026, Deep River.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

611430 - Professional and Management Development TrainingView NAICS

Place of Performance

Canada, Deep River, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation

PostedJun 9

Solicitation

Response DeadlineAug 4

Submission deadline

Response Deadline

08/04/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of National Defence

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

Contacts

Rami IbrahimContracting Authority

contact@example.gov

Full Description

Show more

This requirement is a Request for Proposal (RFP) against Supply Arrangement # W6399-**-****. All Supply Arrangement holders will be e-mailed the RFP directly. If vendors outside of the Supply Arrangement are interested in submitting a proposal, they will have to qualify for the Supply Arrangement before they are given an opportunity to bid on this requirement. Please contact the Supply Arrangement Contracting Officer at PSPC to obtain the steps required to be considered for Supply Arrangement # W6399-**-****.

Similar Contracts

Same NAICS industry code

Logistics Fundamental Program- LOGCOM

POSTED

about 9 hours ago

DEADLINE

Union for International Cancer Control (UICC) Technical Fellowship Program

National Institutes Of Health Olao

POSTED

about 9 hours ago

DEADLINE

HRC1748816 - CCP250 Accelerated Logix5000 Programmer Certificate Course Level 1

NASA Shared Services Center

POSTED

about 9 hours ago

DEADLINE

Entrepreneurship Accelerator & Business Training Program ServicesTexas Southern University is inviting qualified firms to design and deliver a comprehensive entrepreneurship accelerator and business training program aimed at empowering aspiring entrepreneurs, startup founders, and early-stage businesses. The program must be structured to enhance participants’ business acumen, leadership capabilities, operational efficiency, and long-term viability, with a focus on serving both university students and local community-based entrepreneurs through cohort-based delivery. Proposals must include detailed plans for program duration, cohort size, curriculum content, participant support systems, mentorship frameworks, performance metrics, and a clear implementation timeline. The selected contractor will be responsible for the full lifecycle of the program—from development and implementation to ongoing management and evaluation—ensuring alignment with the University’s goals of fostering economic development and entrepreneurial growth in underserved communities. The solicitation, identified by number 717-26-764 and posted on July 23, 2026, requires responses by August 11, 2026, and is managed by the University’s point of contact, Sceffers Ward, reachable via email or phone. The program will be implemented in Texas, with no specific city designated, and is intended to serve a diverse range of participants across the university and surrounding areas. Proposals must clearly justify why the proposed model is suited to meet the University’s objectives, with emphasis on scalability, inclusivity, and measurable impact. The initiative is part of a broader effort to build a sustainable entrepreneurial ecosystem linked to Texas Southern University’s mission of community engagement and educational advancement.

Texas Southern University

POSTED

about 21 hours ago

DEADLINE

Workforce Development and Local Hiring SupportThis contract focuses on supporting local hiring and workforce development efforts within the City of Dallas by requiring documentation of employment for Dallas residents and participation in approved training programs. The initiative aims to strengthen community economic outcomes by ensuring that job opportunities and skill-building activities directly benefit local individuals, with an emphasis on measurable engagement and accountability. The subcontract is categorized under NAICS code 611430, indicating a focus on other schools and instruction, which may include vocational training, adult education, or workforce readiness programs tailored to Dallas residents. The opportunity was posted on July 23, 2026, with a response deadline of August 28, 2026, providing a five-week window for interested parties to submit proposals. It is issued by the City of Dallas under the state of Texas and places no set-aside designation, meaning it is open to all eligible contractors regardless of business size or ownership status. Performance is expected to occur within Dallas, though specific geographic details are not outlined. Interested participants must be prepared to track and report on resident employment and training participation as core deliverables, aligning with the city’s broader goals to foster inclusive economic growth and local workforce capacity.

POSTED

about 24 hours ago

DEADLINE

in about 1 month

Request for Information - AI Tourism Prototype Builder ProgrammeThe Tourism Enhancement Fund under the Government of Jamaica is inviting potential bidders to provide information for the development and delivery of an AI-driven prototype training programme aimed at advancing tourism innovation. The initiative, identified by solicitation number 1707/527, seeks to equip participants with the skills to design, evaluate, and refine digital tourism prototypes using artificial intelligence tools. Key activities include collaborating with the project team to define the programme’s scope and objectives, creating targeted training materials on digital prototyping, design principles, and AI prompting techniques, and delivering both group and individualized sessions to guide participants through the selection and development of appropriate prototypes. The programme emphasizes hands-on practical exercises using AI-enabled platforms tailored to each participant’s concept, supplemented by ongoing mentorship and feedback to support finalization of their prototypes. Bidders are required to submit a comprehensive final report detailing all activities undertaken, measurable outcomes achieved by participants, and actionable recommendations for future iterations of the programme. The request for information is open under a public solicitation with a submission deadline of August 11, 2026, and is administered through the Jamaica Economic Procurement Portal. While no specific set-aside or NAICS code has been designated, the programme is open to qualified entities capable of delivering advanced AI and digital innovation training in a structured, results-oriented manner. The initiative is fully aligned with Jamaica’s broader goals of digitizing its tourism sector through innovation and capacity building, with all training activities expected to be conducted in alignment with the country’s strategic priorities.

Tourism Enhancement Fund

POSTED

DEADLINE

Identity Management System User Support and TrainingThe contract involves the development and delivery of comprehensive training programs tailored for system administrators, help desk personnel, and end users to effectively utilize the identity management system. These programs are designed to ensure all user groups are properly equipped with the knowledge and skills needed to navigate, manage, and support the system according to their respective roles. In addition to training, ongoing technical support is required to maintain system performance, troubleshoot issues, and provide timely assistance to users across the organization. The work is classified under NAICS code 611430, indicating a focus on professional and technical training services. The contract is structured as a subcontract and is being issued by the Kentucky Community and Technical College System, with responses due by August 18, 2026. The place of performance and other administrative details are not specified, but the effort is expected to support the broader identity management infrastructure across the Kentucky educational network.

Kentucky Community and Technical College System

POSTED

DEADLINE

User Training and Capacity BuildingThe contract focuses on delivering virtual or in-person training sessions to ensure accurate and consistent application of the CANS, FAST, UFACET, and TCOM tools across participating organizations. These training sessions are designed to build organizational capacity and maintain fidelity in the use of these assessment and decision-making frameworks, which are critical for service delivery in behavioral health and child welfare contexts. The work requires trainers with deep subject matter expertise and the ability to adapt content to diverse audiences, whether remotely or on-site. This is a subcontract under Utah’s initiative with a posted date of July 23, 2026, and a response deadline of August 3, 2026. It is classified under NAICS code 611430, which corresponds to other schools and instruction, indicating an emphasis on professional development and educational services. The place of performance and agency office details are unspecified, but all activities must align with Utah’s standards and expectations. Bidders must demonstrate experience in training on trauma-informed, strength-based tools and be prepared to meet rigorous fidelity benchmarks to support systemic implementation across the state’s service network.

POSTED

DEADLINE

Practitioner Review Facilitation for Clinical ToolsThis contract seeks to facilitate peer review sessions among clinical practitioners to validate assessment tools and ensure model fidelity, with the goal of maintaining high standards in clinical evaluation methods. The work involves coordinating structured reviews by qualified professionals to confirm the accuracy, reliability, and uniform application of existing clinical tools, ensuring they align with established best practices and maintain fidelity across different settings. The effort is designed to support continuous quality improvement in clinical decision-making through expert consensus and collaborative evaluation. The contract is classified as a subcontract under NAICS code 611430, which pertains to educational support services, and is issued by the state of Utah. It was posted on July 23, 2026, with a response deadline of August 3, 2026. There is no specified set-aside classification or location details provided, and the point of contact information is not included. Interested parties must submit their responses through the designated online portal at the provided link. The absence of detailed administrative or geographic information suggests that the work may be conducted remotely or through distributed collaboration among practitioners across the state.

POSTED

DEADLINE

Customer Education and Outreach ServicesThe contract seeks providers to deliver education, application assistance, and outreach services to promote customer engagement with a program administered by the Water & Power Department in California. The work involves designing and implementing initiatives that inform the public about program benefits, guide participants through application processes, and conduct targeted outreach to ensure broad and equitable participation. Services must be tailored to reach diverse communities and remove barriers to access, with an emphasis on clear communication and customer support. The opportunity is classified as a subcontract under NAICS code 611430, which pertains to other schools and instruction, suggesting a focus on instructional or educational delivery methods. It was posted on July 23, 2026, with a response deadline of August 21, 2026. The place of performance is not specified beyond the state of California, and no set-aside provisions are indicated. All proposals must be submitted through the provided online portal before the deadline.

Water & Power Department

POSTED

DEADLINE

Training and User OnboardingThe contract seeks a subcontractor to develop and deliver comprehensive training materials and live sessions to onboard HR staff onto a new background screening system. Deliverables include detailed user guides, video tutorials, and virtual onboarding programs designed to ensure smooth adoption and proficient use of the system by HR personnel. The work is intended to support internal capacity building within the City of Detroit’s Michigan agency, with all training components to be tailored for clarity, accessibility, and practical application in daily HR operations. The opportunity is classified under NAICS code 611430, indicating it is for other schools and instruction services, and is posted as a subcontract with a response deadline of August 10, 2026. The procurement was published on July 23, 2026, and interested parties are expected to respond through the provided online portal.

City Of Detroit

POSTED

DEADLINE

Clinical Training Curriculum Development (Sexual Health & Aging Providers)Public Health Solutions is seeking a subcontractor to develop and finalize a culturally competent, stigma-free training curriculum focused on sexual health for aging populations, specifically targeting healthcare providers. The curriculum must be clinically accurate, inclusive of diverse identities and experiences, and designed to reduce stigma and improve provider competency in addressing the sexual health needs of older adults. The final deliverable is a certified, digitally signed PDF that meets all required standards for educational certification and is ready for immediate deployment. The opportunity is posted under NAICS code 611430 and has a submission deadline of September 14, 2026, with proposals due by 7:00 PM. The contract is structured as a subcontract, and while no set-aside type or specific location is designated, all work is expected to align with the agency’s mission to advance equitable public health outcomes in New York and beyond.

Public Health Solutions

POSTED

DEADLINE

in about 2 months

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

RCACS Workplace FurnitureThe Department of National Defence is soliciting office furniture under the NPP titled RCACS Workplace Furniture, referenced by solicitation number W2037-27-0429/A, issued under the PWGSC Supply Arrangement E60PQ-140003/D for Product Categories 2 and 3, covering work surfaces and filing and storage products. The requirement is for the purchase, delivery, and installation of furniture at a location in Oromocto, New Brunswick, with a strict delivery and installation deadline of 30 September 2026. This solicitation is open exclusively to suppliers holding the General Stream of the applicable supply arrangement, ensuring competition among pre-qualified vendors. The proposal must be submitted by 18:00 Eastern Time on 31 July 2026, with Aaron Pound identified as the primary contracting authority reachable via email and phone. The opportunity is posted on Canada Buys with a public UI link for access and further details.

Institutional Furniture Manufacturing

POSTED

about 16 hours ago

DEADLINE

POSTED

about 16 hours ago

DEADLINE

Disk, Clutch, NonvehicularThe Department of National Defence is soliciting bids for the procurement of Disk, Clutch, Nonvehicular components to support Halifax-class ship systems, specifically the Main Gear Transmission Assembly and the Cruise Engine Friction Disc Clutch Assembly. The requirement is detailed in the Annex Statement of Requirements, which specifies line items including part numbers, quantities, NSNs, GSINs, UNSPSC codes, and delivery codes for each component, with deliveries required at CFB Halifax and CFB Esquimalt. Bidders must submit their offers through the CPC Connect service using mandatory forms in their original formats: the Offeror Submission Details in both Excel and PDF, and the Offeror Submission Form and Offeror Declaration Form in PDF. Proposals may be submitted in either English or French. All offers must include the part number and NCAGE of the item being supplied, and any equivalent or substitute products must be identified with brand name, model, part number, and NCAGE, along with complete specifications and descriptive literature to ensure no adverse impact on existing third-party warranties. The contract will be awarded based on the lowest evaluated price among compliant offers, with multiple contracts possible, and all submissions failing to meet mandatory technical criteria will be deemed non-compliant. Packaging and marking must adhere to strict standards: U.S.-based contractors must follow MIL-STD-2073 and MIL-STD-129, while other international contractors must comply with NATO TL8100-0100 at a minimum packing level C. Each item must be clearly labeled with manufacturer and specification numbers via high-commercial-standard adhesive labels or stamped/etched directly onto the component, with barcodes positioned according to Canadian Forces Packaging Specification D-LM-008-002/SF-001. For hazardous materials, contractors must comply with the Transportation of Dangerous Goods Act and Hazardous Products Act, marking containers with hazardous volume percentages and providing bilingual Safety Data Sheets indicating the NATO Stock Number. Contractors are fully liable for damages arising from improper handling of hazardous goods. The Contractor must comply with ISO 9001:2015 quality management standards and maintain documentation supporting inspection and quality control for a minimum of one year post-contract expiration. Invoicing requires a packing slip or waybill, with payment to be made within 30 days of receipt of a conforming invoice to designated accounts at Maritime Forces Atlantic or CFB Esquimalt. The contractor must maintain an accounting system capable of providing numeric or machine-readable records, retain all

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

Flex Hose Connections and Seal Replacement Parts Kit

POSTED

about 16 hours ago

DEADLINE

Hose Assembly, Non Metallic for Fuel Systems

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 16 hours ago

DEADLINE

Electrical Load BanksThe Department of National Defence, through Defence Research and Development Canada, is soliciting proposals for the procurement of Electrical Load Banks to support the Over The Horizon Radar Initiative, with deliverables destined for field trials at an Arctic site and the OTHR test bed at the Shirley’s Bay location in Ottawa. The requirement is to be fulfilled under a single contract, with all equipment required to be ready for shipment no later than 90 days after contract award. The procurement is governed by the Canadian Free Trade Agreement and the Canada-Korea Free Trade Agreement and is subject to a Comprehensive Land Claims Agreement. Selection will be based on the highest combined rating of the Inuit Benefit Plan commitment and price, without restriction to firms registered in the Inuit Firm Registry, and the Crown reserves the right to negotiate with any supplier. Proposals may be submitted in either official language of Canada, and while the Crown retains discretion not to award a contract, any discrepancy between this notice and the Request for Proposal will be resolved in favor of the RFP. There are no security requirements for this procurement. The solicitation number is W6369-27-X002, with a response deadline of July 24, 2026, at 14:00 Eastern Time, and the contract is currently unfilled. The contracting authority is Amy Lee Gönye, reachable via email at Amy.LeeGonye@forces.gc.ca, and inquiries must be directed to her. The North American Industry Classification System code is 335313, indicating a federal procurement within the Electrical Equipment manufacturing sector. The place of performance is listed as Ottawa, with no other location specified. Although the notice references several standard federal contract sections including those relating to evaluation factors, deliverables, representations, special requirements, and contract clauses, none of these sections contain accessible or provided content, and no pricing, technical specifications, packaging instructions, inspection criteria, or contract value details are available in the provided materials. All submissions and communications are to be handled directly with the designated contracting officer.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 16 hours ago

DEADLINE

INTRENCHING TOOL,HAND

POSTED

about 16 hours ago

DEADLINE

ACCOMMODATIONS FOR STUDENTS ATTENDING BCIT COLLEGEThe Department of National Defence is seeking a contractor to provide student accommodation for 68 Canadian Armed Forces personnel attending the first semester of AME-E courses at the British Columbia Institute of Technology in Burnaby and Richmond, British Columbia, beginning August 2026. The accommodation requirement spans two cohorts: 34 students from August 1 to November 28, 2026, and another 34 students from August 22 to December 19, 2026. Units must be located on BCIT campuses or within 35 kilometers of the institute, and each room must include one or two single, double, or larger beds with adequate bedding, a private lockable three-piece bathroom with toilet, sink, and shower, a closet, dresser, desk, and chair, and must exclude sofa beds or cots. Additional amenities include individual key or fob access, secure gender-safe areas, in-room Wi-Fi, climate control with temperature regulation, an individual study area either in-room or in a quiet common space, and onsite self-serve laundry with a minimum of two washers and two dryers. The contract is fixed price with no security requirements, and payment will be made on a per-delivery basis within 30 days of receiving a properly formatted invoice. The total contract value and limitation of expenditure have been left for insertion at award and are determined solely by the lowest evaluated price among compliant offers. Compliance with mandatory technical criteria is required to be deemed eligible for award. The contract period runs from the award date through December 19, 2026, inclusive, and performance must adhere to strict specifications outlined in Annexes A, B, and Mandatory Technical Criteria. Contractors must maintain complete records, provide invoices with detailed supporting documentation including receipts and vouchers for all direct and living expenses, and include required data such as contract number, client reference number, business number, and financial codes. Invoices must be submitted electronically to the designated contact point and cannot be submitted until all described work is completed. The contractor is responsible for ensuring compliance with Canada’s Code of Conduct for Procurement, the Ineligibility and Suspension Policy, and must certify that no forced labor was used in producing the services. The warranty for all accommodations must be at least 12 months or the contractor’s standard period, whichever is longer. The contractor must also certify adherence to employment equity requirements and that no conflict of interest exists. Failure to meet any mandatory technical condition will result in non-compliance and disqualification

Rooming and Boarding Houses, Dormitories, and Workers' Camps

POSTED

about 16 hours ago

DEADLINE

Multiple Victoria-Class Spares: Valve, O-ring, Lamp, Connector, Bush

POSTED

about 16 hours ago

DEADLINE

in about 2 months

Digital Feasibility Study of a solid-state hydrogen-powered Light Armoured Vehicle (LAV)The Department of National Defence is seeking a qualified supplier to conduct a digital feasibility study for a solid-state hydrogen-powered Light Armoured Vehicle (LAV) with a maximum weight of 45,000 lbs, under solicitation W8486-270848/A. The contract is valued at a ceiling of $1,200,000, with funding allocated as $500,000 for fiscal year 2026/27 and $700,000 for fiscal year 2027/28, and all payments are on a cost-reimbursable basis, exclusive of applicable taxes but inclusive of customs duties and delivery expenses. The work must be completed no later than March 20, 2028, with deliverables tied to milestone payments including a Project Schedule, High-Level Mandatory Requirements and Mission Profile, 3-D CAD designs, SWaP analysis for 4x4, 6x6, 8x8, and tracked configurations, and a Final Project Report aligned with specified Contract Data Requirements. The solicitation requires offers to be submitted in three sections: Technical, Financial, and the Offer Submission and Declaration Forms, with mandatory certification of Business Number, compliance with the Ineligibility and Suspension Policy, and adherence to the Code of Conduct for Procurement. No supplier security clearance is required, and the contractor must maintain detailed records of all costs and expenditures for audit purposes. Evaluation of proposals will be based on a combination of pass/fail mandatory criteria and weighted technical factors totaling a maximum of 220 points, with a minimum score of 130 required to be considered responsive. The top technical evaluation factors include Project Management Professional certification (15 points), demonstrated experience in at least three relevant projects (30 points), and experience with specific military vehicle platforms such as 4x4, 6x6, 8x8, or tracked (unspecified weight). The technical proposal must directly address all evaluation criteria in the order listed, and all submissions must be signed and submitted via the SAP Business Network portal before the closing date of August 5, 2026. Only qualified supply arrangement holders will receive the RFP directly; it is not accessible through CanadaBuys. The contract includes clauses covering government property, access to information, accounts and audit, insurance, termination for convenience or default, and proactive disclosure of contracts with former public servants. Invoices for payment must

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Multiple Victoria-Class Spares : PILGRIM NUT INFLATABLE TIRE, DISK,VALVE, PARTS KIT,SEAL REPLACEMENT,MECHANICAL EQUIPMENT, PACKING,PREFORMED and STUD,SHOULDEREDThe Department of National Defence is seeking spares in support of the Victoria-class submarines through solicitation W8482-275278/A, with deliverables required at Canadian Forces Base Esquimalt and Canadian Forces Base Halifax. The procurement includes six line items: a parts kit for mechanical equipment seal replacement, preformed packing, and four shoulderered stud variants, with specific quantities and part numbers designated for each. All items must be new and conform to the latest issued drawings and specifications, with items 1 and 2 requiring at least 75 percent of their 84-month authorized shelf life remaining upon delivery. Packaging and marking must strictly follow Canadian Forces standards, including individual packing per D-LM-036/SF-000 for items 1, 3, 4, 5, and 6, and specific labeling for item 2 and rubber components per D-LM-008-026/SF-001. Shipments exceeding 0.566 m³ or 15.88 kg must be palletized on standard 1.22m x 1.02m wood pallets conforming to ISPM 15, and all documentation must accompany the shipment, including a bill of lading, original invoice, and packing slip with item, part, and contract details. Delivery is governed by FCA Incoterms 2020, with the contractor bearing all risks and costs until delivery to the contracted location, and excessive goods are not payable by Canada. Compliance with ISO 9001:2015 is mandatory for line items 5 and 6, while a quality system based on ISO 9001:2015 is recommended for items 1 through 4. Contractors proposing substitutes must declare the brand, model, part number, and NCAGE. All deliveries must be accompanied by a Certificate of Conformity per NATO STANAG 4107 for foreign-based contractors or DD Form 250 for U.S.-based contractors, with release documents distributed to the consignee, contracting authority, NDHQ, and QAR. Payment is via electronic transfer, direct deposit, or wire transfer, with undisputed invoices settled within 30 days and a 15 percent withholding tax applied to non-residents. The contracting authority is Alexandre Branco-Sauvageau, and offers must be submitted electronically via PWGSC’s

POSTED

DEADLINE

in about 2 months

Multiple Victoria Class Spares : Gaskets and GearsThe Department of National Defence is seeking bids for spare parts essential to the maintenance and operational readiness of the Victoria-class submarines, with deliveries required at both CFB Esquimalt and CFB Halifax. The solicitation includes eight line items comprising packing material, gaskets, and a spur gear, all identified by specific National Stock Numbers, part numbers, and NCAGE codes to ensure strict compatibility with existing Canadian military equipment. Each item is duplicated for delivery to both locations, totaling 5 units of packing material, 20 gaskets across three part numbers, and 2 spur gears. Bidders must adhere to rigorous technical specifications, including precise packaging and marking requirements dictated by Canadian Forces Packaging Specifications, and must provide manufacturer certificates of conformity signed by authorized personnel. Quality assurance mandates compliance with ISO 9001:2015 under Quality Assurance Code C for most items and Code Q for the spur gears, with Canada retaining full right of access to supplier facilities for inspection throughout the production and delivery phases. All bids must be submitted in separately bound technical, financial, certification, and additional information sections, with submissions accepted electronically via Canada Post’s CPC Connect service or in hard copy adhering to strict sustainability standards, including recycled content and double-sided printing. Bids must include accurate part numbers and NCAGE codes, and Canadian suppliers are required to quote prices exclusively in Canadian dollars; failure to meet any mandatory technical or currency criteria renders a bid non-responsive. The contract will be awarded on an item-by-item basis to the lowest evaluated responsive bid, with payment processed through electronic methods including direct deposit and EDI upon delivery and certification. Delivery must occur under FCA Incoterms 2000 terms, meaning bidders are responsible for loading goods onto carriers designated by the Department of National Defence. The contract period extends to the end of the warranty period as defined in the general conditions, and ongoing compliance with all submitted certifications is a condition of contract performance, subject to verification at any time. All documentation may be submitted in either English or French, and the closing date for submissions is July 17, 2026, at 14:00 EDT.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE