This Combined Synopsis/Solicitation opportunity from Department Of Transportation was posted on December 10, 2015. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Training Ship Empire State pre-cruise repairs

Awarded

DTMA92Q1600003Federal

Submission Closed12/29/2015, 09:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611

New

SLED

F&W, 2018 Munson Packman Boat Repower project

Solicitation # 2018 Munson Packman Boat Repower

The Confederated Tribes of the Colville Reservation Fish and Wildlife Department is seeking a factory-certified marine contractor to perform a complete propulsion repower and helm system integration on a 30 foot Munson Packman landing craft. The project involves the decommissioning and removal of two existing Honda BF250A outboard engines and legacy iST components, followed by the installation of two new Honda BF250D Drive-by-Wire outboards. The scope of work includes comprehensive digital rigging, the installation of new Honda iST electronic control heads at dual helm stations, integration with the existing NMEA 2000 backbone and SeaStar Power Assist steering system, and a full fuel system overhaul using USCG Type A1-15 lines. The project concludes with factory diagnostic checks and a minimum two hour sea trial to validate performance and safety protocols. To ensure quality and warranty coverage, the contractor must be an authorized Honda Marine Dealer or Service Center and employ technicians with at least five years of experience with commercial aluminum vessels and complex marine networks. Proposals must be submitted as a PDF by November 13, 2026, and must provide a firm-fixed price. Award selection is based on a 100 point evaluation criteria, with a preference for responsible Indian Offerors. The contract requires the contractor to maintain significant insurance coverages, including 1 million dollars per occurrence in general liability, and mandates a 25 percent retainage or a performance bond for contracts exceeding 100,000 dollars. All disputes are subject to the jurisdiction of the Colville Tribal Court and tribal law, and contractors must comply with the Colville Tribal Employment Rights Ordinance.

Confederated Tribes of the Colville Reservation

POSTED

DEADLINE

USNS EARL WARREN (T-AO 207) ROH/UWILD

Solicitation # N6264927RL005

NAVSUP Fleet Logistics Center Yokosuka, Site Singapore, is soliciting a fixed-price contract for the repair and maintenance of the USNS EARL WARREN (T-AO 207), specifically for Restricted Overhaul and Underwater Inspection in Lieu of Drydocking (ROH/UWILD) services. The work must be performed in accordance with the Military Sealift Command specification SSUN 27-010 and ABS standards. The period of performance is scheduled from May to July 2027, with the place of performance located within the U.S. 7th Fleet Area of Responsibility, excluding India. This is a total small business set-aside procurement, and interested offerors must maintain an active registration in the System for Award Management (SAM). Proposals are due by December 2, 2026, at 1:00 PM Singapore Standard Time and must be submitted electronically via DoD SAFE. The award will be granted to the responsible offeror providing the lowest evaluated price, provided their technical approach and past performance are rated as acceptable. Evaluation of past performance focuses on similar work performed on Navy or government military vessels within the last five years. Required submission volumes include a price proposal using Attachment J-3, a technical volume, a past performance volume, and a cover page with administrative requirements. Payment will be processed through Wide Area WorkFlow (WAWF) and managed by the designated Project Planning and Execution (PPE) personnel.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

USCG STA SAN FRANCISCO (45667) FY27 DD REPAIRS

Solicitation # 70ZU0327QSBPL0001

POSTED

DEADLINE

Solicitation # N6817127QN006

Solicitation N6817127QN006 is a Request for Quote issued by NAVSUP FLC Sigonella Naples Office for firm fixed price non-commercial voyage repair services for the USS RAFAEL PERALTA (DDG 115). The work is to be performed in Mombasa, Kenya, with a period of performance from November 12, 2026, to November 18, 2026. The scope of work includes hull maintenance such as high-pressure fresh water washing, cleaning and inspection of air conditioning and refrigeration plant condensers, rust and corrosion removal, replacement of lagging and insulation, furniture upholstery replacement, and the provision of rigging services and scaffolding. All work must adhere to NAVSEA Standard Items and SCF Part 1915 Occupational Safety and Health Standards for Shipyard Employment. Award will be granted to the lowest priced technically acceptable offeror, with technical capabilities rated as either acceptable or unacceptable. Prospective contractors must submit a completed J-1 Price Breakdown in US dollars, a draft Test and Inspection Plan, and a signed Use and Non-Disclosure Agreement to access restricted technical data. Required submission documentation includes Standard Form 18, completed Standard Form 30 amendments, and technical qualifications verified via the Attachment J-3 checklist. The deadline for proposal submission is November 2, 2026, at 13:00 CET. Post-award invoicing must be processed electronically through Wide Area WorkFlow.

Navsup Flc Sigonella Naples Office

POSTED

DEADLINE

DRYDOCK: USCGC WILLIAM CHADWICK DD FY2027

Solicitation # 70ZU0127PBPLWCHADWICK

POSTED

DEADLINE

USS MAKIN ISLAND (LHD 8) FY28 Docking Selected Restricted Availability (DSRA) Request for Proposal(s)

Solicitation # N0002426R4421

The Naval Sea Systems Command (NAVSEA) is soliciting proposals for the USS MAKIN ISLAND (LHD 8) Fiscal Year 2028 Docking Selected Restricted Availability (DSRA). This Signature Availability involves a comprehensive combination of maintenance, modernization, and repair, including hull structure, propulsion and electric plants, auxiliary systems, and habitability upgrades. The project requires a contractor with substantial West Coast facilities, including a capable pier and dry-dock. The government anticipates making a single Firm Fixed-Price award in or before March 2027, with the period of performance beginning in November 2027 and concluding by October 30, 2029. The procurement is not set aside for small businesses due to the complexity and magnitude of the requirements. Proposals are due by November 23, 2026, via the Procurement Integrated Enterprise Environment (PIEE) and will be evaluated based on Best Value using trade-off procedures. Evaluation factors include price, technical eligibility, physical resource capacity, manpower, small business participation, schedule execution approach, and past performance. The scope includes significant growth work estimated at 211,989 direct labor hours and over 9.5 million dollars in materials, with additional incentives available for milestone achievements and small dollar value growth settlements.

POSTED

DEADLINE

U.S. NAVY VESSEL - CASREPS - AC AND REEFER PLANT REPAIR

Solicitation # N6817127QN009

Solicitation N6817127QN009, issued by the Navsup Flc Sigonella Naples Office for the U.S. Navy, seeks a qualified Carrier system service provider to perform troubleshooting, diagnosis, and repair of a vessel's air conditioning and refrigeration plant. The scope of work includes restoring the A/C system to operational status, testing system components, and procuring necessary parts for the refrigeration plant. Performance will take place in Malaga, Spain, with a period of performance from November 16, 2026, through November 20, 2026. The work is governed by specific NAVSEA drawings and technical manuals, and the contractor must provide proof of ISO 9001 or 14001 certification for marine maintenance and repair services. Award will be granted based on the Lowest Price Technically Acceptable (LPTA) basis, where technical capability is rated as either acceptable or unacceptable. Qualified offerors must submit their quotes and technical documentation via email by November 9, 2026. The contract requires adherence to strict safety standards, particularly regarding high voltage electrical systems, and mandates electronic invoicing through Wide Area WorkFlow (WAWF). This is not a small business set-aside, and the contractor must comply with various FAR and DFARS clauses, including those related to hazardous materials labeling and vessel access.

Navsup Flc Sigonella Naples Office

POSTED

DEADLINE

7th Fleet Welder Qualification and Sustained Capability Program

Solicitation # SSP27-D001

The Department of the Navy, through NAVSUP Fleet Logistics Center Yokosuka, is issuing a Request for Information and Sources Sought notice under solicitation SSP27-D001 to identify qualified commercial ship repair facilities within the 7th Fleet Area of Responsibility, excluding Hawaii. The primary objective is to establish a welder qualification and sustained capability program to address capability gaps in ship repair and maintenance. The government intends to utilize Firm-Fixed-Price contracts under FAR Part 12 for commercial products and services. Interested sources must hold an active Master Ship Repair Agreement or Agreement for Boat Repair and provide a company profile including their UEI, CAGE code, and SAM.gov registration status. The technical scope is strictly limited to Shielded Metal Arc Welding (SMAW) of carbon steel for plates ranging from 1/8 inch to 1-1/2 inch thick, adhering to AWS-NAVSEA B2.1-1-302:2015 and Local Work Template 042-001. The program is structured into a Base CLIN for the qualification phase, covering welding procedure preparation, PQR certification, and sustainment planning, and a conceptual Option CLIN for future on-call structural voyage repairs. Requirements include the use of certified ABS Grade A steel plate and AWS A5.5 E7018-A1 electrodes, with mandatory NDT inspections including Class 1 Visual, Radiographic, and Magnetic Particle testing. All qualification work must be performed at the contractor's facility using regular employees and approved equipment. Responses, which must not exceed 10 pages and include a rough-order-of-magnitude cost estimate, are due by November 15, 2026, at 10:00 AM Singapore time. Clarification questions must be submitted by November 2, 2026. The government is seeking detailed information on contractor capabilities, proposed performance timelines, and the ability to provide qualified all-position SMAW welders who meet specific prerequisite documentation standards, including current eye exams and recent process maintenance logs.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-1746

Solicitation SPE7L1-27-T-1746 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 37 angle valves, identified by NSN 4820002789870. This is a restricted source item designated for critical application, requiring engineering source approval by the Government Design Control Activity. The procurement references Milwaukee Valve Company part numbers 1023-001H-1 1/2 and 1023-001J-1 1/2. Delivery is required within 152 days, with the destination for both inspection and acceptance being the Distribution Depot Puget Sound in Bremerton, Washington. The contract mandates strict adherence to quality and environmental standards, including the prohibition of Class I ozone depleting chemicals and specific restrictions on mercury and mercury-containing compounds per NAVSEA 5100-003D. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various DFARS and FAR clauses regarding cybersecurity, domestic material preferences, and the prohibition of covered defense telecommunications equipment. The acquisition falls under NAICS code 336611.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

CYLINDER, HYDRAULIC ACC

Solicitation # SPE7M0-27-T-0456

Solicitation SPE7M0-27-T-0456 is a fixed-price request for quotations issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for one hydraulic accumulator cylinder, NSN 2090-01-450-1199. The item is to be delivered to the Puget Sound Naval Shipyard IMF in Bremerton, Washington, with a required delivery lead time of five days after order. Inspection and acceptance will occur at the destination per FAR 52.246-2. Quotations must be submitted via the DIBBS system by October 30, 2026. The contract mandates strict adherence to technical and quality standards, including Item Unique Identification (IUID) per MIL-STD-130 and DFARS 252.211-7003, and packaging requirements per RP001 and MIL-STD-2073-1E. Technical data for this item is subject to ITAR or EAR export controls, requiring contractors to have approved JCP certification and specific DLA authorizations. Additionally, the hardware must not contain intentionally added mercury, and the government will not evaluate offers utilizing additive manufacturing unless specifically authorized. Compliance with the Buy American Act and the Berry Amendment is required for quotes above the micro-purchase threshold. Evaluation includes a price preference for certified HUBZone Small Business Concerns. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment, and adherence to DFARS 252.204-7012 for safeguarding covered defense information.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

CONSOL Station Design and InstallationThis subcontract, titled CONSOL Station Design and Installation, involves the engineering and installation of two CONSOL stations for prime contractors on Military Sealift Command tanker projects. The scope of work requires the integration of these stations into existing vessel manifold and piping systems to facilitate ship-to-ship petroleum transfers at sea. All work must be performed in accordance with USCG and classification society standards to ensure the delivery of two fully operational and certified stations. Managed by the Department of Defense through Mschq Norfolk under NAICS code 336611, the project was posted on October 30, 2026. Interested parties must submit their responses by the deadline of November 13, 2026.

POSTED

DEADLINE

Marine Fender Installation & Hull WorkThis small business set-aside subcontract, managed by the Department of Homeland Security for the U.S. Coast Guard, involves the removal and installation of rubber fender systems on a 108 foot Yard Patrol Craft in Curtis Bay. The scope of work requires the removal of existing upper and lower fendering and securing bars, followed by the installation of 24 Type-D black EPDM fenders using new studs, nuts, and washers. The contractor is responsible for conducting visual, probe, and hammer test inspections of the oak shims and mounting plates to ensure structural integrity. The final deliverable is a fully installed and secured rubber fender system across the hull and transom. Responses for this opportunity are due by November 16, 2026.

CG-SEA-C23

POSTED

3 days ago

DEADLINE

in 14 days

AI Contract Overview

Solicitation DTMA92Q1600003, issued by the U.S. Maritime Administration under the Department of Transportation, seeks a firm fixed price purchase order for the FY16 pre-cruise repairs of the Training Ship Empire State. The work is to be performed in Bronx, New York, with a period of performance spanning from January 11, 2016, through May 27, 2016. This procurement is designated as a total small business set-aside under NAICS code 336611 and is evaluated based on the lowest price, technically acceptable criteria, taking into account technical capability, past performance, and price. The scope of work involves a comprehensive pre-cruise package that includes general service requirements, specific repair items, and optional labor and materials. Key tasks encompass safety surveys, equipment calibration, and various overhauls to ensure the vessel complies with USCG, ABS, and SOLAS regulations. The detailed bid schedule is organized into sections covering the description of services, specific repair items, and optional items to ensure all maintenance and safety standards are met prior to the ship's cruise.