Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on July 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

TRANSMITTER, PRESSUR

Closed
SPE4A5-26-T-315VFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334519
New
DIBBS
HOLDER, RADIOGRAPHIC
Solicitation # SPE4A6-26-T-19U5
The contract involves the procurement of 10 units of a radiographic film exposure holder, identified by NSN 6635-00-731-5683. The items are commercial off-the-shelf (COTS) products supplied by manufacturers including General Electric Co. Medical and HD Aero Support, Inc. The contract specifies strict adherence to technical and quality requirements from the Defense Logistics Agency’s (DLA) Master List, with sampling and inspection procedures governed primarily by MIL-STD-1916 or equivalent standards. Packaging and marking must comply with DLA packaging requirements and MIL-STD-129, with delivery FOB origin and inspection and acceptance taking place at the origin point. The material does not have a shelf-life requirement, and item unique identification is waived per request. Delivery is expected within 20 days of order, with the final delivery date set for March 26, 2026. The items are to be shipped to the ROKAF LC Consolidated Supply Depot in Busan, South Korea, utilizing multiple freight forwarders as outlined in the DLA transportation procedures. Price, quantity, and contract administration details are well-defined, emphasizing zero variance on quantities and strict adherence to quality assurance protocols. The contracting agency is the Department of Defense, with the ASC Commodities Division overseeing the procurement. The point of contact for the contract is Katisha Carter, reachable via email and phone.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 2 days

AI Contract Overview

Show more

The contract is for the procurement of three pressure transmitters under solicitation SPE4A5-26-T-315V, with a total quantity of three units to be delivered within 282 days to the designated receiving warehouse in Tracy, California. The item is identified by NSN 6685-01-406-8943 and must conform to technical specifications outlined in MIL-T-24742 Revision D dated 04/26/1990. Compliance with DLA’s Master List of Technical and Quality Requirements is mandatory, and all packaging, marking, and preservation must adhere to MIL-STD-2073-1E and MIL-STD-129, including special labeling for delicate instruments. Mercury and mercury-containing compounds are strictly prohibited unless expressly exempted for specific functionalities such as batteries, fluorescent lights, or sensors as defined by NAVSEA, and any permitted devices must include a secondary containment barrier. Sampling for quality verification must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned specific verification levels or AQLs unless otherwise directed. The contract is a total small business set-aside under NAICS code 334519, with delivery FOB origin and inspection and acceptance occurring at destination. The required delivery date is May 17, 2027, and no quantity variance is permitted. Packaging and preservation methods must exclude mercury entirely, and all units must be palletized per DLA packaging standards. The point of contact for procurement inquiries is Jamie Bonda of the Department of Defense’s ASC Supplier Operations OEM Division.

General Info

Three pressure transmitters, NSN 6685-01-406-8943, deliver to Tracy CA by May 17, 2027, no mercury, military specs, small business set-aside.

NAICS

334519 - Other Measuring and Controlling Device Manufacturing

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

SBA

Documents

1

RFQ SPE4A5-26-T-315V DLA Aviation Jul 31 2026

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUSA

Full Description

Show more
TRANSMITTER,PRESSUR
TRANSMITTER,PRESSURE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-T-24742 REVISION NR DTD 04/26/1990 PART PIECE NUMBER: M24742RS32DXDCA
SPE4A5-26-T-315V
SECTION B
PR: 7017697328 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017697328 0001 EA 3.000
NSN/MATERIAL:6685014068943
DELIVERY (IN DAYS):0282
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:05 -05 Delicate instrument
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
SPE4A5-26-T-315V
SECTION B
PR: 7017697328 PRLI: 0001 CONT’D
Need Ship Date:05/17/2027 Original Required Delivery Date:05/17/2027
SPE4A5-26-T-315V NSN/Part Number: 6685-01-406-8943 Quantity: 3 EA Purchase Request: 7017697328QTY: 3 Delivery: 282 days ADO

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-311V
The contract specifies the procurement of a wire rope assembly with part number 582-7006 and NSN 4010-01-618-1374, for a quantity of eight units, under solicitation SPE4A5-26-T-311V. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, with marking adhering to MIL-STD-129 and no special marking codes applied. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances required under sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes are verified at levels VII, IV, and II respectively. Delivery is required within 20 days FOB origin, with no variance allowed in quantity, and shipment must be transported by the fastest traceable means, excluding parcel post, to the specified vessel shipment address at Port Hueneme, California. The item is designated for U.S. Marine Corps Underwater Construction Team 2, with a required delivery date of July 17, 2026, and the contract is governed by federal procurement rules under NAICS code 332618, issued by the Department of Defense’s ASC Supplier OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336413
New
DIBBS
MULTIPLEXER SUBASSE
Solicitation # SPE4A5-26-T-319Z
Solicitation SPE4A5-26-T-319Z is an automated simplified acquisition issued by the DLA Aviation ASC Supplier Oper OEM Division for the procurement of five Multiplexer Subassemblies, identified by NSN 5895014264389 and part number 16E4004-809. The hardware is associated with manufacturers Centroid, Inc., Lockheed Martin Corporation, and Interconnect Wiring LLP. The required delivery date is September 27, 2027, with a delivery window of 411 days after the date of order. Shipping is designated as FOB Origin, with the final destination for both inspection and acceptance located at the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Key regulatory requirements include compliance with the Buy American and Balance of Payments Program (DFARS 252.225-7001) and safeguarding covered defense information per DFARS 252.204-7012. All quotes must be submitted through the DLA Internet Bid Board System (DIBBS), and electronic invoicing must be processed via the Wide Area WorkFlow (WAWF) system. This procurement is not a small business set-aside.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

5 days ago

DEADLINE

in about 9 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS