Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on September 3, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

TT2 SIMULATOR REPAIR, UPGRADE, & CALIBRATION

Awarded
FA8125-20-P-0108Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management & Training Corporation (MTC) is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The contractor is responsible for providing all transportation, labor, supervision, tools, and new manufacturer-specification parts required to diagnose and repair the clutch assembly and power take-off (PTO) system. The scope of work includes disassembling tractor components, replacing friction discs, bearings, oil seals, O-rings, and the clutch release spring, as well as resurfacing the flywheel and replacing necessary hydraulic pipes and filters. Final acceptance is contingent upon the Facility Maintenance Department verifying proper clutch engagement and PTO operation under load. This is a small business set-aside solicitation under NAICS code 811310, with award based on best value. Interested bidders must submit a bid sheet, a completed supplier packet including a W-9 and self-certification form, proof of insurance, and any applicable SBA certification letters to Angie Mahoney by 3:00 PM CST on November 3, 2026. The contract is subject to various federal regulations, including Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31, FAR standards for overtime compensation, Buy American requirements, and strict privacy and security protocols regarding non-public information.
Earle C. Clements Job Corps Center

POSTED

about 6 hours ago

DEADLINE

in 4 days
NAICS: 811310
New
SLED
Bus Fire Suppression System Maintenance
Solicitation # WMATA-0000010906
The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 30, 2026, with a strict response deadline of November 4, 2026. Interested parties must submit their responses by 7:00 PM on the closing date via the official supplier portal.
Washington Metropolitan Area Transit Authority

POSTED

about 6 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
Process Field Instrumentation & GaugesThis subcontract for Process Field Instrumentation and Gauges involves the supply and installation of critical process instrumentation, gauges, and sensors for prime contractors working on Porter-Tower Joint Municipal Authority WWTP projects in Schuylkill County, Pennsylvania. The scope of work includes the installation of pitot tube flow sensors, flow gage assemblies, diaphragm seals on non-potable water gauges, and full body line size pressure sensors on sludge piping, with the ultimate goal of delivering a fully installed and calibrated instrumentation system. The opportunity is categorized under NAICS code 811310 and was posted on October 30, 2026. Interested parties must submit their responses by the deadline of December 16, 2026, at 5:00 PM.
Schuylkill County

POSTED

about 8 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Conveyance Maintenance Services
Solicitation # 26-1336
Chicago Public Schools is soliciting bids for Conveyance Maintenance Services under solicitation number 26-1336 to implement a comprehensive preventive maintenance program for conveyance equipment. The selected bidder will provide all labor, materials, and supervision necessary to ensure equipment remains safe and operational, adhering to the City of Chicago Municipal Code, ASME A17.1/CSA B44, ASME A17.3, and original equipment manufacturer standards. The contract includes a three-year initial term with the possibility of two automatic renewals of two years each. Services involve monthly preventive maintenance during normal working hours from 6:00 a.m. to 2:30 p.m., as well as 24/7 emergency callback support. Key deliverables include site-specific maintenance schedules, the use of CPS facilities software for reporting, and an annual Executive Summary Report based on a 7-point assessment rubric. The agreement will be awarded to the lowest, responsive, and responsible bidder based on evaluation factors including price, business stability, professional qualifications, past performance, and capacity. Bidders must submit a comprehensive package via Bonfire, including an Excel-based bid tabulation, audited financial statements for the last three fiscal years, three non-Board references, and a W-9 tax form. Compliance with MBE/WBE aspirational goals of 30% and 7% respectively is required, along with adherence to the Illinois Minimum Wage Law and various federal and state non-discrimination acts. Invoicing must be submitted electronically in PDF format, with payments processed according to the Local Government Prompt Payment Act. All shipments are designated as F.O.B. destination. The deadline for questions is November 6, 2026, and the final response deadline is November 20, 2026.
Chicago Public Schools

POSTED

about 8 hours ago

DEADLINE

in 21 days
NAICS: 811310
New
SLED
Annual Inspection/Maint. and Repair on Generator at FMS #8
Solicitation # SRC0000037488
Solicitation SRC0000037488 is for the annual inspection, maintenance, and repair of a Speed Air air compressor (Model 1WD44, SN: D063475) at FMS #8 in Gadsden, Alabama. The scope of work includes replacing belts, collecting oil samples, and installing filters, cabinet filter mats, and repair kits for the oil and thermostatic valves. A mandatory site visit is required on November 18, 2026, at 10:00 AM at 5319 Airport Road, Gadsden, Alabama. The response deadline is November 23, 2026, and all bids must be submitted electronically through the Alabama Buys portal. The contract is managed by the Army MCA and the State of Alabama, with a maximum total value of 25,000 dollars over a potential five-year period, subject to annual renewals. Award evaluation will be based on price reasonableness, cost realism, and supplier qualifications, including professional licenses and insurance. Vendors must comply with the Code of Alabama, including the Beason-Hammon Alabama Taxpayer and Citizen Protection Act and registration requirements for foreign corporations. Payment will be handled electronically via P-cards, EFT, or state-issued credit cards. Final acceptance of services is contingent upon a satisfactory inspection by the State of Alabama in accordance with the Universal Commerce Code.
Army MCA_App 01_Real Property Operations & Maintenance, State Military Department

POSTED

about 9 hours ago

DEADLINE

in 23 days
NAICS: 811310
New
DIBBS
MIL-STD-1330D Oxygen Cleaning ServicesThis subcontract for the Defense Logistics Agency involves providing specialized cleaning and drying services for oxygen system components. The primary objective is to support prime contractors by ensuring all components are free of hydrocarbons and contaminants to prevent combustion in high-pressure environments. All work must be executed within certified oxygen-cleaning facilities using approved solvents in strict accordance with MIL-STD-1330D standards. The project falls under NAICS code 811310 and requires the delivery of certified Oxygen Clean components. Interested parties should note the response deadline of November 7, 2026, for this Department of Defense requirement.
Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

in 8 days
NAICS: 811310
New
SLED
Boiler and Refractory Repair Services
Solicitation # TAMU-RFP-27-5144
Texas A&M University Procurement Services has issued solicitation TAMU-RFP-27-5144 for Boiler and Refractory Repair Services to be performed in Texas. This SLED organization is seeking qualified vendors to provide specialized repair services, with the official solicitation posted on October 30, 2026. The deadline for responses is November 18, 2026, by 8:00 PM UTC, though the procurement guidelines specify that submissions must be received by 2:00 PM CST on the closing date to be considered. Interested bidders must register and submit their proposals electronically through the AggieBid portal at aggiebidprod.tamu.edu, as no further documentation will be posted to the Electronic State Business Daily. All proposal information should be factual, clear, and concise. For further inquiries, the primary point of contact is Jim Nelms.
Texas A&M University

POSTED

about 13 hours ago

DEADLINE

in 19 days
NAICS: 811310
New
SLED
Boiler Combustion Analysis and Control TuningThis subcontract for Boiler Combustion Analysis and Control Tuning involves providing specialized calibration and tuning services for boiler combustion systems on Texas A&M University projects. The selected contractor will work under prime contractors to adjust air-to-fuel ratios, calibrate control sensors, and ensure strict adherence to EPA emissions standards using flue gas meters and combustion analyzers. The final deliverables for this engagement include a comprehensive combustion analysis report and a fully tuned control system. To qualify for this role, contractors must hold manufacturer-specific control system certifications. The opportunity was posted on October 30, 2026, with a response deadline of November 18, 2026. This project falls under NAICS code 811310 and is managed through the Texas A&M University procurement system.
Texas A&M University

POSTED

about 13 hours ago

DEADLINE

in 19 days
NAICS: 811310
New
SLED
Boiler & Refractory Repairs Services
Solicitation # TAMU-RFP-27-5144
Texas A&M University is soliciting proposals under RFP TAMU-RFP-27-5144 to establish a Master Order for Boiler and Refractory Services to be performed at its campus in College Station, Texas. The solicitation period opens on October 30, 2026, and closes on November 18, 2026, at 2:00 PM CST. All responses must be submitted electronically through the AggieBid portal, and vendors are required to adhere to the terms and conditions specified within that system and the university's official purchasing guidelines. While the primary solicitation establishes the intent to secure these services, detailed technical specifications, deliverables, and performance outputs are contained within attachments available exclusively through the AggieBid portal. Interested parties may direct inquiries to the buyer at [email hidden] or contact Jim Nelms. No specific contract value, period of performance, or evaluation criteria were provided in the initial solicitation documents.
Texas A&M University

POSTED

about 13 hours ago

DEADLINE

in 19 days
NAICS: 811310
New
SLED
Chiller Maintenance Services
Solicitation # 26FS0006
Solicitation 26FS0006 is an Invitation for Bid issued by the California Department of Veterans Affairs (CalVet) for comprehensive maintenance and emergency repair services for chillers, Liebert units, and cooling towers at the Veterans Home of California-Fresno. The contract period is scheduled from January 1, 2027, through June 30, 2030. The scope of work includes annual and quarterly preventive maintenance, one-time evaporator tube cleaning and eddy current testing, and emergency repair services with a required two-hour response time. Key deliverables include annual leak detection reports per AQMD requirements and yearly oil sample lab analysis reports. The contract will be awarded to the lowest responsible bidder who complies with all requirements. Evaluation factors include price, responsibility, and responsiveness, with specific incentives and preferences applied for Disabled Veteran Business Enterprises (DVBE) and certified Small or Micro businesses. To be eligible, contractors must maintain an active C-20 license and technicians must hold EPA Section 608 Universal Technician Certification. Bidders are required to submit a mandatory Rate Sheet, signed Contractor Certification Clauses, and a Bidder Certification via email to Eric Dahmen by the November 4, 2026, deadline. Awarded contractors must adhere to prevailing wage laws under Labor Code Section 1770 and comply with all site security and health requirements at the Fresno facility.
California Department of Veterans Affairs

POSTED

about 13 hours ago

DEADLINE

in 4 days
NAICS: 811310
New
SLED
School Bus Maintenance and RepairThis subcontract for School Bus Maintenance and Repair supports the City of Westfield Public Schools by providing essential mechanical services for transportation projects. The scope of work includes performing preventative maintenance, state-mandated safety inspections, and emergency roadside repairs to ensure the vehicle fleet remains safe and operable according to DOT standards. All work must be conducted using heavy-duty vehicle lifts and diagnostic tools by ASE certified technicians. The project is located in Westfield, Massachusetts, with a response deadline of November 20, 2026. Falling under NAICS code 811310, this opportunity requires a qualified provider to maintain high safety and operational standards for the city's student transportation infrastructure.
City of Westfield

POSTED

about 14 hours ago

DEADLINE

in 20 days
NAICS: 811310
New
SLED
Well Pump & Motor ServicesThis subcontract for Well Pump and Motor Services involves providing specialized inspection, repair, and installation services for prime contractors working on City of Riverside Public Utilities projects. The scope of work includes the removal of existing pumps, the refurbishment of motors, and the installation of new or repaired systems guided by Pump Recommendation reports. To ensure quality and safety, the contractor must utilize NSF-certified pump components and appropriate pump hoisting equipment to deliver fully operational and tested systems. The project is located in San Bernardino, California, under NAICS code 811310. Interested parties must submit their responses by the deadline of November 20, 2026.
City of Riverside

POSTED

about 15 hours ago

DEADLINE

in 21 days

AI Contract Overview

Show more

Contract FA8125-20-P-0108 is a firm-fixed-price award issued by the Department of Defense, specifically through the AFSC PZIMA office, for the repair, upgrade, and calibration of a TT2 Simulator. The contract was awarded on September 3, 2020, for a total value of 10,575.00 dollars. The scope of work is categorized under NAICS code 811310 and includes strict adherence to packaging requirements and applicable FAR and DFARS clauses. The period of performance for this project spans from September 4, 2020, to December 4, 2020. All services and deliverables are to be completed and delivered to Tinker AFB in Oklahoma. Primary points of contact for the administration of this contract are Amanda Payne and Rochanda Taylor.

General Info

Agency

Department Of Defense → FA8125 Afsc Pzima

Contract Value

$10,575

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Tinker AFB, OK, 73145, USA

Set-Aside

NONE

Awardee

VALUE TOOL & ENGINEERING INC

Award Issued Date

Documents

1
PDF, High priority: read this firstaward
High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8125 Afsc Pzima
Contacts2 people available
OfficeTINKER AFB, OK, 73145-3303, USA
Organization / AgencyDepartment Of Defense → FA8125 Afsc Pzima
Office AddressTINKER AFB, OK, 73145-3303, USA
Contacts
Amanda Payne
contact@example.gov
+1 (555) 000-0000
Rochanda Taylor
contact@example.gov
+1 (555) 000-0000

More opportunities from Department Of Defense → FA8125 Afsc Pzima

Same awarding agency

NAICS: 334515
New
Federal
Upgrade X-Ray Controller
Solicitation # C27-003
The 76 CMXG is seeking the procurement of an upgraded X-ray controller and automated equipment that meets AIR FORCE T.O 33B-1-2 standards and is equivalent to the X-Ray Apparatus Set. The required system must include hardware such as new servo motors, drives, and operator control interfaces, alongside programmable motion control software based on Parker Motion Systems libraries. This software must support custom motion programs, automatic inspection positioning, and digital image capture, while integrating with the existing Vecow PC and cmTent imaging software. The contract includes requirements for the removal and disposal of existing equipment, as well as the installation and testing of the new system over a period of up to two days onsite. The vendor must provide a minimum of four hours of operator and maintenance training and deliver three complete sets of engineering manuals containing schematics and troubleshooting guides. This presolicitation, identified by solicitation number C27-003, is managed by the Department of Defense at Tinker AFB, Oklahoma, with a response deadline of November 5, 2026.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 423430
New
Federal
Workstation PC SupplierThis subcontract opportunity, titled Workstation PC Supplier, involves providing computing hardware and operating systems to prime contractors supporting Air Force Sustainment Center projects under the Department of Defense. The scope of work requires the delivery of desktop PCs specifically compatible with laser solid-state control systems, ensuring each unit includes the necessary installed operating systems and Ethernet connectivity for seamless network integration. The procurement is categorized under NAICS code 423430 and is associated with agency FA8125 Afsc Pzima. Interested parties must note the response deadline of November 10, 2026, with the place of performance located in zip code 73145.
Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

4 days ago

DEADLINE

in 10 days
View Details
NAICS: 333998
New
Federal
Fiber Laser Metal Marking Workstation SupplierThis subcontract involves the procurement of two compact, benchtop fiber laser marking workstations to support prime contractors on Air Force Sustainment Center projects. The required equipment must feature 20W Variable-Pulsed MOPA Lasers with a 1064nm wavelength, air cooling, and solid-state control systems equipped with Class II 635nm laser diodes. The supplier is responsible for providing all necessary manufacturer literature and ensuring a two-year warranty for the hardware. The contract mandates the delivery of two fully operational marking tools FOB Destination to Tinker AFB in Oklahoma. Managed by the Department of Defense under agency FA8125 Afsc Pzima, the opportunity falls under NAICS code 333998. Responses are due by November 10, 2026.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

4 days ago

DEADLINE

in 10 days
View Details
NAICS: 333517
New
Federal
A27-017 Fiber Laser Metal Marking Tool
Solicitation # FA812527Q0006
Solicitation FA812527Q0006 is a Firm Fixed Price contract issued by the Air Force Sustainment Center's Maintenance Contracting Branch at Tinker AFB, Oklahoma. The Department of Defense is seeking the procurement of two compact, benchtop fiber laser metal marking workstations, such as the Brady Lightwriter or an equivalent. These industrial tools are required to create high-resolution, machine-readable identifiers, including 2D barcodes and permanent text, on various metal tools and tags. Key technical specifications include a 20W variable-pulsed MOPA laser with a 1064nm wavelength, a solid state control system, a pulse range of 1-350ns, and a Class II 635nm laser diode. The equipment must include a two-year warranty, and while a PC is optional, the units must feature available Ethernet ports. The contract will be awarded based on the Lowest Price Technically Acceptable (LPTA) basis. Offerors must submit a completed quote sheet and provide comprehensive manufacturer literature, data sheets, or certifications to demonstrate that the equipment meets all salient characteristics. Quotes are due by November 10, 2026, and must be submitted via email to the designated contract specialist and contracting officer. Shipping is designated as FOB Destination to Tinker AFB, and all freight costs must be included in the quoted price. Payment will be processed through the Wide Area Workflow (WAWF) application with default Net 30 terms upon government acceptance of the items.
Machine Tool Manufacturing

POSTED

4 days ago

DEADLINE

in 10 days
View Details
NAICS: 334519
New
Federal
A27-022 Videoscope
Solicitation # FA812527Q0004
Solicitation FA812527Q0004 is a Total Small Business Set-Aside for a Firm Fixed Price contract to procure commercial off-the-shelf Industrial HD articulating 4mm videoscopes for the Air Force Sustainment Center at Tinker AFB, Oklahoma. These devices are used for engine inspections to identify imperfections and foreign object debris. The requirement specifies a system with a 3 to 6 meter insertion tube, 4-way 120-degree articulation controlled by a joystick, and a 6.5 to 12 inch backlit color touchscreen display with a minimum resolution of 1,920 x 1,080 pixels. Key capabilities include 3D surface modeling, live measurements, battery power, and support for JPEG and MP4 formats, with a total system weight not exceeding 20 pounds. Award will be based on the Lowest Price Technically Acceptable (LPTA) criteria, evaluating whether the offered item meets all minimum salient characteristics and technical specifications. Offerors must provide manufacturer literature and certifications to demonstrate compliance. Quotes are due by November 2026 and must be submitted via email to the designated contract specialists. Delivery is required FOB Destination to Tinker AFB, and all shipping costs must be included in the quoted price. Invoicing and payments will be processed through the Wide Area Workflow application with default Net 30 terms.
Other Measuring and Controlling Device Manufacturing

POSTED

4 days ago

DEADLINE

in 11 days
View Details
NAICS: 488190
Federal
Advanced Fuel Accessories Test System (AFATS) 02-02 Upgrades
Solicitation # H7TC13
The Air Force is seeking a small business contractor to perform upgrades on the Advanced Fuel Accessories Test System (AFATS) 02-02 Test Stand and its associated calibration cart at Tinker AFB, Oklahoma. The primary objective is to replace obsolete Honeywell doser modules, instruments, sensors, and AC/DC power supplies with commercial off-the-shelf (COTS) equivalents. The upgraded system will be used to test fuel flow proportioners, float valves, refueling receptacles, and transfer pumps. The project includes the delivery of upgraded hardware, comprehensive training on maintenance and calibration, and the provision of all necessary components and parts. This is a firm-fixed-price effort under NAICS 488190, with final acceptance conducted at Tinker AFB following successful functional testing, AFMETCAL certification, and the submission of detailed validation and vibration reports. The contractor is responsible for the packaging and shipping of government furnished property at their own expense and must adhere to strict technical standards, including MIL-STD-461E for EMI controls and NFPA 70 Article 500 for electrical safety in hazardous environments. Key deliverables follow a strict timeline after the date of contract, including a Preliminary Design Review by 60 days, an Intermediate Design Review by 75 days, and a Critical Design Review by 90 days. High security and quality standards are mandated, including NIST SP 800-161 for supply chain risk management, Section 889 NDAA compliance, and a minimum 730-day warranty on all equipment and workmanship. Proposals must demonstrate past performance on similar fuel or hydraulic test stand projects and confirm the availability of a National Instruments Certified LabVIEW Architect and a Mechanical Engineer.
Other Support Activities for Air Transportation

POSTED

8 days ago

DEADLINE

in 6 days
View Details
NAICS: 339999
Federal
UID Marking and Labeling SpecialistThis subcontract opportunity is for a UID Marking and Labeling Specialist to support prime contractors on Department of the Air Force projects under the Department of Defense. The selected provider will be responsible for the physical marking of equipment using laser etching or data matrix tags to apply Unique Item Identifiers. Additionally, the contractor must handle data registration using specialized software to ensure full compliance with MIL-STD-130 and MIL-STD-129 standards, concluding each task with the delivery of marked equipment and a completed Material Inspection and Receiving Report. The project is designated as a Total Small Business Set Aside under NAICS code 339999. Interested parties must submit their responses by November 4, 2026, at 6:00 PM. The work is associated with agency FA8125 Afsc Pzima and will be performed in the 73145 zip code area.
All Other Miscellaneous Manufacturing

POSTED

10 days ago

DEADLINE

in 5 days
View Details
NAICS: 333924
Federal
Seated Electric Towing Tractor SupplierThis small business set-aside subcontract, managed by the Department of Defense for the Department of the Air Force, requires the procurement of one fully operational seated electric towing tractor. The selected supplier is responsible for manufacturing or sourcing the vehicle to meet specific technical criteria outlined in CLIN 0001, with delivery provided FOB Destination. Compliance with MIL-STD-130 and MIL-STD-129 is mandatory for all marking and labeling. Additionally, the contractor must provide Unique Item Identifiers for any units with a cost of 5,000 dollars or more. The opportunity is categorized under NAICS code 333924 and is associated with agency FA8125 Afsc Pzima.
Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

10 days ago

DEADLINE

in 5 days
View Details
NAICS: 334519
Federal
Industrial HD Articulating Videoscope SupplierThis subcontract opportunity is for the supply of a complete, battery-powered industrial HD articulating videoscope system to support prime contractors on Air Force projects at Tinker AFB. The required system must feature a 4mm probe with four-way, 120-degree joystick articulation and a 3D modeling display. Technical specifications mandate that the equipment weighs less than 20 lbs, maintains an IP54 ingress-protection rating, and is fully TAA compliant. Managed by the Department of Defense under agency FA8125 Afsc Pzima, this procurement is designated as a Total Small Business Set Aside under NAICS code 334519. The solicitation was posted on October 21, 2026, with a response deadline of November 4, 2026. The contract entails the delivery of one complete industrial HD articulating videoscope system to be utilized at the specified performance location.
Other Measuring and Controlling Device Manufacturing

POSTED

10 days ago

DEADLINE

in 4 days
View Details
NAICS: 333924
Federal
Electric Tow Tractor
Solicitation # FA812527Q0005
Solicitation FA812527Q0005 is a firm fixed price request for the procurement of one seated, battery-powered electric tow tractor for delivery to Tinker AFB, Oklahoma. This opportunity is specifically set aside for Women-Owned Small Businesses and Economically Disadvantaged Women-Owned Small Businesses under NAICS code 333924. The government will award the contract to the responsible offeror who is technically acceptable and provides the lowest total evaluated price, evaluating the three lowest-priced proposals concurrently. The required vehicle must feature a tricycle wheel configuration, solid pneumatic tires, and a clevis pin style hitch with a quick-release bar. Technical specifications include a tow rating between 12,000 and 16,000 pounds, a minimum top speed of 6 mph, and the ability to maintain at least 3 mph while towing a 6,000 pound load. The tractor must not exceed dimensions of 85 inches long, 40 inches wide, and 55 inches high, and must operate effectively in temperatures from 15 to 100 degrees Fahrenheit. Safety requirements include a foot brake, parking brake, high visibility lighting, an audible backup alarm, and a horn. The unit must be delivered with a battery rated for at least 6 hours of use and be compatible with a 48V charger using an Anderson Connector. Offerors must submit a detailed written statement explaining how they meet all technical criteria, as simple statements of concurrence are not acceptable. The proposal must include completed company information, CAGE code, and wet signatures on Standard Form 1449, along with pricing and delivery timelines. The contractor is responsible for providing Unique Item Identifiers for items costing $5,000 or more and must adhere to MIL-STD-130 and MIL-STD-129 for marking and labeling. Invoicing and payment will be processed electronically via Wide Area WorkFlow.
Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

10 days ago

DEADLINE

in 5 days
View Details
NAICS: 325520
Federal
Vehicle Recompete: CYTEC FROZEN MATERIAL BPA — BPA FA812523Q0005The Cytec Frozen Material Blanket Purchase Agreement, managed by the Department of the Air Force under vehicle FA812523Q0005, is an active procurement vehicle with an ordering period extending through January 3, 2028. The contract currently supports seven active task orders with a total combined value of 1,847,267.59 dollars. This vehicle was established through a single solicitation that resulted in three specific awards. Two companies currently serve as incumbents on this vehicle. FirstKem LLC holds three orders totaling 1,009,425.40 dollars, while IGCS, LLC holds four orders totaling 837,842.19 dollars. The highest individual task order value is 558,603.40 dollars awarded to FirstKem LLC. There is a medium confidence level that this contract will be subject to a recompete in the future.
Adhesive Manufacturing

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 541511
Federal
Software Integration & Compatibility AssuranceThe contract involves the integration of AVEVA software with a combination of 21 newly procured computers and 26 existing test stations, requiring full configuration, rigorous testing, and thorough validation to ensure seamless compatibility and operational reliability. The work focuses on aligning the software environment with physical hardware infrastructure to maintain consistent performance across all systems, with particular attention to precision and stability in test station environments. The project is classified under NAICS code 541511 and is structured as a subcontract under the Department of Defense, specifically managed by FA8125 Afsc Pzima, with performance taking place in Coffeyville, Oklahoma, at the zip code 73145. The contract was posted on May 11, 2026, and is part of a broader initiative to enhance testing capabilities through software modernization and system harmonization.
Custom Computer Programming Services

POSTED

6 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 811310
Closed
Federal
JLG Service Contract
Solicitation # W50S8L-20-Q-5043
W7NA Uspfo Activity Kyang 123

POSTED

about 6 years ago

CLOSED

about 6 years ago
View Details
NAICS: 811310
Closed
Federal
MAA Pressurization Units
Solicitation # 1300880357
Naval Air Warfare Center Air Division

POSTED

about 6 years ago

CLOSED

about 6 years ago
View Details
NAICS: 811310
Closed
Federal
AGE Equipment Painting
Solicitation # FA468620R0008
FA4686 9 Cons Pk

POSTED

about 6 years ago

CLOSED

about 6 years ago
View Details
NAICS: 811310
Closed
Federal
Overhaul, update, and modify the Brown and Sharpe 1440 Cylindrical Grinder
Solicitation # N6833520Q0176
Navair Warfare Ctr Aircraft Division

POSTED

about 6 years ago

CLOSED

about 6 years ago
View Details
NAICS: 811310
Closed
Federal
Exhaust Motor Replacement
Solicitation # N0042120Q0536
Naval Air Warfare Center Air Division

POSTED

about 6 years ago

CLOSED

about 6 years ago
View Details
NAICS: 811310
Awarded
Federal
X-Ray Maintenance and Repair Services (CONUS/OCONUS)
Solicitation # 15M20020QA32OS005
USMS Ofc Security Contracts US DOJ

POSTED

about 6 years ago

CLOSED

about 6 years ago
View Details
NAICS: 811310
Awarded
Federal
Uninterrupted preventive maintenance and routine and emergency repairs of commissary facilities and equipment at DeCA commissaries located in Germany.
Solicitation # HQC010-20-13-A0001
Defense Commissary Agency- Eur Area

POSTED

about 6 years ago

DEADLINE

N/A
View Details
NAICS: 811310
Awarded
Federal
36--Sanitize and Disinfect System
Solicitation # DJA-20-ALAD-PR-0002
ATF

POSTED

about 6 years ago

CLOSED

about 6 years ago
View Details
NAICS: 811310
Closed
Federal
Generator Maintenance
Solicitation # 12505B20S1009131-1
USDA Ars Mwa Aao Acq/per Prop

POSTED

about 6 years ago

CLOSED

about 6 years ago
View Details
NAICS: 811310
Awarded
Federal
Uninterrupted preventive maintenance and routine and emergency repairs of commissary facilities and equipment at DeCA commissaries located in Germany, Belgium, and the Netherlands.
Solicitation # HQC010-20-12-A0001
Defense Commissary Agency- Eur Area

POSTED

about 6 years ago

DEADLINE

N/A
View Details
NAICS: 811310
Awarded
Federal
J041--509-21-1-5102-0047 Preventive Maintenance on Water Chillers - Base Plus Option Years (VA-20-00078490)
Solicitation # 36C24720Q1153
247-NETWORK Contract Office 7 (36C247)

POSTED

about 6 years ago

CLOSED

about 6 years ago
View Details
NAICS: 811310
Awarded
Federal
Yaquina Propeller Repair
Solicitation # W9127N20Q0123
W071 Endist Portland

POSTED

about 6 years ago

CLOSED

about 6 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS