Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TUBE, METALLIC

Active
SPE7M4-26-T-379UFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of 7,551 feet of metallic square or rectangular tubing, measuring 1 inch square with a 0.125 inch wall thickness and 24 feet in length. The material must be Type 2 (A.W.C.R.) and conform to ASTM A513 Grade MT 1010 to MT 1020. Each tube requires specific stenciling or labeling every three feet, including the NSN, DLA contract number, lot/heat, and grade. The procurement is designated as a critical application item and must adhere to strict mercury-free requirements and metal certification data requirements. Delivery is set for 253 days after order, with a required delivery date of August 26, 2026, shipped FOB Origin to the DLA Distribution New Cumberland facility. Packaging and palletization must comply with MIL-STD-2073-1E and RP001, with a maximum master lift weight of 2,000 pounds. The contract allows for a quantity variance of plus or minus 10 percent and is subject to destination inspection and acceptance.

General Info

Procurement of 7,551 feet of metallic tubing delivered to DLA by August 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

331210 - Iron and Steel Pipe and Tube Manufacturing from Purchased SteelView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

(1)

SPE7M4-26-T-379U Request for Quotations

PDF•19 pages•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUSA
Contacts
Rory O'Reilly
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TUBE,METALLIC
TUBE, METALLIC
SQUARE/RECTANGULAR
1 INCH SQUARE,
0.125 INCH WALL THICKNESS,
24 FEET LONG,
TYPE 2 (A.W.C.R.),
FLASH IN,
ASTM A513 GRADE MT 1010 TO MT 1020
EACH TUBE HAS TO BE MARKED EVERY THREE FEET BY STENCILING OR PLASTIC
LABELS WITH THE FOLLOWING INFORMATION:
NSN
DLA CONTRACT NUMBER
LOT/HEAT
A513 AND GRADE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FULL AND OPEN COMPETITION APPLY
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
SPE7M4-26-T-379U
SECTION B
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2 IAW BASIC NON GOVT STD ASTM A513/A513M-24 REVISION NR DTD 05/01/2024 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018059280 0001 FT 7,551.000
NSN/MATERIAL:4710010841168
DELIVERY (IN DAYS):0253
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:BLK PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:00 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Exception: STD pipe/ tubing 1.5 in. and smaller does not require bundling. Larger size shall require a suitable secured bundle. EA. master lift shall be limited to 2,000 Lbs.gross wt. Use of wood box is optional.
PARCEL POST ADDRESS:
W25G1U
SPE7M4-26-T-379U
SECTION B
PR: 7018059280 PRLI: 0001 CONT’D
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:00/00/0000 Original Required Delivery Date:08/26/2026
SPE7M4-26-T-379U NSN/Part Number: 4710-01-084-1168 Quantity: 7,551 FT Purchase Request: 7018059280QTY: 7551 Delivery: 253 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M1-26-U-5674
This contract is for the procurement of 591 lengths of seamless plain round metallic tubing, each 6 feet long. The tubing must be 6061 alloy T6 temper with a 0.375 inch outer diameter and a 0.035 inch wall thickness, capable of withstanding 3000 pounds per square inch. Delivery is required within 122 days, with inspection and acceptance occurring at the origin. The supplier must adhere to strict quality and environmental standards, including the prohibition of Class I ozone-depleting chemicals and the intentional addition of mercury. Packaging and marking must comply with MIL-STD-129 and DLA requirements, ensuring each unit package includes the NSN, contract number, lot number, and relevant CAGE codes. Metal certification and technical data requirements are governed by SAE AMS4083N and the DLA Master List of Technical and Quality Requirements.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 331210
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-379N
This solicitation is for the procurement of six metal tube assemblies under solicitation number SPE7M4-26-T-379N for the Department of Defense Fluid Handling Division. The contract is a total small business set-aside under NAICS code 331210, with a delivery requirement of 254 days after order. Performance is located at Hill AFB. The item is designated as a restricted source item requiring engineering source approval by the government design control activity. Compliance with DLA packaging requirements, CMMC Level 2 self-assessment, and covered defense information regulations is mandatory. Alternate offerors must provide extensive documentation, including detailed drawings, process sheets, and shock extension reports. If reverse engineering was utilized, a comprehensive analysis report detailing the development process and data compilation is required for engineering support review.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-379Y
This contract is for the procurement of seamless, drawn, round aluminum alloy tubing (6061-T6) with a 5/8 inch outer diameter and 0.035 inch wall thickness. The material is designated for use in various aircraft and helicopters, including the F-4 Phantom, CH-47 Chinook, F-111, F-15 Eagle, A-10 Thunderbolt II, and F-16. The total requirement consists of two line items totaling 1,180 feet, with 531 feet destined for DLA Distribution Depot Hill and 649 feet for DLA Distribution Warner Robins. Key requirements include adherence to SAE-AMS-STD-185 and ASTM B660 for preservation and packaging, with a strict prohibition on the use of class I ozone-depleting chemicals. Inspection and acceptance are to take place at the destination, following specific sampling methods such as MIL-STD-1916 or ASQ H1331. The contract specifies a delivery window of 65 days after order, with a quantity variance allowance of plus or minus 10 percent. Metal certification and technical data packages are mandatory for this critical application item.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M1-26-U-5675
This contract, solicitation number SPE7M1-26-U-5675, is for the procurement of 2,243 feet of cold drawn metallic steel tubing with a 0.375 inch outer diameter and 0.020 inch wall thickness. The tubing must be provided in random lengths between 10 and 24 feet and comply with SAE AMS specifications for high-pressure hydraulic UNS S21900 corrosion and heat-resistant steel. This is identified as a critical application item, requiring strict adherence to SAE AMS 2807 for marking and specific metal certification requirements. The procurement is a HUBZone set-aside under NAICS code 331210, managed by the Department of Defense Maritime Supply Chain. Delivery is required within 166 days FOB origin, with a quantity variance allowance of plus or minus 10 percent. Quality assurance involves origin inspection and acceptance using sampling methods consistent with MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, and each unit package must be clearly marked with the NSN, contract number, lot number, and applicable CAGE codes.
MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 14 days
View Details
NAICS: 331210
New
DIBBS
PIPE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-380L
This contract is for the procurement of metal pipe assemblies, identified by NSN 4710015285678, to be sourced through Hyspan Precision Products Inc. The requirement is split across three line items with a total quantity of six units, distributed as three units for PR 7016442613, two units for PR 7016312051, and one unit for PR 7016312050. All items are to be delivered FOB Destination to the USS Michael Monsoor DDG 1001, with a delivery window of 20 days and required delivery dates in April 2026. The contract mandates strict adherence to DLA packaging and palletization requirements, specifically MIL-STD-2073-1E and MIL-STD-129 for marking. A critical environmental restriction prohibits the use of Class I ozone-depleting chemicals in the delivered items. Shipments must be made via the fastest traceable means, specifically excluding parcel post, and must comply with the technical and quality requirements set forth in the DLA Master List.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331210
New
DIBBS
DISPLACEMENT AND EVACU
Solicitation # SPE8EE-26-T-2481
Solicitation SPE8EE-26-T-2481 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of one Displacement and Evacuation Kit, Hoseline, identified by NSN 3835-01-414-1870. The procurement is managed under the First Destination Transportation program with delivery required to DLA Distribution San Joaquin in Tracy, California. The need ship date is March 1, 2027, with an original required delivery date of June 13, 2027. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. The contract imposes stringent technical and security requirements, including CMMC Level 2 certification and compliance with ITAR and EAR export controls. Eligible offerors must possess an approved US/Canada Joint Certification Program certification to access export-controlled technical data. Additionally, the solicitation incorporates the Buy American Act and Berry Amendment restrictions, and prohibits the use of additive manufacturing unless specifically authorized. Award evaluation includes a price preference for certified HUBZone Small Business Concerns. Packaging and marking must adhere to MIL-STD-129 and DLA master technical requirements, with specific hazard labeling required for any hazardous materials delivered.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 21 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-380B
This solicitation, identified as SPE7M4-26-T-380B and issued by the Department of Defense Fluid Handling Division, is for the procurement of 398 units of metallic tubes specifically designated as wire guide afterbody tubes under NSN 4710-01-460-3119. The contract requires delivery within 140 days after the order is placed, with the place of performance located in Tracy, California. The acquisition falls under NAICS code 331210 and is managed by the Defense Logistics Agency. The contract is subject to strict technical and quality requirements as outlined in the DLA Master List. Furthermore, the item is governed by export control regulations under ITAR and EAR, meaning technical data cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Department of Commerce. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed mandatory export-control training.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-T-379X
This contract is a solicitation issued by the Department of Defense Fluid Handling Division for 161 feet of seamless round aluminum alloy 5052 metallic tubing. The tubing must have a 3.000 inch outer diameter, a 0.035 inch wall thickness, plain ends, and be provided in random lengths between 10 and 12 feet with temper 0, type 1, in accordance with SAE AMS specifications. The items are identified as commercial and require continuous product marking. Delivery is required within 140 days after order. Strict quality and documentation requirements are in place, including the mandatory inclusion of a metal certification copy with each shipment and the retention of these records by the contractor for five to ten years. A Certificate of Quality Compliance is required for each manufacturing lot and must be uploaded to the iRAPT system. The procurement adheres to specific DLA technical and quality requirements, including the prohibition of class I ozone depleting chemicals and adherence to MIL-STD-1916 or ASQ H1331 sampling methods. This solicitation is open for full and open competition.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
Federal
BFO_AML STEEL SUPPLIES
Solicitation # 140L4326Q0119
The BFO_AML STEEL SUPPLIES solicitation, identified by number 140L4326Q0119, is issued by the Department of the Interior through the Oregon State Office located in Portland, Oregon. This procurement opportunity is designated as a total set-aside for small businesses under NAICS code 331210. The solicitation was posted on September 2, 2026, with a response deadline of September 12, 2026. Interested parties may contact Matthew Duane as the primary point of contact for further information regarding this requirement.
Oregon State Office

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 331210
New
DIBBS
Supply of Aerospace-Grade Metal Tubing
FLUID HANDLING DIVISION

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 331210
New
DIBBS
TUBE, METALLIC
Solicitation # SPE7M4-26-Q-1008
This contract is a solicitation for the procurement of two metallic tubes made from a copper-nickel alloy, identified by NSN 4710-01-342-8470. The items are designated as critical application items with threaded ends for use in Air Section 1. The delivery requirement is set for 222 days after the order, with a material need date of December 25, 2026. Inspection and acceptance will take place at the destination, while the shipping terms are FOB Origin. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It explicitly prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications. The supplies are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Technical and quality requirements are governed by the DLA Master List, and the contract includes specific provisions for the removal of government identification from non-accepted supplies.
FLUID HANDLING DIVISION

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 331210
New
Federal
Specialized Material Supply for Actuator Fabrication
SPRMM1 DLA Mechanicsburg

POSTED

2 days ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 332999
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M4-26-T-380C
This contract is for the procurement of nonmetallic hose assemblies with a 1-3/8 inch inner diameter and a length of 35 1/2 inches. The assemblies must feature aluminum fittings as specified in MS24587 and MS28741. Key technical requirements include 100% acceptance testing per SQAPMIL-DTL-8795 and strict adherence to QPL/QML specifications for all components. The items are designated as critical application items and must be delivered in straight lengths, as they cannot be bent or folded. The agreement specifies a non-extendable shelf life of 120 months, requiring precise markings per MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan. Delivery is set as FOB Origin with a 20-day lead time, shipping to Dyess AFB via traceable means. The contract also includes a First Article Test requirement and prohibits the use of Class I ozone-depleting chemicals.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE7M4-26-T-379W
This solicitation, issued by the Department of Defense Fluid Handling Division under solicitation number SPE7M4-26-T-379W, is for the procurement of five helical compression springs, identified by NSN 5360-00-167-5336. The contract requires delivery within 112 days after the order is received and is categorized under NAICS code 332613. Performance is designated for Phoenix, Arizona. The contract includes strict compliance requirements, including CMMC Level 2 certification for third-party assessment and adherence to DLA packaging and quality standards. Notably, the item is subject to export control under ITAR or EAR regulations, meaning technical data cannot be shared with foreign persons without prior authorization. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training.
Spring Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-379G
Solicitation SPE7M4-26-T-379G, issued by the DLA Land and Maritime Fluid Handling Division, is a fixed-price procurement for seven non-metallic aviation fueling hose assemblies (NSN 4720-01-243-4836). The items must be delivered FOB Origin to the DLA Distribution Depot at Tinker AFB, Oklahoma, with a delivery window of 419 days. The procurement is subject to full and open competition, with quotes due by September 14, 2026. Technical compliance is governed by API Standard 1529, and the contract requires a First Article Test (FAT) and a hydrostatic test certificate for every hose assembly. Quality assurance involves origin inspection and acceptance, with sampling conducted per MIL-STD-1916 or ASQ H1331. The items are designated as Type I (Code W) with a non-extendable shelf life of 120 months. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. Payment and receiving reports are to be processed electronically via Wide Area WorkFlow.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332312
New
DIBBS
FITTING, STRUCTURAL COM
Solicitation # SPE7M4-26-Q-1015
This contract is a firm fixed price solicitation for 28 units of structural component fittings for a liquid oxygen converter, identified as NSN 1560-01-374-2342. The items are designated as Navy Critical Safety Items and Critical Application Items, requiring strict adherence to SAE AS9100 quality standards and CMMC Level 2 cybersecurity self-assessment. Delivery is required within 230 days after the order is placed, with inspection and acceptance occurring at the origin. The agreement mandates rigorous packaging and cleaning standards, specifically requiring oxygen clean packaging and marking per MIL-STD-1330 and MIL-STD-129. Prohibitions are in place against the use of Class I ozone depleting chemicals. All shipments must be delivered to the DLA Distribution DDSP New Cumberland facility, and any requests for waivers or deviations must be approved by the DSC contracting officer.
Fabricated Structural Metal Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332313
New
DIBBS
PLATE, STATOR, BARRIE
Solicitation # SPE7M4-26-Q-1014
Solicitation SPE7M4-26-Q-1014 is a firm fixed price request for five units of Plate, Stator, Barrier (NSN 1710-00-458-2633) for the Department of Defense Fluid Handling Division. This item is designated as an Air Force Critical Safety Item and a Critical Application Item, requiring strict adherence to technical data packages and quality standards, including SAE AS9100. Delivery is required 450 days after order, with inspection and acceptance occurring at the origin. The shipment is destined for Ramstein Air Base in Germany. The contract mandates strict compliance with several technical and quality requirements, including CMMC Level 2 self-assessment, DLA packaging requirements, and the prohibition of Class I ozone-depleting chemicals and intentionally added mercury. Marking must follow MIL-STD-129, and all requests for waivers or deviations must be approved by the DSC contracting officer. Additionally, the solicitation includes requirements for first article testing and specifies that any costs associated with contract data requirement lists must be factored into the unit price.
Plate Work Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332996
New
DIBBS
TEE, TUBE
Solicitation # SPE7M3-26-T-8805
This contract is a solicitation from the Department of Defense Fluid Handling Division for the procurement of 125 units of TEE, TUBE, identified by NSN 4730-01-341-4902 and part number 16-16-16 070432C. The items must be manufactured in accordance with SAE J514-1 Revision D and are designated as critical application items. The contract specifies a delivery timeframe of 154 days, with a required delivery date of February 22, 2027, and shipping is set as FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, including specific packaging standards such as ASTM D3951 and MIL-STD-129. The contract strictly prohibits the use of Class I ozone-depleting chemicals and requires adherence to configuration change management and covered defense information protocols. All packaging and palletization must follow RP001 requirements, and the contract is subject to full and open competition.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
O-RING
Solicitation # SPE7M4-26-T-380K
This contract is for the procurement of O-rings under solicitation SPE7M4-26-T-380K, identified by NSN 5331011195932. The items are classified as commercial critical application hardware and must be manufactured according to the current revision of the applicable part standards, including MIL-DTL-25988/1B and SAE AMS-R-25988B. The contract specifies a strict zero-defect sampling plan and prohibits the use of asbestos in the items. The procurement is divided into multiple CLINs with varying quantities, including orders for 12, 109, 206, 10, and 50 units, with delivery required within five days after the order. Shipping is FOB Origin to various military locations, including bases in California, Illinois, Oklahoma, and the United Kingdom. Due to the risk of deterioration from ultraviolet rays, the items must be sealed in medium-duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Marking and palletization must comply with MIL-STD-129 and DLA packaging requirements.
Other Fabricated Wire Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE, PREFORMED
Solicitation # SPE7M4-26-T-380F
This contract is for the procurement of one preformed hose, identified by NSN 4720-01-545-7102 and part number NBH7411. The order is issued by the Department of Defense Fluid Handling Division with a required delivery date of March 4, 2026, and a delivery window of 10 days after receipt of order. Shipping is FOB Origin, with inspection and acceptance occurring at the destination in Fort Polk, Louisiana. The supplier must adhere to strict compliance standards, including CMMC Level 2 self-assessment and the prohibition of Class I ozone-depleting chemicals. The item is classified as Type I with a non-extendable shelf life of 120 months, requiring specific markings per MIL-STD-129. Packaging and marking must comply with MIL-STD-130N and DLA packaging requirements, and the shipment must be sent via the fastest traceable means, excluding parcel post.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M4-26-T-379E
Solicitation SPE7M4-26-T-379E is a fixed-price request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 28 non-metallic hose assemblies (NSN 4720016706557). The contract includes a mandatory First Article Test (FAT) requirement, with the FAT unit due within 60 days and the final quantity of 28 units due within 166 days. Delivery is designated as FOB Origin, with both inspection and acceptance occurring at the origin. The items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract imposes stringent technical and security requirements, including the use of a restricted technical data package from Oshkosh Defense, LLC, which requires specific non-disclosure and destruction agreements. Offerors must possess an approved US/Canada Joint Certification Program certification and be authorized by the DLA to access export-controlled data subject to ITAR or EAR regulations. Additionally, the contract requires compliance with CMMC Level 2 certification and prohibits the use of Class I ozone-depleting chemicals. Packaging must adhere to ASTM D3951 and MIL-STD-129, while hazardous materials must be labeled according to the Hazard Communication Standard. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-380A
This contract is for the procurement of eight metal tube assemblies, specifically manufactured from MIL-T-8606 Type 1 Comp 321 steel. The solicitation, issued by the Department of Defense Fluid Handling Division under number SPE7M4-26-T-380A, requires delivery within 172 days after receipt of the order. Each unit package must be clearly marked with the national stock number, contract number, lot number, part number, and both the contractor and manufacturer cage codes. Compliance requirements include CMMC Level 2 certification and adherence to DLA packaging and quality standards. The contract strictly prohibits the use of Class I ozone depleting chemicals and mandates strict export control of technical data under ITAR and EAR regulations. Access to such data is limited to approved contractors with US/Canada Joint Certification Program certification and completed training.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CASTER, SWIVEL
Solicitation # SPE7M4-26-T-380E
This contract is for the procurement of swivel casters under solicitation SPE7M4-26-T-380E, identified by NSN 5340-01-433-0618. The requirement involves multiple line items with various quantities delivered to different military destinations, including locations in the United States and Japan. Delivery is required within five days after receipt of order, with FOB destination terms and inspection and acceptance occurring at the origin. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically regarding packaging, marking, and the removal of government identification from non-accepted supplies. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and items must be manufactured according to the current revision of the applicable part standard. Packaging must comply with MIL-STD-129 and RP001, with specific requirements for hazardous materials under IP025 or commercial packaging under ASTM D3951 for non-hazardous items.
Hardware Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details