This Solicitation opportunity from Department Of Defense was posted on July 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
TUBE, METALLIC
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract pertains to the procurement of metallic tubing specified as Type 1, seamless aluminum alloy, with an outer diameter of 6 inches and a wall thickness of 0.375 inches, each length measuring 16 feet and in H32 temper, manufactured in accordance with the Federal Specification for Tube, Aluminum Alloy, Drawn, Seamless. The item is identified by National Stock Number 4710-00-542-2894 and must be delivered in a quantity of 10 lineal feet (LG), with delivery required 124 days after order at the destination: DLA Distribution, DDSP New Cumberland Facility in New Cumberland, Pennsylvania. The contract is structured as a fixed-price, simplified acquisition under a total small business set-aside, with full and open competition restricted to small business concerns. Compliance with technical standards is governed by SAE AMS-WW-T-700 Revision B dated February 1, 2018, and all items must meet the requirements of the DLA Master List of Technical and Quality Requirements, referenced through RA001. Inspection and acceptance occur at the destination, with sampling required to follow MIL-STD-1916 or ASQ H1331 Table 1, employing zero non-conformances for acceptance unless otherwise specified, and unspecified attributes are classified as major with an AQL of 1.0. Critical, major, and minor attributes are verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Additional testing compliance is mandated per Section 3.2.3 of the applicable federal specification. Packaging must adhere to MIL-STD-2073-1E and ASTM B660, with palletization following DLA Packaging Requirements for Procurement (RP001), and preservation specified as cold/dry storage using unspecified materials. Marking is strictly regulated: every three feet along each tube must be permanently marked with the producer’s name and trademark, specification number, composition and temper, size, contract number, NSN, identification of seamless (S) or welded (W), and heat or lot number, and if the material is cut or resold, the subsequent processor’s identification must also be included. This marking supersedes and supplements standard procurement markings and must comply with MIL-STD-129, including barcoding as required. Ozone-depleting
General Info
Agency
NAICS
Place of Performance
2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
TUBE, METALLIC
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
1 LG = 16 FT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
6IN OD X .375 THK,16 FT LG,TEMPER H32,TYPE 1, IN ACCORDANCE WITH FED
SPEC,TITLED,TUBE,ALUMINUM ALLOY,DRAWN, SEAMLESS. TESTING I/A/W 3.2.3
REQUIRED.
"THIS ITEM HAS BEEN INCLUDED IN THE NAVY'S
INDUSTRIAL MATERIAL IMPROVEMENT PROGRAM.
MARKING IS REQUIRED IN ADDITION TO THAT
CALLED OUT IN THE PROCUREMENT SPECIFICATION.
THE FOLLOWING INFORMATION IS TO BE CONTINUOUSLY
MARKED EVERY THREE FEET ON EACH LENGTH OF
MATERIAL.
1. PRODUCER'S NAME AND TRADEMARK
2. SPECIFICATION
3. COMPOSITION/TEMPER (WHEN APPLICABLE: GRADE,
TYPE, ALLOY, CLASS, TEMPER, ETC.)
4. SIZE (O.D. OR NPS AND WALL THICKNESS OR
SCHEDULE).
5. CONTRACT NUMBER
6. NATIONAL STOCK NUMBER
7. "S" FOR SEAMLESS OR "W" FOR WELDED
8. HEAT NUMBER OR LOT NUMBER
WHEN MARKING IS APPLIED BY A SUPPLIER OR CUT
INTO SHORTER LENGTHS FOR RESALE THE NAME OR
TRADEMARK OF THE SUBSEQUENT PROCESSOR SHALL BE
SPE7M4-26-T-269G
SECTION B
INCLUDED IN THE MARKING."
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
FULL AND OPEN COMPETITION APPLY
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE AMS-WW-T-700/5 REVISION NR B DTD 02/01/2018 PART PIECE NUMBER: TYPE 1
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AMS-WW-T-700 REVISION NR B DTD 02/01/2018 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017528557 0001 LG 10.000
NSN/MATERIAL:4710005422894
DELIVERY (IN DAYS):0124
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:A
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ASTM B660 PACKAGING SHALL BE IAW ASTM-B-660.
PARCEL POST ADDRESS:
SPE7M4-26-T-269G
SECTION B
PR: 7017528557 PRLI: 0001 CONT’D
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:12/02/2026 Original Required Delivery Date:12/02/2026
SPE7M4-26-T-269G NSN/Part Number: 4710-00-542-2894 Quantity: 10 LG Purchase Request: 7017528557QTY: 10 Delivery: 124 days ADO
More opportunities from Department Of Defense → FLUID HANDLING DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS