This Solicitation opportunity from Department Of Defense was posted on May 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
TUBE, SORBENT
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract covers the procurement of sorbent tubes made of Chromosorb 106, featuring a 7 mm outer diameter and 70 mm length divided into two sections, containing 50/100 mg of sorbent material, with glass-sealed ends and glass wool separators. Each tube is protected by an 8 mm OD by 110 mm long protective tube cover. The unit of issue is a package containing 50 tubes. The contract mandates adherence to relevant technical and quality requirements as specified in the Defense Logistics Agency (DLA) master list, with specific packaging and labeling standards to ensure product integrity and compliance. Packaging must protect the contents from damage during shipment and meet medical marking standards for identification and traceability. The item is assigned a National Stock Number (NSN) 6550-01-566-1484 and must conform to a shelf life of 60 months, which is non-extendable, with no more than nine months elapsed between manufacture and government delivery. Shelf life markings must include manufacture date, expiration or retest date, and contract or lot numbers, according to the latest medical marking standards. Delivery is expected within 20 days, with the place of performance at APO, and the procurement is overseen by the Department of Defense’s Medical Supply Chain. The solicitation number is SPE2DS-26-T-104S, with a response deadline in early June 2026, and points of contact are provided for communication.
General Info
Agency
NAICS
Place of Performance
KUNSAN AB BLDG 421, APO, AP, 96264-2022, USSet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
TUBE,SORBENT
FEATURES SORBENT TUBE, CHROMOSORB 106;
7 MM OD X 70 MM LENGTH; 2 SECTION;
50/100 MG SORBENT; GLASS SEALED ENDS;
GLASS WOOL SEPARATORS (WWW); 8 MM OD
X 110 MM LONG PROTECTIVE TUBE COVER.
UNIT OF ISSUE: PG (50 EACH PER PACKAGE)
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
SPE2DS-26-T-104S
SECTION B
..
RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
SHALL HAVE A SHELF LIFE OF 60 MONTHS.
NOT MORE THAN 9 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH
THE LATEST REVISION OF MMS1C.
. ALL LABELS SHALL INCLUDE:
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER.
..
ADEQUATE DATA FOR THE NSN/Part Number: 6550-01-566-1484 Quantity: 1 PG Purchase Request: 7016942365QTY: 1 Delivery: 20 days ADO
