This Solicitation opportunity from Department Of Defense was posted on July 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

TUBING ASSEMBLY, NON

Closed

SPE7M4-26-T-260XFederal

Submission Closed07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 326220

New

DIBBS

Nonmetallic Hose Assembly Fabrication (NSN 4720015891315)This subcontract involves the manufacture and supply of nonmetallic hose assemblies for prime contractors supporting the Department of Defense DLA Weapons Support Maritime Supply Chain. The contractor is responsible for fabricating assemblies according to NSN 4720015891315 specifications, ensuring all products are completed, packaged, and delivered. Performance will take place in Ft Riley. Strict adherence to military standards is required, specifically MIL-STD-129 and MIL-STD-130N for marking, and MIL-STD-1916 and ASQ H1331 for quality assurance. Additionally, the provider must comply with the Buy American Act and guarantee that no Class I ozone-depleting chemicals are used during production. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Nonmetallic Special Shaped Seal SupplierThis subcontract involves the manufacture and supply of specialized nonmetallic seals, specifically identified by NSN 5330016966082, for prime contractors supporting the Department of Defense. The supplier is responsible for providing physical seals formed into special shaped sections that strictly adhere to the DLA Master List of Technical and Quality Requirements. All deliverables must comply with FAR 52.204-24 and DFARS 252.204-7016 regulations. The opportunity is managed by the DLA Weapons Support Land Supplier Operations Vehicle Support agency under NAICS code 326220. The performance location is designated as FPO 96694. Interested parties must submit their responses by the deadline of November 9, 2026, following the posting date of October 27, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Manufacture of Nonmetallic Special Shaped Section SealsThis subcontract involves the manufacture of nonmetallic seals with a special shaped section for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Opns Vehicle Spt projects. The contractor is required to extrude or mold nonmetallic material into continuous 100ft lengths in accordance with NSN 5330-01-248-1401, with a total delivery requirement of 196 rolls. Strict compliance with quality and safety standards is mandatory, including adherence to RA001 quality standards and a guarantee of zero asbestos content per FED-STD-313. The work is categorized under NAICS code 326220 and is designated for performance in Texarkana, Texas.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Nonmetallic Hose (NSN 4720016875600)This subcontract involves the manufacture and supply of nonmetallic hose under NSN 4720016875600 for prime contractors supporting the Department of Defense DLA Weapons Support Maritime Supply Chain. All products must be produced in accordance with the DLA Master List of Technical and Quality Requirements RA001 and must strictly adhere to the Buy American Act and the Berry Amendment. Additionally, the contractor must ensure that all materials are free of Class I ozone-depleting chemicals. The scope of work includes the delivery of completed hoses with packaging and marking performed according to MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N standards. Performance for this contract is centered in Lewis McChord, Washington, under NAICS code 326220. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supplier of Non-Metallic Hose Assemblies (NSN 4720-01-727-780)This subcontract through the Department of Defense ASC Supplier Oper OEM Division requires the provision of three units of non-metallic hose assemblies meeting NSN 4720-01-727-780 specifications. The selected supplier must either manufacture or source these assemblies for prime contractors on DLA supply contracts, ensuring all items are packaged and palletized in strict accordance with MIL-STD-2073-1E and RP001 standards. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 326220. To be eligible for the award, the supplier must maintain an active SAM registration. The response deadline for this requirement is October 30, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Manufacturing of Preformed Packing (NSN 5330010427436)This subcontract involves the manufacture and supply of 22 units of preformed packing components for prime contractors supporting the DLA Weapons Support Strategic Acquisition Program Directorate. The contractor is responsible for fabricating these components to meet the specific dimensions and material properties of NSN 5330010427436 using precision molding or forming equipment. Compliance is mandatory regarding the Buy American Act and the DLA Master List of Technical and Quality Requirements RA001, and the provider must supply a certification of conformance. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 326220, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Manufacturer of Preformed Packing (NSN 5330-01-088-7281)This subcontract involves the manufacture and supply of eight units of preformed packing, identified as NSN 5330-01-088-7281, for prime contractors supporting DLA Weapons Support Land Supplier Opns Vehicle Spt projects. Production must strictly adhere to the DLA Master List of Technical and Quality Requirements RA001. All materials are required to be certified asbestos-free and must maintain full compliance with the Buy American Act and the Berry Amendment. The contractor is required to meet NIST SP 800-171 cybersecurity standards to ensure data protection. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Manufacture and Supply of Nonmetallic Round SealsThis subcontract involves the manufacture and supply of 100 preformed nonmetallic round seals for prime contractors supporting DLA Weapons Support Land projects. The items must be produced according to Basic Drawing 19200 8626228 and Reference Drawing 19200 12579607, utilizing materials that are both asbestos-free and ozone-compliant. Each unit is required to have a shelf life of 153 months and must be accompanied by a Certificate of Conformance. Strict adherence to security and packaging standards is mandatory, including CMMC Level 2 and NIST SP 800-171 compliance. Deliverables must be packed in waterproof bags following MIL-DTL-117 specifications and marked in accordance with MIL-STD-130N. The project is managed under the Department of Defense and is associated with NAICS code 326220, with performance taking place in New Cumberland.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Manufacturer of Plain Seals (NSN 5330-01-687-6056)This subcontract involves the manufacture of 10 finished plain seals for prime contractors supporting DLA Weapons Support Land projects. The fabrication must strictly adhere to NSN 5330-01-687-6056 and the quality requirements specified in the DLA Master List RA001. Environmental restrictions are in place to ensure that no mercury or Class I ozone-depleting chemicals are added during the production process. The project is managed under the Department of Defense and requires strict adherence to ITAR/EAR export control regulations and DFARS 252.204-7012 safeguarding standards. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, regarding this requirement categorized under NAICS code 326220.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supplier of Nonmetallic Medium Pressure Hydraulic HoseThis subcontract involves the supply of rubber-covered, one-wire braid, medium-pressure nonmetallic hydraulic hoses for prime contractors working on Department of Defense Fluid Handling Division projects. The specific requirement is for one Nonmetallic Hydraulic Hose under NSN 4720-01-701-0915, featuring a 2.38 inch inner diameter, a minimum bending radius of 24 inches, and an operating pressure of 350 psi. To ensure quality and safety, the manufacturer must perform burst test certification up to 1400 psi and maintain strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract falls under NAICS code 326220, with the place of performance located at FPO 96678.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Polytetrafluoroethylene (PTFE) High-Temperature Hose Assembly SupplierThis subcontract involves the supply of high-temperature, medium-pressure nonmetallic hose assemblies for prime contractors working with the Department of Defense DLA Weapons Support Fluid Handling Division. The scope of work requires the manufacture of four completed Polytetrafluoroethylene (PTFE) hose assemblies, identified by NSN 4720-01-673-7644, featuring permanently attached flareless-to-flareless fittings. To ensure quality and standardization, the supplier must maintain a QPL/QML listing and adhere strictly to the Detail Specification for PTFE High Temperature Medium Pressure hoses. Additionally, all deliverables must comply with MIL-STD-2073-1E and MIL-STD-129 standards. The opportunity is categorized under NAICS code 326220, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Manufacturer of Plain Seals (NSN 5330-01-708-6467)This subcontract involves the manufacture of 376 plain seals according to NSN 5330-01-708-6467 specifications for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The contractor is required to use 100% asbestos-free materials and must provide five first article samples for government testing prior to the delivery of the full order. Performance will take place at Tinker AFB. To ensure quality and security, the provider must maintain an ISO 9001:2015 inspection system and demonstrate full compliance with DFARS 252.204-7012 and NIST SP 800-171 standards. The final deliverables consist of 376 finished seals and the 5 required samples.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 22 hours ago

DEADLINE

in 12 days

AI Contract Overview

The contract is for a non-tubing assembly with part number 65191-101 and NSN 4720017024227, requiring delivery of 13 units under solicitation SPE7M4-26-T-260X. Delivery is due 78 days from award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance both occur at destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. The item is classified as a critical application with FAA airworthiness approval needed, and supply chain traceability documentation must be retained per DLA Directive Procurement Note C03 from August 2016. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. All packaging and preservation align with DLA’s RP001 and RP003 requirements, including standard preservation methods and container specifications. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is December 1, 2023, with an original delivery target of June 1, 2024. Transportation logistics must adhere to DLAD Procurement Notes C19 and C20, and the unit of issue is each (EA). The contracting office is the Department of Defense’s Fluid Handling Division, with Blake Tushar as the primary point of contact.

General Info

13 units of part 65191-101 due Dec 1, 2023, FOB origin, FAA approval required, zero tolerance, DLA New Cumberland.

Agency

Department Of Defense → FLUID HANDLING DIVISION

NAICS

326220 - Rubber and Plastics Hoses and Belting Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

RFQ SPE7M4-26-T-260X for Fluid Handling Division

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 14

Solicitation

Response DeadlineJul 27

Deadline has passed

Submission Closed

07/27/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Office AddressUSA

Contacts

Blake Tushar

contact@example.gov

+1 (555) 000-0000

Full Description

TUBING ASSEMBLY,NON
TUBING ASSEMBLY,NON
RQ046: FAA Bare Item Marking Requirements RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RP003: PRESERVATION, PACKAGING, PACKING AND MARKING REQUIREMENTS FOR
FEDERAL AVIATION ADMINISTRATION COMMERICAL MATERIAL
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.
RQ019: Federal Aviation Administration (FAA) Airworthiness Approval
CRITICAL APPLICATION ITEM
AIR CRUISERS COMPANY, LLC 70167 P/N 65191-101
SPE7M4-26-T-260X
SECTION B
PR: 7005454915 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7005454915 0001 EA 13.000
NSN/MATERIAL:4720017024227
DELIVERY (IN DAYS):0078
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00
WRAP MAT:FA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:12/01/2023
SPE7M4-26-T-260X
SECTION B
PR: 7005454915 PRLI: 0001 CONT’D
Original Required Delivery Date:06/01/2024
SPE7M4-26-T-260X NSN/Part Number: 4720-01-702-4227 Quantity: 13 EA Purchase Request: 7005454915QTY: 13 Delivery: 78 days ADO