This Solicitation opportunity from Department Of Defense was posted on September 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

TURNBUCKLE BODY

Closed

SPE7M4-26-T-412XFederal

Submission Closed09/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 331110

New

DIBBS

Supply of Certified Hardened Steel/Alloy StockThis subcontract involves the supply of certified raw hardened steel or alloy stock for prime contractors working on projects for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The primary objective is to provide materials that strictly adhere to the hardness requirements specified in Drawing 5210217 Rev B to prevent catastrophic failure. To ensure compliance, the supplier must provide certified mill test reports verifying both the chemical composition and the hardness of the materials before delivery to the manufacturer. The contract falls under NAICS code 331110 and is associated with a place of performance in Tracy, California. Interested parties should note that the response deadline is November 5, 2026. This procurement emphasizes rigorous quality control and certification to meet the high safety and performance standards required for weapons support components.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Check Valves (NSN 4820014091232)This subcontract involves the supply of two specialized check valves, identified by NSN 4820014091232, to support prime contractors on DLA Weapons Support Maritime Supply Chain projects for the USS Dwight D Eisenhower (CVN 69). The contractor is responsible for sourcing valves that strictly adhere to the DLA Master List of Technical and Quality Requirements and ensuring all packaging and marking comply with MIL-STD-2073-1E and MIL-STD-129 standards. Delivery of the units is required on a FOB Origin basis. Managed by the Department of Defense, this opportunity is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 331110. The performance location is listed as FPO 09532. Interested parties must respond by November 9, 2026, following the posting date of October 28, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Carbon Steel Material SupplyThis subcontract involves the sourcing and delivery of specific grade carbon steel to support prime contractors for the DLA Weapons Support Land Supply Chain. The supplier is responsible for providing certified carbon steel stock that adheres to the specifications outlined in Basic Drawing NR 19207 8331537, Revision F, and must include Mill Test Reports to ensure full metallurgical compliance. The contract requires strict adherence to the Buy American Act, ensuring materials originate from domestic or qualifying sources. Performance will take place in New Cumberland, Pennsylvania, with the final delivery of certified materials made directly to the fabricator.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Corrosion Preventive Anodes (NSN 5340-01-665-7473)This subcontract involves the manufacture or sourcing of corrosion preventive anodes, specifically NSN 5340-01-665-7473, for prime contractors supporting the Defense Logistics Agency Weapons Support Land Supply Chain. The selected provider is responsible for delivering one completed anode to the designated DoDAAC at Fort Hood. Strict adherence to marking and labeling standards per MIL-STD-129 and MIL-STD-130N is required, with packaging following ASTM D3951 or IP025 guidelines. Compliance with the Buy American Act and NIST SP 800-171 cybersecurity standards is mandatory for this engagement. The opportunity falls under NAICS code 331110 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Specialized Metal Stock for Manhole AssembliesThis subcontract opportunity is for the supply of specialized raw metal stock, including steel, iron, or alloy materials, specifically required for NSN 4930-01-420-7874 to support prime contractors on DLA Troop Support projects. The selected provider must deliver certified raw materials directly to the manufacturer and provide Material Test Reports to ensure full compliance with the Buy American Act and the Berry Amendment. Managed by the Department of Defense under NAICS code 331110, this contract is designated as a Service-Disabled Veteran-Owned Small Business set-aside. Performance will take place in Texarkana, Texas, with a response deadline set for November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Certified Material Supply for D.E.R.M.This subcontract, titled Certified Material Supply for D.E.R.M., is issued by the Department of the Navy through the DLA Mechanicsburg agency. The contractor is responsible for supplying raw metals, polymers, or composites to prime contractors on DLA supply contracts, ensuring all materials adhere to the specific grades and standards outlined in TDP Version 001. Performance will take place in Mechanicsburg, Pennsylvania, under NAICS code 331110. Critical requirements for this contract include the provision of full supply chain traceability, supported by mill test reports and certificates of conformance. Additionally, the supplier must strictly comply with the Counterfeit Detection and Avoidance Program guidelines to ensure the integrity of all certified raw materials delivered. The response deadline for this opportunity is November 12, 2026.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Supplier of 115RE and 136RE Continuous Welded RailsThis subcontract involves the supply and delivery of specialized Continuous Welded Rails for prime contractors working on MTA Long Island Rail Road procurement projects. The scope of work requires the provision of 115RE standard and 136RE heavy-duty rail profiles in long lengths to minimize joints, with all materials manufactured in strict accordance with LIRR Specifications. The selected supplier is responsible for delivering the physical rail steel to the Fresh Pond Rail Yard located in Masbeth, New York. This opportunity falls under NAICS code 331110 and has a response deadline of November 19, 2026.

MTA - Long Island Rail Road

POSTED

DEADLINE

Supply of Fastener-Grade Steel/AlloyThis HUBZone set-aside subcontract involves the supply of fastener-grade steel or alloy raw metal stock, provided as wire or bar, for prime contractors working on DLA Weapons Support ASC projects. The materials must strictly adhere to the metallurgical specifications of NSN 5310-01-137-6955 and be sourced domestically in compliance with the Buy American Act. The selected provider is responsible for delivering the raw metal stock directly to the manufacturer and providing Material Test Reports to verify that all technical standards have been met. This opportunity falls under NAICS code 331110 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Ballistic-Grade Material SupplyThis subcontract involves the supply of certified ballistic-grade metals to prime contractors supporting DLA Weapons Support Land projects. The scope of work requires the provision of raw materials that strictly adhere to MIL-A-12560J and MIL-A-11356 standards. To ensure compliance and quality, the supplier must deliver certified raw metal stock accompanied by a comprehensive Contractor Quality Control material certification package, which includes chemical composition reports, mechanical properties test results, and ballistic testing data. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Operations Vehicle Support agency, with performance taking place in New Cumberland. Interested parties should note the response deadline of November 9, 2026. The contract is categorized under NAICS code 331110, focusing on the specialized procurement of high-grade materials essential for defense weaponry applications.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Hot Rolled Steel Sheet SupplierThis subcontract involves the supply of 57 hot rolled steel sheets to prime contractors supporting DLA Troop Support Construction and Equipment Metals contracts. The required materials must be commercial quality, as fabricated with a milled edge, and strictly adhere to the dimensions of 0.1196 inches in thickness, 48 inches in width, and 144 inches in length as specified by NSN 9515009595243. Managed by the Department of Defense through DLA Dist San Joaquin, the contract falls under NAICS code 331110. The place of performance is located in Tracy, California. Interested parties should note the response deadline of November 9, 2026, following the posting date of October 27, 2026.

POSTED

DEADLINE

Supply of Berry Amendment Compliant Forging MaterialThis subcontract involves the supply of raw metal stock for prime contractors supporting the DLA Weapons Support Land Supply Chain. The provider is responsible for delivering alloy and metal stock that strictly adheres to the specifications outlined in drawing NR 76301 74A695309 Revision E. To ensure full regulatory compliance, the supplier must provide certification of origin in accordance with the Berry Amendment and the Buy American Act. The contract is managed under NAICS code 331110 for the Department of Defense. The selected provider will be tasked with delivering the certified raw material stock directly to the manufacturer, with the place of performance located at FPO 96310-7161. Responses for this requirement are due by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Steel Casting/Forging for Gear Cluster BlanksThis subcontract involves the production and delivery of raw steel forged or cast blanks for gear clusters to support prime contractors under DLA Weapons Support contracts. The scope of work requires the casting or forging of high-grade alloy steel to near-net shape, including the application of specific heat treatments to ensure all metallurgical specifications are met. To ensure material certification, the provider must supply comprehensive mill test reports with the delivered blanks. The project is managed under the Department of Defense through the DLA Weapons Support Land Supplier Opns Engines agency, falling under NAICS code 331110. Performance of the contract is centered in New Cumberland, Pennsylvania. Interested parties must adhere to the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

2 days ago

DEADLINE

in 11 days

AI Contract Overview

This solicitation, issued by the DLA Land and Maritime Fluid Handling Division under number SPE7M4-26-T-412X, seeks quotes for the procurement of turnbuckle bodies identified by NSN 5340-00-067-9880. The requirement is divided into five CLINs with a total quantity of 1,056 units to be delivered to various DLA distribution centers, including locations in North Carolina, Texas, California, Georgia, and Pennsylvania. The original required delivery date for these items is March 26, 2027, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The items are classified as critical application commercial items and must adhere to technical specifications MIL-DTL-8878M and QPL-8878-13. Offerors must be QPL approved at the time of award and provide components only from qualified sources. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331. Packaging must comply with MIL-STD-129 for marking and RP001 for palletization, with specific requirements based on whether the material is hazardous per FED-STD-313. All quotes must be submitted via the DIBBS system by September 28, 2026, and must comply with the Buy American Act and Berry Amendment restrictions.

General Info

DLA seeks quotes for 1,056 turnbuckle bodies due March 26, 2027.

Agency

Department Of Defense → FLUID HANDLING DIVISION

NAICS

331110 - Iron and Steel Mills and Ferroalloy Manufacturing

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, USA

Set-Aside

NONE

Documents

SPE7M4-26-T-412X - Request for Quotations

25 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedSep 15

Solicitation

Response DeadlineSep 28

Deadline has passed

Submission Closed

09/28/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Office AddressUSA

Contacts

Blake Tushar

contact@example.gov

+1 (555) 000-0000

Full Description

TURNBUCKLE BODY
TURNBUCKLE BODY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
BRASS
"BARRELS MUST BE DATE STAMPED WITH YEAR OF MFG
IF BRASS BARRELS ARE IMPRESSION STAMPED, IT MUST
BE DONE BEFORE STRESS RELIEVING.
QPL-8878-12 DATED 25 JULY 2005
TECH DATA AVAILABILITY
THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML
REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE
QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE
QPL(S)/QML(S).
THIS NSN HAS QUALIFIED PRODUCTS LIST (QPL)
REQUIREMENTS.
.
THE MANUFACTURER FOR THE QPL ITEM MUST BE QPL
APPROVED AT THE TIME OF THE CONTRACT AWARD.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MS21251M(2) NOT 2 REVISION NR M DTD 03/15/2021
SPE7M4-26-T-412X
SECTION B
PART PIECE NUMBER: MS21251-B5L
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-DTL-8878M REVISION NR M DTD 03/22/2021 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK QPL-8878-13 NOT 1 REVISION NR 13 DTD 10/29/2009 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018272827 0001 EA 5.000
NSN/MATERIAL:5340000679880
DELIVERY (IN DAYS):0099
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
SPE7M4-26-T-412X
SECTION B
PR: 7018272827 PRLI: 0001 CONT’D
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
Need Ship Date:09/10/2026 Original Required Delivery Date:03/26/2027
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7018272827 0002 EA 33.000
NSN/MATERIAL:5340000679880
DELIVERY (IN DAYS):0099
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
SPE7M4-26-T-412X
SECTION B
PR: 7018272827 PRLI: 0002 CONT’D
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3222
DLA DISTRIBUTION CORPUS CHRISTI TX
DDCT-S 540 FIRST STREET SE
CORPUS CHRISTI TX 78419-5255
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3222
DLA DISTRIBUTION CORPUS CHRISTI TX
GPS USE 100 NAS DR PH +1 (555) 000-0000
540 FIRST STREET SE BLDG 1846
CORPUS CHRISTI TX 78419-5255
US
Need Ship Date:04/11/2027 Original Required Delivery Date:03/26/2027
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 7018272827 0003 EA 189.000
NSN/MATERIAL:5340000679880
DELIVERY (IN DAYS):0099
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE7M4-26-T-412X
SECTION B
PR: 7018272827 PRLI: 0003 CONT’D
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
SPE7M4-26-T-412X
SECTION B
PR: 7018272827 PRLI: 0003 CONT’D
TRACY CA 95304-5000
US
Need Ship Date:05/20/2026 Original Required Delivery Date:03/26/2027
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0004 7018272827 0004 EA 226.000
NSN/MATERIAL:5340000679880
DELIVERY (IN DAYS):0099
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE7M4-26-T-412X
SECTION B
PR: 7018272827 PRLI: 0004 CONT’D
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:09/10/2026 Original Required Delivery Date:03/26/2027
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%
SPE7M4-26-T-412X
SECTION B
PR: 7018272827 PRLI: 0005 CONT’D
2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0005 7018272827 0005 EA 603.000
NSN/MATERIAL:5340000679880
DELIVERY (IN DAYS):0099
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
SPE7M4-26-T-412X
SECTION B
PR: 7018272827 PRLI: 0005 CONT’D
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:08/03/2026 Original Required Delivery Date:03/26/2027
SPE7M4-26-T-412X NSN/Part Number: 5340-00-067-9880 Quantity: 5 EA Purchase Request: 7018272827QTY: 1056 Delivery: 99 days ADO