This Solicitation opportunity from Department Of Defense was posted on October 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

TURNBUCKLE BODY

Closed

SPE7M4-27-T-0034Federal

Submission Closed10/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 331110

New

DIBBS

Hot Rolled Metal Plate Fabrication (NSN 9515002044574)This subcontract, issued by the Department of Defense for the DLA Weapons Support Nuclear Reactor Program, involves the fabrication and supply of twelve hot rolled metal plates. The plates must be manufactured to specific dimensions of 0.3125 inches by 50 inches by 144 inches and feature either a pickled or sand blasted finish. All materials must strictly comply with ASTM A240/A240M-26 and ASTM A480/A480M-20A standards, with permanent marking required according to ASTM A480/A480M Paragraph 25. The project is designated as a Total Small Business Set-Aside under NAICS code 331110, with performance taking place in New Cumberland. Final deliverables must be finished, marked, and certified, accompanied by DD Form 1423. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Casting Material SupplyThis subcontract, titled Casting Material Supply, involves the provision of raw metal ingots or alloys to prime contractors supporting DLA Weapons Support supply contracts. The supplier is responsible for delivering raw materials that adhere to specific metallurgical specifications for NSN 2530-01-148-7074, including the submission of necessary Mill Test Reports for material certification. All materials are to be delivered directly to the designated casting facility. Managed by the Department of Defense under the DLA Weapons Support Land Supplier Opns Vehicle Spt agency, the contract falls under NAICS code 331110. The place of performance is located in Texarkana, Texas. The solicitation was posted on October 29, 2026, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0109

Solicitation SPE8E4-27-T-0109 is a request for quotation issued by the Defense Logistics Agency for the procurement of 54 feet of round metal bar. The material must be Copper Alloy 715, hot or cold worked with a soft temper, measuring 2.000 inches in diameter and supplied in whole foot lengths between 8 and 12 feet. The procurement is governed by NAICS code 331110 and requires strict adherence to technical standards including MIL-C-15726F(1), MIL-C-3993C, MIL-STD-129R(3), and SAE AMS-STD-185A. Delivery is specified as FOB Origin with a need ship date of June 18, 2026, and a final required delivery date of January 13, 2027, to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. A critical requirement for this award is that only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible. The contractor must provide a Certificate of Quality Compliance with every shipment and follow rigorous marking and labeling protocols, including waterproof stenciling of the contract number, NSN, and material specifications; failure to comply with these marking requirements may result in product rejection. Additionally, the contract incorporates various DFARS and FAR clauses regarding the safeguarding of covered defense information, cybersecurity reporting, and domestic sourcing restrictions under the Buy American Act and Berry Amendment. Invoicing and payment are to be processed electronically via the Wide Area WorkFlow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E9-27-T-0244

Solicitation SPE8E9-27-T-0244 is a total small business set-aside for the procurement of two units of aluminum alloy metal plate (NSN 9535-01-379-9673). The required material must be Alloy 7075, Temper T7351, with dimensions of 48 inches in width, 12 feet in length, and a cross-sectional thickness of 3 inches. All material must be supplied in whole feet lengths. The procurement is governed by several technical standards, including SAE AMS4078 Revision L, ASTM B660, and ASTM B666, and requires a Certificate of Quality Compliance (Mill-Material Certification) to be provided with every shipment. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contract specifies destination inspection and acceptance at the DLA Distribution Depot Oklahoma at Tinker AFB. Packaging and marking must adhere to MIL-STD-129, MIL-STD-2073-1E, and RP001, with specific requirements for continuous identification markings including the contract delivery order number, NSN, and manufacturer details. The required delivery date is April 18, 2027, with a need ship date of March 28, 2027. All quotes must be submitted via the DIBBS portal by October 29, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0183

Solicitation SPE8E4-27-T-0183 is a request for quotations for one sheet of aluminum alloy Alclad 7475 temper T761, featuring a 0.002 inch cladding thickness on both sides and dimensions of 0.100 inches thick, 48.00 inches wide, and 168.00 inches long. The material must be supplied in whole feet lengths and comply with SAE AMS4100G Revision G and reference drawing 14153 01735. This is a critical application item requiring a Certificate of Quality Compliance and adherence to the Qualified Suppliers List for Manufacturers or Distributors (QSLM/QSLD). Only approved QSL distributors are eligible for award unless a deviation is explicitly indicated. The contract specifies delivery within 167 days after the award, with a need ship date of April 26, 2027, and a required delivery date of February 2, 2028. Shipping is FOB Origin to DLA Distribution Warner Robins, Georgia. Packaging and preservation must adhere to ASTM B660 and MIL-STD-2073-1E, with palletization following RP001. Strict marking requirements are mandated per MIL-STD-129, including the DLA contract number, NSN, and detailed material specifications. Inspection and acceptance will occur at the destination. The procurement is a HUBZone set-aside and requires the use of the Wide Area WorkFlow system for invoicing and payment.

POSTED

DEADLINE

Inconel Powder SupplyThis subcontract agreement with Texas A&M University involves the supply of high-grade Inconel metal powder to support additive manufacturing projects managed by the Texas A&M Engineering Experiment Station. The scope of work requires the delivery of 10 kg of powder that adheres to strict grade, purity, and particle size specifications to ensure compatibility with the ACONITYMIDI system. The procurement is categorized under NAICS code 331110 and was posted on October 29, 2026, with a response deadline of November 9, 2026. The primary objective of the contract is to provide prime contractors with the necessary materials to execute specialized manufacturing tasks within the university's technical framework.

POSTED

DEADLINE

Supply of Raw Materials for Rotary Forge Hammers

POSTED

DEADLINE

Raw Material Supply (Specialty Steels/Alloys)This subcontract under DLA Aviation involves the sourcing, certification, and delivery of specialty raw materials for prime contractors working on Defense Logistics Agency bearing manufacture projects. The scope of work focuses on providing high-carbon chrome steel, stainless steel, and bearing-grade alloys, with a strict requirement for Mill Test Reports to ensure all materials comply with government standards. Operating under NAICS code 331110, the contract ensures the delivery of certified raw material stock to support Department of Defense initiatives. The opportunity was posted on October 29, 2026, with a response deadline of November 4, 2026.

POSTED

DEADLINE

ERCuNiAl TIG Welding Wire SupplierThis small business set-aside subcontract through the Department of Defense and the NSWC Philadelphia Division involves the supply of ERCuNiAl TIG welding wires for prime contractors working on NAVSEA Naval Foundry and Propeller Center projects. The supplier is responsible for manufacturing and sourcing copper-nickel-aluminum alloy wire in 3/32 inch by 36 inch and 1/8 inch by 36 inch sizes, ensuring strict adherence to MIL-E-23765/3A specifications. The scope of work requires the delivery of 80 containers of MIL-SPEC welding wire along with comprehensive technical compliance documentation. Deliverables include Level C packaging and a full Certification Package as mandated by CDRL/DD Form 1423. The contract falls under NAICS code 331110 and is to be performed in the 19112 zip code area.

Nswc Philadelphia Division

POSTED

DEADLINE

Supply of Certified Hardened Steel/Alloy StockThis subcontract involves the supply of certified raw hardened steel or alloy stock for prime contractors working on projects for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The primary objective is to provide materials that strictly adhere to the hardness requirements specified in Drawing 5210217 Rev B to prevent catastrophic failure. To ensure compliance, the supplier must provide certified mill test reports verifying both the chemical composition and the hardness of the materials before delivery to the manufacturer. The contract falls under NAICS code 331110 and is associated with a place of performance in Tracy, California. Interested parties should note that the response deadline is November 5, 2026. This procurement emphasizes rigorous quality control and certification to meet the high safety and performance standards required for weapons support components.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Check Valves (NSN 4820014091232)This subcontract involves the supply of two specialized check valves, identified by NSN 4820014091232, to support prime contractors on DLA Weapons Support Maritime Supply Chain projects for the USS Dwight D Eisenhower (CVN 69). The contractor is responsible for sourcing valves that strictly adhere to the DLA Master List of Technical and Quality Requirements and ensuring all packaging and marking comply with MIL-STD-2073-1E and MIL-STD-129 standards. Delivery of the units is required on a FOB Origin basis. Managed by the Department of Defense, this opportunity is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 331110. The performance location is listed as FPO 09532. Interested parties must respond by November 9, 2026, following the posting date of October 28, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Carbon Steel Material SupplyThis subcontract involves the sourcing and delivery of specific grade carbon steel to support prime contractors for the DLA Weapons Support Land Supply Chain. The supplier is responsible for providing certified carbon steel stock that adheres to the specifications outlined in Basic Drawing NR 19207 8331537, Revision F, and must include Mill Test Reports to ensure full metallurgical compliance. The contract requires strict adherence to the Buy American Act, ensuring materials originate from domestic or qualifying sources. Performance will take place in New Cumberland, Pennsylvania, with the final delivery of certified materials made directly to the fabricator.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 11 days

AI Contract Overview

Solicitation SPE7M4-27-T-0034, issued by the DLA Land and Maritime Fluid Handling Division, is a fixed-price procurement for 1,229 Turnbuckle Body components under NSN 5340-00-0679880. The requirement is divided into five CLINs with quantities ranging from 35 to 625 units, destined for various DLA Distribution centers including Cherry Point, Corpus Christi, San Joaquin, Warner Robins, and New Cumberland. Delivery is required within 99 days after receipt of order, with an original required delivery date of March 26, 2027, and FOB Origin terms. The components are identified as critical application commercial items that must meet QPL/QML requirements, specifically referencing MIL-DTL-8878M and MS21251M. Technical specifications require brass barrels to be date stamped with the year of manufacture, and any impression stamping must occur before stress relieving. Quality assurance involves destination inspection and acceptance using sampling methods such as MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Packaging must adhere to RP001 and MIL-STD-129, with non-hazardous materials following ASTM D3951 and hazardous materials following TQ Requirement IP025. The contract incorporates several critical FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. All quotes must be submitted via the DIBBS system, and payment processing is managed through the Wide Area WorkFlow system.

General Info

DLA fixed-price contract for 1,229 Turnbuckle Body components delivered by March 26, 2027.

Agency

Department Of Defense → FLUID HANDLING DIVISION

NAICS

331110 - Iron and Steel Mills and Ferroalloy Manufacturing

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, USA

Set-Aside

NONE

Documents

RFQ SPE7M4-27-T-0034

25 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedOct 1

Solicitation

Response DeadlineOct 13

Deadline has passed

Submission Closed

10/13/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Office AddressUSA

Contacts

Blake Tushar

contact@example.gov

+1 (555) 000-0000

Full Description

TURNBUCKLE BODY
TURNBUCKLE BODY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
BRASS
"BARRELS MUST BE DATE STAMPED WITH YEAR OF MFG
IF BRASS BARRELS ARE IMPRESSION STAMPED, IT MUST
BE DONE BEFORE STRESS RELIEVING.
QPL-8878-12 DATED 25 JULY 2005
TECH DATA AVAILABILITY
THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML
REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE
QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE
QPL(S)/QML(S).
THIS NSN HAS QUALIFIED PRODUCTS LIST (QPL)
REQUIREMENTS.
.
THE MANUFACTURER FOR THE QPL ITEM MUST BE QPL
APPROVED AT THE TIME OF THE CONTRACT AWARD.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MS21251M(2) NOT 2 REVISION NR M DTD 03/15/2021
SPE7M4-27-T-0034
SECTION B
PART PIECE NUMBER: MS21251-B5L
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-DTL-8878M REVISION NR M DTD 03/22/2021 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK QPL-8878-13 NOT 1 REVISION NR 13 DTD 10/29/2009 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018272827 0001 EA 145.000
NSN/MATERIAL:5340000679880
DELIVERY (IN DAYS):0099
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
SPE7M4-27-T-0034
SECTION B
PR: 7018272827 PRLI: 0001 CONT’D
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
Need Ship Date:09/10/2026 Original Required Delivery Date:03/26/2027
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7018272827 0002 EA 35.000
NSN/MATERIAL:5340000679880
DELIVERY (IN DAYS):0099
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
SPE7M4-27-T-0034
SECTION B
PR: 7018272827 PRLI: 0002 CONT’D
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3222
DLA DISTRIBUTION CORPUS CHRISTI TX
DDCT-S 540 FIRST STREET SE
CORPUS CHRISTI TX 78419-5255
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3222
DLA DISTRIBUTION CORPUS CHRISTI TX
GPS USE 100 NAS DR PH +1 (555) 000-0000
540 FIRST STREET SE BLDG 1846
CORPUS CHRISTI TX 78419-5255
US
Need Ship Date:04/11/2027 Original Required Delivery Date:03/26/2027
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 7018272827 0003 EA 189.000
NSN/MATERIAL:5340000679880
DELIVERY (IN DAYS):0099
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE7M4-27-T-0034
SECTION B
PR: 7018272827 PRLI: 0003 CONT’D
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
SPE7M4-27-T-0034
SECTION B
PR: 7018272827 PRLI: 0003 CONT’D
TRACY CA 95304-5000
US
Need Ship Date:05/20/2026 Original Required Delivery Date:03/26/2027
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0004 7018272827 0004 EA 235.000
NSN/MATERIAL:5340000679880
DELIVERY (IN DAYS):0099
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE7M4-27-T-0034
SECTION B
PR: 7018272827 PRLI: 0004 CONT’D
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:09/10/2026 Original Required Delivery Date:03/26/2027
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%
SPE7M4-27-T-0034
SECTION B
PR: 7018272827 PRLI: 0005 CONT’D
2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0005 7018272827 0005 EA 625.000
NSN/MATERIAL:5340000679880
DELIVERY (IN DAYS):0099
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
SPE7M4-27-T-0034
SECTION B
PR: 7018272827 PRLI: 0005 CONT’D
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:08/03/2026 Original Required Delivery Date:03/26/2027
SPE7M4-27-T-0034 NSN/Part Number: 5340-00-067-9880 Quantity: 145 EA Purchase Request: 7018272827QTY: 1229 Delivery: 99 days ADO