Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Iowa was posted on June 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

UAV System Integration and Supply

Closed
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334511
New
Federal
Request for Information (RFI) – Modular Tactical Signals Intelligence (SIGINT) EW System
Solicitation # FA8629-27-R-5005
The United States Air Force Life Cycle Management Center, specifically the Special Warfare Program Office, is conducting market research through a Sources Sought Synopsis and Request for Information under solicitation FA8629-27-R-5005. The government is seeking to identify capable sources for a body-worn, modular tactical Signals Intelligence and Electronic Warfare system characterized by low size, weight, and power. The system must support full spectrum signals prosecution in adverse environments, including the ability to detect, identify, and direction-find threat signals while stationary or on the move. Key technical requirements include interoperability with Android S20TE and S23TE devices, connectivity via mesh networks, and electronic warfare attack capabilities with tunable output power. Objective goals include Mil-STD-810G compliance, operation between -30C and +55C, and support for advanced jamming techniques such as predictive and reactive hop-set jamming. This RFI is for informational purposes only and does not constitute a formal solicitation or a commitment to procure items. Interested respondents must submit a maximum 15-page response by 12:00 PM Eastern time on November 18, 2026. Submissions must include company identification, socioeconomic status, technical capabilities, and a rough order of magnitude cost estimate. The government also requires information regarding the ability to deliver two units within six months of an order and confirmation of compliance with the Buy American Act or Berry Amendment. Additionally, respondents must address compliance with FAR 52.219-14 regarding limitations on subcontracting and FAR 52.219-33 regarding the Non-Manufacturer Rule if the requirement is set aside for small businesses.
FA8629 Aflcmc Wisk Sof/pr

POSTED

about 2 hours ago

DEADLINE

in 21 days
NAICS: 334511
New
Federal
ROTOR TORPEDO
Solicitation # N0010426QNF10
Solicitation N0010426QNF10, issued by the Department of the Navy's NAVSUP Weapon Systems Support Mech, is a total small business set-aside request for quotations for the manufacture of Rotor Torpedoes (NSN 1355-01-561-1348). The scope includes the production of hardware according to Technical Data Package version 009 and specific quality requirements. The government has included an option to increase the order quantity by up to 100 percent. Delivery is required within 405 days on a FOB Destination basis. Award will be granted to the responsible offeror providing the lowest priced technically acceptable offer, with evaluations incorporating the Supplier Performance Risk System to assess item, price, and supplier risk. The contract mandates strict adherence to several military standards, including MIL-STD-129 for marking, MIL-STD-973 for configuration management, and MIL-STD-2073-1 for preservation and packaging. A critical requirement is that all materials must be mercury-free to prevent corrosion and toxicity on submarines and surface ships. Quality systems must comply with ISO 9001, and each unit must be serialized through the Commander Naval Undersea Warfare Center. Administrative requirements include the use of Wide Area Workflow for invoicing and payment, and compliance with DFARS cybersecurity and Buy American regulations.
Navsup Weapon Systems Support Mech

POSTED

about 2 hours ago

DEADLINE

in about 1 month
NAICS: 334511
New
Federal
COMPUTER,FUEL MANAG
Solicitation # N0038327QAA08
Solicitation NO0383-27-Q-AA08, issued by NAVSUP Weapon Systems Support Philadelphia, is a small business set-aside for the teardown, evaluation, repair, overhaul, and modification of Fuel Management Computers (NSN 6610-01-523-8319, P/N 512010-03-01). The primary objective is to return these units to a Ready for Issue (RFI) condition. A critical technical requirement includes the mandatory replacement of all seven transorbs on the internal Fuel Interface Card (PN512023-04-01) as part of standard repair procedures. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, as the government will not provide manufacturing aids. Specific prohibitions include the use of MIL-W-81381 wire, which must be replaced by SAE-AS22759 series wire. The contract mandates strict adherence to quality and technical standards, including ISO 9001/SAE AS9100 for quality management and ANSI/NCSL Z540.3 or ISO-10012-1 for calibration. Performance is subject to government inspection and acceptance at the origin, with a required delivery timeframe of 90 days FOB Destination. The award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Additional administrative requirements include the use of the Wide Area Workflow (WAWF) system for invoicing and compliance with MIL-STD-2073-1 for packaging and MIL-STD-129 for marking.
Navsup Weapon Systems Support

POSTED

about 2 hours ago

DEADLINE

in 22 days
NAICS: 334511
New
International
Binocular Night Vision Device
Solicitation # 202603695
The Royal Canadian Mounted Police is establishing a National Individual Standing Offer for the supply and delivery of Binocular Night Vision Goggle systems and adjustable iris units to enhance member safety. The requirement includes Generation 2+ and Generation 3 White Phosphorous goggles, as well as adjustable iris units, with initial quantities of 25, 75, and 200 units respectively. The standing offer is valid for two years from the date of issuance, with the possibility of two additional one-year extensions. All goods must be delivered Duty Paid to the RCMP National Warehouse in Ottawa, Ontario, within 60 calendar days of receiving a call-up. Selection is based on the lowest compliant bid following a three-phase evaluation process involving visual, operational, and measurement assessments of samples. Technical requirements include compliance with MIL-STD-810H for drop tests, IEC 60825-1 for laser safety, and specific marking requirements such as permanently affixed metal nameplates with laser-engraved serial numbers and ITAR designations. The contract mandates the use of reusable, returnable, or recyclable packaging in accordance with the Policy on Green Procurement. Suppliers must also provide certifications regarding the absence of forced labour, independent offer determination to prevent collusion, and adherence to the procurement Code of Conduct.
Royal Canadian Mounted Police

POSTED

about 9 hours ago

DEADLINE

in 19 days

AI Contract Overview

Show more

The contract seeks the supply and integration of a complete unmanned aerial vehicle system with multi-payload capability, enabling operation beyond visual line of sight and featuring precise RTK GPS integration for enhanced navigation accuracy. The system must fully comply with Department of Defense security standards to ensure data integrity, secure communications, and protection against unauthorized access or cyber threats. Integration efforts must accommodate seamless interoperability with existing military and tactical infrastructure, with emphasis on reliability, field durability, and mission adaptability under variable environmental conditions. The subcontract is issued by the state of Iowa under NAICS code 334511, targeting advanced aviation and unmanned systems manufacturers or integrators with proven experience in defense-grade UAV solutions. Responses are due by July 6, 2026, and the opportunity is accessible through the designated online portal. There is no set-aside designation specified, meaning all eligible entities may respond, and performance is expected to align with Iowa’s operational requirements, although a specific place of performance has not been outlined. The focus is on delivering a robust, secure, and scalable UAV solution ready for immediate deployment in real-world scenarios.

General Info

Supply and integrate secure, beyond-visual-line-of-sight UAV system with RTK GPS for DoD compliance and military interoperability.

Documents

This scope was carved out of 582-RFB-2852-2026.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

UAV/Drone

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyIowa
ContactsNo contacts available
OfficeN/A
Organization / AgencyIowa
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply and integration of a complete UAV system with multi-payload capability, BVLOS operation, RTK GPS integration, and compliance with DOD security requirements.

More opportunities from Iowa

Same awarding agency

New
SLED
Rest Area Tiffin East Bound Façade Renovations
Solicitation # 645-DOTRFB-3161-2027
The Iowa Department of Transportation is soliciting bids for the facade renovations of the I-80 East Bound Rest Area near Tiffin, Iowa. The project involves the removal and replacement of the existing surface tile and stucco insulation system with a rain screen fiber cement siding system, as well as the application of cementitious stucco or parging over existing concrete masonry on specific walls. Because the facility will remain occupied during construction, the contractor must manage activities to minimize disruption to the public and DOT staff. All work must adhere to the provided project manual and plans and will be performed under the direct supervision of the Iowa DOT, including periodic site inspections and a requirement for 24-hour advance notice prior to installation. The contract will be awarded by item to the responsible bidder whose submission is most advantageous based on cost, proposed staffing, adherence to the time schedule, and a review of past work performance and capacity. Bids must be submitted via the IMPACS Business Opportunities site by November 17, 2026. The estimated start date is March 2027, depending on weather conditions, with a target completion date of June 30, 2026. Payment terms are set at Net 60, and the bidding process is governed by Iowa Administrative Code 761-20. Davis-Bacon wages do not apply to this project.

POSTED

about 20 hours ago

DEADLINE

in 20 days
View Details
New
SLED
Iowa DOT Repair Shop Annex Overhead Door Tracks
Solicitation # 645-DOTRFQ-3173-2027
Solicitation 645-DOTRFQ-3173-2027 is a request for quotes from the Iowa Department of Transportation for the removal and replacement of overhead door tracks at the Repair Shop Annex. The scope of work includes replacing standard overhead door tracks on doors RA-1, 2, 3, 4, and 7 with galvanized pitch of roof tracks that match the roof angle, replacing torsion springs, and the removal and re-installation of trolley operators. All work must adhere to the approved design and be performed under the direct supervision of the Iowa DOT, with the contractor providing at least 24 hours notice prior to installation for required inspections. Electrical conflicts will be managed by DOT electricians, and deliveries are specified as F.O.B Destination. The contract will be awarded to the responsible bidder whose submission is most advantageous, evaluating cost alongside mandatory requirements, proposed staffing, the ability to meet the time schedule, and past work performance and capacity. Bidders must certify acceptance of ten specific solicitation items and comply with Iowa Administrative Code 761-20. Payment terms are set at net 60 days after delivery of the new door track. This is a tax-exempt procurement, and Davis-Bacon wages do not apply. Responses are due by November 10, 2026, at 1:00 PM CST, with the primary point of contact being Kyle Williams.

POSTED

about 20 hours ago

DEADLINE

in 13 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS