Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

UII/UID and Data Matrix Marking Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the application of permanent, MIL-STD-130-compliant Unique Item Identification markings using Data Matrix ECC200 symbology on six individual units. The work encompasses full lifecycle compliance, including verification of marking accuracy and durability testing to ensure the markings withstand environmental and operational stresses as mandated by military standards. This effort is critical for tracking and inventory management within the Department of Defense supply chain, ensuring each item is uniquely identifiable and traceable through its service life. The task is structured as a subcontract under NAICS code 323111, which pertains to printing and related support activities, and is administered by the Defense Logistics Agency at Mechanicsburg. While no solicitation number is provided, the contract was posted on May 8, 2026, with performance location and point of contact information not specified. Compliance with MIL-STD-130 is non-negotiable, and all markings must meet exacting standards for scannability, permanence, and data integrity to satisfy federal accountability requirements.

General Info

Apply and verify MIL-STD-130 compliant Data Matrix UII markings on six units for DoD tracking.

Agency

Department Of Defense → SPRMM1 DLA MechanicsburgView Agency

NAICS

323111 - Commercial Printing (except Screen and Books)View NAICS

Place of Performance

PA, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRMM1-26-P-KB39.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

49 - TOOL,CVT DITMCO

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedMay 8

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → SPRMM1 DLA Mechanicsburg

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Apply permanent, MIL-STD-130-compliant Unique Item Identification (UII) markings using Data Matrix (ECC200) on 6 units, including verification and durability testing.

Similar Contracts

Same NAICS industry code

Solicitation # SPE8E6-26-T-4407

Solicitation SPE8E6-26-T-4407 is a fixed-price request for quotations issued by DLA Troop Support for the procurement of four decals, identified by NSN 7690-01-262-9486 and Boeing part number BACM9L10AVM. This is a Foreign Military Sales requirement for Greece, with delivery required within five days after receipt of order. The items are designated as Type I (Code M) with a non-extendable shelf life of 24 months. Inspection and acceptance will occur at the point of origin, and the final delivery destination is Mechanicsburg, Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including required shelf-life labels. Palletization must comply with RP001, and the use of plastics for wrapping or cushioning should be avoided where possible. Technical and quality requirements are governed by the DLA Master List, including provisions for the removal of government identification from non-accepted supplies and the safeguarding of covered defense information. All quotes must be submitted via the DIBBS portal, and the government will not evaluate offers utilizing additive manufacturing unless specifically authorized.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

2027 Recycling Calendars Printing & Mailing

Solicitation # 12492

The City of Greensboro is soliciting bids under event 12492 for the printing and mailing of approximately 80,000 to 82,000 two-sided color folded postcards for the 2027 Recycling Calendars. The project requires the production of 40,000 red and 40,000 blue calendars on 80# matte cover stock, which must be sealed with fugitive glue or wafer seals to comply with USPS automation mailing regulations. The selected contractor is responsible for processing the mailing lists to achieve the best USPS Marketing Mail rates, including NCOA and Class certification, and must ensure all postcards are mailed from a Greensboro USPS location by December 4, 2026. Any overruns of unaddressed postcards must be delivered to the Solid Waste and Recycling Department at 401 Patton Avenue. The contract will be awarded to the lowest responsive and responsible bidder. Interested companies must submit their responses via the Greensboro eProcurement System by September 24, 2026, at 2:00 PM EST. Required submission materials include a statement of qualifications, a sample of similar work, at least three references, a copy of the company's NCOA license, and a bid form covering printing, processing, mailing, and postage costs. Bidders must also provide a statement confirming the bid remains valid for three months and acknowledge all RFB addenda. The City also applies a Local Preference Policy for businesses within the Guilford County Economic Development Alliance area and maintains a strict non-discrimination policy for all contracted entities.

City of Greensboro

POSTED

about 19 hours ago

DEADLINE

Postcard Printing Services

Department of Driver Services

POSTED

about 20 hours ago

DEADLINE

POSTCARD PRINTING, MAILING AND FULFILLMENT

Solicitation # 47500-eRFQ-001991-2027

The Georgia Department of Driver Services is soliciting quotes under solicitation number 47500-eRFQ-001991-2027 for postcard printing, mailing, and fulfillment services. The request opened on September 11, 2026, with a response deadline of September 19, 2026. The contract features an initial one-year term from the date of award, with the state entity retaining the option to renew for four additional one-year periods. Qualified suppliers must demonstrate a minimum of five years of experience and provide documentation of prior client references. Evaluation criteria include supplier responsibility, integrity, and cost, with a specific preference granted to suppliers domiciled in the State of Georgia. Mandatory submission requirements include a completed cost worksheet, a Sales and Use Tax compliance form, a bid bond, and a proposal certification and certificate of non-collusion. Additionally, bidders must disclose any business litigation from the past five years and any history of suspension or debarment from government contracting. All responses must be submitted through the GA@WORK Marketplace.

Department of Driver Services

POSTED

about 20 hours ago

DEADLINE

Secure Card Manufacturing & Personalization

POSTED

about 21 hours ago

DEADLINE

in about 2 months

Card Production and Image Capture Services Provider

Solicitation # rfxx_20330

The Government of Ontario Ministry of Transportation is seeking a Card Production and Image Capture Services Provider under solicitation rfxx_20330. The scope of work encompasses the full lifecycle of end-to-end services, including image capture, secure card design, production, personalization, quality assurance, and distribution. The contract is structured around three primary categories of requirements: operational expectations for day-to-day service delivery, transition obligations for the assumption and transfer of services, and a governance model for oversight and accountability. The provider must manage sensitive personal and health information within a secure environment and adhere to strict quality and biometric standards, including ISO/IEC 14298-2021, ISO/IEC 7810, and AAMVA specifications. The selection process is based on a Best Score strategy across four stages. Stage 2 evaluates technical requirements, focusing on core production capabilities, supply chain security, and business responsiveness. Stage 3 involves demonstrations of image capture and card production use cases, requiring a minimum score of 75 percent to proceed. Stage 4 evaluates the commercial response using a relative pricing formula, with a price outlier rule that awards zero points if a bid exceeds the median price by more than 50 percent. The successful vendor must demonstrate experience in high-volume, secure public service environments, maintain a Canada-based operational footprint, and comply with Ontario's occupational health and safety and tax regulations. Delivery of produced cards is to be handled via Canada Post or other approved providers.

POSTED

about 21 hours ago

DEADLINE

in about 2 months

Commercial Printing - Multi-page Booklets

POSTED

about 21 hours ago

DEADLINE

Commercial Printing - Marketing Collateral

POSTED

about 21 hours ago

DEADLINE

ODP Printing Services

Solicitation # 1368

The State of Idaho, on behalf of the Office of Drug Policy, is soliciting bids under ITB 1368 for a contractor to provide ongoing, as-needed marketing, administrative, and operational printing services. The scope of work includes the production of various materials such as trifold and half-fold brochures, rack cards, four-page booklets, stickers, flyers, magnets, folders, posters, retractable banners, wall clings, and table tents. The resulting contract will be issued as a Blanket Purchase Order through the Luma ERP system. Award will be based on the lowest responsible bidder, with a 10 percent cost preference applied for evaluation purposes to bids produced outside the State of Idaho. Contractors must adhere to strict delivery timelines, finalizing specifications within two days of an order and delivering materials within five to ten business days. All shipments are F.O.B. Destination, with specific packaging requirements for booklets and stickers. The contractor must provide a minimum one-year warranty on all printed materials and maintain a maximum production overrun of 10 percent. Mandatory insurance requirements include Commercial General Liability with a 1 million dollar per occurrence and 2 million dollar aggregate limit, Commercial Automobile Liability of 1 million dollars, and Workers Compensation. Pricing must remain firm for the initial one-year term, with potential adjustments considered twice per year thereafter.

POSTED

about 21 hours ago

DEADLINE

Textbook Printing and Physical Production

FA3300 42 Cons Cc

POSTED

about 23 hours ago

DEADLINE

Toro Printer Label Tape

Solicitation # N0018926QL395

This solicitation, issued by the Department of Defense via the Navsup Flt Logistics Ctr Norfolk, is for the procurement of Toro Printer Label Tape. The request is specifically for Graphic Products Duralabel supplies, consisting of 50 units of T4-3001 white premium label tape and 25 units of 4431110 black premium ribbons. Due to the specific brand requirements, competition is precluded for this acquisition. The solicitation, identified by number N0018926QL395 and NAICS code 323111, was posted on September 11, 2026, with a response deadline of September 12, 2026. The place of performance is located in Colts Neck, New Jersey. Primary contact for this requirement is Vladimir Pierre-Charles.

Navsup Flt Logistics Ctr Norfolk

POSTED

about 23 hours ago

DEADLINE

in about 1 hour

Pub10050LSMedicareandYou2027LargePrintSpanish

Solicitation # Pub10050LSMedicareandYou2027LargePrintSpanish451846R1(2026)

The United States Government Publishing Office, specifically the Customer Services agency in Washington, DC, is soliciting bids for the production of the 2027 Large Print Spanish edition of Medicare and You. This combined contract requires comprehensive services including desktop publishing, proofing, 4 color printing at Quality Level III, binding, and shipping or mailing to various destinations. Interested parties must submit their responses by September 14, 2026. The project falls under NAICS code 323111 and is managed by primary point of contact Carey Joseph. Detailed specifications for this production requirement are available through the official GPO vendor portal.

Customer Services

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Defense → SPRMM1 DLA Mechanicsburg

Same awarding agency

Technical Documentation & Reverse Engineering Services

Engineering Services

POSTED

about 23 hours ago

DEADLINE

Pressure Transmitter Supplier

Irradiation Apparatus Manufacturing

POSTED

about 23 hours ago

DEADLINE

Chain Hoist Manufacturer/Supplier

Other Commercial and Service Industry Machinery Manufacturing

POSTED

about 23 hours ago

DEADLINE

SPRMM1-26-Q-GC63-CHAIN HOIST

Solicitation # SPRMM1-26-Q-GC63

Solicitation SPRMM1-26-Q-GC63, issued by DLA Mechanicsburg, is a request for quotations for two chain hoists, identified by NSN 7HH 3950-01-702-6959 and reference number 8196788-2. This procurement is designated as a high-priority requirement to support a US Navy CASREP due to mission-essential equipment breakdown. The delivery is required as soon as possible on an FOB Destination basis, with the primary shipment destination being the USS John P Murtha LPD 26. The contractor must ensure all items are new and unused, adhering to strict packaging and marking standards including MIL-STD-2073, MIL-STD-129, and MIL-STD-130. Inspection and acceptance will occur at the origin. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Offerors who are not the original equipment manufacturer must provide the OEM CAGE code and evidence of product traceability. The solicitation is not a small business set-aside, and the evaluation will be conducted based on the criteria for part-numbered items.

Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 23 hours ago

DEADLINE

TRANSMITTER,PRESSUR

Solicitation # SPRMM126QKH36

This fixed-price solicitation from DLA Mechanicsburg is for the manufacture and supply of a pressure transmitter, specifically referencing Cage Code 81349 and part number PGT-GP-100-G2. The contract requires the item to be listed on Qualified Products List 24212, and award evaluations will be based on Lowest Price Technically Acceptable criteria. Contractors must provide an informal cost breakdown to determine fair pricing and must identify the Original Equipment Manufacturer if they are not the manufacturer themselves. Key administrative requirements include the mandatory use of Wide Area Workflow for combined invoice and receiving reports and CMMC Level 1 self-certification for cybersecurity. All items must be physically identified per MIL-STD-130 and packaged according to MIL-STD 2073. The government mandates that any changes in production facilities be approved in writing by the Contracting Officer and may require a fee to cover administrative costs. Authorized distributors must provide proof of authorization on company letterhead to be considered for the award.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 23 hours ago

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # SPRMM126QKG67

This solicitation is for the manufacture and procurement of a circuit card assembly, identified by CAGE code 3SDB5 and reference number 937E343G1. The contract is issued by the Defense Logistics Agency (DLA) Mechanicsburg and will be awarded based on the Lowest Price Technically Acceptable (LPTA) criteria. The current deadline for the submission of quotes has been extended to October 13, 2026. Key requirements include adherence to ISO9001 quality standards, MIL-STD-130 for physical identification, and MIL-STD 2073 for packaging. All invoicing and receiving reports must be submitted electronically via PIEE-WAWF. Offerors who are not the original equipment manufacturer must identify the OEM and their CAGE code. Additionally, authorized distributors must provide proof of authorization on company letterhead to be considered for the award.

Bare Printed Circuit Board Manufacturing

POSTED

DEADLINE

in about 1 month

PUMP UNIT,CENTRIFUG

Solicitation # SPRMM126RMC71

This solicitation, issued by DLA Weapons Support Mechanicsburg, is for the manufacture and procurement of a Centrifugal Pump Unit, identified by NSN 4320-012274925 and part number 5773203-24. The requirement specifies that the unit must meet the design and performance standards of drawing 5773203-24 from the Naval Sea Systems Command (CAGE 53711). The procurement is a fixed-price effort utilizing Lowest Price Technically Acceptable (LPTA) criteria for award evaluations. Key quality requirements include higher level inspection, with source inspection required at the manufacturing facility, and physical identification in accordance with MIL-STD-130. The solicitation has undergone several amendments, including the incorporation of Emergency Acquisition Flexibilities, the dissolution of the small business set-aside, and an increase in quantity with the addition of CLIN 0001AC. The final deadline for the receipt of proposals was established as September 15, 2026, at 4:00 pm EST. Contractors are required to submit invoices and receiving reports via the PIEE-WAWF system. Additionally, any offeror who is not the original equipment manufacturer must identify the OEM and their CAGE code. All contractual documents are considered issued upon transmission via mail, facsimile, or electronic commerce methods.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

DEADLINE

SERVER,AUTOMATIC DA

Solicitation # SPRMM126QKB48

This solicitation is for the manufacture and procurement of the Server, Automatic DA, identified by part number F109656-C and Cage Code 1BEK6. The contract is issued by the Department of Defense via DLA Mechanicsburg under SEPA-EAF authority. Key requirements include strict adherence to MIL-STD-130 for physical identification and MIL-STD 2073 for packaging. Because the item is intended for use on submarines or surface ships, it must be entirely free of metallic mercury contamination. The procurement process requires electronic submission of invoices and receiving reports through PIEE-WAWF. Offerors who are not the original equipment manufacturer must identify the OEM and their CAGE code. The current deadline for quote submissions is September 29, 2026. Vendors are encouraged to provide quantity price breaks and must provide proof of authorized distribution if they are not the manufacturer. All contractual documents are considered issued when sent via mail, facsimile, or electronic commerce methods.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

Military Standard Marking and Packaging

Marking Device Manufacturing

POSTED

DEADLINE

Oxygen System Component Cleaning Services

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Precision Manufacturing of Cylinder Assembly, A

POSTED

DEADLINE

Material Traceability and Compliance Auditor

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS