Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

University of Alberta - Advanced Contract Award Notice / Notice of Proposed Procurement - New HCS Imaging System and Upgrade To Existing System

Open

AB-2026-07365International

Response Deadline11/13/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The University of Alberta has issued an Advanced Contract Award Notice under solicitation number AB-2026-07365 for the procurement of a new High Content Screening Imaging System and an upgrade to an existing ImageXpress HCS.ai unit. These specialized systems will be utilized at the Cross Cancer Institute's Cell Imaging Facility to provide high resolution, magnification, and rapid plate-imaging speeds. Due to Molecular Devices transitioning its supply chain, Fisher Scientific is identified as the sole provider capable of supplying the required equipment and upgrades. The notice was posted on November 5, 2026, with a response deadline of November 13, 2026, for performance within Alberta, Canada.

General Info

University of Alberta awarding Fisher Scientific contract for imaging systems and equipment upgrades.

Agency

University of Alberta

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

AB, CAN

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhasePresolicitation

PostedNov 5

Presolicitation

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 08:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyUniversity of Alberta

Contacts1 person available

OfficeN/A

Organization / AgencyUniversity of Alberta

Office AddressN/A

Contacts

Satinder AtwalSenior Supply Consultant

contact@example.gov

Full Description

Show more

The University of Alberta is issuing an Advanced Contract Award Notice for the procurement of a new High Content Screening (HCS) Imaging System and an upgrade to an existing ImageXpress HCS.ai unit at the Cross Cancer Institute's Cell Imaging Facility. This specialized imaging system is uniquely designed to deliver rapid plate-imaging speed, high resolution, and magnification. Molecular Devices has transitioned to supplying their imaging systems and upgrades exclusively through Fisher Scientific, making Fisher Scientific the only provider available to supply these items.

Similar Contracts

Same NAICS industry code

Solicitation # SPE8E5-27-T-0441

Solicitation SPE8E5-27-T-0441 is a Request for Quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of one cast iron surface plate. The item measures 12 inches long by 8 inches wide with a single fine scraped surface and must be manufactured using a metal casting process, which requires specific tooling. Technical compliance is governed by Basic Drawing NR 19200 10539026 and Reference GGG-P-453B. The required delivery date is November 3, 2026, with a delivery timeline of 20 days after order. The contract specifies FOB Origin for both inspection and acceptance. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with DLA Master List requirements taking precedence. Palletization must follow RP001 standards. Compliance requirements include Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment and adherence to the Buy American Act and Berry Amendment. All quotes must be submitted via the DIBBS portal by November 16, 2026, and payment will be processed through the Wide Area WorkFlow system.

Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

REFERENCE STANDARD, PHY

Solicitation # SPE4A5-27-T-2813

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

Integrated Semiconductor Inspection Microscope SystemThis subcontract involves the supply and configuration of an Integrated Semiconductor Inspection Microscope System for prime contractors supporting Department of Commerce NIST projects in Boulder. The system must provide magnification ranging from 25x to 1000x via a 6-position multi-objective turret and feature dual manual and computer control. Technical requirements include the integration of a motorized stage, turret, and prism, with support for transmission, reflection, darkfield, and DIC imaging modes. To ensure compatibility with high-precision environments, all materials used must be ISO Class 5 cleanroom compatible. The successful contractor is responsible for delivering a fully operational and installed system. Interested parties should note the response deadline of November 20, 2026, for this procurement categorized under NAICS code 334516.

Department Of Commerce Nist

POSTED

about 8 hours ago

DEADLINE

Spectra-Physics InSight® X3™ Dual Ultrafast Laser System Supply

National Institutes Of Health Olao

POSTED

about 8 hours ago

DEADLINE

Sources Sought Notice for new Microscopes

Solicitation # NIST-SS27-01

The Department of Commerce National Institute of Standards and Technology (NIST) has issued a sources sought notice, solicitation number NIST-SS27-01, to identify capable providers of new microscopes for the Boulder Microfabrication Facility (BMF). These instruments are essential for inspecting substrates and fabricating mission-critical semiconductor devices within an ISO class 5 cleanroom environment. The procurement is categorized under NAICS code 334516, with the place of performance located in Boulder, Colorado. The required systems must support optical techniques common to the semiconductor industry, featuring magnification powers ranging from 25x to 1000x and a multi-objective turret, ideally with six positions. Technical specifications require the equipment to be both fully manually and computer controlled via motorized components, including the stage, turret, and prism. The systems must provide 200 mm of stage travel in both x and y axes, fit on a 3 foot by 3 foot tabletop, and have a weight compatible with a pneumatic floating table. Interested parties must respond by November 20, 2026.

Department Of Commerce Nist

POSTED

about 8 hours ago

DEADLINE

Fit Test Machine

Solicitation # FA303027Q0001

Solicitation FA303027Q0001 is a firm fixed price procurement for five new PortaCount Model 8040 Fit Test Machines to support respiratory protection programs at Goodfellow AFB, Texas. This total small business set-aside requires the delivery of hardware utilizing Condensation Nuclei Counter technology, including all necessary software, operational accessories, and a five-year extended warranty covering routine calibration and repair services. The equipment must be the current production model, free of defects, and arrive fully calibrated with traceable certificates. Technical requirements include a touchscreen interface, connectivity via WiFi, Bluetooth, and USB-C, and pre-programmed automated protocols compliant with OSHA 29 CFR 1910.134 and ANSI/ASSP Z88.10. The contract specifies a delivery timeline of 30 calendar days from the date of award, with FOB Contractor Destination. All items must be uniquely identified using two-dimensional data matrix symbology and labeled according to MIL-STD-129. Administrative requirements include the use of Wide Area WorkFlow for invoicing and adherence to cybersecurity standards under clause 252.204-7012, ensuring software does not require continuous external cloud connectivity. Award will be granted to the responsible offeror whose proposal is most advantageous to the government, considering both price and other factors. Questions are due by November 12, 2026, with a final response deadline of November 18, 2026.

FA3030 17 Cons Cc

POSTED

about 8 hours ago

DEADLINE

CSS - Spectra-Physics InSight X3 Dual Laser System

Solicitation # 75N98027Q00072

The National Institutes of Health, on behalf of the National Heart, Lung, and Blood Institute, is soliciting a firm-fixed-price purchase order for one Brand Name Spectra-Physics InSight X3 Dual Ultrafast Laser System. This equipment will be integrated with an existing Thorlabs Veneto inverted multiphoton microscope to support Fluorescence Lifetime Imaging Microscopy and Stimulated Raman Scattering pump-probe experiments. The requirement includes a rack-mounted power supply, a closed-loop chiller, and essential services such as on-site factory installation, optical alignment, and operator training. Technical specifications require pulses of 100 fs or less, automated wavelength tuning from 680 nm to 1300 nm, and a second synchronized output at 1045 nm, all supported by a 12-month OEM factory warranty. This is a brand-name restricted solicitation under NAICS code 334516, and the requirement is unrestricted. To be considered technically acceptable, offerors other than the Original Equipment Manufacturer must provide an official Letter of Authorization verifying their status as an authorized distributor and confirming that the OEM will honor the installation, training, and warranty. Award will be based on best value, where technical capability, delivery schedule, and past performance are weighted as significantly more important than price. Proposals must be submitted by November 20, 2026, and must include a detailed price breakout, delivery timeframe, and a business size certification.

National Institutes Of Health Olao

POSTED

about 8 hours ago

DEADLINE

Request for Information (RFI) Enhanced Maritime Biological Detection (EMBD) Identification Subsystem (IDS)

Solicitation # W911SR-27-RFI-EIDS

The Department of War, through the Joint Product Manager for Chemical, Biological, Radiological and Nuclear Sensing, is conducting market research via Request for Information W911SR-27-RFI-EIDS to identify industry sources for an Identification Subsystem (IDS). This system is intended as a backward-compatible replacement for the Joint Biological Point Detection System Identifier and will be integrated into the U.S. Navy's Enhanced Maritime Biological Detection system. The IDS must provide automated, confirmatory identification of various Biological Warfare Agents, including bacteria, viruses, and toxins, from liquid samples. Key technical requirements include a compact, modular enclosure suitable for shipboard installation, the use of military-standard circular connectors, and compliance with naval surface ship environmental profiles, specifically referencing MIL-STD-810H and MIL-STD-461. Interested respondents must submit a PDF response no later than December 7, 2026, including organization details, a capability statement, a gap analysis, and a Rough Order of Magnitude for cost and schedule. To access the restricted CUI Technical Specification Summary, vendors must provide evidence of security compliance, including a CMMC Level 2 self-assessment and adherence to DFARS 252.204-7012 and 252.204-7019/7020. Responses are limited to ten pages and must be sent to the designated Contract Specialist and Contracting Officer. This RFI is for planning purposes only and does not constitute a formal solicitation or a commitment to contract.

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Toptica Laser Amplifier Module

Solicitation # N0017327Q1301397565

Naval Research Laboratory

POSTED

about 8 hours ago

DEADLINE

PCMT 8800 Conflict Monitor Tester Supplier

MODOT ST LOUIS DISTRICT

POSTED

about 14 hours ago

DEADLINE

CHNS/O Analyzer (AZB5006) #174280

Solicitation # 678908-MP

The International Atomic Energy Agency is soliciting bids for the procurement of a CHNS/O Analyzer, identified by reference number AZB5006 and solicitation number 678908-MP. This solicitation was officially posted on November 6, 2026, and is managed by the primary point of contact, Padua. The equipment is intended for use at a performance location situated in Azerbaijan. Interested parties can find further details and submission guidelines through the United Nations Global Marketplace portal.

POSTED

about 20 hours ago

DEADLINE

DNA Sequencing System

Solicitation # SRC0000042921

The Ohio Attorney General’s Office is soliciting bids for a new, commercially available, manufacturer-supported DNA sequencing system for the Bureau of Criminal Identification. The system must be capable of human whole-genome sequencing to support forensic genetic genealogy applications. Key technical requirements include a benchtop footprint not exceeding 30 inches in all dimensions, a maximum weight of 350 lbs, an output range between 10 Gb and 540 Gb per run, and the ability to complete sequencing runs within 48 hours with read lengths up to 2 x 300 bp. The selected vendor is responsible for the furnishing, delivery, installation, configuration, testing, and training of the system, as well as the removal of all packing materials. The contract requires the provision of consumables sufficient to process approximately 50 samples during the first two years of operation. Award will be granted to the lowest responsive and responsible bidder based on verifiable capabilities. The agreement includes a minimum one-year manufacturer warranty, with a requirement for bidders to price extended warranty and support for a total of five years of coverage. All responses must be submitted online via the Ohio Buys portal and must remain valid for at least 60 days from the quote due date. The vendor will operate as an independent contractor, assuming responsibility for all business expenses and insurance, including Workers' Compensation and Unemployment Compensation.

Attorney General, Ago461700 Bci Laboratory Bciihq

POSTED

DEADLINE

More opportunities from University of Alberta

Same awarding agency

University of Alberta - Advanced Contract Award Notice / Notice of Proposed Procurement - Zero Waste Stations

Solicitation # AB-2026-07400

POSTED

about 3 hours ago

DEADLINE

University of Alberta - Advanced Contract Award Notice / Notice of Proposed Procurement - Franka Emika Research 3, Robot Arms

Solicitation # AB-2026-07394

POSTED

about 5 hours ago

DEADLINE

University of Alberta - Advanced Contract Award Notice / Notice of Proposed Procurement - Qube-Seivo 3 Lab Bundle

Solicitation # AB-2026-07392

POSTED

about 5 hours ago

DEADLINE

University of Alberta - Request for Proposal - Five (5) Axis Simultaneous Computer Numerical Control (CNC) Machining Centre

Solicitation # AB-2026-07371

The University of Alberta, on behalf of the Faculty of Science Department of Physics, is seeking proposals for the supply and installation of a Five Axis Simultaneous Computer Numerical Control CNC Machining Centre. This equipment will be utilized for the manufacturing of developmental prototypes and experimental research. The selected proponent will be responsible for the delivery, installation, and associated setup of the system. This solicitation, identified as AB-2026-07371, was posted on November 5, 2026, with a response deadline of November 30, 2026, at 8:00 PM. The project will be performed in Alberta, Canada. Interested parties may contact Senior Supply Consultant Satinder Atwal for further information regarding the submission process.

Machine Tool Manufacturing

POSTED

DEADLINE

University of Alberta - Advanced Contract Award Notice / Notice of Proposed Procurement - ACAN 2026-0177 Accend Surgical Lights

Solicitation # AB-2026-07348

The University of Alberta has issued an Advanced Contract Award Notice, solicitation number AB-2026-07348, for the procurement of Accend surgical lights. The university has identified Stryker Canada as the recommended supplier for this equipment. This selection is based on the manufacturer's ability to provide seamless integration with the facility's existing infrastructure, including power requirements, wiring, wall-mounted controls, and Stryker bases. By selecting Stryker Canada, the university aims to ensure full compatibility with its current setup while avoiding additional costs, installation delays, or the need for structural modifications. The pre-solicitation was posted on November 4, 2026, with a response deadline of November 10, 2026. The procurement is being managed by Supply Consultant Rashmi Sharma for performance in Alberta, Canada.

Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

DEADLINE

University of Alberta - Request for Proposal - RFP 2026-0165 Saville Community Sports Centre (West) Mechanical Preventative Maintenance Services

Solicitation # AB-2026-07289

The University of Alberta is seeking qualified proponents to establish an all-inclusive Mechanical Preventative Maintenance Services program for the Saville Community Sports Centre (West) located in Alberta, Canada. This solicitation, identified as RFP 2026-0165, requires service providers to have demonstrated experience in delivering ongoing mechanical maintenance to ensure the facility's operational efficiency. Interested parties must submit their responses by the deadline of November 27, 2026. The procurement process is being managed by Joe Rollheiser, the primary point of contact and Supply Consultant for the university.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

University of Alberta - Request for Proposal - RFP 2026-0165 Saville Community Sports Center (West) Mechanical Preventative Maintenance Services

Solicitation # AB-2026-07284

The University of Alberta is seeking qualified proponents to establish an all-inclusive Mechanical Preventative Maintenance Services program for the Saville Community Sports Centre (West) located in Alberta, Canada. This solicitation, identified as RFP 2026-0165, requires a provider with demonstrated experience to manage ongoing mechanical maintenance to ensure the facility's operational efficiency. Interested parties must submit their responses by the deadline of November 27, 2026, at 8:00 PM. The procurement process is being managed by Supply Consultant Joe Rollheiser, and detailed bid documents are available through the official purchasing portal.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

University of Alberta - Request for Proposal - TES 5kV VARIABLE FREQUENCY DRIVES REPLACEMENT

Solicitation # AB-2026-07273

The University of Alberta is seeking proposals from experienced contractors to perform 5kV Variable Frequency Drive replacements at the Thermal Energy Storage Facility. This project requires specialized expertise in medium voltage electrical construction, specifically within industrial and utility environments. Interested parties must submit their proposals by the deadline of November 24, 2026. The solicitation, identified as AB-2026-07273, is managed by Supply Consultant Joshua Cunningham and involves work to be performed in Alberta, Canada.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

University of Alberta - Request for Proposal - HPR1200H and HPR4800OH DuPont Amberlite Resin

Solicitation # AB-2026-07262

The University of Alberta is seeking proposals for the supply of 210 cubic feet of HPR1200H and 210 cubic feet of HPR4800OH DuPont AmberLite Resin for its Utility Services department. This procurement is part of the C&D Demineralizer replacement project and is intended to ensure system compatibility and performance by matching the resin previously installed in the A&B Demineralizer trains. Utilizing the same resin type minimizes storage requirements at the Heating Plant and reduces the risk of operational errors associated with managing multiple resin varieties. This solicitation, identified as AB-2026-07262, was posted on November 2, 2026, with a response deadline of November 17, 2026. The project will be performed in Alberta, Canada. Interested parties may contact Supply Consultant Jason Watamaniuk for further information regarding the submission process.

Other Chemical and Allied Products Merchant Wholesalers

POSTED

DEADLINE

University of Alberta - Request for Proposal - RFP 2026-0168 Undergraduate Admissions Unit Review

Solicitation # AB-2026-07203

The University of Alberta is seeking an external consultant to perform a comprehensive operational assessment of the Undergraduate Admissions Unit within the Office of the Registrar. The selected consultant will evaluate the unit's current operational structure, systems, workflows, and processes to ensure they align with evolving enrollment goals and applicant service expectations. The scope of the review covers critical functions including application evaluation, documentation review, inquiry management, and the application of program-specific admission criteria for both domestic and international students. This solicitation, identified as RFP 2026-0168, was posted on October 29, 2026, with a response deadline of November 13, 2026. The project will be performed in Alberta, Canada. Interested parties may contact Supply Consultant Anuar Rivero for further information regarding this procurement opportunity.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

University of Alberta - Request for Proposal - Mobile Bimanipulation Robotic Equipment

Solicitation # AB-2026-07195

The University of Alberta is seeking proposals for the procurement of a Mobile Bimanipulator to support Embodied AI and Robotic Manipulation Research within the Faculty of Engineering, Electrical and Computer Engineering Department. The selected proponent will be responsible for supplying the specialized robotic equipment and providing the necessary virtual training to ensure effective implementation for research purposes. This solicitation, identified by number AB-2026-07195, was posted on October 29, 2026, with a response deadline of November 16, 2026. The project will be performed in Alberta, Canada, and interested parties may coordinate with the primary point of contact, Senior Supply Consultant Satinder Atwal.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

University of Alberta - Request for Proposal - South Academic Building (SAB) Basement Level Electrical Upgrade Project

Solicitation # AB-2026-07182

The University of Alberta is seeking proposals for the South Academic Building Basement Level Electrical Upgrade Project, solicitation number AB-2026-07182. The project involves replacing aging sectionalizer switchgear from the North Power Plant with two new units to be installed in a newly designated electrical room, Room B-52, located in the basement of the South Academic Building in Edmonton. The scope of work includes the necessary structural adjustments to convert the space into a functional electrical room and the installation of the equipment. The project scope is limited to the room conversion and equipment placement; external electrical service connections are excluded as they fall under a separate project. Contractors are responsible for minor patching, repairs, and refinishing of walls and ceilings resulting from mechanical and electrical service alterations or accidental damage. According to the provided documentation, asbestos containing materials have not been identified in the fireproofing, duct mastic, or pipe fittings. Responses to this solicitation are due by November 12, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS