Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from Department Of Homeland Security was posted on January 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

USCG YARD MOV MANIFOLD REPLACEMENT

Closed
70Z08536Q0002722Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611
New
SLED
F&W, 2018 Munson Packman Boat Repower project
Solicitation # 2018 Munson Packman Boat Repower
The Confederated Tribes of the Colville Reservation Fish and Wildlife Department is soliciting proposals for a comprehensive propulsion repower and helm system integration for a 30 foot Munson Packman landing craft. The project requires a factory-certified Honda Marine Authorized Dealer to decommission and remove two existing Honda BF250A outboard engines and replace them with new Honda BF250D Drive-by-Wire outboards. The scope of work is divided into six phases, encompassing the removal of legacy rigging, a structural assessment of the transom, installation of new engines and Honda iST electronic control heads at dual helm stations, integration with the existing SeaStar PA1315-2 Power Assist steering and NMEA 2000 network, and a complete fuel system overhaul using USCG Type A1-15 lines. The project concludes with static diagnostics and a minimum two-hour sea trial to validate performance and safety protocols. The selected contractor must provide a secure facility for vessel storage and adhere to strict insurance requirements, including at least 1 million dollars in commercial general liability and business auto liability. Financial protections include a 25 percent retainage or a performance bond, with a bond being mandatory for contracts exceeding 100,000 dollars. Proposals are due by November 13, 2026, and will be evaluated based on a 100-point scale considering technical capability and budget, with specific preferences given to responsible Indian Offerors under TERO and tribal preference laws. All disputes are subject to the jurisdiction of the Colville Tribal Court, and payments are contingent upon the availability of tribal funds.
Confederated Tribes of the Colville Reservation

POSTED

about 11 hours ago

DEADLINE

in 17 days
NAICS: 336611
New
Federal
TSV4 NARR MESSING AND MODERNIZATION
Solicitation # N0018927QL008
NAVSUP FLT LOG CTR Norfolk is soliciting a firm-fixed-price contract for the development of a drawing package and Bill of Materials (BOM) to support habitability upgrades for the TSV4 Narragansett. The scope of work focuses on the vessel's messing, berthing, stateroom, and sanitary spaces at Joint Expeditionary Base Little Creek-Fort Story in Virginia Beach, Virginia. This effort is strictly limited to assessment and documentation; it specifically excludes any procurement, fabrication, removal, or installation of shipboard components. The project is a total set-aside for small businesses, including service-disabled veteran-owned small businesses, under NAICS code 336611. Key deliverables include a draft drawing package and BOM due 40 calendar days after award, with the final delivery of two electronic files and two full-size paper copies in NAVSEA format due within 61 calendar days. Contractors must adhere to several technical standards, including MIL-STD-2003 for electric plants, MIL-STD-777 for piping, and General Specifications for Overhaul of Surface Ships. A mandatory ship check at Colonna's Shipyard in Norfolk is required for eligibility, and failure to attend will result in disqualification. Award will be based on the best value, evaluating the mandatory ship check on a pass/fail basis and the technical approach on an acceptable/unacceptable basis, with the final selection going to the lowest total evaluated price.
Navsup Flt Logistics Ctr Norfolk

POSTED

about 24 hours ago

DEADLINE

in 8 days

AI Contract Overview

Show more

The Department of Homeland Security's United States Coast Guard Surface Forces Logistics Center (USCG SFLC) intends to award a sole source firm fixed price contract to Young and Cunningham America for the replacement of motor operated valves (MOVs) on the WMSL cutters' fuel transfer manifold. This replacement will involve swapping the existing MOVs with manual valves to enhance system reliability, reduce maintenance requirements, and improve operational flexibility during fueling operations. The procurement follows Federal Acquisition Regulation parts 12 and 13 and is conducted under commercial item procedures, with a sole source justification under FAR 13.106-1(b)(1). This action falls under NAICS code 336611 for shipbuilding and repairing and is not designated as a small business set-aside. The contract calls for specific assemblies and components, including eight assemblies (P/N: 18831-M-4-19), eight lids (P/N: 18831-3), and eight seats (P/N: 18831-2), to be manufactured and delivered by April 1, 2026, to the USCG Yard in Baltimore, Maryland. The parts have a production lead time of 10 weeks. Interested parties are notified that this is not a solicitation or request for proposals, and only responses that provide strong justification for competition will be considered. Inquiries and expressions of interest must be submitted in writing by February 5, 2026, to the contracting officer. Contacts for further information include Ms. Donna O’Neal and EM1 Michael Griffin, with detailed instructions for communications and delivery requirements provided.

General Info

USCG awards sole source contract to Young and Cunningham for valve replacement on WMSL cutters.

NAICS

336611 - Ship Building and Repairing

Place of Performance

Clearwater Beach, MD, 21226, USA

Set-Aside

8A

Documents

2

Quote MOV Manifold NSC Manifold Spares FT-V-004

PDF, High priority: read this first1 page · quote
High

Notice of Intent to Sole Source 70Z08536Q0002722

DOCX, Low priority1 page · notice-of-intent
Low

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Combined Synopsis

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)
Contacts2 people available
OfficeALAMEDA, CA, 94501, USA
Office AddressALAMEDA, CA, 94501, USA

Full Description

Show more




NOTICE OF INTENT TO SOLE SOURCE 70Z08536Q0002722



The Department of Homeland Security {DHS}, United States Coast Guard {USCG} Surface Forces Logistics Center {SFLC}, located at 1 Eagle Road Bldg. 55, Alameda CA 94501 is issuing this Notice of Intent {NOI} to inform industry contractors of the Government's intent to Award a Sole Source Firm Fixed Price {FFP} Contract IAW Federal Acquisition Regulation {FAR} Part 12 and 13 procedures.


The intended Contractor YOUNG AND CUNNINGHAM AMERICA., located at 4040 Roland RD. Katy TX  77493 United States.


USCG SFLC requires: USCG YARD MOV manifold replacement.


This procurement is being conducted using commercial item procedures pursuant to Federal Acquisition Regulation {FAR} Part 12 and FAR Part 13, specifically FAR 13.106-1{b}{1}, allowing the Contracting Officer


{KO} to solicit from one source.


The North American Industry Classification System {NAICS} for this requirement is 336611 - Ship Building and Repairing. The Product of Service Code for this requirement is 2090. This will not be a small business under the Small Business Administration {SBA} size standard for this sector.


This notice of intent is neither a formal solicitation nor a request for competitive proposals. No solicitation document is available, and telephone requests will not be honored. No award will be made on the basis of unsolicited quotations or offers received in response to this notice. Any response to this notice must show clear, compelling and convincing evidence that competition will be advantageous to


the Government. The intent of this synopsis is for informational purposes only. Information received will normally be considered solely for the purpose of determining whether to conduct competitive procurement. A determination by the Government not to complete this action based on this notice is solely within the discretion of the Government.


All inquiries and concerns must be addressed in writing via e-mail to Ms. Oneal at contact@example.gov with the following information referenced in the subject line, Solicitation 70Z08536Q0002722. A determination by the Government not to complete this proposed procurement based on the responses to this notice is solely within the discretion of the Government. Information received will be considered solely for the purpose of determining whether to conduct competitive procurement. All interested parties who are responsible, certified, and capable may identify their interest and may submit an offer or quotation which shall be considered by the agency no later than 8:00 AM Pacific Time


{PST} on Feb 05, 2026, to Ms. Oneal at contact@example.gov


The interested parties bear full responsibility to ensure complete transmission and timely receipt.


STATEMENT OF WORK (SOW)


FOR


MOV Manifold Modifications



WMSL cutters Motor operated valves (MOVs) installed on the fuel transfer manifold were intended to reduce crew workload through remote operation. Operational experience has shown these valves provide limited functionality, increased maintenance burden, and require frequent local manual operation, negating their intended benefit.




Objective:


Replace existing MOVs on the WMSL fuel transfer manifold with manual valves to improve system reliability, reduce maintenance burden, and enhance operational flexibility during fueling evolutions.



Manufacture:


Young and Cunningham America



Items:


Assembly: NSN: N/A, P/N:18831-M-4-19, Qty: 8. 


Lid: NSN: N/A, P/N: 18831-3, Qty: 8.


Seat: NSN: N/A, P/N: 18831-2, Qty: 8.



The part needs to be shipped to:



US COAST GUARD YARD SFLC


ATTN: EM1 MICHAEL GRIFFIN


U.S. COAST GUARD YARD/ BALTIMORE


2401 HAWKINS POINT RD.


BLDG 3


BALTIMORE, MD 21226



Receive parts by 1APR26. The parts have a 10-week lead time.




Please contact EM1 Michael Griffin at +1 (555) 000-0000 or contact@example.gov with questions regarding this SOW.


More opportunities from Department Of Homeland Security → Sflc Procurement Branch 2(00085)

Same awarding agency

NAICS: 811210
Federal
TRS-3D /AN/SPS-75 Radar repairs/ overhaul services
Solicitation # 70Z08526RRJ001B00
The United States Coast Guard Surface Forces Logistics Center is soliciting repair and overhaul services for the AN/SPS-75 Air Search Radar System, specifically for the 418-foot Legend-class National Security Cutter fleet. This is a sole-source acquisition awarded to Northern Defense Industries, LLC, as they are the only authorized U.S. service provider for these proprietary OEM parts and technical data. The scope of work includes the disassembly, inspection, testing, repair, preservation, packaging, and marking of various critical components, such as power supplies, circuit card assemblies, and radar set subassemblies. All repairs must adhere to Original Equipment Manufacturer specifications to maintain operational readiness and system warranties. The contract is structured as a requirements contract with fixed-price delivery orders, consisting of a base period and three one-year ordering periods, with an additional six-month extension option. Performance is primarily conducted at the contractor's facilities, with a strict requirement for items to be preserved for at least two years of warehouse storage and packaged according to military standards. Award is based on technical capability and fair and reasonable pricing, with evaluations focusing on resources, quality assurance, and past performance. Administrative requirements include electronic invoicing via the Invoice Processing Platform and the provision of a dedicated Project Manager to serve as the primary point of contact.
Electronic and Precision Equipment Repair and Maintenance

POSTED

2 months ago

DEADLINE

in about 1 month
View Details
NAICS: 333995
Federal
APPLETON CYLINDER
Solicitation # 70Z08526Q40200B00
Solicitation 70Z08526Q40200B00 is a combined synopsis and request for quote issued by the U.S. Coast Guard Surface Forces Logistics Center for the procurement of specific brand name components from Appleton Marine Inc. This is a Brand Name Only solicitation with no substitutions authorized; therefore, interested vendors must be authorized distributors and provide an authorized distributor letter from the Original Equipment Manufacturer with their quotation. The requirement is a total small business set-aside under NAICS code 333995 and will result in a firm-fixed-price purchase order. The procurement consists of three line items: three Jib Cylinders (NSN 3040 01-F12-2745), four Luff Cylinders (NSN 3040 01-F12-2743), and ten Sheaves (NSN 3020 01-F12-2750). Strict packaging and marking standards apply, including MIL-STD-2073-1E Method 10 for cylinders and ASTM D5118 fiberboard boxes for sheaves, with all items requiring marking per MIL-STD-129R and barcoding per ISO/IEC-16388-2007. Delivery is required by September 30, 2026, to the USCG Surface Forces Logistics Center in Baltimore, Maryland, with shipping terms set as FOB Destination. Offers will be evaluated based on price and the ability to meet the brand name and authorized distributor requirements. Successful contractors must submit invoices through the Invoice Processing Platform with payment terms of Net 30. All submissions must include the vendor's Unique Entity Identifier and CAGE code, and offerors must maintain current representations and certifications in the System for Award Management.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

3 months ago

DEADLINE

in 9 months
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS