The United States Coast Guard Surface Forces Logistics Center, Contracting and Procurement Branch 1, intends to issue a Commercial Request for Quote (RFQ) for Dry Dock Repairs to the USCGC CONFIDENCE (WMEC 619), a 210 FOOT "A' CLASS MEDIUM ENDURANCE CUTTER. The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items. The NAICS Code is 336611 and the small business size standard is less than 1,000 employees. The acquisition will be issued as a 100% Service Disabled Veteran Owned (SDVOSB) Small Business Set- Aside, Best Value Request for Quote (RFQ), on or about November 23, 2010. The RFQ will be issued via the Federal Business Opportunity (FEDBIZOPPS) web page at www.fbo.gov. This requirement will be evaluated using past performance as an evaluation factor. Hard copies of the specification and solicitation will not be issued. It is incumbent upon contractors to monitor the FEDBIZOPPS web page for RFQ release and all subsequent amendments. FEDBIZOPPS also contains an optional automatic notification service. A CD-ROM containing all applicable drawings will be available free of charge to contractors upon request not later than six (6) days from the solicitation issuance. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc). The acquisition is for DRY DOCK repairs to the USCGC CONFIDENCE (WMEC 619), a 210 FOOT "A' CLASS MEDIUM ENDURANCE CUTTER. All work shall be at the contractor's certified facility. The performance period is scheduled for 80 days and is expected to start on or about February 15, 2011. The scope of the acquisition will include, but is not limited to: WORK ITEM 1: Appendages (U/W), Leak Test WORK ITEM 2: Appendages (U/W), Internal, Preserve WORK ITEM 3: Fairwaters and Rope Guards, Propulsion Shaft, Inspect WORK ITEM 4: Chain Locker, Preserve 100% WORK ITEM 5: Tanks (Aviation Fuel Service), Clean WORK ITEM 6: Tanks (Aviation Fuel Service), Inspect WORK ITEM 7: Tanks (MP Fuel Service), Clean WORK ITEM 8: Tanks (MP Fuel Service), Inspect WORK ITEM 9: Tanks (Potable Water), Clean and Inspect WORK ITEM 10: Potable Water Pneumatic Tanks, Clean and Inspect WORK ITEM 11: Tanks (Potable Water), Preserve "Partial" WORK ITEM 12: Grey Water Holding Tanks, Clean and Inspect WORK ITEM 13: Grey Water Piping, Clean and Flush WORK ITEM 14: Sewage Holding Tanks, Clean and Inspect WORK ITEM 15: Propulsion Shafting, Strain Gage Alignment Inspections WORK ITEM 16: Propulsion Shafting; Remove, Inspect, and Reinstall WORK ITEM 17: Propulsion Shaft Coating, Renew WORK ITEM 18: Propulsion Shafting, Straighten WORK ITEM 19: Propulsion Shaft Seals (Mechanical), Overhaul WORK ITEM 20: Propeller Shaft Sleeve(s), Renew WORK ITEM 21: Propulsion Shaft Bearings (External), Renew WORK ITEM 22: Propulsion Stern Tube Bearings, Renew WORK ITEM 23: Stern Tube Interior Surfaces, Preserve 100% WORK ITEM 24: Controllable Pitch Propeller System, General Maintenance WORK ITEM 25: Controllable Pitch Propeller Hub Assembly, General Maintenance WORK ITEM 26: Rudder Assembly; Remove, Inspect and Reinstall WORK ITEM 27: Transducer, Fathometer, Renew WORK ITEM 28: Transducer, Doppler Speed Log, Renew WORK ITEM 29: Sea Strainers; Duplex, Overhaul WORK ITEM 30: Fuel Manifold, Overhaul WORK ITEM 31: Compressed Air Receivers; Clean, Inspect, and Test WORK ITEM 32: Firemain Valve, Renew WORK ITEM 33: Sea Valves and Waster Pieces, Overhaul or Renew WORK ITEM 34: Ultrasonic Testing, Hull Plating (U/W Body) WORK ITEM 35: Cathodic Protection, Zincs, Renew WORK ITEM 36: Perform Ultrasonic Thickness Measurements - Steel Plating WORK ITEM 37: U/W Body, Preserve ("100%") WORK ITEM 38: Freeboard, Preserve, Partial WORK ITEM 39: Superstructure, Preserve, Partial WORK ITEM 40: Decks - Exterior, Forecastle, "MIL-Spec/Flight Deck" System WORK ITEM 41: Bilge (Machinery Space), Preserve WORK ITEM 42: Davit Control Console, Single Point, Upgrade WORK ITEM 43: Davit, Single Point, Level 2 Inspect and Repair WORK ITEM 44: Anchor Windlass Maintenance, Port and Starboard WORK ITEM 45: Ammunition Elevator (Level 2), Inspect, Repair and Test WORK ITEM 46: Sewage Piping, Renew WORK ITEM 47: Water Tight Doors (Internal DC Deck and Below), Renew WORK ITEM 48: Watertight Doors (External), Renew WORK ITEM 49: Bulkhead, Laundry Room (1-20-0-Q), Repair WORK ITEM 50: Bulkhead and Deck Plating (1-FP-0-A), Renew WORK ITEM 51: Bulkhead Plating (1-138), Renew WORK ITEM 52: Transverse Bulkhead (3-52-0-Q), Repair WORK ITEM 53: Deck Plating, Passageway (1-52-01-L), Renew WORK ITEM 54: Galley Deck (1-146-0-Q), Renew WORK ITEM 55: Fore Peak Tank Vent, Renew WORK ITEM 56: Anchor Windlass Foundation, Renew WORK ITEM 57: Magnetic Compass Foundation, Inspect and Repair WORK ITEM 58: Deck and Bulkhead Plating, Gear Locker (1-162-1-A), Renew WORK ITEM 59: Gunwale Stiffener, Renew WORK ITEM 60: Anchor Chain Fairlead and Cats Pawl Base, Renew WORK ITEM 61: Fan Room (1-63-1-Q), Refurbish WORK ITEM 62: Drydocking WORK ITEM 63: Temporary Services, Provide WORK ITEM 64: Sea Trial Performance, Provide Support WORK ITEM 65: Weather Door, CIC - Renew WORK ITEM 66: Bilge (Aft Steering), Repair WORK ITEM 67: Bilge (Armory), Repair WORK ITEM 68: Bilge (Engine Room), Repair WORK ITEM 69: Bilge (Flammable Liquid Stores), Repair WORK ITEM 70: Bilge (Sewage Disposal), Repair WORK ITEM 71: Fuel Oil Piping, Renew WORK ITEM 72: Deck Plating (Fan Room), Renew No geographic restrictions. All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. All responsible sources may submit an offer which will be considered by the government
