Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

USMMA - Generator replacement for Barry & Jones Hall

Forecast

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Maritime Administration is seeking a contractor to replace the emergency generator system and automatic transfer switch at the USMMA campus in Kings Point. The project involves the removal and disposal of a Cummins 600 kW diesel generator and an Onan OTPC 800-amp ATS, followed by the installation and commissioning of new 600 kW and 800-amp replacements. The scope of work includes all necessary electrical, fuel, exhaust, grounding, and control connections, with a strict requirement to adhere to applicable codes and historic property standards. This opportunity is forecasted as a total small business set-aside under NAICS code 335999. The project is managed by the Department of Transportation and is intended to ensure reliable standby power for Barry and Jones Hall.

General Info

Replace 600kW generator and 800-amp ATS at USMMA campus for small business contractors.

Agency

Department of Transportation → Maritime Administration

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component Manufacturing

Place of Performance

Kings Point, NY, USA

Set-Aside

SBA

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseForecast

PostedSep 16

forecast

Prepare for this forecast

Research the agency, track this forecast, and prepare your capture plan before the solicitation opens.

Organization & Contact Information

Show more

AgencyDepartment of Transportation → Maritime Administration

Contacts2 people available

OfficeN/A

Organization / AgencyDepartment of Transportation → Maritime Administration

Office AddressN/A

Contacts

Matthew Quinn

contact@example.gov

Tsedey Aragie

contact@example.gov

Full Description

Show more

Replace the existing emergency generator system and automatic transfer switch (ATS) at USMMA. The existing system consists of a Cummins 600 kW diesel generator set and an Onan OTPC 800-amp ATS. The requirement includes removal and disposal of the existing equipment; installation of a new 600 kW diesel standby generator and 800-amp ATS; associated electrical, fuel, exhaust, grounding, and control connections; and system testing and commissioning. Work will be performed on the historic USMMA campus and must comply with applicable codes, standards, and historic property requirements.

Similar Contracts

Same NAICS industry code

Medium Voltage Cable SupplierThis subcontract agreement establishes a partnership for the supply of shielded medium voltage power cables to support prime contractors on SFO AirTrain projects. The selected supplier is responsible for the manufacture and delivery of 500 Kcmil and 4/0 AWG cables directly to the project site via cable reels. To ensure safety and performance, all materials must strictly adhere to AEIC CS8, IEEE, and UL 1072 standards, as well as ICEA S-93-639 specifications. Managed by the California Design and Construction Electrical Engineering agency, the solicitation was posted on November 6, 2026, with a response deadline of December 8, 2026.

Design and Construction - Electrical Engineering

POSTED

DEADLINE

in about 1 month

ДК 021:2015: 31150000-2 - Баласти для розрядних ламп чи трубок (Інвертор (перетворювач) DC-AC)

Solicitation # UA-2026-11-06-015318-a

This solicitation, identified by number UA-2026-11-06-015318-a, is issued by the Talnivskyi Professional College of Applied and Innovative Technologies of the Uman National University under the Government of Ukraine. The contract focuses on the procurement of DC-AC inverters, specifically categorized as ballasts for discharge lamps or tubes. The opportunity was posted on November 6, 2026, with a response deadline set for November 11, 2026. Performance of the contract will take place in Talne, Zvenyhorodskyi district, Cherkasy region, Ukraine. Interested parties may coordinate with the primary point of contact, Liliia Udovychenko, via the provided email or phone details.

ВІДОКРЕМЛЕНИЙ СТРУКТУРНИЙ ПІДРОЗДІЛ «ТАЛЬНІВСЬКИЙ ФАХОВИЙ КОЛЕДЖ ПРИКЛАДНИХ ТА ІННОВАЦІЙНИХ ТЕХНОЛОГІЙ УМАНСЬКОГО НАЦІОНАЛЬНОГО УНІВЕРСИТЕТУ»

POSTED

DEADLINE

Emergency Trip Station Equipment Manufacturer/SupplierThis subcontract opportunity is for a manufacturer and supplier to provide Emergency Trip Station assembly components for prime contractors working on Maryland Department of Transportation Maryland Transit Administration traction power substation projects. The selected vendor will be responsible for the manufacture and delivery of external emergency trip enclosures, which must include access control, emergency trip push buttons, associated switches, and required warning labels. To ensure safety and quality standards, all components must be UL-listed and enclosures must be NEMA-rated. Additionally, the supplier is required to provide Build America Buy America certification for all delivered hardware. Interested parties should note the response deadline of November 19, 2026.

POSTED

DEADLINE

Зарядна станція

Solicitation # UA-2026-11-06-014813-a

Kryvyi Rih National University, acting under the Government of Ukraine, has issued a solicitation for the procurement of a charging station. The tender, identified by solicitation number UA-2026-11-06-014813-a, was posted on November 6, 2026, with a response deadline set for November 11, 2026. The performance of the contract and delivery of the equipment will take place in Kryvyi Rih, Dnipropetrovsk Oblast, Ukraine. A critical requirement of this contract is the restriction on the origin of the goods; the charging station cannot originate from the Russian Federation, the Republic of Belarus, or the Islamic Republic of Iran. Interested parties may coordinate with the primary point of contact, Andriy Bondarets, via the provided email or phone details.

Криворізький національний університет

POSTED

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication of special purpose electrical cable assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The selected manufacturer must produce assemblies in strict accordance with Drawing 13096754 and TDP Rev A Gen 1, utilizing MIL-STD-1916 for sampling and MIL-STD-2073-1E for packaging. The final deliverable consists of completed and packaged cable assemblies to be performed in New Cumberland. To be eligible, contractors must maintain ISO 9001:2015 certification and hold US/Canada Joint Certification Program (JCP) status to ensure authorized access to ITAR and EAR regulated data. This opportunity falls under NAICS code 335999 and is managed by the Department of Defense. Interested parties must submit their responses by November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Stave-Shaped Bearing Fabrication (UHMW-PE)This subcontract, issued by the DLA Weapons Support Fluid Handling Division for the Department of Defense, involves the fabrication and supply of 54 precision-machined stave-shaped bearings. These components are intended for prime contractors on NAVSEA projects and must be manufactured from Ultra High Molecular Weight Polyethylene in accordance with ASTM D4020 and NAVSEA-005-A-23 standards. The contractor is required to strictly adhere to DWG 7383644, Figure 8, ensuring the capability to maintain precise geometry and tolerances for NAVSEA P/N 566-6985431-5 and Electric Boat P/N H6230503A-5. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 335999, with the place of performance located in New Cumberland. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Radio Frequency (RF) Cable Assembly SupplierThis subcontract through the Department of Defense DLA Weapons Support ASC Commodities Division requires the supply of two radio frequency cable assemblies matching NSN 5995-01-217-1323. The supplier is responsible for manufacturing or sourcing these items for prime contractors supporting DLA Distribution supply contracts, with delivery terms set as FOB Origin and performance located in New Cumberland. Strict adherence to military standards is required, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Additionally, the provider must ensure full compliance with DFARS 252.204-7016 concerning the prohibition of certain telecommunications equipment. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026, under NAICS code 335999.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Electrical Coil Assembly Fabrication (NSN 5950-01-683-2226)This subcontract involves the full fabrication and assembly of 35 electrical coil assemblies for the DLA Weapons Support Maritime Supply Chain. The scope of work includes winding conductive wire, applying insulating coatings, and assembling the coils into housings in strict accordance with NSN technical data packages. The contractor is expected to utilize automatic coil winding machines and electrical testing equipment to ensure all units are completed, tested, and packaged for delivery. The project requires strict adherence to quality standards, specifically MIL-STD-1916 or ASQ H1331. Performance will take place in Tracy, California, under NAICS code 335999. Interested parties must respond by November 16, 2026, to provide the necessary components for these Department of Defense maritime supply chain projects.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Approved Raw Materials/Sub-components for NSN 5930-01-309-9087This subcontract involves the supply of approved raw materials and sub-components for NSN 5930-01-309-9087, supporting the DLA Weapons Support Electrical Devices Division under the Department of Defense. The scope of work includes providing aerospace-grade metals, seals, internal electrical components, and housings that adhere to limited rights data specifications. To ensure a strict traceability chain, the provider must deliver Certificates of Conformance and detailed material test reports alongside the certified materials or sub-assemblies. The project is categorized under NAICS code 335999, with the place of performance located in San Diego, California. Interested parties must note the response deadline of November 16, 2026, following the posting date of November 6, 2026.

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Manufacturing of Radio Cable Assemblies (PN 4364202-15)This subcontract involves the fabrication of six radio cable assemblies, specifically Part Number 4364202-15, to support DLA Land and Maritime supply contracts. The work must be performed in accordance with BAE Systems Land and Armaments L.P. specifications and the DLA Master List, utilizing precision soldering and crimping equipment. All finished products must be labeled and delivered according to MIL-STD-129 standards. The project is managed under the Department of Defense through the LSO Combat Vehicles and Armament agency, with performance located in New Cumberland. To be eligible, the contractor must maintain NIST SP 800-171 compliance and ensure proper SPRS posting. The solicitation was posted on November 6, 2026, with a response deadline of November 10, 2026.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supplier of Electrical Textile Sleeving (NSN 5970-01-350-2102)This subcontract involves the supply of 184 feet of electrical textile sleeving for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing material that strictly adheres to NSN 5970-01-350-2102 specifications and complies with the Buy American Act. Quality assurance is a critical component of the agreement, requiring sampling performed according to MIL-STD-1916 or ASQ H1331. Additionally, all materials must be packaged in accordance with FED-STD-313, ASTM D3951, and MIL-STD-129. The place of performance for this contract is located in San Diego, California.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Electrical Components for Distribution BoxThis subcontract involves the supply of internal electrical components and specialized hardware for distribution boxes to support prime contractors under the DLA Weapons Support Maritime Supply Chain. The provider must ensure all components meet the technical specifications of the DLA Master List for NSN 6110-01-645-8391 and deliver certified materials. Compliance requirements include ensuring all supplied materials are mercury-free and providing the necessary Safety Data Sheets in accordance with FAR 23.304. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 335999 for the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department of Transportation → Maritime Administration

Same awarding agency

Root Cause Analysis (RCA), Service Life Evaluation Program (SLEP), and Class-Related Technical & Engineering Support ServicesThe Maritime Administration requires comprehensive technical, engineering, and program support services to enhance vessel reliability, extend service life, and ensure regulatory and classification compliance. The contractor will be responsible for performing Root Cause Analyses of vessel failures, conducting Service Life Evaluation Program engineering assessments, and providing a wide range of class-related services including design reviews, certifications, and structural, mechanical, and electrical condition assessments. These efforts include utilizing finite element and fatigue analyses, non-destructive testing, and developing corrective actions to reduce repair costs and mitigate lifecycle risks. In addition to technical engineering, the contract encompasses program and project management support to oversee planning, quality assurance, risk mitigation, and budget tracking. The scope also includes training, knowledge transfer, and condition-based asset management to support the Technical Authority program. The primary objective of this initiative is to identify and correct the causes of vessel failures and extend the safe operational life of the MARAD fleet through specialized technical support and rigorous project coordination.

Engineering Services

POSTED

about 1 month ago

DEADLINE

USMMA Ohara Shower & Locker Room RenovationThe Maritime Administration is seeking a contractor to provide all labor, materials, equipment, and supervision required to renovate and reconfigure the men's and women's shower and locker room wet areas at the U.S. Merchant Marine Academy in Kings Point. The scope of work involves the demolition of existing shower assemblies, partitions, and plumbing fixtures, followed by the construction of new shower areas, relocated entrances, and the installation of updated drainage, waterproofing, and slip-resistant finishes. This project is designated as a total small business set-aside under NAICS code 238220. Because the facility is listed on the National Register of Historic Places, all renovation activities must strictly adhere to the Secretary of the Interior’s Standards for Rehabilitation and other applicable historic preservation requirements.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 2 months ago

DEADLINE

Legislative, Regulatory, and Technical Writing Support ServicesThe Maritime Administration within the Department of Transportation is seeking a contractor to provide specialized technical writing, editing, and legislative and regulatory support services for the Office of Chief Counsel, Division of Legislation and Regulations. The selected provider will be responsible for drafting and reviewing rulemaking materials, agency guidance, reports, briefing documents, and congressional correspondence. Key duties include analyzing legislative information, coordinating with subject matter experts, and ensuring all official documents adhere to Federal, DOT, and MARAD formatting and publication standards. This opportunity is listed as a forecast and is designated as an 8(a) set-aside under NAICS code 561410. The work is to be performed in Washington, and the primary points of contact for this requirement are Gabriel Chavez and Tsedey Aragie.

Document Preparation Services

POSTED

about 2 months ago

DEADLINE

MARAD Deepwater Port Support ServicesThe Maritime Administration Office of Deepwater Ports is seeking a multidisciplinary contractor or joint venture to provide comprehensive lifecycle program support for federal maritime and energy infrastructure licensing. The scope of work spans three operational phases, including program administration setup, application review and environmental compliance, and post-licensing administration through decommissioning. Responsibilities are split between direct program support, providing technical and regulatory expertise to MARAD personnel, and third-party coordination, which involves reviewing applicant-submitted environmental documentation such as Environmental Impact Statements and Biological Assessments. This opportunity is a total small business set-aside under NAICS code 541620. A critical restriction prevents the winning contractor from serving as the applicant-funded third-party environmental consulting firm to avoid conflicts of interest. While the contractor provides oversight, technical review, and interagency coordination, MARAD retains all authority over inherently governmental functions and final licensing decisions. Ideal candidates possess extensive experience in federal regulatory compliance, NEPA environmental oversight, and stakeholder management for large-scale federal projects.

Environmental Consulting Services

POSTED

DEADLINE

Vessel Acquisition Manager 2.0The Vessel Acquisition Manager 2.0 contract requires the contractor to provide end-to-end support for the Maritime Administration's Ready Reserve Force recapitalization program. This comprehensive scope includes conducting global market surveys to identify suitable commercial vessels, performing business case analyses and life cycle cost estimates, and executing vessel acquisitions. The contractor is also responsible for managing vessel reflagging, reclassification, and the integration of national defense features and other necessary modifications to ensure all vessels meet specific military operational requirements. Beyond the initial acquisition phase, the contractor must provide ongoing operations, maintenance, and sustainment support to maintain mission readiness for U.S. strategic sealift requirements. The primary objective is to deliver mission-capable vessels while optimizing cost, schedule, and lifecycle performance. This forecast procurement is managed by the Department of Transportation's Maritime Administration, with the place of performance centered in Norfolk.

Ship Building and Repairing

POSTED

DEADLINE

USMMA - Construction Management Services The United States Merchant Marine Academy is seeking Construction Management services to provide subject matter experts for the Samuels Hall Renovation Project in Kings Point, New York. The selected contractor will be responsible for monitoring the general contractor's performance, schedule, and costs while coordinating with the Architect of Record. Due to the campus's status as a registered historic site, all renovation activities must strictly adhere to federal historic preservation standards. This requirement is structured as a short-term bridge contract issued as a single-source action via GSA OASIS+, serving as a precursor to a competitive follow-on task order expected in Spring 2026. The project is currently in progress, with substantial completion targeted for November 2026 and final closeout scheduled for March 2027. The Maritime Administration under the Department of Transportation is the overseeing agency for this effort.

Commercial and Institutional Building Construction

POSTED

DEADLINE

USMMA - Women's Locker Room RenovationThe USMMA Women's Locker Room Renovation project, managed by the Maritime Administration under the Department of Transportation, involves a comprehensive overhaul of the existing facility in Kings Point. The scope of work requires a qualified contractor to provide all necessary labor, materials, and equipment to execute extensive renovations, including the replacement of rubber flooring and mosaic tile, the installation of new moisture-resistant PVC ceiling panels, and the reconfiguration of locker and bathroom layouts using heavy-duty HDPE dividers. Additional upgrades include the installation of new LED lighting, shower fixtures, floor drains, and mirrors, alongside critical infrastructure improvements such as repairing electrical wiring, insulating piping, installing an HVAC ventilation timer, and patching masonry. This project is designated as a Total Small Business Set-Aside under FAR 19.5, specifically targeting small businesses through the SBA. The entire renovation must be completed within a strict forty-five calendar day performance period. Interested parties should note the project falls under NAICS code 236220 and is currently listed as a forecast. Key points of contact for the acquisition include Charles McInnis and Small Business Specialist Tsedey Aragie.

Commercial and Institutional Building Construction

POSTED

DEADLINE

USMMA Catholic PriestThe Maritime Administration, under the Department of Transportation, is seeking a part-time civilian Roman Catholic Priest to support the Command Religious Program at the U.S. Merchant Marine Academy in Kings Point. This requirement is authorized by U.S. Navy Regulation SECNAVINST 1730.7E to fill a critical gap caused by the absence of an assigned military chaplain. Classified under NAICS code 813110, this opportunity is currently listed as a forecast. Interested parties may coordinate with the point of contact, Geoff Boger, or the Small Business Specialist, Tsedey Aragie, for further information regarding this procurement.

Religious Organizations

POSTED

DEADLINE

USMMA Food ServicesThe Maritime Administration is seeking a contractor to provide comprehensive food services for authorized patrons at the USMMA campus in Kings Point. The scope of work includes managing multiple dining halls and fulfilling campus-wide catering requests. This requirement is currently listed as a forecast under NAICS code 722310. To be eligible for the contract, the provider or their representative must comply with the Randolph-Sheppard Act. Additionally, the contractor must demonstrate a minimum of 10 years of certified or equivalent culinary experience to ensure high-quality service delivery.

Food Service Contractors

POSTED

DEADLINE

USMMA Stadium LED ScoreboardThe United States Merchant Marine Academy, under the Maritime Administration of the Department of Transportation, is seeking a qualified commercial contractor for the Tombs Field scoreboard and press box equipment upgrade project in Kings Point. This turn-key modernization effort requires the contractor to provide all necessary labor, supervision, and materials to remove legacy components and install a new digital LED scoreboard system and updated pressbox equipment. This opportunity is designated as a total small business set-aside under NAICS code 339950. The project is currently listed as a forecast, with coordination managed by the agency's point of contact and small business specialist to ensure the comprehensive upgrade of the athletic facilities.

Sign Manufacturing

POSTED

DEADLINE

USMMA TextbooksThe U.S. Merchant Marine Academy at Kings Point, NY, is seeking a contractor to provide comprehensive textbook and course material support for its Midshipmen. The selected contractor will be responsible for the procurement, management, delivery, and distribution of a wide range of instructional resources, including new and used textbooks, nautical charts, software, e-books, and electronic access rights. All materials must be selected by the government and delivered in the correct edition and condition prior to the start of each academic term to ensure the uninterrupted support of undergraduate programs in marine transportation, engineering, logistics, and leadership. This requirement is managed by the Maritime Administration under the Department of Transportation and is classified under NAICS code 424920. The performance of the contract will take place at the academy in Kings Point. Interested parties can coordinate with designated points of contact, including Michael Notebaert for general inquiries and Tsedey Aragie for small business matters, to obtain further information regarding this forecast.

Book, Periodical, and Newspaper Merchant Wholesalers

POSTED

DEADLINE

Independent Financial Advisors Vendor Pool

Solicitation # 693JF726Q000009

The U.S. Maritime Administration's Office of Marine Financing is establishing a pre-qualified pool of Independent Financial Advisors (IFAs) to provide third-party financial and economic analyses for the Federal Ship Financing Program (Title XI) under 46 U.S.C. Chapter 537. The primary objective is to evaluate the economic soundness, creditworthiness, and financial viability of projects proposed for government-guaranteed loans. The IFA pool is intended for an initial five-year period, with the government awarding contracts on a best-value basis, prioritizing non-price evaluation factors such as past performance and the qualifications of key personnel. Key personnel are generally expected to hold a master's degree and possess 5 to 20 years of experience with Federal Government Lending Programs. The solicitation identifies two award types: At Cost and No Cost. For No Cost awards, the government has no payment obligation, and the IFA is invoiced directly by the project applicant. To enter the pool, interested parties must submit an initial proposal detailing their approach, experience, and key personnel resumes, though this initial submission must not include pricing. Once in the pool, IFAs will compete for specific work by submitting technical and price quotations. Strict guidelines are in place regarding organizational conflicts of interest, with prohibitions on using non-public information for private purposes or competing for related MARAD work for six months following contract completion. All deliverables and working papers produced under these contracts remain the property of the U.S. Government.

Portfolio Management and Investment Advice

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

LIPTM00129, USMC Communication Systems, Cables, Corp Production

POSTED

about 2 months ago

DEADLINE

LSUBP00025, ExW System Production and Kitting Contract (C)

POSTED

DEADLINE

LIPTM00347, NOTM-ULTV Production and Integration

POSTED

DEADLINE

LIPTM00214-C4I FMS IPT JA-P-NFX, SAC N6523618D8014 Corporate Production

POSTED

DEADLINE

To Procure 15 each of COTS RSOIS Replacement for the Upper Air Program.

POSTED

DEADLINE

FY26 TPS for NEXRAD Sites

POSTED

DEADLINE

To Procure 20 Each HOGEN and all ancillaries for the Upper Air Program.

POSTED

DEADLINE

To Procure 15 each COTS RSOIS Replacement for the Upper Air Program.

POSTED

DEADLINE

Lightning Surge Protector (L-COM P/N ALW-D2-05).

POSTED

DEADLINE

To Procure 5 Each HOGENs and all ancillaries for the CHUAS network for the Upper Air Program.

POSTED

DEADLINE

To Procure PTB330TS build to print cables, 120 each, for the Upper Air Program.

POSTED

DEADLINE

To Procure 37 each barometers for the Upper Air Program.

POSTED

DEADLINE

Prepare for this forecast

Research this forecast and prepare for the solicitation

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS