Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on September 25, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Vacuum Relief Furnace

Closed
FA9101VRFFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333994
New
Federal
Industrial Walk-In Oven
Solicitation # FA480027Q0009
The 633d Contracting Squadron at Joint Base Langley-Eustis is conducting market research to identify qualified businesses capable of providing one commercial, electric industrial walk-in oven for high-temperature drying and curing processes. This effort is a sources-sought activity and is designated as a Small Business Set Aside. The required oven must feature a minimum effective work area of 7 feet wide by 7 feet high by 10 feet long, with a maximum operating temperature of at least 500 degrees Fahrenheit and support for low-temperature curing starting at 60 degrees Fahrenheit. Technical specifications include programmable temperature profiles with ramp-and-hold capability, NEMA 12 or NEMA 4 enclosures for electrical components, and strict compliance with National Fire Protection Association Standard 86. The oven must be fully assembled, wired, and factory tested prior to shipment, with a minimum one-year manufacturer warranty and comprehensive operating and maintenance documentation. Safety requirements include proof-of-closure limit switches on access doors and audible and visual high-temperature alarm circuits. Interested parties must submit electronic responses to the Request for Information by November 20, 2026, with all questions due by November 18, 2026. Responses should be emailed to SrA Wesley Kuhlmann and include feedback on the Statement of Requirement and whether a delivery timeline of twelve to fourteen weeks after receipt of order is sufficient.
FA4800 633 Cons Pkp

POSTED

4 days ago

DEADLINE

in 3 days
NAICS: 333994
New
Federal
Custom R&D Industrial Furnace
Solicitation # 7-S176-Q-00012-00
Argonne National Laboratory (ANL) is soliciting firm fixed price proposals for the design, fabrication, delivery, installation, and commissioning of a custom industrial R&D box furnace. The system will be used to test fuel-flexible burner technologies utilizing natural gas and hydrogen blends ranging from 0 to 100 percent hydrogen. The project includes the delivery of a complete furnace system with an adaptable burner bung, refractory insulation, and optical ports, as well as comprehensive design and commissioning documentation. Performance will be verified through a two-hour commissioning test at a firing rate not exceeding 5 MMBtu/hr, with a strict requirement that the exterior shell temperature remains below 176 degrees Fahrenheit. The contract will be awarded on a best-value tradeoff basis, prioritizing the technical proposal over price and business management. Technical evaluations will focus on the offeror's technical approach, environment safety and health compliance, quality assurance programs, and past performance in similar R&D or industrial environments. Proposals must be submitted in three separate volumes—Technical, Business/Management, and Price—by December 1, 2026. The anticipated period of performance is approximately six months, with a target completion date of June 2027. Work involves off-site fabrication and on-site installation at the Lemont, Illinois facility. Due to the high-risk nature of the on-site work, contractors must adhere to strict safety protocols, provide specific insurance certifications naming UChicago Argonne, LLC and the US Government as additional insureds, and comply with Buy American requirements, which mandate 65 percent domestic content for items delivered through 2028.
Argonne National Labor - DOE Contractor

POSTED

5 days ago

DEADLINE

in 15 days

AI Contract Overview

Show more

The Department of Defense, through the Air Force Test Center's Installation Contracting Division at Arnold Air Force Base, has issued a Sources Sought Notice to identify the technical capabilities and availability of small and large businesses to provide a brand-new Horizontal Front-Loading, Internal Gas Quench Vacuum Relief Furnace. This notice is for informational purposes only and does not constitute a formal solicitation or request for quote. The required equipment must be brand-new and adhere to strict performance metrics, including temperatures up to 2400 degrees Fahrenheit, and must comply with SAE Aerospace Material Specification AMS 2750G and NFPA standards 70, 79, and 86D. Additional requirements include a PLC control system, closed-loop water cooling, a manual load truck, and the provision of digital technical documentation and no-cost operator and maintenance training prior to final commissioning. Interested respondents under NAICS code 333994 must submit their company information, Unique Entity Identifier, a description of their technical solution, a budgetary estimate inclusive of delivery to Arnold AFB, and a projected delivery timeline. Responses are due by 1:00 PM CST on October 2, 2026, and should be submitted via email to the primary points of contact, Maddux Golden and Erica Anglin. Because this is a market research effort, the government is under no obligation to award a contract based on these responses, and no funds are available to compensate for the preparation of submissions.

General Info

DoD seeks sources for a brand-new vacuum relief furnace for Arnold Air Force Base.

NAICS

333994 - Industrial Process Furnace and Oven Manufacturing

Place of Performance

TN, USA

Set-Aside

NONE

Documents

2
PDF, High priority: read this firstspecifications
High
PDF, Low prioritysources-sought
Low

Read all 2 documents

Every page of every file, in your free workspace.

Read the documents

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • OVEN, BAKING AND ROASTIOpen now, due in 2 days
  • Industrial Walk-In Oven ManufacturerOpen now, due in 4 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA9101 Aedc Pkp Procrmnt Branch
Contacts2 people available
OfficeARNOLD AFB, TN, 37389-1332, USA

Full Description

Show more

THIS SOURCES SOUGHT NOTICE IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR QUOTE. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS ANNOUNCEMENT IS STRICTLY VOLUNTARY.



This is a Sources Sought Notice to determine the availability and technical capability of small and large businesses to meet the Government’s requirement for commercial equipment IAW Attachment 1 – Technical Specifications Sheet.

More opportunities from Department Of Defense → FA9101 Aedc Pkp Procrmnt Branch

Same awarding agency

NAICS: 334220
New
Federal
Notice of Intent to Sole Source L3Harris C-146 Series GPS Antennas
Solicitation # FA910127QB010
The Department of the Air Force is seeking a sole-source, firm-fixed-price contract for the procurement of five C146-22-1 Dual Frequency GPS Antennas to support the C-12J Test GPS Capability. The government intends to award this contract to L3Harris Technologies, Inc., provided the offeror meets all technical, physical, and performance specifications. Key hardware requirements include a maximum weight of 227 grams, maximum dimensions of 5 inches in diameter by 1.5 inches in height, and an antenna gain of -4 dBIC at 5 degrees above elevation. All deliverables, including the antennas and a specifications data sheet, must be delivered to Holloman AFB, New Mexico, no later than December 31, 2026, and within 30 days after receipt of order. This solicitation is for commercially available off-the-shelf products, meaning CMMC requirements are not applicable and the contractor will not require access to government facilities or information systems. The award is based on technical validation and overall best value. Administrative requirements include active SAM.gov registration and the use of Wide Area WorkFlow for electronic invoicing. Quotes must be submitted in two sections, covering administrative/price and technical capability, and must be valid for at least 60 days. The procurement is unrestricted and follows the Revolutionary FAR Overhaul format, incorporating various standard FAR and DFARS clauses regarding labor, environmental standards, and security prohibitions.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 3 days
View Details
NAICS: 541330
New
Federal
Request for Whitepapers: AEDC Velocity Alliance - A Multi-Billion Dollar OTA Consortium Opportunity
Solicitation # FA9101-26-9-Velocity_Alliance
The AEDC Velocity Alliance is a strategic consortium established by the Department of the Air Force, through the Air Force Test Center and Arnold Engineering Development Complex, to accelerate the modernization, restoration, and sustainment of critical national test infrastructure. Operating under the authority of 10 U.S.C. 4022 and 10 U.S.C. 2808a, this initiative utilizes Other Transaction Agreements (OTAs) rather than standard FAR-based contracts to create an agile industrial base. The consortium will manage a multi-billion dollar portfolio of complex engineering and construction projects through Fiscal Year 2032, with a near-term pipeline estimated at 550 million dollars for approximately 135 projects. Once established, all project opportunities will be competed exclusively among pre-qualified Alliance members. The scope of work encompasses a wide range of infrastructure projects, including general and industrial construction, high-pressure and hazardous process systems, electrical systems, fire suppression, and specialized engineering services. To gain membership, vendors must undergo a multi-phase onboarding process involving the submission of a technical whitepaper, government evaluation, and a mandatory site visit. Key requirements for entry include proof of CMMC Level 2 certification or a NIST SP 800-171 assessment in SPRS, and the demonstration of partnership capabilities with non-traditional defense contractors, small businesses, or nonprofit research institutions. Project awards within the consortium are generally expected to be based on Best Value, evaluating technical approach, schedule, risk, and price.
Engineering Services

POSTED

1 day ago

DEADLINE

in almost 4 years
View Details
NAICS: 332996
New
Federal
Large Diameter Flex Duct Bellows
Solicitation # FA9101LDFDB
The Department of Defense, through the Arnold Engineering Development Complex at Arnold AFB, Tennessee, has issued a Sources Sought Notice to identify capable businesses for the procurement of two new, fully functional Large Diameter Flex Duct Bellows Assemblies. These assemblies must feature a 45.315-inch internal diameter and be fabricated from silicone-coated 1523 fiberglass with a 6-ply body and a nominal thickness of 0.12 inches. The technical requirements specify a working pressure of 30 psid internal and 15 psid external, with an operational temperature range from -60°F to +450°F. Fabrication must adhere to EJMA Standards, ASME Boiler and Pressure Vessel Code, and Drawing RJ632279.18, with welds inspected per AWS D1.1. Refurbished or remanufactured parts are strictly prohibited. The contractor is responsible for all materials, labor, equipment, and transportation, including the provision of supports, cribbing, tie downs, and weather protection to ensure safe delivery to Arnold AFB. Required deliverables include a comprehensive documentation package consisting of visual, weld, and pressure test inspection reports, axial spring rate calculations, and a standard manufacturer warranty. Assemblies must undergo hydrostatic testing to 45 psig at 70°F. Interested respondents must submit their company information, SAM Unique Entity Identifier, Cage Code, business size, and a tailored capability statement to the designated points of contact by November 19, 2026.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

7 days ago

DEADLINE

in 3 days
View Details
NAICS: 332912
Federal
Tunnel 9 Pitch Upgrade
Solicitation # FA9101T9PU
The Arnold Engineering Development Complex (AEDC) requires the comprehensive modernization of a high-performance hydraulic motion system for Tunnel 9 located in Silver Spring, Maryland. This 100% Small Business Set-Aside is a Firm-Fixed-Price contract encompassing the design, engineering, procurement, off-site fabrication, pre-assembly, on-site demolition, installation, and commissioning of core system components. Key hardware requirements include a primary control valve with a step response time of 55 ms or less, a main actuating cylinder with a 120.5-inch working stroke capable of 13 ft/s linear speed, a Hydraulic Power Unit (HPU), and a dedicated filtration and cooling kidney loop. All components must adhere to ASME B31.1, ASME BPVC VIII, and ISO 4406 standards, with specific requirements for near-vacuum environment reliability and compatibility with DTE-26 Ultra hydraulic oil. The project is structured into three distinct phases: Engineering Design, Part Procurement and Pre-assembly, and Demolition, Installation, and Commissioning. The total period of performance is 46 weeks from the lead time event. Award will be based on a combination of technical capability, past performance on similar hydraulic systems, and price reasonableness. Contractors must meet CMMC Level 1 (Self) cybersecurity requirements and possess the ability to handle Controlled Unclassified Information (CUI). Rigorous quality controls are mandated, including hydrostatic pressure testing, live performance demonstrations witnessed by AEDC, and strict adherence to MIL-STD-130 and MIL-STD-129 for item marking and shipment. Payment will be processed electronically via the Wide Area WorkFlow (WAWF) system.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

11 days ago

DEADLINE

in 24 days
View Details
NAICS: 334418
Federal
ENETX-MA4
Solicitation # FA910127QB002
Solicitation FA910127QB002 is a combined, firm-fixed-price procurement for the Department of the Air Force, specifically supporting the 704th Test Group and 746th Test Squadron at Holloman Air Force Base, New Mexico. The primary objective is the acquisition of manufactured commercial hardware to support the integration, maintenance, and troubleshooting of the Ultra High Accuracy Reference System and customer Units Under Test. The required deliverables include two ENETX-MA4-2F4 Converter Appliances, two ENETXCAB-MA4-J1-01 interface cable assemblies for power and MIL-STD-1553, and two ENETXCAB-MA4-J2-02 interface cable assemblies for ARINC-429. All equipment must be RoHS compliant and adhere to the Alta dt Hardware Manual. This procurement is a 100% Small Business Set-Aside for brand-name items, specifically requiring genuine OEM Alta dt parts; offers of alternate brands will be deemed technically unacceptable. Award will be granted to a responsible source that is technically acceptable and provides a fair and reasonable price, with a 10 percent price evaluation preference applied to HUBZone small business concerns. Delivery is required within 10 weeks from the date of award receipt, with shipping terms set as FOB Destination. The contract incorporates various FAR and DFARS clauses, including those regarding the Buy American program, safeguarding covered defense information, and prohibitions on certain procurements from the Xinjiang Uyghur Autonomous Region and the Maduro regime. Quotes must be submitted electronically by November 20, 2026, and must include a total firm-fixed-price quote and confirmation of active SAM.gov registration.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

14 days ago

DEADLINE

in 4 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS