Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, June 24 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

This Solicitation opportunity from Government of Canada was posted on January 24, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Valved Molecular Beam Epitaxy Effusion Cells for Gallium and Indium

Closed
25-58268Canada

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333242
New
Federal
Supply of 24" Up-Cut SawThe contract involves the supply of a commercially available 24-inch up-cut saw, specifically part number 3220-N30001071, which must meet the performance specifications outlined in the solicitation. The delivery terms require the equipment to be shipped FOB Destination and accompanied by complete manufacturer documentation. This subcontract is designated as a Total Small Business Set-Aside under FAR 19.5, targeting small enterprises in accordance with procurement regulations. The solicitation was posted on June 10, 2026, with a response deadline set for June 15, 2026, at 2:00 PM. It falls under the NAICS code 333242, which pertains to machinery manufacturing. The contracting agency is the Defense Logistics Agency Distribution within the Department of Defense, emphasizing the government's need for reliable industrial equipment to support its operations. Other logistical details such as the place of performance and contact information were not specified.
DLA Distribution

POSTED

1 day ago

DEADLINE

in 4 days
NAICS: 333242
New
Federal
Industrial Tool Supply – Grinder (NSN 5120011908571)The contract entails the supply of one commercial off-the-shelf industrial grinder, specifically a Fairbanks Morse model with part number P12612379 and National Stock Number 5120011908571. The grinder must meet all relevant federal, military, and hazardous materials standards, ensuring compliance with stringent regulatory requirements. This procurement is managed by the General Services Administration's Supply Chain Management Contracting Division under the NAICS code 333242, which corresponds to industrial machinery manufacturing. This subcontract opportunity was posted on June 10, 2026, with responses due by June 17, 2026, indicating a short turnaround for vendor proposals. The contract is part of a supply chain management effort aimed at acquiring standardized industrial tools for government use. Specific location details for performance and points of contact are not provided, reflecting a streamlined procurement focused on product specifications and regulatory compliance.
Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

1 day ago

DEADLINE

in 6 days
NAICS: 333242
New
Federal
Supply of JUKI LU2216N-7 Industrial Sewing MachinesThis contract involves the procurement and delivery of two JUKI LU2216N-7 Single Needle Long Arm Walking Foot Lockstitch Machines, complete with electronic motors, tables, and stands. The machines are to be fully crated to ensure protection against damage during shipping. The contract is designated as a total small business set-aside under the SBA guidelines, reflecting an emphasis on supporting small businesses in fulfilling government needs. The solicitation, issued by DLA Maritime - Portsmouth under the Department of Defense, targets supply within the industrial sewing machine sector (NAICS code 333242). The expected place of performance is Kittery, zip code 03904, and responses to the solicitation were due by June 16, 2026. The subcontract focuses on delivering specialized sewing equipment to meet operational requirements with an assurance of quality and careful handling throughout the procurement and shipping process.
DLA Maritime - Portsmouth

POSTED

1 day ago

DEADLINE

in 5 days
NAICS: 333242
New
SLED
Supply of Custom-Built Dustless Sandblasting TrailerThe contract involves the manufacture and delivery of a custom-built, portable dustless sandblasting trailer designed to meet specific operational requirements. Key components of the trailer include a 5 cubic foot blast pot, a powerful 185 CFM compressor, a water tank with a capacity exceeding 150 gallons, a 48 GPM pump, and an ADCS-350 air dryer/cooler system. The trailer itself will be DOT-compliant to ensure safe transport and usability on public roads. Issued by the Department of Transportation in Hawaii, this subcontract opportunity was posted on June 9, 2026, with responses due by June 16, 2026. The work falls under the NAICS code 333242, relating to industrial machinery manufacturing. While specific location details for performance and points of contact were not provided, the solicitation is publicly accessible for potential bidders through the Hawaii public procurement system.
Department of Transportation

POSTED

2 days ago

DEADLINE

in 4 days
NAICS: 333242
New
Federal
Intaglio Plate Grinder Supply and InstallationThe contract involves the supply, delivery, installation, and commissioning of high-precision intaglio plate grinders designed to handle plates with thicknesses ranging from 900 to 1100 microns. These grinders must undergo thorough testing including a Factory Inspection Test (FIT) and Bureau Acceptance Testing (BAT) to ensure compliance with required standards. The procurement is managed by the Department of the Treasury and is planned to be executed in Washington, ZIP code 20228. This subcontract opportunity was posted on June 9, 2026, with a response deadline set for July 10, 2026, at 8:00 PM. The work falls under the NAICS code 333242, which typically covers industrial machinery manufacturing. The contract is centered on providing advanced machinery necessary for precision equipment use, with a focus on quality assurance through detailed testing phases prior to final acceptance and operational deployment.
Department Of The Treasury

POSTED

3 days ago

DEADLINE

in 29 days

AI Contract Overview

Show more

The National Research Council Canada (NRC) is seeking to procure two new valved effusion cells designed for use with their V90 Molecular Beam Epitaxy (MBE) system. These effusion cells are intended to control the flux of atomic gallium or indium, which are critical materials in the growth of semiconductor epitaxial structures. The acquisition aims to enhance the precision and functionality of the NRC's semiconductor fabrication capabilities. This solicitation, titled "Valved Molecular Beam Epitaxy Effusion Cells for Gallium and Indium," was posted on January 24, 2026, with a response deadline set for February 9, 2026. The work will be performed in the National Capital Region in Ottawa. The contract is managed by the Government of Canada's National Research Council, with Marie Josée Lachance serving as the primary contracting authority. Prospective suppliers can find further details and submit their responses through the official Canada Buys platform.

General Info

NRC seeks two valved effusion cells for gallium and indium in V90 MBE system.

Agency

Government of Canada → National Research Council of Canada

NAICS

333242 - Semiconductor Machinery Manufacturing View NAICS

Place of Performance

National Capital Region (NCR), Ottawa, CAN

Set-Aside

NONE

Documents

(2)

25-58268_PAC_e-Science.pdf

PDF

ACAN 25-58268 Valved Molecular Beam Epitaxy Effusion Cells

PDF•5 pages•acan

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → National Research Council of Canada
Contacts1 person available
OfficeN/A
Organization / Agency
Government of Canada → National Research Council of Canada
Office AddressN/A
Contacts
Marie Josée LachanceContracting Authority
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
The National Research Council Canada (NRC) has a requirement to purchase two (2) new effusion cells for the National Research Council Canada (NRC) V90 Molecular Beam Epitaxy (MBE) system. These effusion cells will provide valved control of either atomic gallium or indium flux for the growth of semiconductor epitaxial structures.