Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 8 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

VEHICLE LEVELING SPACERS AND SKID PLATES

Active
FLT0015-26Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Department of Justice, through Federal Prison Industries (UNICOR), is seeking market information on vehicle leveling spacers and skid plates for use on law enforcement vehicles at facilities in Bastrop and Anthony, Texas, and Victorville, California. This Request for Information does not constitute a solicitation or commitment to procure, and participants assume all costs associated with responding. The focus is on specific aftermarket kits for 2026 model Ford Expedition, Ford F-150, Chevrolet Tahoe, and Chevrolet Silverado 1500 vehicles, with exact material and hardware specifications required for each kit, including 6061 aluminum leveling spacers, A-36 steel reinforcement and skid plates with zinc plating or powder coating, and Grade 10.9 locking nuts and washers. Installation instructions and complete hardware packages are mandatory for all submitted solutions. All responses must be submitted by July 6, 2026, at 11:00 AM EST via email to Daniel McCauley and Aaron Mitchell. Contractors must provide company details, contact information, business size classification, and any additional relevant information. The NAICS code for this effort is 3361, and while no set-aside designation is specified, responses are sought to inform potential future procurement actions. The U.S. Government will not pay for any information submitted, and future solicitations, if issued, will be posted exclusively on SAM.gov. Compatibility with exact vehicle models and configurations is critical, and all components must adhere strictly to the listed technical requirements without deviation.

General Info

U.S. DOJ seeks specs for 2026 Ford/Chevy leveling spacers and skid plates via July 6, 2026, email submission.

Agency

Department Of Justice → Inc Federal Prison IndustriesView Agency

NAICS

3361 - Motor Vehicle ManufacturingView NAICS

Place of Performance

Bastrop, TX, USA

Set-Aside

NONE

Documents

(1)

RFI Vehicle Leveling Spacers and Skid Plates June 23, 2026

PDF•rfi

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Justice → Inc Federal Prison Industries
Contacts2 people available
OfficeWASHINGTON, DC, 20534, USA
Organization / Agency
Department Of Justice → Inc Federal Prison Industries
View Agency Profile
Office AddressWASHINGTON, DC, 20534, USA
Contacts
Aaron Mitchell
contact@example.gov
Daniel McCauley
contact@example.gov

Full Description

Show more

REQUEST FOR INFORMATION/MARKET SURVEY


                                                                                              June 23, 2026



RFI DISCLAIMER


This Request for Information (RFI) does not create any representation, either express or implied, that if a procurement process does proceed, that the participant’s will be given any preference or special consideration.



Participants are still required to follow any procurement process that may take place in the future. If a solicitation is released, it will be advertised in under “Contracting Opportunities” in SAM.gov. It is the responsibility of potential offerors/bidders to monitor these sites for the release of any solicitation.



This RFI does not indicate a commitment to any particular course of action. Responders are advised that the U.S. Government will not pay for any information or administrative costs incurred in response to this RFI; all costs associated with responding to this RFI will be solely at the interested party’s expense



Subject: VEHICLE LEVELING SPACERS AND SKID PLATES



PSC: 2510


NAICS: 336330 or 3361





Please provide the following information regarding the services listed below:



Please provide the following information regarding the services listed below:



  1. Services Required: Secure packages for law enforcement automobiles (partitions, window screens, kick panels, spit shield, etc.)
  2. Location:
    1. Federal Prison Industries, Bastrop, TX 78602-Bastrop Vehicular
    2. Federal Prison Industries, Anthony, TX 79821-La Tuna Vehicular
    3. Federal Prison Industries, Victorville, CA 92394-Victorville Uplift

       


**Sample list of Vehicle Kits being sought. This is not exclusive.**



  1. KIT0300-23  FRONT-LEVELING-KIT-FD-EXPED-26


SPECIFICATIONS:


THIS IS A FRONT LEVELING KIT FOR YEAR MODEL (2026) FORD EXPEDITION.


THE KIT IS DESIGNED TO ADJUST THE RIDE HEIGHT TO BE MORE LEVEL COMPARED


TO THE REAR.


THE FRONT SPACERS MUST BOLT ON TO THE FACTORY STRUT ASSEMBLY UTILIZING


THE EXISTING


FACTORY HARDWARE AS WELL AS THE HARDWARE PROVIDED


IN THE KIT. THE FACTORY COMPONENTS REQUIRED. LEVELING KIT


IS VEHICLE AND YEAR MODEL SPECIFIC AND IT IS RECOMMENDED TO VERIFY KIT


COMPATIBILITY AND COMPONENT LIST PRIOR TO PROCUREMENT.



LEVELING KIT CONSITS OF THE FOLLOWING LISTED BELOW:


(QTY)


(2) # (BF-F150LSP-2023)


DESCRIPTION:


# 6061 ALUMINUM


# 0.6875"" THICK LEVELING SPACER


# (3) 10MM x 1.25 STUDS



(2) # (BF-F150LSP-2023-W)


  DESCRIPTION:


# 0.125"" A-36 STEEL PLATE


# ZINC PLATED


# REINFORCEMENT PLATE


(6) # 10mm x 1.25 TOP LOCKING NUT (GRADE 10.9)


(6) # 10mm x 1.5 TOP LOCKING FLANGE NUT (GRADE 10.9)


(6) # 10MM x 30mm WASHER (GRADE 8.9)



**BAJA COMPLETE KIT PART# (BF-F150LSP-2023) OR EQUIVALENT***


**MUST INCLUDE INSTALLATION INSTRUCTIONS***


**ALL MOUNTING HARDWARE PROVIDED***


**ALL SPECIFICATIONS LISTED ABOVE ARE MANDATORY!***




  1. KIT0692-26  FRONT-LEVELING-SPACER-KIT-FD-F150-26


MATERIAL DESCRIPTION:


THIS IS A FRONT LEVELING KIT FOR THE YEAR MODEL (2026)


FORD F150 4WD PICKUP TRUCK. IT WILL FIT ALL CAB AND BED CONFIGURATIONS.


THIS KIT IS DESIGNED TO ADJUST THE RIDE HEIGHT TO BE MORE LEVEL COMPARED


TO THE REAR. THE FRONT SPACERS MUST BOLT ON TO THE FACTORY STRUT


ASSEMBLY UTILIZING THE EXISTING FACTORY HARDWARE AS WELL AS THE HARDWARE


PROVIDED IN THE KIT. FACTORY COMPONENTS REQUIRED. THIS KIT IS VEHICLE


AND YEAR MODEL SPECIFIC AND IT IS RECOMMENDED TO VERIFY KIT


COMPATIBILITY AND COMPONENT LIST PRIOR TO PROCUREMENT.



LEVELING KIT CONSITS OF THE FOLLOWING LISTED BELOW:



DESCRIPTION:


# 6061 ALUMINUM


# 0.6875" THICK LEVELING SPACER


# (3) 10MM x 1.25 STUDS



  DESCRIPTION:


# 0.125" A-36 STEEL PLATE


# ZINC PLATED


# REINFORCEMENT PLATE


(6) # 10mm x 1.25 TOP LOCKING NUT (GRADE 10.9)


(6) # 10mm x 1.5 TOP LOCKING FLANGE NUT (GRADE 10.9)


(6) # 10MM x 30mm WASHER (GRADE 8.9)



**MUST INCLUDE INSTALLATION INSTRUCTIONS**


**ALL MOUNTING HARDWARE PROVIDED**


**ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!






  1. PLT0631-26 SKID-PLATE-KIT-FD-F150-CC-4X4-26


THIS SKID PLATE KIT WILL FIT THE YEAR MODEL (2026) FORD F150 4X4 & 2WD


ECO-BOOST, NON-ECOBOOST, V8, V6 & ALL CAB AND BED CONFIGURATIONS.




THIS MATERIAL IS CURRENT YEAR, MAKE, AND MODEL SPECIFIC AND MUST BE TEST


FITTED BEFORE BULK ORDERING TO ENSURE VEHICLE COMPATIBILITY.



SKID PLATE KIT CONSIST OF THE PARTS LISTED BELOW:


Crossmember Plate#1


Description:


# 0.125" A-36 Steel Plate


# Powder Coated Black


Hardware Kit


(2) 10mm x 1.5 x 35mm Bolt (Grade 10.9)


(2) 3/8" USS Washer


(2) (BF-NOS-05M) Description:


# 10mm x 1.5 Nut on a stick 90°



Crossmember Plate#2


Description:


# 0.1875" A-36 Steel Plate


# Powder Coated Black


Hardware Kit


(2) 10mm x 1.5 x 35mm bolt (Grade 10.9)


(2) 3/8" USS Washer



Crossmember Plate#3


Description:


# 0.1875" A-36 Steel Plate


# Powder Coated Black


Hardware Kit


(2) 10mm x 1.5 x 35mm Button Head Bolt(Grade 10.9)


(2) 3/8" USS Washer



Crossmember Plate#4


Description:


# 0.1875" A-36 Steel Plate


# Powder Coated Black


Hardware Kit


(2) 8mm x 1.25 x 30mm Bolt (Grade 10.9)


(2) 5/16" USS Washer


(1) 3/8" 1-1/4 NC Bolt


(1) (BF-NOS-012) Description:


# 3/8 # 16 Nut on a Stick 12" Long 90° at Tip



Front Skid Plate


Description:


# 0.1875" A-36 Steel Plate


# Powder Coated Black


# Break Away Technology


Hardware Kit


(4) 1/2" x 1-1/4" NC Bolt


(2) 1/2" SAE Washer


(2) 1/2" Custom Tapered Washer




Front Axel Skid Plate


Description:


# 0.1875" A-36 Steel Plate


# Powder Coated Black


# Break Away Technology


Hardware Kit


(4) 1/2" x 1-1/4" NC Bolt


(4) 1/2" Custom Tapered Washer



Transmission Skid Plate


Description:


# 0.1875" A-36 Steel Plate


# Powder Coated Black


Hardware Kit


(2) 12mm x 1.75 Flanged Top Lock Nut


(2) 7/16" x 3" NC Bolt


(2) 7/16" NC Top Lock Nut


(4) 7/16" USS Washer


(2) 10mm x 1.5 x 35mm Bolt (Grade 10.9)


(2) 3/8" USS Washer


(2) (BF-DB-05) Description:


# 0.1875" A-36 Steel Plate


# Drop Bracket



Transfer Case Skid Plate


Description:


# 0.1875" A-36 Steel Plate


# Powder Coated Black


Hardware Kit


(2) 1/2" x 1-1/4" NC Bolt


(2) 1/2" Custom Tapered Washer


(2) 8mm x 1.25 x 30mm Bolt (Grade 10.9)


(2) 5/16" USS Washer




**Must Include Installation Instructions**


**All Mounting Hardware Provided**




  1. KIT0897-23 FRONT-LEVELING-SPACERS-KIT-CH-SUV/TRK-26


SPECIFICATIONS:


FRONT LEVELING KIT FOR YEAR MODEL (2026) CHEVY TAHOE 4WD AND CHEVY


SILVERADO 1500 4WD PICKUP TRUCK. THIS KIT WILL FIT ALL CAB AND BED


CONFIGURATIONS. THE KIT IS DESIGNED TO ADJUST THE RIDE HEIGHT TO BE MORE


LEVEL COMPARED TO THE REAR. THE FRONT SPACERS MUST BOLT ON TO THE


FACTORY STRUT ASSEMBLY UTILIZING THE EXISTING FACTORY HARDWARE AS WELL


AS THE HARDWARE PROVIDED IN THE KIT. THE FACTORY COMPONENTS REQUIRED.


LEVELING KIT IS VEHICLE AND YEAR MODEL SPECIFIC AND IT IS RECOMMENDED TO


VERIFY KIT COMPATIBILITY AND COMPONENT LIST PRIOR TO PROCUREMENT.



ALL SPECIFICATIONS LISTED BELOW ARE MANDATORY!


MATERIAL SPECIFICATIONS:


FULL SURFACE CONTACT RING DELIVERING MATCHING SURFACE


INSTALLED USING ORIGINAL STUDS (UNCUT)



HARDWARE KIT INCLUDES:


(QTY)


(2) - (BF-TALSP-2025)


  DESCRIPTION:


# 6061 ALUMINUM


# 0.5937"""" THICK LEVELING SPACER


(6) – 10mm x 1.5 Nylon Locking Nut (Grade 10.9)


(4) – 10mm x 30mm Washer


(2) – 10mm x 30mm Custom Washer


(2) – 11"" Cable Ties



BAJA COMPLETE KIT PART# (BF-TALSP-2025) OR EQUIVALENT


** MUST INCLUDE INSTALLATION INSTRUCTIONS**


** MUST INCLUDE  ALL MOUNTING HARDWARE**




General:


Federal Prison Industries, (UNICOR) UNICOR is a self-supporting government corporation within the U.S. Department of Justice, and has a two-fold mission:


  1.  To train and provide inmates within the federal prison system with marketable skills upon release, and to productively employ them during incarceration to manage the population.
  2. To produce quality, market-priced goods, and services for sale to both the Federal and commercial markets, while operating in a self-sustaining manner.



    1. of Company

    1. Telephone number, fax number, and e-mail address
    2. Business Size (i.e., Large, Small, Socio-economic category)
    3. Any other information Contractor deems pertinent to this request


    Response Deadline: Monday, July  6, 2026 AT 11:00 AM EST


    For planning and scheduling purposes, to insure being included in our market research for these products, responses must be received no later than 11:00 am (EST) on Monday, April 27, 2026.



    Responses shall be sent via email only to Daniel McCauley at daniel.mccauley2@usdoj.gov and Aaron Mitchell at aaron.mitchell2@usdoj.gov.




    All interested parties shall furnish the following minimum information:













Similar Contracts

NAICS: 3361
New
Federal
Supply of new Van, 17 seater (including driver)The U.S. Embassy in New Delhi is seeking quotations for the supply of a new 17-seater van including the driver under solicitation number 191N6526Q0065-A001, which was posted on June 23, 2026, with a firm deadline for submission set for June 29, 2026, at 8:30 AM. The solicitation has been amended to clarify bidder inquiries but no other terms have been modified, including the original response deadline. Quotations must be submitted exclusively to Newdelhibids@state.gov; any submissions sent to other email addresses will be rejected and handled in accordance with FAR provision 52.215-1. The contract falls under NAICS code 3361, with no set-aside provisions applied, and the performance location is in New Delhi, India, with a zip code of 110021. The primary point of contact is Sudhir P. Kamath, and the secondary contact is Chaitanya Sharma, Procurement Supervisor, both affiliated with the Department of State. The contract is being procured through the Office of the U.S. Embassy in New Delhi, with administrative headquarters located in Washington, D.C.
US Embassy New Delhi

POSTED

6 days ago

DEADLINE

in about 11 hours
View Details
NAICS: 3361
Federal
RIGHT HAND DRIVE LARGE SUVThe contract pertains to the procurement of a right-hand drive large SUV for the U.S. Embassy in Suva, under the solicitation number 19FJ6026Q0006. It is classified as a presolicitation, indicating that the solicitation is not yet open for bids but is scheduled to be posted by June 17, 2026, with a response deadline set for August 3, 2026. The contract falls under NAICS code 3361, which covers motor vehicle manufacturing, and is being managed by the Department of State office located in Washington, D.C. The place of performance is Suva, Central region, reflecting that the SUV will be delivered or utilized in Fiji. The procurement office can be contacted via the provided email and phone number for any inquiries. There is no set-aside type specified for this acquisition, implying it may be open to all qualified bidders. This contract opportunity allows vendors to prepare in advance for submitting proposals once the solicitation is officially posted.
US Embassy Suva

POSTED

12 days ago

DEADLINE

in about 1 month
View Details
NAICS: 3361
Federal
Supply of new Van, 17 seater (including driver)The U.S. Embassy in New Delhi, representing the Department of State, is seeking quotations for the supply of a brand new 17-seater van, including the driver. The procurement will be awarded to the responsible company submitting an acceptable offer at the lowest price, based on initial quotations without discussions, though discussions may be held if necessary with companies in the competitive range. Interested parties must submit any requests for clarifications via email by 1700 India Time on June 22, 2026. Responses to these inquiries will be shared with all interested contractors. Quotations must be submitted electronically in English to Newdelhibids@state.gov by 1400 India Time on June 29, 2026, with the subject line referencing Solicitation No. 191N6526Q0065. Files exceeding 10MB must be divided and sent in separate emails. Submissions sent to any other email address or received after the deadline will be rejected following applicable federal acquisition regulations. The solicitation is open with no set-aside restrictions, and the place of performance is New Delhi. The primary contact for this solicitation is Sudhir P. Kamath, with Chaitanya Sharma as a secondary contact.
US Embassy New Delhi

POSTED

13 days ago

DEADLINE

in about 14 hours
View Details
NAICS: 3361
Federal
SUPPLY AND DELIVERY OF VEHICLE FOR U.S. EMBASSY MADRID, SPAINThe U.S. Embassy in Madrid is seeking to purchase a single passenger SUV to join its official fleet, with delivery required within six months of order placement. The vehicle must meet European specifications and feature a hybrid engine that qualifies for ECO or ZERO emission labels, offering a combined driving range of at least 900 kilometers and a fuel tank capacity of no less than 50 liters. It should accommodate five passengers and ideally have all-wheel drive with an automatic transmission. Power output must range between 250 and 300 horsepower. Additional essential features include fog lights with bi-xenon or LED headlights, adaptive cruise control, assisted parking systems, a 360-degree rear camera, lane change alert packages, blind spot detection, and an advanced audio system supporting Bluetooth and navigation. Safety and comfort are prioritized with driver and passenger airbags, power-folding heated side mirrors, power-adjustable and heated front seats, dual-zone automatic climate control, traction control, emergency braking assistance, forward collision mitigation, and lane departure warning. The vehicle’s exterior should be painted in a dark color and include tinted or privacy glass. The solicitation does not have a separate written document, as this announcement serves as the sole solicitation, with a response deadline of June 30, 2026. The point of delivery is Madrid, Spain, with the vehicle registered tax-free under diplomatic plates. The contracting office is the U.S. Embassy Madrid, and interested parties can contact designated officials via provided emails for further information.
US Embassy Madrid

POSTED

24 days ago

DEADLINE

in 1 day
View Details
NAICS: 3361
Federal
Solicitation notice, Purchase of 8-seater minivanThe U.S. Embassy in Riga, Latvia, is seeking a single eight-passenger minivan to be furnished and delivered under Request for Quote MPR0604517, with delivery required no later than 60 days after contract award at Samnera Velsa Street 1, Riga, Latvia. The vehicle must meet specific technical requirements including a minimum 175 horsepower petrol, diesel, or hybrid engine, automatic transmission, dual airbags, ABS with brake assist, multi-zone climate control, sliding rear doors, left-hand steering, dark interior, full-size spare tire, 775L trunk capacity, heated steering wheel, power features, Bluetooth connectivity, a 48-month warranty with local service support in the Baltic region, and an extra set of winter tires. The contract is a firm-fixed price purchase order with FOB DESTINATION terms, meaning the contractor bears all risks and costs until the vehicle is delivered and accepted at the embassy. Award will be made on a lowest price technically acceptable basis, where only technical acceptability and contractor responsibility are evaluated on a pass-fail basis, and price is the sole deciding factor among qualified respondents. The contractor must provide a Unique Entity Identifier and CAGE code, maintain active SAM registration, and comply with federal acquisition regulations including 52.212-1, 52.225-14, 52.229-6, 52.232-39, 52.244-6, 52.240-91, and 52.252-1, with the English version of the contract controlling in case of translation conflicts. The vehicle must be clearly labeled with brand, model number, OEM number, manufacturer part number, and CAGE code, though detailed packaging, preservation, or labeling standards are not specified. Invoices must be submitted electronically to riga.billing.office@state.gov in compliance with FAR 32.905(e), and the government will make payment to the contractor’s address listed on the contract cover. The contractor must disclose use of AI systems, avoid prohibited products under NDAA Section 889 and FASCSA orders, comply with OFAC sanctions, report non-compliant items within 72 hours, and obtain all necessary local authorizations for performance in Latvia. Proposals must be submitted electronically by June 30, 2026, to Riga
US Embassy Riga

POSTED

26 days ago

DEADLINE

in 1 day
View Details