Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

Vehicle Recompete: ADMIRE — IDIQ ADMIRE

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Airman Decision Making Interface and Research (ADMIRE) is an Indefinite Delivery, Indefinite Quantity (IDIQ) contract managed by the Department of Defense. This vehicle has an established ceiling value of $79,640,417.50 and is currently categorized as a full recompete. The contract period is scheduled to conclude on February 21, 2028. While the contract does not currently show any active task orders with a recorded value, it has historically supported significant projects through various task orders. Key historical task orders under this vehicle include Responsive Operator-Interface Development, awarded to BAE Systems Space & Mission Systems Inc., and multiple iterations of the Intelligent Collaborative & Adaptive Trusted Transparent Teaming Interfaces and Aerospace Physiology & Performance Research projects, primarily awarded to DCS Corporation. The contract is classified under NAICS code 541715 and has not utilized any specific set-asides.

General Info

DoD ADMIRE IDIQ contract with $79.6 million ceiling through February 21, 2028.

Agency

Department Of Defense → Department of Defense

NAICS

541715 - Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

Place of Performance

Not specified

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

pre-forecast

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Department of Defense
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → Department of Defense
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
ADMIRE (IDIQ) — vehicle ADMIRE ordering period ends 2028-02-21T23:00:00.000Z. 0 active task orders valued at $0.
Airman decision making interface and research (admire) Original Solicitation: FA865019S6003 IDV Ceiling: $79,640,417.5 Set-Aside: No set aside used. Contracting Office: Department of Defense Agencies: Department of Defense Classification: full-recompete (Confidence: high - 85/100)
Top task orders by value: - RESPONSIVE OPERATOR-INTERFACE DEVELOPMENT (ROID) ($28,056,804.66) - BAE SYSTEMS SPACE & MISSION SYSTEMS INC. - INTELLIGENT COLLABORATIVE&ADAPTIVE TRUSTED TRANSPARENT TEAMING INTERFACES (ICAT3I) ($24,744,743) - DCS CORPORATION - INTELLIGENT COLLABORATIVE&ADAPTIVE TRUSTED TRANSPARENT TEAMING INTERFACES (ICAT3I) ($24,269,908) - DCS CORPORATION - AEROSPACE PHYSIOLOGY&PERFORMANCE RESEARCH (APPR) ($13,260,438.1) - DCS CORPORATION - AEROSPACE PHYSIOLOGY&PERFORMANCE RESEARCH (APPR) ($13,260,438.1) - DCS CORPORATION

Similar Contracts

Same NAICS industry code

NAICS: 541715
New
International
Marine Scientific ResearchThis subcontract for Marine Scientific Research involves providing specialized research and analysis for prime contractors working on Historic England marine protection projects. The primary objective is to investigate the decay and various threats facing significant marine heritage assets to inform conservation and enhancement strategies. The scope of work includes the use of laboratory analysis equipment to examine marine samples. The selected provider will be responsible for delivering technical reports, research papers, and specific conservation recommendations. This opportunity is associated with NAICS code 541715 and was posted on October 12, 2026, with a response deadline of November 13, 2026.
Historic England

POSTED

about 16 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541715
New
Federal
Building America Subject Matter Expert Technical Support
Solicitation # RFP-2026-10245()
Llc - DOE Contractor Alliance For Energy Innovation

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541715
New
Federal
Airborne Advanced Tactical Data Link (ATDL) Engineering Support (C)The Airborne Advanced Tactical Data Link (ATDL) Engineering Support forecast, issued by Niwc Pacific under the Naval Information Warfare Systems, seeks engineering, subject matter expertise, and Best Manufacturing Practices support for Hardware Defined Radio and Software Defined Radio systems. This effort is designed to support U.S. Department of Defense programs and Military Forces, specifically focusing on digital data link systems such as the Joint Tactical Radio System, Multifunctional Information Distribution System, Joint Tactical Information Distribution System, and the Command and Control Processor. The scope of work encompasses a variety of networks, waveforms, and protocols, including Link-16, Soldier Radio Waveform, Tactical Targeting Networking Technology, and other emergent SDR technologies. Performance for this contract is expected to take place in San Diego, with the project falling under NAICS code 541715. Dan Nardi serves as the primary point of contact for this acquisition.
Niwc Pacific

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 541715
New
Federal
LIPTM00397 - CANES Engineering IPT - IWRP 25-LANT-2814 (C)The LIPTM00397 contract, titled CANES Engineering IPT - IWRP 25-LANT-2814, is a forecast for the CANES NextGen IWRP prototype managed by Naval Information Warfare Systems through Niwc Atlantic. This effort falls under NAICS code 541715 and is scheduled for posting on October 11, 2026. The primary place of performance for this project is located in North Charleston. Administrative oversight for this requirement is handled by Contracting Officer Giancarlo Dumenigo, with Kristopher Garris serving as the secondary point of contact. The project is part of a broader long range acquisition strategy to advance engineering and prototype capabilities for the Navy's next generation of integrated wireless routing and processing.
Niwc Atlantic

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 541715
New
Federal
Modeling & Simulation-28 Contract
Naval Information Warfare Systems

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 541715
New
SLED
Lead Epidemiologist / Public Health Research FirmThis subcontract opportunity is for a Lead Epidemiologist or Public Health Research Firm to provide scientific leadership and design for a retrospective epidemiological study supporting the County of San Diego Public Health Services. The selected partner will be responsible for developing study protocols, defining geographic exposure zones, and evaluating exposure-response relationships related to chemical pollution impacts. Key requirements for the role include specialized expertise in Trauma-Informed Systems and a deep understanding of Environmental Justice communities. The primary deliverables for this engagement are the Study Protocol and a Final Report. The work will be performed in San Diego, California, under NAICS code 541715. Interested parties must submit their responses by the deadline of October 31, 2026.
County of San Diego

POSTED

4 days ago

DEADLINE

in 18 days
View Details
NAICS: 541715
New
Federal
SI Model Development and Training ServicesThe SI Model Development and Training Services subcontract involves the design, training, and fine-tuning of AI and SI models to support video intelligence projects for the Department of Homeland Security ICE. The scope of work includes implementing model explainability, labeling, and human-in-the-loop oversight using data provided by ICE. To avoid vendor lock-in, the contractor must ensure all outputs are non-proprietary and machine-readable, delivering final trained models, model weights, and comprehensive provenance documentation. This opportunity is managed by the Information Technology Division and is based in Washington, DC. Due to the sensitive nature of the work, personnel are required to hold Secret or Top Secret clearances, and the performing entity must possess a DSS Facility Clearance. Interested parties should note the response deadline of October 26, 2026.
Information Technology Division

POSTED

4 days ago

DEADLINE

in 13 days
View Details
NAICS: 541715
New
Federal
Mobile Integrated Launch Capability
Solicitation # 26-MDA-12366
The Missile Defense Agency (MDA) is soliciting innovative and cost-efficient alternatives to current C-17 air drop target launches through the Mobile Integrated Launch Capability (MILC) program. The objective is to develop mobile launch platforms capable of deploying short to long-range target missile systems, including ballistic, air-breathing, and maneuvering targets, from various global locations via ground, sea, or air. This effort is structured in two phases: Phase I focuses on detailed design, engagement analysis, and prototype costing with an objective period of three months; Phase II involves prototyping, ground testing, and the delivery of one launch platform for a demonstration launch, with an objective period of twelve months. The solicitation follows a two-step competitive process based on the evaluation of white papers, which are judged on technical merit, innovation, potential utility to agency programs, schedule adherence, and lifecycle cost. Offerors must be registered in the System for Award Management and maintain an active Secret Facility Clearance to handle classified information. Procurement may be executed through Revolutionary Federal Acquisition Regulation (RFO) based contracts or Other Transaction (OT) agreements, the latter of which prioritize commercial industry standards. Submissions must include a detailed program plan, a Rough Order of Magnitude cost estimate, and a full disclosure of any organizational conflicts of interest.
Missile Defense Agency (mda)

POSTED

4 days ago

DEADLINE

in almost 2 years
View Details
NAICS: 541715
New
Federal
MTEC Solicitation Summary: Fiscal Year 2026 Multi-Topic Request for Project Proposals
Solicitation # MTEC-26-04-MultiTopic
The Medical Technology Enterprise Consortium (MTEC), in collaboration with the Defense Health Agency, is soliciting project proposals under solicitation MTEC-26-04-MultiTopic for medical prototype technological and knowledge solutions. Authorized under 10 U.S.C. section 4022 and utilizing an Other Transaction Agreement, this effort seeks to modernize medical capabilities to maintain force readiness and soldier lethality in future multi-domain conflicts. The solicitation covers 16 distinct Focus Areas, including behavioral health, physical fitness, wound infection prevention, sepsis treatment, musculoskeletal injury interventions, non-addictive analgesics, blast and blunt impact sensors, and a multisite clinical biomarker platform for lung and kidney failure. Proposals are submitted via a two-stage Enhanced White Paper process, where selected Stage 1 submissions are invited to provide full cost proposals in Stage 2. To be eligible, projects must demonstrate clear military relevance, meet a minimum Knowledge/Technology Readiness Level of 3, and fit the specific definition of a prototype rather than being exploratory. Additionally, solutions must not have been submitted to MTEC within the last two years. While average initial awards range from 2.0 to 3.5 million dollars over a two to three year period, specific funding and performance periods vary by Focus Area. Teaming is encouraged, and successful projects may be eligible for non-competitive follow-on tasks.
Defense Health Agency

POSTED

4 days ago

DEADLINE

in 17 days
View Details
NAICS: 541715
New
Federal
Atomically Precise Molecules (APM)
Solicitation # DARPA-PS-26-141
The Defense Advanced Research Projects Agency (DARPA) Multi X Office is soliciting proposals for the Atomically Precise Molecules (APM) program under solicitation DARPA-PS-26-141. The program aims to develop innovative synthesis techniques for programmable precision polymers (PPPs) and nonlinear optical (NLO) materials to overcome performance gaps in optical communications and LiDAR. The primary objective is the creation of scalable, fit-for-purpose materials, culminating in a prototype demonstration of a revolutionary NLO material integrated into a government-provided electro-optic modulator. Research focusing solely on inorganic materials or incremental improvements to the state-of-the-art is specifically excluded. This 36-month effort is structured in two technical phases, with Phase I focusing on developing PPP synthesis capabilities over the first 12 months. Awards will be issued as Other Transaction (OT) for Prototype Agreements under 10 U.S.C. 4022. Key requirements include CMMC Level 2 self-assessment compliance and adherence to a program-specific Controlled Unclassified Information (CUI) guide. Non-US organizations, FFRDCs, UARCs, and government entities are ineligible to serve as prime performers, though FFRDCs and UARCs may participate as subawardees provided they meet specific certification and conflict of interest mitigation requirements. Proposals must be submitted via the Broad Agency Announcement Tool (BAAT) by December 18, 2026. Submissions must include a technical and management volume, a price proposal with a detailed spreadsheet, a Task Description Document, and a schedule of milestones and payments. Evaluation will be based on the technical approach, relevance to the DARPA mission, budget realism, and the capability to transition the technology to military or commercial sectors. Payments are milestone-based and processed through the Wide Area Workflow (WAWF) system.
Defense Advanced Research Projects Agcy

POSTED

4 days ago

DEADLINE

in 2 months
View Details
NAICS: 541715
New
Federal
Lunar Enabling Infrastructure Accelerator (LEIA) -Broad Agency Announcement (BAA) NextSTEP-3 Appendix A - Final Solicitation
Solicitation # 80GRC026R0008
The Lunar Enabling Infrastructure Accelerator (LEIA) is a full and open competition solicitation issued by the NASA Glenn Research Center under the NextSTEP-3 Broad Agency Announcement. The program seeks industry partners to design, develop, and demonstrate prototype systems to mature critical lunar and cislunar infrastructure technologies from lower technology readiness levels toward TRL 5-6. The scope is divided into five technical topics: Vertical Solar Arrays, In-Situ Resource Utilization (ISRU) Oxygen from Regolith Production, Radioisotope Stirling Generators, In-Space Advanced Manufacturing, and Innovative Nanomaterials Production. Awards will be firm-fixed-price contracts with an anticipated total period of performance not exceeding three years, with awards expected in the second quarter of fiscal year 2027. Proposals are evaluated based on a pass/fail assessment of relevance and past experience, followed by a scored evaluation of technical merit, which includes the technical approach, execution strategy, work plan, organizational readiness, personnel qualifications, and risk mitigation. Price and business volumes are reviewed for fairness, reasonableness, and risk but are not numerically scored. Offerors must submit a comprehensive proposal package via NASA's EFSS Box, including a detailed work plan in the form of a Statement of Work, an Organizational Conflicts of Interest plan, and required eligibility certifications. All deliverables must adhere to strict NASA security, cybersecurity, and equipment marking standards, with final inspection and acceptance occurring at the destination.
NASA Glenn Research Center

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 541715
New
Federal
Pioneering Aerospace Capabilities, Engineering and Research
Solicitation # FA2391-23-S-2403
The Pioneering Aerospace Capabilities, Engineering and Research (PACER) program, under solicitation FA2391-23-S-2403, is a comprehensive Broad Agency Announcement issued by the Air Force Research Laboratory (AFRL) Aerospace Systems Directorate. This initiative utilizes a two-step open BAA and BAA with Calls to fund research and development efforts aimed at maturing novel aerospace concepts and technologies to appropriate technology readiness levels. The program encompasses a wide array of specialized projects, including hypersonic weapon concepts (HAMWC), automated air-to-air refueling (CRONUS), advanced propulsion and power systems (SNAPP, AEPO, MSIPPT, INNATE, HITEMP), and multidisciplinary design and structures research (MASTR, VOLARE, CC DROIDS). The program employs various contract vehicles, including IDIQ contracts with CPFF or FFP task orders and Cooperative Agreements, with some individual calls featuring program ceilings up to 500 million dollars. Awards are based on peer or scientific review, focusing on technical innovation, soundness of approach, and transition potential, with cost realism serving as a secondary factor. Due to the sensitive nature of the research, offerors must adhere to strict security protocols, including AFRLI 61-113 S&T Protection guidelines, CMMC Level 2 self-assessments, and NIST SP 800-171 compliance for access to Controlled Unclassified Information (CUI) and classified data. Administrative requirements mandate that proposals be submitted in separate technical and cost volumes via DoD SAFE, with specific formatting and page limits tailored to each call. Contractors are required to use the Wide Area Workflow (WAWF) system for invoicing and must comply with rigorous packaging and marking standards, such as MIL-STD-129 and MIL-STD-130. The BAA remains open for submissions until May 10, 2043, providing a long-term framework for pioneering transformative aerospace technologies for the warfighter.
FA2391 USAF Afmc Afrl Pzl Afrl Rqkp

POSTED

4 days ago

DEADLINE

in over 4 years
View Details

More opportunities from Department Of Defense → Department of Defense

Same awarding agency

NAICS: 541715
Federal
AFRL Enterprise CSO: Centralized Open Spiral
Solicitation # FA865226SC005
Solicitation FA865226SC005 is a Centralized, Open Two-Step Spiral issued by the Air Force Research Laboratory under the Defense Commercial Solutions Opening (CSO) framework in accordance with R-DFARS 212.70. The government is seeking Commercial Solutions Brief (CSB) submissions for innovative solutions ranging from advanced component development to operational systems development, specifically limited to Foundational Technologies (AFRL/RE). This procurement follows a two-step process where only CSB submissions are currently requested; offerors must be categorized as Selectable during the Step One evaluation to be invited to Step Two, which involves the submission of a Commercial Solutions Proposal (CSP). The deadline for Step One CSB submissions is 5:00 PM Eastern on April 30, 2027. Submissions must align with the Areas of Interest identified in Attachment 1 of the AFRL Enterprise CSO and follow the formatting instructions in Section 7 and Attachment 2 of the main announcement. While there is no limit on the number of CSBs a single offeror may submit, each must present a unique approach. Submissions should be emailed to afrl.cso.mailbox@us.af.mil, though those containing Controlled Unclassified Information must be transmitted via the DoD SAFE system. This spiral was noted as cancelled effective June 4, 2026, with future spirals transitioning to a decentralized model issued by respective Mission Organizations.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

4 months ago

DEADLINE

in 7 months
View Details
NAICS: 332999
Federal
Precision Hardware Fabrication and Component SupplyThis subcontract for Precision Hardware Fabrication and Component Supply supports the AFRL Materials and Manufacturing Directorate by providing the supply and fabrication of physical components and prototypes for prime contractors. The scope of work involves manufacturing components according to specific R&D requirements, procuring specialized equipment, and performing precision machining. All deliverables must adhere to DFARS 252.211-7003 standards for Item Unique Identification marking. The contractor is responsible for delivering physical hardware and components along with comprehensive Operations, Maintenance, Installation, and Training data. Managed by the Department of Defense under agency FA8650, the project falls under NAICS code 332999. The contract period extends from the posting date of May 28, 2026, with a response deadline of February 19, 2028.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

5 months ago

DEADLINE

in over 1 year
View Details
NAICS: 332710
Federal
Additive Manufacturing Design and PrototypingThis subcontract, titled Additive Manufacturing Design and Prototyping, focuses on the development and implementation of additive manufacturing technologies for prime contractors supporting AFRL Materials and Manufacturing Directorate projects. The primary objective is to utilize industrial metal and polymer 3D printing equipment and specialized design software to bypass long-lead production times while adhering to airworthiness community standards. The contractor is responsible for delivering additive manufacturing prototypes, technical reports, and Form, Fit, and Function data. This effort is managed by the Department of Defense under the agency FA8650 USAF Afmc Afrl Pzl Afrl/pzl, with a NAICS code of 332710. The opportunity was posted on May 28, 2026, with a response deadline of February 19, 2028.
Machine Shops

POSTED

5 months ago

DEADLINE

in over 1 year
View Details
NAICS: 541715
Federal
Advanced Alloys and Materials ResearchThe Advanced Alloys and Materials Research subcontract, issued by the Department of Defense under the USAF AFMC AFRL, focuses on the research and development of conventional and advanced alloys for prime contractors. The project aims to modernize production processes to enhance speed and reduce costs, requiring specialized expertise in metallurgy and material science. The contractor is responsible for delivering material characterization data and scientific and technical reports as specified by CDRL A001. This opportunity falls under NAICS code 541715, with a response deadline of February 19, 2028.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

5 months ago

DEADLINE

in over 1 year
View Details
NAICS: 541611
Federal
Technical Documentation and CDRL ManagementThis subcontract, titled Technical Documentation and CDRL Management, supports the AFRL Materials and Manufacturing Directorate by providing formal documentation and delivery of scientific and technical data for prime contractors. The scope of work involves formatting reports according to ANSI/NISO guides and managing DD Form 1423-1 Contract Data Requirements List submissions. Success in this role requires specialized expertise in technical writing and adherence to SF 298 standards to ensure the delivery of final scientific and technical reports. The opportunity is issued by the Department of Defense under the agency FA8650 USAF Afmc Afrl Pzl Afrl/pzl and is categorized under NAICS code 541611. It was posted on May 28, 2026, with a response deadline of February 19, 2028.
Administrative Management and General Management Consulting Services

POSTED

5 months ago

DEADLINE

in over 1 year
View Details
NAICS: 541511
Federal
Manufacturing Optimization & Digital Twin SoftwareThis subcontract opportunity with the Department of Defense, specifically for the USAF AFMC AFRL, focuses on the development of computer software to support digitalized conventional production and schedule optimization for prime contractors within the AFRL Materials and Manufacturing Directorate. The project requires specialized expertise in software engineering and digital manufacturing integration to create platform-agnostic manufacturing tools and digital twins. The selected provider will be responsible for delivering comprehensive computer software, including all relevant source code and technical documentation. This effort falls under NAICS code 541511 and has a response deadline of February 19, 2028.
Custom Computer Programming Services

POSTED

5 months ago

DEADLINE

in over 1 year
View Details
NAICS: 541715
Federal
Endless Forge
Solicitation # FA2394-26-R-B003
Endless Forge is a Manufacturing as a Service initiative led by the Air Force Research Laboratory Materials and Manufacturing Directorate to establish an adaptive, scalable, and resilient production network for the US industrial base. The program aims to shift from sequential value chains to regionalized production networks, enabling the Department of the Air Force to rapidly scale weapon systems based on battlefield performance. With a total estimated program cost of 149 million dollars and multiple awards anticipated, the solicitation focuses on two primary Areas of Interest: technology sprints to reduce risk in enabling technologies like digital certification and software-defined manufacturing, and a technology demonstration to validate the concept across domains such as space systems and autonomous platforms. This unrestricted solicitation, number FA2394-26-R-B003, utilizes a two-step process requiring a five-page white paper followed by a full proposal for selected offerors, with a response deadline of February 19, 2028. Anticipated contracts include Other Transaction for Prototype and Cost Plus Fixed Fee types, with a technical performance period of 33 months. Key requirements include strict adherence to security risk reviews for key personnel to mitigate foreign influence, compliance with NIST SP 800-171 and CMMC cybersecurity standards, and the use of the Wide Area Workflow system for invoicing. Deliverables encompass research and development data, scientific and technical reports, and hardware prototypes that must meet MIL-STD-130 unique item identification and MIL-STD-129 packaging standards.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

5 months ago

DEADLINE

in over 1 year
View Details
NAICS: 541721
Federal
Materials Data Analytics and ModelingThis contract focuses on computational modeling, simulation, and data analytics aimed at predicting material behavior and accelerating material discovery processes. It also supports the development of digital twins for structural systems, enhancing the ability to replicate and analyze the performance of real-world structures virtually. The work is intended to provide advanced tools and insights in materials science that can improve the design, testing, and maintenance of structural systems. Issued by the Department of Defense, specifically the Air Force Research Laboratory at Wright Patterson Air Force Base, this subcontract falls under the NAICS code 541721, which pertains to research and development in physical, engineering, and life sciences. The contract was posted in April 2026 with a response deadline set for September 2027, allowing interested parties ample time to prepare their proposals. The work location is designated at Wright Patterson AFB, Ohio, emphasizing its strategic importance for military and defense-related material innovation and technology development.

POSTED

6 months ago

DEADLINE

in 11 months
View Details
NAICS: 332999
Federal
Additive Manufacturing (3D Printing) for Structural ComponentsThe contract focuses on researching and applying additive manufacturing techniques to create complex, lightweight structural components using metals, polymers, or composite materials specifically for aerospace applications. It aims to advance the production capabilities of these materials through 3D printing technology to meet the stringent requirements of aerospace structural components. The work will be performed primarily at Wright Patterson Air Force Base under the Department of Defense's Air Force Research Laboratory, indicating a strong emphasis on defense and aviation sector innovation. This subcontract opportunity falls under the NAICS code 332999, which relates to manufacturing activities associated with metal products not elsewhere classified. The contract was posted on April 22, 2026, with a response deadline set for September 20, 2027, allowing over a year for submissions. While details such as specific set-aside designations or organizational type preferences are not specified, the contract is issued by the USAF's AFRL materials and manufacturing division, highlighting the government’s ongoing commitment to developing advanced manufacturing processes to enhance aerospace structural performance and reduce component weight.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

6 months ago

DEADLINE

in 11 months
View Details
NAICS: 334511
Federal
Structural Health Monitoring (SHM) Sensor IntegrationThe contract focuses on the design and integration of embedded sensors and diagnostic systems tailored for real-time monitoring of structural integrity in aircraft and spacecraft components. This involves the development of advanced Structural Health Monitoring (SHM) capabilities to enhance the safety, reliability, and maintenance efficiency of critical aerospace structures. The work will be performed as a subcontract under the Department of Defense, specifically managed by the USAF Air Force Research Laboratory located at Wright Patterson Air Force Base. Key details include its classification under NAICS code 334511, which pertains to designing and manufacturing electronic components. The solicitation was posted in April 2026, with a response deadline set for September 2027, indicating an extended period for comprehensive proposal development. The initiative aligns with military and aerospace objectives by integrating cutting-edge sensor technology for proactive damage detection and diagnostic analysis, ensuring that both aircraft and spacecraft maintain optimal performance standards over their operational lifespan.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

6 months ago

DEADLINE

in 11 months
View Details
NAICS: 331492
Federal
Metallic Alloys and High-Temperature Materials ResearchThis contract focuses on the research and development of advanced metallic alloys, specifically titanium and nickel-based superalloys, designed to withstand the high-temperature environments encountered in aerospace applications such as turbine engines and hypersonic vehicles. The work involves creating materials that enhance performance, durability, and heat resistance, which are critical for the next generation of aerospace technologies. The research is expected to contribute significantly to improving propulsion systems and enabling greater operational capabilities for military and aerospace platforms. Issued by the Department of Defense under the USAF Afmc Afrl Pzl Afrl/pzl agency, the subcontract is associated with NAICS code 331492, relating to iron and steel foundries. The project will be carried out primarily at Wright Patterson Air Force Base in Ohio. The contract solicitation was posted in April 2026, with a response deadline set for September 20, 2027. This effort is integral to advancing materials science within defense aerospace sectors, providing crucial support to maintaining technological superiority in high-performance aircraft and hypersonic systems.
Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

6 months ago

DEADLINE

in 11 months
View Details
NAICS: 325998
Federal
Advanced Composite Materials DevelopmentThis contract focuses on the research, design, and development of advanced composite materials specifically engineered for aerospace structures. The materials under development include polymer matrix composites and ceramic matrix composites, with an emphasis on achieving superior strength-to-weight ratios, enhanced thermal stability, and improved durability. The objective is to create high-performance materials that can meet demanding aerospace requirements, contributing to overall structural efficiency and longevity. Issued by the Department of Defense through the United States Air Force Material Command’s Air Force Research Laboratory (AFRL) located at Wright Patterson Air Force Base, this subcontract is categorized under NAICS code 325998. The solicitation was posted in April 2026, with responses due by September 2027. The contract’s place of performance is Wright Patterson AFB, Ohio (ZIP code 45433), highlighting its alignment with cutting-edge aerospace research and development initiatives.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

6 months ago

DEADLINE

in 11 months
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS