Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Vehicle Towing Services

Active

State & Local

Response Deadline11/23/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Vehicle Towing Services involves the recovery and transport of non-drivable passenger and emergency vehicles for prime contractors working on State of Iowa vehicle projects. The scope of work requires the use of flatbed or wheel-lift tow trucks to safely move vehicles from incident sites or storage locations to designated repair facilities. Operations are focused within the Decorah, Ottumwa, Sioux City, and Quad Cities areas. The opportunity was posted on November 2, 2026, with a response deadline of November 23, 2026, falling under NAICS code 488410.

General Info

Agency

NAICS

488410 - Motor Vehicle Towing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of 005-RFB-3186-2027.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Auto Body Repair Services

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineNov 23

Submission deadline

Response Deadline

11/23/2026, 06:00:00 PM UTCin 21 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyIowa

ContactsNo contacts available

OfficeN/A

Organization / AgencyIowa

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provides towing and transport of non-drivable vehicles for prime contractors on State of Iowa vehicle projects. Performs recovery and towing of passenger and emergency vehicles using flatbed or wheel-lift tow trucks. Operates within Decorah, Ottumwa, Sioux City, and the Quad Cities areas. Delivers safe transport of vehicles from incident sites or storage to designated repair facilities.

Similar Contracts

Same NAICS industry code

MIL-STD Compliant Packaging and Marking ProviderThis subcontract opportunity is for a provider to perform military-grade packaging, preservation, and identification marking for prime contractors supporting DLA Troop Support Construction and Equipment projects. The selected provider will be responsible for delivering properly marked and preserved steel bars ready for shipment, ensuring all work is executed in strict accordance with MIL-STD-129 for stamping and stenciling, as well as MIL-STD-2073-1E and ASTM A700 for packaging and preservation. The project is associated with the Department of Defense and will be performed at the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. Interested parties must respond by November 13, 2026, regarding this requirement categorized under NAICS code 488410.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

Military-Grade Packaging and Shipping ServicesThis subcontract for Military-Grade Packaging and Shipping Services supports prime contractors delivering to the Department of Defense under DLA Weapons Support Land Supplier Operations Vehicle Support contracts. The scope of work involves providing specialized packaging materials and performing professional packing and marking services to ensure all units meet strict military standards, specifically ASTM D3951, MIL-STD-129, and RP001 DLA Packaging Requirements. The service provider is required to utilize military-specification materials and marking equipment to prepare shipments for FOB Origin transport to DLA Distribution Red River. Performance for this contract takes place in Texarkana, Texas, under NAICS code 488410. Interested parties must respond by November 13, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing specialized packaging, marking, and preparation services for heavy industrial equipment intended for overseas shipment to Taiwan. The scope of work requires the delivery of two winch drums processed according to MIL-STD-2073-1E and MIL-STD-129 standards, specifically utilizing Preservation Method 10 and Cleaning/Drying 1. To ensure the integrity of the shipment, the contractor must use military-grade preservation materials and moisture barriers for FOB Origin transport. The project is managed under the Department of Defense for Construction & Equipment Manu & Con, falling under NAICS code 488410. Interested parties must adhere to the timeline established by the posting date of November 2, 2026, with a response deadline set for November 13, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Crating Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Crating Services

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract opportunity is for the provision of specialized military-grade packaging and marking services to support prime contractors on DLA Weapons Support Maritime Supply Chain projects. The scope of work involves the processing of 49 circuit breakers, requiring strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for markings, specifically utilizing Preservation Method 41. The selected provider must use approved military-grade materials and labeling equipment to ensure all items are fully prepared for First Destination Transportation shipment. The project is issued by the Department of Defense under the DLA Weapons Support Maritime Supply Chain agency and is designated as a Total Small Business Set-Aside. Interested parties must respond by November 17, 2026, regarding this requirement categorized under NAICS code 488410.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ProviderThis subcontract opportunity is for a MIL-SPEC Packaging and Marking Provider to support prime contractors on projects for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The selected provider will be responsible for executing military-grade packaging and marking in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards, utilizing the Fragile marking code. A critical requirement of the performance is ensuring that all materials used are mercury-free and that shipments are delivered fully prepared for final destination delivery. The project is designated as a Total Small Business Set-Aside under NAICS code 488410. Interested parties must submit their responses by November 16, 2026. This contract focuses on high-precision logistics and compliance to meet rigorous military specifications for weapons support commodities.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Military Standard Packaging and Marking ServicesThis subcontract for Military Standard Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves the specialized packaging and marking of critical aerospace and weaponry hardware, specifically the delivery of 13 shoulder bolts prepared for FOB Origin shipment. All work must be performed in strict accordance with MIL-STD-2073-1E and MIL-STD-129 using military-grade materials and compliant labeling equipment. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and is categorized under NAICS code 488410. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 2, 2026, with a response deadline of November 10, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Aerospace Component Packaging and Marking Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ProviderThis subcontract involves providing specialized military-grade packaging and marking services for prime contractors supporting the Department of Defense DLA Weapons Support Maritime Supply Chain. The scope of work requires the processing of 507 units of switches, ensuring all items are packaged according to DLA RP001 and MIL-STD-2073-1E Preservation Method 41. The provider must utilize specialized labeling equipment and moisture barriers to apply markings and labels in strict accordance with MIL-STD-129. This effort falls under NAICS code 488410 and is focused on preparing critical components for secure shipment.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ProviderThis HUBZone set-aside subcontract involves providing specialized military-grade packaging and marking services for electronic components supporting the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The selected provider will be responsible for packaging components using anti-static and moisture-barrier materials in strict accordance with MIL-STD-2073-1E and RP001 standards. Additionally, all items must be marked according to MIL-STD-129 and delivered fully labeled for shipment to designated DLA destinations. The opportunity is categorized under NAICS code 488410 and was posted on November 2, 2026. Interested parties must submit their responses by the deadline of November 17, 2026. This contract is specifically designed for prime contractors requiring expert compliance with military specifications to ensure the integrity and traceability of electronic components within the maritime supply chain.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Defense-Standard Packaging ServicesThis subcontract for Defense-Standard Packaging Services supports the Department of Defense through the DLA Weapons Support Maritime Supply Chain. The scope of work involves providing specialized packaging and marking for electronic modules to ensure safe transit for prime contractors. All services must adhere to strict technical standards, specifically utilizing ASTM D3951 and RP001 for packaging and MIL-STD-129 for markings, while employing anti-static materials and MIL-SPEC containers. The project requires the delivery of modules that are fully packaged and labeled for FOB Origin shipment. Interested parties should note that the response deadline is November 17, 2026, and the work falls under NAICS code 488410.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

More opportunities from Iowa

Same awarding agency

OEM Automotive Parts SupplierThis subcontract opportunity is for an OEM Automotive Parts Supplier to provide genuine original equipment manufacturer components for prime contractors working on State of Iowa vehicle projects. The selected supplier is responsible for sourcing and delivering parts that meet exact manufacturer specifications for specific state fleet makes and models, ensuring all components are delivered directly to the designated repair facility. A critical requirement of the contract is the provision of the manufacturer's standard warranty on all supplied parts. Interested parties should note that the response deadline is November 23, 2026, and the procurement falls under NAICS code 441330.

Automotive Parts and Accessories Retailers

POSTED

about 5 hours ago

DEADLINE

Automotive Mechanical Repair and Alignment ServicesThis subcontract for Automotive Mechanical Repair and Alignment Services involves providing specialized mechanical operations and precision alignment for prime contractors working on State of Iowa vehicle projects. The scope of work includes the removal, installation, and replacement of critical systems such as steering, suspension, braking, HVAC, electrical, engine, and drive train assemblies. Additionally, the contractor is responsible for performing four-wheel alignments using specialized machinery and must provide verified alignment reports and fully functioning mechanical systems. To qualify for this engagement, the contractor must hold a Section 609 Clean Air Act certification to ensure compliant refrigerant recycling. The opportunity is categorized under NAICS code 811111 and was posted on November 2, 2026, with a response deadline of November 23, 2026.

General Automotive Repair

POSTED

about 5 hours ago

DEADLINE

Auto Body and Collision Repair ServicesThis subcontract for Auto Body and Collision Repair Services involves providing comprehensive collision repair and structural restoration for prime contractors working on State of Iowa vehicle projects. The scope of work includes structural straightening, 3D vehicle measuring, steel fusion welding, and refinishing within enclosed spray booths to ensure all vehicles are delivered according to OEM standards. To qualify, providers must operate a licensed commercial facility equipped with a 7,000 lb capacity two-post lift and 3D measuring systems. Additionally, staff members are required to be trained in estimating and steel sectioning. The solicitation was posted on November 2, 2026, with a response deadline of November 23, 2026.

Automotive Body, Paint, and Interior Repair and Maintenance

POSTED

about 5 hours ago

DEADLINE

Auto Body Repair Services

Solicitation # 005-RFB-3186-2027

The State of Iowa is seeking eligible bidders for a non-exclusive, multiple-award contract to provide auto body repair services for state vehicles, specifically to fill coverage gaps in Decorah, Ottumwa, Sioux City, and the Quad Cities. The contract begins upon award and runs through March 31, 2028, with the agency holding the option for up to four annual extensions. To be deemed a responsible bidder, contractors must possess a five-year business history in auto collision repair and operate a licensed commercial facility in Iowa or within 30 miles of the border. Technical requirements are stringent, requiring a two-post lift with at least 7,000 lbs capacity, an enclosed spray booth, a three-dimensional vehicle measuring system, and specific welding and dent removal equipment. Additionally, at least one staff member must be trained in estimating, refinishing, and steel welding/sectioning, and the facility must hold certifications for refrigerant recycling per Section 609 of the Clean Air Act. Operational mandates include the use of OEM parts unless otherwise approved, a three-year warranty on labor, and the prioritization of emergency and law enforcement vehicles. Contractors are responsible for towing vehicles to their facility at no cost to the state. Administratively, bidders must agree to a 60-day payment term and provide detailed quarterly sales reports in Microsoft Excel. Invoicing is handled via email to the DAS Fleet Risk Manager, and any requested hourly rate increases during renewal years are capped at 3% and require state approval. The state maintains the right to review and approve all estimates before work commences.

Automotive Body, Paint, and Interior Repair and Maintenance

POSTED

about 5 hours ago

DEADLINE

Masonry ContractorThis subcontract agreement is for a masonry contractor to perform specialized tuckpointing and masonry repairs at Corbett-Miller Hall for the Iowa Department of Administrative Services. The selected contractor will work under prime contractors to execute mortar restoration and general masonry repairs in strict accordance with provided design specifications to ensure the structural and aesthetic restoration of the facility. The opportunity was posted on November 2, 2026, with a response deadline of December 9, 2026. Classified under NAICS code 238130, the contract focuses on the delivery of completed masonry restoration services within the state of Iowa.

Framing Contractors

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Commercial Refrigeration ContractorThis subcontract opportunity is for a Commercial Refrigeration Contractor to support prime contractors on projects managed by the Iowa Department of Administrative Services. The selected contractor will be responsible for the installation of commercial refrigeration systems and bakery cooler enclosures, ensuring all work is completed according to design specifications to deliver fully operational units. The solicitation was posted on November 2, 2026, with a response deadline of December 9, 2026. Falling under NAICS code 238220, this project focuses on specialized plumbing, heating, and air-conditioning mechanical contracting within the state of Iowa.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Masonry Assessment and Restoration SpecialistThis subcontract opportunity is for a Masonry Assessment and Restoration Specialist to provide technical assessments and design specifications for masonry repairs on Iowa Department of Administrative Services projects. The selected specialist will perform site surveys of Corbett-Miller Hall to identify mortar failure and determine appropriate mortar types and tuckpointing methods utilizing building envelope diagnostic equipment. The final deliverables for this engagement include a comprehensive condition assessment report and detailed repair specifications. Qualified candidates must be a Professional Engineer or a certified building envelope specialist. The solicitation was posted on November 2, 2026, with a response deadline of December 9, 2026. This project falls under NAICS code 541330 and is managed by the state of Iowa.

Engineering Services

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Commercial Kitchen/Cold Storage Design ConsultantThis subcontract opportunity is for a Commercial Kitchen/Cold Storage Design Consultant to provide specialized design and engineering services for the replacement of a bakery cooler enclosure. Working for prime contractors on Iowa Department of Administrative Services projects, the selected consultant will be responsible for developing technical specifications, layouts, and drawings for a commercial cooler enclosure utilizing insulated paneling systems and commercial refrigeration standards. The project requires the consultant to be a Licensed Architect or Professional Engineer licensed in the State of Iowa to provide signed and sealed design drawings and technical specifications. Interested parties must submit their responses by December 9, 2026, in accordance with the solicitation posted on November 2, 2026.

Architectural Services

POSTED

about 9 hours ago

DEADLINE

in about 1 month

HHS STS Bakery Cooler Enclosure Replacement and Corbett-Miller Hall Tuckpointing

Solicitation # RFP956600-01

The Iowa Department of Administrative Services is soliciting professional design services under RFP956600-01 for two specific projects at the State Training School for Boys located at 311 Edington Ave, Eldora, Iowa. The scope of work includes the replacement of one bakery cooler enclosure and the performance of masonry repairs, specifically tuckpointing, on the Corbett-Miller Hall. The solicitation was posted on November 2, 2026, with a response deadline of December 9, 2026, at 2:00 PM Central Time. Interested respondents must submit their proposals through separate files consisting of a Technical Proposal and a Cost Proposal. The Technical Proposal must not contain any pricing information or exceptions to contract terms. For any information requiring confidential treatment, respondents must complete Part 2 of Form 22, mark the proposal and specific pages accordingly, and provide a redacted public copy. The contract administration is managed by Michael Bradbury, and the established payment terms are Net 60.

Architectural Services

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Gas Piping ContractorThis subcontract opportunity is for a Gas Piping Contractor to install new gas lines at the Ames Hub Building for Iowa Department of Transportation projects. The scope of work includes trenching, piping installation, pressure testing, and connecting the gas line to the generator unit utilizing professional welding and threading equipment. The final deliverable is a fully completed and certified gas line system. Qualified contractors must hold a licensed gas fitter or plumber certification and ensure all work adheres to local Iowa building codes. This project falls under NAICS code 238220. Interested parties must submit their responses by the deadline of November 19, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Generator Installation ContractorThis subcontract opportunity is for a Generator Installation Contractor to support prime contractors on Iowa Department of Transportation projects at the Ames Hub Building. The scope of work involves the removal of an existing generator unit and the subsequent positioning, installation, and electrical connection of a new system to ensure full operational integration. The selected contractor must utilize professional rigging equipment and electrical testing tools to deliver a completely functional generator system. Qualified bidders must possess valid Iowa state electrical licensing to perform the required work. This project falls under NAICS code 238210. Interested parties must submit their responses by the deadline of November 19, 2026, as specified in the solicitation posted on October 29, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Generator Equipment SupplierThis subcontract agreement is for a generator equipment supplier to provide a new generator unit for the Ames Hub Building as part of an Iowa Department of Transportation project. The selected supplier is responsible for delivering a unit that meets all specifications outlined in the Project Manual and Plans, ensuring that the equipment is delivered directly to the project site. To maintain the overall project timeline, the supplier must provide accurate lead times for any fabricated or custom-built components. Interested parties must submit their responses by November 19, 2026, in accordance with the solicitation posted on October 29, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS