Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

VENTILATOR, AIR CIRC

Active
SPE7M0-26-T-036MFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for a single unit of a ventilator, air circ, identified by NSN 2040-01-369-6999 and part number ML-89, supplied by Spiral Metals Corporation of Baton with purchase request 7017722161. Delivery is required within five days of contract award, with goods to be shipped FOB origin and no tolerance for quantity variance. All items must be packaged in compliance with ASTM D3951, but any conflicting requirements from the DLA Master List of Technical and Quality Requirements take precedence. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001: DLA Packaging Requirements for Procurement. The use of mercury or mercury-containing compounds is strictly prohibited unless explicitly exempted for functional components such as batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, with portable mercury-containing devices requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. Shipment must be made by the fastest traceable means, prohibited from parcel post, and directed to the designated freight shipping address in Virginia Beach. The required delivery date is August 4, 2026, with a solicitation response deadline of August 21, 2026. Inspection and acceptance occur at the destination, and all government-specific identifiers and shipping instructions, including the DLA procurement identifier and transportation notes C19 and C20, must be followed. The contract falls under NAICS Code 332510 and is managed by the Department of Defense’s Maritime Supply Chain ESOC Buys office with point of contact Audrey Acuna.

General Info

Single ventilator, NSN 2040-01-369-6999, due August 4, 2026, FOB origin, no quantity variance, strict packaging and mercury rules.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

BLDG 1265, VIRGINIA BEACH, VA, 23459, US

Set-Aside

NONE

Documents

(1)

SPE7M0-26-T-036M.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Audrey Acuna
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VENTILATOR,AIR CIRC
VENTILATOR,AIR CIRC
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
USE OF OZONE DEPLETING SUBSTANCES:
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SPIRAL METALS CORPORATION OF BATON 53146 P/N ML-89 ITEM 03000
SPIRAL METALS CORPORATION OF BATON 53146 P/N SMC-103 ML89 ITEM 03000
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017722161 0001 EA 1.000
NSN/MATERIAL:2040013696999
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE7M0-26-T-036M
SECTION B
PR: 7017722161 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
V4365A
MESG TWO
2465 GUADALCANAL RD STE 14
BLDG 1265
VIRGINIA BEACH VA 23459
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
V4365A
MESG TWO
1320 BARNSTABLE COUNTY ROAD
BLDG 3090
VIRGINIA BEACH VA 23459
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) V4365A62099C30
RDD: 777
PROJ: LP5 TP 1
SUPP ADD: YDC16 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A4A DIST: 3B ADV: FC: ZR
Need Ship Date:00/00/0000 Original Required Delivery Date:08/04/2026
SPE7M0-26-T-036M NSN/Part Number: 2040-01-369-6999 Quantity: 1 EA Purchase Request: 7017722161QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
NAIL
Solicitation # SPE4A6-26-T-14SZ
The contract specifies the procurement of 4 pounds of nails identified by NSN 5315-00-616-0359 under solicitation SPE4A6-26-T-14SZ, with a required delivery date of August 4, 2026, and a 20-day delivery window. The product must conform to ASTM F1667-05 and be packaged in accordance with ASTM D3951, subject to the higher precedence of the DLA Master List of Technical and Quality Requirements. All packaging and labeling must comply with MIL-STD-129, and palletization must follow DLA’s RP001 packaging standards. Sampling and inspection protocols require adherence to MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise stated, with critical, major, and minor attributes assigned specific verification levels or AQLs. Inspection and acceptance occur at the destination, and the item must be shipped via traceable freight, explicitly prohibiting parcel post. The delivery destination is Cannon AFB, New Mexico, with a unit price of $4.00 per pound, zero variance allowed in quantity, and FOB origin terms. The contract mandates compliance with all federal procurement standards and includes specific identification and tracking requirements, including a government-use-only code and designated point of contact for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADLESS
Solicitation # SPE4A6-26-T-14SW
The contract pertains to the procurement of three straight headless pins with part number 5315012138959 under solicitation SPE4A6-26-T-14SW, issued by the DLA Commodities Division of the Department of Defense for delivery to the Government of Israel, Ministry of Defense. The items must comply with DLA packaging requirements as defined in RP001 and technical quality standards referenced through R numbers from the DLA Master List, with sampling methods governed by MIL-STD-1916 or ASQ Z1.4 using zero-defect acceptance unless otherwise stated. Critical attributes require verification at Level VII or an AQL of 0.1, while unspecified attributes are treated as major. The pins are designated as a critical application item for Hamilton Sundstrand Corporation, and all packaging must conform to MIL-STD-2073-1E with packing code Q and level B, marking per MIL-STD-129 with no special marking requirements. Delivery is FOB origin within 20 days, with no variance allowed in quantity and inspection and acceptance occurring at origin. The unit of issue is each, with a total price of $3.00 per unit. The shipment is to be handled by G&B Packing Company and directed to the specified Israeli Ministry of Defense address under project 533 TP 2, with required delivery set for July 21, 2026.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
LATCH GUIDE, SNAPSLI
Solicitation # SPE4A6-26-T-14SG
The contract pertains to the procurement of one LATCH GUIDE, SNAPSLI, identified by NSN 5325-01-632-1658 and part number 593-6960614, under solicitation SPE4A6-26-T-14SG. Delivery is required within 20 days to the USS OMAHA (LCS 12) at FPO AP 96694, with FOB destination terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. The item is designated as a critical application and is subject to stringent quality and technical requirements incorporated by reference from the DLA Master List, including sampling procedures aligned with MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stipulated. The contractor must ensure no intentional introduction of mercury or mercury compounds into the product or its packaging, except for permitted exceptions such as functional uses in specified batteries or instruments, and all preservation methods must be mercury-free. Transportation must use traceable means, avoiding parcel post, and ship via RDD 777 using the designated vendor shipment method. The item has no shelf life limitation, and the contract enforces tailored quality requirements applicable to both manufacturers and non-manufacturers, with inspection and acceptance performed at origin unless overridden by the contract terms. All technical specifications, including the drawing revision K dated 05/14/1999, are binding and must be strictly followed.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STOP, TRACK
Solicitation # SPE7L1-26-T-947Y
This contract under solicitation SPE7L1-26-T-947Y requires the delivery of eight units of item NSN 5340-01-698-0256, identified as SIKORSKY AIRCRAFT CORPORATION P/N 78204-02557-108, at a unit price of $8.00 for a total value of $64.00. Delivery is due within 20 days of contract award with FOB origin terms and zero variance allowed in quantity. All items must comply strictly with DLA’s Master List of Technical and Quality Requirements, which override any conflicting specifications, and must be marked in accordance with MIL-STD-130N for military property identification. Packaging must adhere to MIL-STD-129 labeling and RP001 DLA packaging standards, with hazardous materials regulated by TQ requirement IP025 per FED-STD-313 and non-hazardous items conforming to ASTM D3951, unless superseded by DLA requirements. The use of Class I ozone-depleting chemicals is explicitly prohibited, and any substitute chemicals require prior approval unless already authorized by specification. Shipment must be made via the fastest traceable freight method and not parcel post, addressed to Davis Monthan AFB, Arizona, with the RDD code 777 and designated freight contact information. The required delivery date is August 6, 2026, and the items are subject to inspection and acceptance at destination.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-T-948A
The contract pertains to the procurement of three mounting brackets identified by NSN 5340-01-714-5611 under solicitation SPE7L1-26-T-948A, with a required delivery within five days of award. The item is governed by strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and the cited source-controlled drawing must be fully complied with; only approved sources listed on the drawing are initially recognized, though additional qualified sources may exist. Offerors seeking future qualification must contact the cognizant design activity specified on the drawing. Cybersecurity compliance is mandated at CMMC Level 2 for third-party assessors, and the contract enforces prohibitions on ozone-depleting chemicals, requiring approval for any substitute chemicals. Export control provisions under ITAR or EAR apply to associated technical data, with access restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and questionnaire, and have received explicit approval from DLA. All technical data handling must adhere to DFARS 252.225-7048, including restrictions on disclosure to foreign persons regardless of location. Government identification must be removed from non-accepted supplies, and configuration changes require formal engineering change proposals or variance requests. The solicitation issued on August 10, 2026, with responses due by August 21, 2026, is managed by the Department of Defense’s Land Supply Chain through the DLA, with performance location in Suffolk, Virginia, and primary point of contact provided.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
HASP, HINGED
Solicitation # SPE7L1-26-T-949E
The contract pertains to the procurement of a hinged hasp, identified by part number D114709-1 and NSN 5340013446285, with a total quantity of seven units to be delivered within 45 days from the order date, with delivery terms set at FOB origin. The item is subject to stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, which take precedence over any standard such as ASTM D3951. Packaging must conform to MIL-STD-129 for marking and labeling, and when not hazardous per FED-STD-313, must comply with commercial packaging standards in alignment with MIL-STD-129 and DLA packaging guidelines. Inspection and acceptance occur at the destination, with zero non-conformances required in sampling unless otherwise specified, and sampling must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan with assigned verification levels or AQLs for critical, major, and minor attributes. A Certificate of Quality Compliance, including mill-material certification, must accompany each shipment and be forwarded to the designated DLA Contracting Officer. Configuration changes require an Engineering Change Proposal or variance request, and the part must be manufactured in accordance with Revision D drawings dated March 1991 and March 1993. The unit of issue is each, priced at $7.00 per unit, with no quantity variance permitted. The solicitation number is SPE7L1-26-T-949E, issued under full and open competition, and the delivery must be completed by October 11, 2026, with an original ship date of October 6, 2026. All shipments must be delivered to the specified DLA Distribution facility in New Cumberland, Pennsylvania.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
STUD, FRICTION CATCH
Solicitation # SPE7L1-26-T-949S
The contract is for the procurement of two friction catch studs, part number P101-447-495, supplied exclusively by Tinnerman Products Inc. of Cleveland, Ohio, under NSN 5340-00-292-3214. The item is designated for critical aerospace applications and must comply with technical and quality requirements referenced from the DLA Master List, including strict prohibitions on ozone-depleting chemicals and mandatory approval of substitute chemicals. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans with zero non-conformances required unless otherwise specified, and all attributes are assigned verification levels or AQLs consistent with critical, major, or minor classifications. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 with no special markings, and hazardous materials handling guidelines apply. Delivery is FOB origin within five days, with inspection and acceptance occurring at destination, and no quantity variance is permitted. Shipping is prohibited via parcel post and must use traceable freight methods to the designated Tinker AFB location. The contract includes mandatory government use identifiers, specific project and shipment codes, and requires compliance with covered defense information protocols. The solicitation was issued under DLA with a response deadline of August 21, 2026, and the required delivery date is August 7, 2026.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
MOUNT, RESILIENT, GEN
Solicitation # SPE7M4-26-T-328L
The contract specifies the procurement of 29 units of a resilient general mount, identified by NSN 5340-01-088-3143, under solicitation SPE7M4-26-T-328L, with a response deadline of August 21, 2026, and a required delivery within 115 days after award. The acquisition is structured as a total small business set-aside under NAICS code 332510, managed by the Department of Defense’s Fluid Handling Division, with performance located in New Cumberland, Pennsylvania. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. Export control restrictions apply to associated technical data under ITAR or EAR, prohibiting disclosure or transfer to foreign persons without prior authorization, and only contractors with JCP certification, completed DLA training, and approved status may access such data. DFARS 252.225-7048 governs the handling of controlled technical information, and requirements for removal of government identification from non-accepted supplies are also in effect. The primary point of contact is Blake Tushar, reachable via email and phone provided in the contract data.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PLUG ASSEMBLY, SEALI
Solicitation # SPE7L1-26-T-949P
The contract is for a plug assembly, sealing, identified by NSN 5340-01-041-2290, with a quantity of 104 units required under purchase request 7016270977. Delivery must be completed within 45 days of award. The solicitation is issued under number SPE7L1-26-T-949P, with a response deadline of August 21, 2026, and was posted on August 10, 2026. This is a total small business set-aside under FAR 19.5, classified under NAICS code 332510, and managed by the Land Supply Chain under the Department of Defense. The place of performance is New Cumberland, Pennsylvania, with a zip code of 17070-5002. The primary point of contact is Keara Totten, reachable via email and phone provided. Compliance with DLA Packaging Requirements for Procurement is mandated, and all technical and quality specifications referenced by R or I numbers must be obtained from the DLA Master List of Technical and Quality Requirements. For this simplified acquisition, the version of the master list in effect on the solicitation issue date or award date governs. Additionally, government identification must be removed from any non-accepted supplies, per requirement RQ011.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7M4-26-T-328W
The contract is for the procurement of 54 mounting brackets with NSN/Part Number 5340-01-482-3968 under solicitation SPE7M4-26-T-328W, issued by the Defense Logistics Agency’s Fluid Handling Division. The delivery must be completed within 164 days after award, and full and open competition applies without set-aside restrictions. The contract incorporates technical and quality requirements from the DLA Master List, with compliance based on the revision in effect at the solicitation or award date depending on acquisition size. Contractors are required to comply with DLA packaging standards and must remove all government identification from non-accepted supplies. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be submitted for approval unless explicitly authorized by specification. The item is subject to export control under ITAR or EAR regulations, and technical data associated with it may not be disclosed to foreign persons, including foreign nationals within the United States, without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs the handling of this data, and only contractors with approved US/Canada Joint Certification Program status, completed training on DOD export-controlled data handling, and approved by DLA may access the information. The contract also enforces Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements for third-party assessment organizations. The place of performance is Hill AFB, Utah, and inquiries should be directed to Blake Tushar at the provided contact information.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CHOCK, ADJUSTABLE, UN
Solicitation # SPE7L1-26-T-948M
This contract is for the procurement of 24 adjustable chocks, identified by NSN 5340-01-585-9581 and part number 3034663, under solicitation SPE7L1-26-T-948M. Delivery is required within 20 days of award, with FOB origin terms, and inspection and acceptance occur at the destination. The entire quantity must be delivered with zero variance, and packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes. The items must be palletized according to DLA standards and shipped by the fastest traceable means—parcel post is prohibited. The delivery address is the Norfolk, Virginia facility operated by the Department of Defense, and the contract explicitly prohibits the use of Class I ozone-depleting chemicals, superseding any conflicting specification language. The supplier must comply with cybersecurity maturity requirements at CMMC Level 2 through a self-assessment and must remove all government identification from non-accepted supplies. Technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List, with the applicable revision determined by the solicitation or award date. The unit of issue is each (EA), priced at $24.00 per unit, totaling $576.00. The contracting office is the Land Supply Chain under the Department of Defense, with Kristina Derry listed as the primary point of contact. The contract is issued under a federal procurement vehicle and applies to a covered defense information environment. The original required delivery date is August 4, 2026, and the solicitation response deadline is August 21, 2026.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADLE
Solicitation # SPE4A6-26-T-14SV
The contract pertains to the procurement of 30 straight, headless pins with part number 5315-01-213-8959 and NSN 5315012138959 under solicitation SPE4A6-26-T-14SV, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 20 days of contract award, with shipment originating from the supplier’s facility under FOB origin terms and no tolerance for quantity variance. The items must be packaged in strict compliance with MIL-STD-2073-1E, using packaging code Q at level B, with marking adhering to MIL-STD-129 and no special marking codes applied. Quality assurance requires sampling per MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances accepted unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II corresponding to critical, major, and minor defects. All technical and quality requirements referenced by R or I numbers, including those for source approval documentation and removal of government identification from non-accepted items, are governed by the DLA Master List of Technical and Quality Requirements. The end destination is the Government of Israel, Ministry of Defense, with freight handled by G&B Packing Company and a required delivery date of June 25, 2026. The unit price is $30.00 per ea, totaling $900.00, and the contract uses the DoD authorized unit of issue as defined in official DLA documentation.
ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 326122
New
DIBBS
NIPPLE, PIPE
Solicitation # SPE7M0-26-T-035R
The contract pertains to the procurement of a nipple, pipe with NSN 4730-01-699-1505 and part number 2006-250, supplied by MERIT BRASS CO, with a quantity of three units required. Delivery is mandated within five days of award, with shipment originating FOB origin using the fastest traceable means—parcel post is explicitly prohibited. The delivery destination is the Sierra Army Depot in Herlong, California, and both inspection and acceptance occur at the destination. Packaging must fully comply with ASTM D3951 and MIL-STD-129 labeling requirements, and palletization must adhere to DLA’s packaging standards as outlined in RP001, with all technical and quality requirements from the DLA Master List taking precedence. The use of Class I ozone-depleting chemicals is strictly forbidden, and any substitutes require prior approval unless explicitly permitted by the specification. The unit of issue is each, with no variance permitted in quantity. The required delivery date is August 7, 2026, and the contract number is SPE7M0-26-T-035R. All labeling, marking, and documentation must include the government-identified ship-to and freight-to addresses, and the contract is governed by federal acquisition protocols under the Department of Defense.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY SET, N
Solicitation # SPE7M0-26-T-036E
The contract pertains to the procurement of one hose assembly set, identified by NSN 4720015795653 and part number 2464432, with a unit price of $1.00 and a total value of $1.00, requiring delivery within five days of order issuance. All items must be shipped FOB origin with zero variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951, but any conflicting requirements in the DLA Master List of Technical and Quality Requirements take precedence. Labels and markings must follow MIL-STD-129, and palletization must adhere to DLA’s RP001 packaging standards. The item must be shipped via traceable freight methods, excluding parcel post, to the designated delivery point at Fort Knox, Kentucky. The shipment must be identified with the military freight designation W90N15 and the military freight control number W90N1562160026, with project code TP1 and supplier addendum W809JG. The required delivery date is August 7, 2026, and the solicitation was issued under contract number SPE7M0-26-T-036E, with response deadline August 21, 2026. The contracting office is the Department of Defense, Maritime Supply Chain ESOC Buys, and the point of contact is Abaigael Masterson.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
TUBING, NONMETALLIC
Solicitation # SPE7M0-26-T-036G
This contract is for the procurement of nonmetallic tubing with the NSN 4710-01-662-6917 and part number 1060-03-04, issued under solicitation SPE7M0-26-T-036G. The requirement is for one unit to be delivered within five days of award, with FOB origin terms and no variance allowed in quantity. All items must be packaged and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, including specific packaging codes, materials, and methods, with palletization following DLA packaging standards. The tubing is classified as a Type I (Code F) item with a non-extendable shelf life of six months as specified by RS008 and RS001, and the use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements. Substitute chemicals require prior approval unless explicitly authorized. The item must be shipped by traceable means, excluding parcel post, to the designated delivery point in Collegeville, Pennsylvania, with all markings and documentation conforming to government requirements. The required delivery date is August 7, 2026, and the contract incorporates technical and quality standards from the DLA Master List, with the applicable revision controlled by the solicitation issue date.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
VANE, PUMP, ROTARY
Solicitation # SPE7M0-26-T-036R
The contract pertains to the procurement of 40 rotary vane pumps with part number 973352 and NSN 4320-01-734-1887, issued under solicitation SPE7M0-26-T-036R by the Department of Defense through the Maritime Supply Chain ESOc Buys office. Delivery is required within five days of award, with shipment FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking requirements, including specific internal and external packaging codes. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. The item must be shipped via the fastest traceable means, excluding parcel post, to the designated delivery point in Corpus Christi, Texas, with all markings and logistical instructions strictly adhered to. The contract specifies a unit price of $40.00 per item, resulting in a total price of $1,600.00, and includes a required delivery date of July 7, 2026, with the solicitation posted on August 10, 2026, and responses due by August 21, 2026. Palletization must conform to DLA packaging requirements, and special marking codes indicate no additional requirements beyond standard compliance. The point of contact is Grace Beck, with primary communication handled through her email and phone. The NAICS code 333912 classifies this as a pump and pumping equipment manufacturing procurement, and all supply chain logistics, including freight and delivery instructions, are directed to the U.S. Department facility in Corpus Christi under government control codes and identifiers. The item is intended for government use only with specific internal processing data and freight forwarding details applied.
Air and Gas Compressor Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
TUBING, NONMETALLIC
Solicitation # SPE7M0-26-T-035U
This contract specifies the procurement of nonmetallic tubing identified by NSN 4710-01-662-6862 and part number 1051F-21-06, with a single unit quantity required to be delivered within five days of order placement. The item is classified as a critical application item and must comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials must be pre-approved unless explicitly authorized by the governing specifications. A Type I (Code V) non-extendable shelf life applies, with exact durability periods defined in the procurement documentation. Packaging must adhere to ASTM D3951 unless overridden by higher-priority DLA standards, and all items must be marked and labeled in accordance with MIL-STD-129. Palletization must meet DLA Packaging Requirements, and the unit of issue is one ea. The tubing must be shipped FOB origin via traceable freight methods, explicitly excluding parcel post, to the designated delivery point in Collegeville, Pennsylvania, under a RDD/WMCS shipment designation. The item is to be inspected and accepted at the destination, with no quantity variance permitted. The contract number SPE7M0-26-T-035U governs this solicitation, issued by the Department of Defense under MARITIME SUPPLY CHAIN ESOC BUYS, with a required delivery date of August 7, 2026.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M0-26-T-036B
This contract is for the procurement of two hose assemblies, nonmetallic, identified by NSN 4720-01-580-2654 and part number 1677640 from Caterpillar Inc, under solicitation SPE7M0-26-T-036B. The total quantity is two units, each to be delivered FOB origin within five days of award, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 as supplemented by the DLA Master List of Technical and Quality Requirements, which takes precedence. Packaging and labeling must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization specified accordingly. The unit of issue is each, and the required delivery date is August 7, 2026. Delivery is to be made to Fort Buchanan, Puerto Rico, with a designated shipping address and mark-for point under the DLA Logistics Command. Transportation instructions reference DLAD Proc Notes C19 and C20, and the shipment requires a RDD/NMCS protocol. The contract specifies that government identification must be removed from non-accepted supplies, and all documentation aligns with DLA’s authorized unit of issue guidelines. The primary point of contact is Abaigael Masterson, and the solicitation response deadline is August 21, 2026.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER BUSHING
Solicitation # SPE7M0-26-T-036P
The contract mandates the supply of nine Adapter Bushings, identified by NSN 4730-01-340-9517 and part number B2SS, under solicitation SPE7M0-26-T-036P, with delivery required within five days of award at FOB origin. All items must comply strictly with the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, including ASTM D3951 packaging standards, and must be marked and labeled per MIL-STD-129. The use of Class I ozone-depleting chemicals is explicitly prohibited, and any substitute materials require prior approval unless already authorized by specification. Packaging must adhere to DLA’s RP001 packaging requirements and be palletized accordingly, with a unit of issue of EA and quantity per unit pack specified as 001. Shipments must be sent by the fastest traceable means, excluding parcel post, and delivered to W81AAX at 81 Barnum Road, Devens MA 01434-3505. Inspection and acceptance occur at destination, with zero variance permitted in quantity. The required delivery date is August 6, 2026, and contract compliance is enforced through detailed government tracking identifiers including IPD, DIC, and TCN codes.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M0-26-T-036N
The contract specifies the procurement of an electrical connector receptacle with part number 10-087324-02P, manufactured by AMPHENOL CORP, and identified by NSN 5935-00-543-8642. A quantity of 20 units is required, to be delivered within five days to the designated DLA depot in Texarkana, Texas, with delivery terms FOB origin and no variance allowed in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards, and must meet the detailed drawing specifications referenced under revision numbers and part piece numbers, including NR 18876 and 9072720. Use of any Class I ozone-depleting substances in manufacturing or processing is strictly prohibited unless explicitly approved in writing by the contracting officer, and this restriction overrides all other specification requirements unless the item is classified as a commercial item under FAR 11.001 or a part-numbered-only item. Packaging must adhere to DLA Packaging Requirements for Procurement (RP001) and MIL-STD-129 for marking and labeling, with commercial packaging following ASTM D3951 only if the item is non-hazardous per FED-STD-313; otherwise, TQ requirement IP025 applies. Palletization must conform to RP001, and all packaging must clearly indicate the unit of issue and quantity per unit pack as defined. Shipment must occur via the fastest traceable means, excluding parcel post, and the delivery point is a specific DLA logistics location. The solicitation number SPE7M0-26-T-036N is active with a response deadline in August 2026, and the required delivery date is July 16, 2026. Point of contact for inquiries is Gerard Quinn, and the item falls under NAICS code 334417 with the Department of Defense as the procuring agency.
Electronic Connector Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 334310
New
DIBBS
HANDSET
Solicitation # SPE7M0-26-T-035Y
The contract is for one handheld device identified by NSN 5965016794037 and part number WS-2626-13SN from Pearl Communications Industries LLC, classified as a commercial off-the-shelf item. The delivery must be completed within five days of order placement, with shipment originating from the supplier and delivered FOB origin to the Carrier Outfitting Material Support Center in Suffolk, Virginia. The item is subject to strict packaging standards per MIL-STD-2073-1E and MIL-STD-129 labeling requirements, with no special marking needed. Packaging must comply with DLA’s procurement guidelines and be palletized accordingly, and parcel post is explicitly prohibited—shipment must occur via the fastest traceable means. The item must not contain ozone-depleting chemicals or intentionally added mercury, except for functional uses in batteries, lamps, instruments, or sensors as permitted under NAVSEA specifications, with portable mercury-containing devices requiring shockproof construction and secondary containment. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and all technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract. The required delivery date is August 7, 2026, and the solicitation closes on August 21, 2026, with performance under the contract number SPE7M0-26-T-035Y. The sole point of contact for inquiries is Audrey Acuna of the Department of Defense.
Audio and Video Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
DIBBS
ELBOW, PIPE
Solicitation # SPE7M0-26-T-036D
The contract is for the procurement of two elbow pipe components with NSN 4730-01-615-5854 under solicitation SPE7M0-26-T-036D, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Delivery is required within five days of award, with shipment to be made FOB origin and inspection and acceptance occurring at the destination. The delivery address is the Fleet Readiness Center Aviation Support Equipment in Solomons, Maryland, and shipping must be completed via the fastest traceable means, explicitly prohibiting parcel post. The quantity is fixed with zero variance allowed, and the unit price is set at $2.00 per unit for a total contract value of $4.00. All packaging must comply with ASTM D3951 and fully adhere to MIL-STD-129 labeling standards, with palletization following DLA Packaging Requirement RP001. The DLA Master List of Technical and Quality Requirements supersedes any conflicting ASTM standards and governs all technical and quality aspects. The item is identified by purchase request 7017799966 and must be delivered by the original required delivery date of August 7, 2026. Government use codes and shipping identifiers are specified for internal tracking only.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 334412
New
DIBBS
METER, NOISE LEVEL
Solicitation # SPE7M0-26-T-035N
The contract pertains to the procurement of one unit of a noise level meter with NSN 6625-01-432-3333, to be delivered within five days of award under solicitation SPE7M0-26-T-035N. Delivery must be FOB origin with zero variance allowed in quantity and inspection and acceptance occurring at the destination. The item must comply with DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and must be palletized per DLA packaging requirements. The product is classified as non-hazardous but must not contain intentional mercury or mercury compounds except in specified exemptions such as functional components in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents approved by NAVSEA; portable devices containing mercury must include shockproof design and a secondary containment boundary per NAVSEA 5100-003D. The supplier must ensure batteries, if present, meet the RQ035 provision and ship the item by the fastest traceable means—parcel post is prohibited—with delivery addressed to the Carrier Outfitting Matl Support Center in Suffolk, Virginia. The contract incorporates technical and quality requirements referenced from the DLA Master List, and the unit of issue is EA as designated by DoD standards. The required delivery date is August 7, 2026, and the solicitation was posted on August 10, 2026, with responses due by August 21, 2026. All contractual obligations are governed by the DLA Master revisions in effect on the solicitation issue date.
Bare Printed Circuit Board Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
STRAINER ELEMENT, SEDIM
Solicitation # SPE7M0-26-T-035W
The contract pertains to the procurement of one sediment strainer element with NSN 4730-01-123-1534 and part number 08008-1, issued under solicitation SPE7M0-26-T-035W. Delivery is required within five days FOB origin with no quantity variance permitted, and inspection and acceptance occur at the point of origin. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific material and marking requirements, and bags must be fabricated to MIL-B-117 standards. The item is designated as a critical application item, subject to stringent technical and quality controls referenced from the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are strictly prohibited unless functionally essential and explicitly authorized, with additional containment requirements for portable devices. Class I ozone-depleting chemicals are banned, and any substitute chemicals require prior approval. The supplier must provide a Certificate of Conformance unless waived by a Quality Assurance Letter of Instruction. The item must be shipped by the fastest traceable means, explicitly excluding parcel post, to the designated government facility in Suffolk, Virginia, with a delivery deadline of August 7, 2026. The contract enforces full and open competition with no set-aside restrictions. All packaging, palletization, and marking follow DLA and military standards, including the use of specific preservation methods and container types. The contract documentation incorporates technical specifications by reference and mandates compliance with DoD unit of issue standards. Government use fields indicate tracking and logistics codes for internal handling, and the solicitation was posted for response until August 21, 2026, under the authority of the Department of Defense's Maritime Supply Chain ESOB.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 11 days
View Details