Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

CONNECTOR, RECEPTACL

Active
SPE7M0-26-T-036NFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of an electrical connector receptacle with part number 10-087324-02P, manufactured by AMPHENOL CORP, and identified by NSN 5935-00-543-8642. A quantity of 20 units is required, to be delivered within five days to the designated DLA depot in Texarkana, Texas, with delivery terms FOB origin and no variance allowed in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards, and must meet the detailed drawing specifications referenced under revision numbers and part piece numbers, including NR 18876 and 9072720. Use of any Class I ozone-depleting substances in manufacturing or processing is strictly prohibited unless explicitly approved in writing by the contracting officer, and this restriction overrides all other specification requirements unless the item is classified as a commercial item under FAR 11.001 or a part-numbered-only item. Packaging must adhere to DLA Packaging Requirements for Procurement (RP001) and MIL-STD-129 for marking and labeling, with commercial packaging following ASTM D3951 only if the item is non-hazardous per FED-STD-313; otherwise, TQ requirement IP025 applies. Palletization must conform to RP001, and all packaging must clearly indicate the unit of issue and quantity per unit pack as defined. Shipment must occur via the fastest traceable means, excluding parcel post, and the delivery point is a specific DLA logistics location. The solicitation number SPE7M0-26-T-036N is active with a response deadline in August 2026, and the required delivery date is July 16, 2026. Point of contact for inquiries is Gerard Quinn, and the item falls under NAICS code 334417 with the Department of Defense as the procuring agency.

General Info

20 AMPHENOL connector receptacles, NSN 5935-00-543-8642, FOB origin, deliver by July 16, 2026, DLA Texarkana, no quantity variance.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

334417 - Electronic Connector ManufacturingView NAICS

Place of Performance

7TH STREET H AVENUE, TEXARKANA, TX, 75507-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M0-26-T-036N for DLA Maritime Supply Chain ESOC Buys

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
Contacts
Gerard Quinn
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CONNECTOR,RECEPTACL
CONNECTOR,RECEPTACLE,ELECTRICAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THE TECHNICAL DATA CITED IN THIS SOLICITATION IS
NOT COMPLETE, HOWEVER, THE ITEM PROVIDED MUST
MEET THE REQUIREMENTS OF THE CITED TECHNICAL
DATA IN ADDITION TO THE REQUIREMENTS OF THE
PART NUMBERED ITEM LISTED ON THIS SOLICITATION.
DETAILED DRAWING
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
AMPHENOL CORP 77820 P/N 10-087324-02P
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 18876 9170385 REVISION NR C DTD 02/04/1963 PART PIECE NUMBER: 9072720
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 18876 9072720 REVISION NR B DTD 02/01/1960 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%
SPE7M0-26-T-036N
SECTION B
PR: 7017801231 PRLI: 0001 CONT’D
2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017801231 0001 EA 20.000
NSN/MATERIAL:5935005438642
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W45G18
W0MC STK REC ACCT DEPOT REDRVR
DLA LMP ZONE 1 BLDG 552 NORTH
7TH STREET H AVENUE
TEXARKANA TX 75507-5000
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W45G18
W0MC STK REC ACCT DEPOT REDRVR
DLA LMP ZONE 1 BLDG 552 NORTH
7TH STREET H AVENUE
TEXARKANA TX 75507-5000
US
MARKFOR
W45G18
W0MC STK REC ACCT DEPOT REDRVR
DLA LMP ZONE 1 BLDG 552 NORTH
7TH STREET H AVENUE
SPE7M0-26-T-036N
SECTION B
PR: 7017801231 PRLI: 0001 CONT’D
TEXARKANA TX 75507-5000
US
M/F: (TCN) W45G18619400BN
RDD:
PROJ: D63 TP 1
SUPP ADD: W45G18 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: ADV: 2L FC: VH
Need Ship Date:00/00/0000 Original Required Delivery Date:07/16/2026
SPE7M0-26-T-036N NSN/Part Number: 5935-00-543-8642 Quantity: 20 EA Purchase Request: 7017801231QTY: 20 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334417
New
DIBBS
ADAPTER, CONNECTOR
Solicitation # SPE7M5-26-Q-0862
The item is an adapter and connector with the NSN 5935-01-261-5598, requiring five units to be delivered within 60 days of award under solicitation SPE7M5-26-Q-0862. Technical data associated with this item is subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons, including those within the United States, requires prior authorization from the Department of State or Commerce. Access to this controlled data is strictly limited to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory training on handling DoD export-controlled technical data, and have passed the DLA Export-Controlled Technical Data Questionnaire. Compliance with DFARS 252.225-7048 is required, and this applies to all entities, including U.S. companies and their foreign subsidiaries. The solicitation was posted on August 10, 2026, with responses due by August 25, 2026, and the place of performance is New Cumberland, Pennsylvania, 17070-5002. The primary point of contact is Barbara Hoffmann of the Department of Defense, Active Devices Division, reachable via email and phone provided.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M5-26-T-400P
The contract specifies the procurement of an electrical plug connector, identified by part number CTV06RQW-25-17P and NSN 5935-01-679-3747, with a quantity of two units. Delivery is required within 20 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, prioritizing R-series and I-series specifications over general standards like ASTM D3951. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 DLA packaging requirements. If the item is hazardous per FED-STD-313, it must be packaged according to TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 applies, subject to DLA requirements. The item must be shipped via the fastest traceable means, prohibited from parcel post, with delivery directed to ASD Norfolk Supply Department in Norfolk, Virginia. The contract reference is SPE7M5-26-T-400P, with a required delivery date of August 6, 2026, and the solicitation was posted on August 10, 2026, with a response deadline of August 21, 2026. The unit of issue is each, priced at $2.00 per unit, totaling $4.00. Government use codes and contact information for Margaret Smith at DLA are included for administrative tracking.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
DUMMY CONNECTOR, PLU
Solicitation # SPE7M5-26-Q-0854
The contract is for the procurement of 113 units of a DUMMY CONNECTOR, PLUG with NSN 5935-01-568-0679 under solicitation SPE7M5-26-Q-0854, issued as a Total Small Business Set-Aside. The solicitation was posted on August 10, 2026, with a response deadline of August 25, 2026, and requires delivery within 339 days of award. The item is subject to strict technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, and physical identification and marking of the item must comply with specified standards. Cybersecurity compliance requires certification at CMMC Level 2 through an approved third-party assessment organization. Export control regulations under ITAR or EAR apply to associated technical data, restricting disclosure to foreign persons even within the United States, and contractors must hold valid US/Canada Joint Certification Program certification, complete required DOD export control training, and receive DLA approval to access this data. The place of performance is New Cumberland, PA, 17070-5002, and the contracting activity is the Department of Defense’s Active Devices Division. All technical data is governed by DFARS 252.225-7048, and government identification must be removed from non-accepted supplies. The NAICS code is 334417 and the primary point of contact is Barbara Hoffmann.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
DIBBS
ADAPTER, CONNECTOR
Solicitation # SPE7M5-26-T-400K
The contract is for one adapter connector with NSN 5935-01-699-5052 and part number 10078001, issued under solicitation SPE7M5-26-T-400K by the Department of Defense’s Active Devices Division. Delivery is required within 20 days FOB origin, with no quantity variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and no cushioning, while marking follows MIL-STD-129 without special codes. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on procurement type and amendment dates. Packaging and palletization adhere to DLA’s procurement standards, and the item must be delivered to Aegis Guam System at Andersen Air Force Base, Guam, with a secondary parcel post address for FPO use. The required delivery date is August 4, 2026, and transportation logistics are governed by DLAD procedural notes C19 and C20. The contract includes government-only identifiers and is managed by point of contact Margaret Smith with contact information provided.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICA
Solicitation # SPE7M5-26-Q-0856
The item is a backsheath for an electrical connector identified by NSN 5935-01-661-2764 and part number M85049/1819N05, compliant with SAE AS85049/18E Revision E dated 04/01/2019 and SAE AS85049 Revision F dated 04/01/2021. It is a qualified item listed on the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts, subject to procurement note H01. The item must be manufactured without any Class I ozone-depleting substances unless written approval is obtained from the contracting officer, and this restriction overrides all other specification requirements while maintaining performance standards. Packaging must adhere to MIL-STD-2073-1E with packaging method 31, dry climate control, and packaging material code 00, with marking in accordance with MIL-STD-129 and no special marking codes. Palletization follows DLA packaging requirements, and shipments are destined for the DLA Distribution facility in New Cumberland, Pennsylvania. The contract is issued under solicitation SPE7M5-26-Q-0856 with a firm fixed price, no variance allowed in quantity, and delivery required within 112 days after award. Inspection and acceptance occur at the destination. The unit of issue is each, with a total quantity of 14 units. The item falls under NAICS code 334417 and is procured by the Department of Defense’s Active Devices Division. The delivery target date is February 21, 2027, and the purchase request number is 7017696101. The point of contact is Barbara Hoffmann, and all materials must be shipped via the designated DLA distribution center. The contract applies simplified acquisition procedures, and revisions to the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date govern compliance unless later amended.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICA
Solicitation # SPE7M5-26-Q-0860
The contract is for 14 units of a backshell, electrical, identified by NSN 5935-01-244-6487, with a firm fixed price and no variance allowed in quantity. Delivery is required within 143 days after award, with shipment originating from the supplier and acceptance occurring at the destination. The item must comply with stringent technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements, including specific performance criteria for qualified products under QPL for connector assemblies and contacts. Manufacturing processes are strictly prohibited from using Class I ozone-depleting substances unless expressly approved in writing by the contracting officer, and this restriction overrides any conflicting spec requirements but does not reduce performance obligations. The item must be manufactured in accordance with SAE-AS85049C and MIL-C-85049A specifications, with exact part numbers M85049/33-1-08 and M85049/33-1-8. All packaging must adhere to MIL-STD-129 labeling and RP001 DLA packaging requirements, using commercial packaging per ASTM D3951 unless the material is hazardous, in which case FED-STD-313 mandates specialized packaging. DLA’s master requirements supersede ASTM standards. Palletization, marking, and labeling must fully comply with DLA specifications, and the shipment must be sent to the designated DLA Distribution facility in New Cumberland, Pennsylvania. The contract supports full and open competition and is governed by federal acquisition regulations, with inspection and acceptance occurring upon arrival at the delivery point.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
DIBBS
JACK, TELEPHONE
Solicitation # SPE7M5-26-T-400U
The contract pertains to the procurement of a JACK, TELEPHONE item with NSN 5935008336320, requiring a quantity of 200 units to be delivered within 320 days under solicitation SPE7M5-26-T-400U. Delivery is FOB destination, with no quantity variance allowed, and inspection and acceptance occur at origin. Packaging must comply with MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking required. The item is subject to strict materials restrictions: no Class I ozone-depleting substances may be used in any phase of production without explicit written approval from the contracting officer, and mercury or mercury-containing compounds are prohibited except in specific functional applications such as batteries, fluorescent lights, sensors, or weapons systems, which must include secondary containment as per NAVSEA guidelines. The contract mandates full and open competition and classifies the item as critical application. Technical and quality requirements are governed by referenced military specifications MIL-DTL-641G and MIL-DTL-641/14D, incorporated via the DLA Master List of Technical and Quality Requirements. A separate first article test line item is included with one unit designated for testing, priced at $1.00, though no separate charge is assumed if not cited, and the test requirement is governed by FAR clauses 52.209-3 or 52.209-4. The item must be shipped via traceable means using the designated DLA vendor code and shipment identifier RDD 777, and all shipments must avoid parcel post. The delivery destination is the USS COMSTOCK LSD 45, FPO AP 96662, with the original required delivery date set for August 6, 2026.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
BRACKET, ELECTRICAL
Solicitation # SPE7M5-26-Q-0857
The contract is for a single electrical bracket with NSN 5935-01-664-4142 under solicitation SPE7M5-26-Q-0857, requiring delivery within 90 days of award. The item is governed by technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date due to its classified simplified acquisition status. Packaging, configuration management, export control, and item identification compliance are mandatory, including adherence to DLA packaging rules, removal of government markings from rejected items, and physical marking of the bare part. Technical data associated with this item is subject to ITAR or EAR export controls, restricting disclosure to foreign nationals even within the United States, and access is limited to contractors with approved US/Canada Joint Certification Program status, completed DLA training, and authorized clearance. The place of performance is Starke, Florida, with Barbara Hoffmann of the Department of Defense’s Active Devices Division serving as the primary point of contact, and the NAICS code 334417 applies to this procurement under federal acquisition rules.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICAL C
Solicitation # SPE7M5-26-Q-0859
The contract specifies the procurement of 594 units of a backsheel for an electrical connector, identified by NSN 5935-01-436-3788 and part number M85049/84-14W02, compliant with SAE AS85049 Revision F dated April 1, 2021, and conforming to Technical Data Package Revision C Generation 3. This is a qualified item requiring adherence to the Qualified Products List (QPL) for Federal Stock Class 5935 connector assemblies and contacts, as outlined in procurement note H01. The item must be manufactured without any Class I ozone-depleting substances in any phase of its production unless explicit written approval from the contracting officer is obtained, with this restriction overriding all other specification demands but not reducing performance criteria. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise directed, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract is firm fixed price with zero variance allowed in quantity and requires delivery to the destination point within 115 days after the award date. Packaging must comply with DLA’s overarching requirements: hazardous materials follow FED-STD-313 and TQ requirement IP025, while non-hazardous items are to be commercially packaged per ASTM D3951 unless superseded by DLA Master List requirements, and all packaging must be marked and labeled per MIL-STD-129 with palletization in accordance with RP001. Delivery is FOB origin with inspection and acceptance occurring at destination, and all materials must be shipped to the designated DLA distribution facility in New Cumberland, Pennsylvania. The contract was issued under solicitation SPE7M5-26-Q-0859 with a response deadline of August 25, 2026, and the material is needed no later than March 3, 2027.
ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR BODY, RECEPTA
Solicitation # SPE7M0-26-Q-1167
The contract pertains to the procurement of one electrical receptacle connector body with NSN 5935-01-276-0619 and part number 482-13F20-41P3(904) from AMPHENOL CANADA CORP, under solicitation SPE7M0-26-Q-1167. Delivery is required within five days after award, with firm fixed pricing and no tolerance for quantity variance. The item must comply with all applicable DLA Master List of Technical and Quality Requirements, identified by R and I numbers, which override any conflicting industry standards such as ASTM D3951. Packaging and labeling must adhere to MIL-STD-129 and DLA Packaging Requirements RP001, with hazardous materials handled per FED-STD-313 and TQ requirement IP025. The use of ozone-depleting substances in any manufacturing or processing step is strictly prohibited unless written approval from the contracting officer is obtained, and this restriction supersedes all other specification requirements except those related to product performance. Inspection and acceptance occur at the destination, with sampling mandated under MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise specified. Critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively, and all packaging must be palletized per RP001. Shipments must not use parcel post and must be sent via the fastest traceable means to the specified FPO address. The item is intended for government use with a material need date of June 30, 2026, and must be procured in compliance with all applicable Department of Defense procedures and unit of issue standards.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334417
New
SLED
Bus Interface Unit (BIU)
Solicitation # 601290000034662
The Texas Department of Transportation is soliciting proposals for Bus Interface Units (BIUs) to support operations at its Seguin Regional Distribution Center. The solicitation, numbered 601290000034662, was posted on August 10, 2026, with responses due by August 24, 2026, at 9:00 PM Central Time. All submissions must be received by this deadline; no late responses will be accepted. This is a state-level procurement under the SLED classification, with no specific set-aside or NAICS code designated. The place of performance is in Texas, and all relevant updates, including addendums, questions, answers, or modifications, will be posted exclusively on the solicitation’s official website, which bidders are responsible for monitoring regularly. The primary point of contact for questions and correspondence is Sandi Pincock, reachable via email at Sandi.Pincock@txdot.gov or by phone at 903-510-9231. Proposals must be submitted through the official portal linked in the solicitation.
Texas Department of Transportation

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
Federal
SOLE SOURCE – ELECTRICAL CONNECTORS
Solicitation # N0016426Q0280
The U.S. Navy’s Naval Surface Warfare Center Crane is seeking to procure four specific types of non-commercial electrical connectors under a sole source contract for use in the MK-99 Fire Control Systems Radar, specifically within the Gyro Block Assembly. The required items include ten each of two female straight pin connectors (DEP45K-9928JT3 and DEP45K-38-129JT3), ten male straight pin connectors (DEP45P-9244-169JT6), and twenty female sold cup and hood assembly connectors (DEP45K-5-972H1JT3). These connectors are critical to maintaining the radar’s target lock functionality while the ship is in motion. The sole source for these components is Armel De LLC, doing business as Armel Electronics, LLC, due to its unique historical role in co-developing the original Navy drawing 10001-3161082 and being the only qualified supplier to meet all certification and technical requirements. Attempting to duplicate the qualification process with another vendor would exceed $750,000 in cost and require over 120 weeks, making competition impractical under simplified acquisition procedures per FAR 13.101(b). The solicitation is issued as a Firm Fixed Price Request for Quotes with a closing date of August 17, 2026, at 11:00 PM Eastern Time, and all offers must be submitted via email to the designated government point of contact. Vendors must be currently registered in the System for Award Management (SAM) and the Joint Certification Program to access controlled attachments, and must actively monitor SAM.gov for any amendments prior to the deadline. Although any responsible source may submit a capability statement, the Government retains full discretion to proceed with the sole source award based on the unique technical and qualification factors tied to the original equipment manufacturer. No set-aside or small business preference applies, and the North American Industry Classification System code is 334417. The contract will be managed under Department of Defense procedures with Crane, Indiana, as the place of performance.
Nswc Crane

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 326122
New
DIBBS
NIPPLE, PIPE
Solicitation # SPE7M0-26-T-035R
The contract pertains to the procurement of a nipple, pipe with NSN 4730-01-699-1505 and part number 2006-250, supplied by MERIT BRASS CO, with a quantity of three units required. Delivery is mandated within five days of award, with shipment originating FOB origin using the fastest traceable means—parcel post is explicitly prohibited. The delivery destination is the Sierra Army Depot in Herlong, California, and both inspection and acceptance occur at the destination. Packaging must fully comply with ASTM D3951 and MIL-STD-129 labeling requirements, and palletization must adhere to DLA’s packaging standards as outlined in RP001, with all technical and quality requirements from the DLA Master List taking precedence. The use of Class I ozone-depleting chemicals is strictly forbidden, and any substitutes require prior approval unless explicitly permitted by the specification. The unit of issue is each, with no variance permitted in quantity. The required delivery date is August 7, 2026, and the contract number is SPE7M0-26-T-035R. All labeling, marking, and documentation must include the government-identified ship-to and freight-to addresses, and the contract is governed by federal acquisition protocols under the Department of Defense.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY SET, N
Solicitation # SPE7M0-26-T-036E
The contract pertains to the procurement of one hose assembly set, identified by NSN 4720015795653 and part number 2464432, with a unit price of $1.00 and a total value of $1.00, requiring delivery within five days of order issuance. All items must be shipped FOB origin with zero variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951, but any conflicting requirements in the DLA Master List of Technical and Quality Requirements take precedence. Labels and markings must follow MIL-STD-129, and palletization must adhere to DLA’s RP001 packaging standards. The item must be shipped via traceable freight methods, excluding parcel post, to the designated delivery point at Fort Knox, Kentucky. The shipment must be identified with the military freight designation W90N15 and the military freight control number W90N1562160026, with project code TP1 and supplier addendum W809JG. The required delivery date is August 7, 2026, and the solicitation was issued under contract number SPE7M0-26-T-036E, with response deadline August 21, 2026. The contracting office is the Department of Defense, Maritime Supply Chain ESOC Buys, and the point of contact is Abaigael Masterson.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
TUBING, NONMETALLIC
Solicitation # SPE7M0-26-T-036G
This contract is for the procurement of nonmetallic tubing with the NSN 4710-01-662-6917 and part number 1060-03-04, issued under solicitation SPE7M0-26-T-036G. The requirement is for one unit to be delivered within five days of award, with FOB origin terms and no variance allowed in quantity. All items must be packaged and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, including specific packaging codes, materials, and methods, with palletization following DLA packaging standards. The tubing is classified as a Type I (Code F) item with a non-extendable shelf life of six months as specified by RS008 and RS001, and the use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements. Substitute chemicals require prior approval unless explicitly authorized. The item must be shipped by traceable means, excluding parcel post, to the designated delivery point in Collegeville, Pennsylvania, with all markings and documentation conforming to government requirements. The required delivery date is August 7, 2026, and the contract incorporates technical and quality standards from the DLA Master List, with the applicable revision controlled by the solicitation issue date.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
VENTILATOR, AIR CIRC
Solicitation # SPE7M0-26-T-036M
The contract is for a single unit of a ventilator, air circ, identified by NSN 2040-01-369-6999 and part number ML-89, supplied by Spiral Metals Corporation of Baton with purchase request 7017722161. Delivery is required within five days of contract award, with goods to be shipped FOB origin and no tolerance for quantity variance. All items must be packaged in compliance with ASTM D3951, but any conflicting requirements from the DLA Master List of Technical and Quality Requirements take precedence. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001: DLA Packaging Requirements for Procurement. The use of mercury or mercury-containing compounds is strictly prohibited unless explicitly exempted for functional components such as batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, with portable mercury-containing devices requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. Shipment must be made by the fastest traceable means, prohibited from parcel post, and directed to the designated freight shipping address in Virginia Beach. The required delivery date is August 4, 2026, with a solicitation response deadline of August 21, 2026. Inspection and acceptance occur at the destination, and all government-specific identifiers and shipping instructions, including the DLA procurement identifier and transportation notes C19 and C20, must be followed. The contract falls under NAICS Code 332510 and is managed by the Department of Defense’s Maritime Supply Chain ESOC Buys office with point of contact Audrey Acuna.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
VANE, PUMP, ROTARY
Solicitation # SPE7M0-26-T-036R
The contract pertains to the procurement of 40 rotary vane pumps with part number 973352 and NSN 4320-01-734-1887, issued under solicitation SPE7M0-26-T-036R by the Department of Defense through the Maritime Supply Chain ESOc Buys office. Delivery is required within five days of award, with shipment FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking requirements, including specific internal and external packaging codes. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. The item must be shipped via the fastest traceable means, excluding parcel post, to the designated delivery point in Corpus Christi, Texas, with all markings and logistical instructions strictly adhered to. The contract specifies a unit price of $40.00 per item, resulting in a total price of $1,600.00, and includes a required delivery date of July 7, 2026, with the solicitation posted on August 10, 2026, and responses due by August 21, 2026. Palletization must conform to DLA packaging requirements, and special marking codes indicate no additional requirements beyond standard compliance. The point of contact is Grace Beck, with primary communication handled through her email and phone. The NAICS code 333912 classifies this as a pump and pumping equipment manufacturing procurement, and all supply chain logistics, including freight and delivery instructions, are directed to the U.S. Department facility in Corpus Christi under government control codes and identifiers. The item is intended for government use only with specific internal processing data and freight forwarding details applied.
Air and Gas Compressor Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
TUBING, NONMETALLIC
Solicitation # SPE7M0-26-T-035U
This contract specifies the procurement of nonmetallic tubing identified by NSN 4710-01-662-6862 and part number 1051F-21-06, with a single unit quantity required to be delivered within five days of order placement. The item is classified as a critical application item and must comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials must be pre-approved unless explicitly authorized by the governing specifications. A Type I (Code V) non-extendable shelf life applies, with exact durability periods defined in the procurement documentation. Packaging must adhere to ASTM D3951 unless overridden by higher-priority DLA standards, and all items must be marked and labeled in accordance with MIL-STD-129. Palletization must meet DLA Packaging Requirements, and the unit of issue is one ea. The tubing must be shipped FOB origin via traceable freight methods, explicitly excluding parcel post, to the designated delivery point in Collegeville, Pennsylvania, under a RDD/WMCS shipment designation. The item is to be inspected and accepted at the destination, with no quantity variance permitted. The contract number SPE7M0-26-T-035U governs this solicitation, issued by the Department of Defense under MARITIME SUPPLY CHAIN ESOC BUYS, with a required delivery date of August 7, 2026.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M0-26-T-036B
This contract is for the procurement of two hose assemblies, nonmetallic, identified by NSN 4720-01-580-2654 and part number 1677640 from Caterpillar Inc, under solicitation SPE7M0-26-T-036B. The total quantity is two units, each to be delivered FOB origin within five days of award, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 as supplemented by the DLA Master List of Technical and Quality Requirements, which takes precedence. Packaging and labeling must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization specified accordingly. The unit of issue is each, and the required delivery date is August 7, 2026. Delivery is to be made to Fort Buchanan, Puerto Rico, with a designated shipping address and mark-for point under the DLA Logistics Command. Transportation instructions reference DLAD Proc Notes C19 and C20, and the shipment requires a RDD/NMCS protocol. The contract specifies that government identification must be removed from non-accepted supplies, and all documentation aligns with DLA’s authorized unit of issue guidelines. The primary point of contact is Abaigael Masterson, and the solicitation response deadline is August 21, 2026.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER BUSHING
Solicitation # SPE7M0-26-T-036P
The contract mandates the supply of nine Adapter Bushings, identified by NSN 4730-01-340-9517 and part number B2SS, under solicitation SPE7M0-26-T-036P, with delivery required within five days of award at FOB origin. All items must comply strictly with the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, including ASTM D3951 packaging standards, and must be marked and labeled per MIL-STD-129. The use of Class I ozone-depleting chemicals is explicitly prohibited, and any substitute materials require prior approval unless already authorized by specification. Packaging must adhere to DLA’s RP001 packaging requirements and be palletized accordingly, with a unit of issue of EA and quantity per unit pack specified as 001. Shipments must be sent by the fastest traceable means, excluding parcel post, and delivered to W81AAX at 81 Barnum Road, Devens MA 01434-3505. Inspection and acceptance occur at destination, with zero variance permitted in quantity. The required delivery date is August 6, 2026, and contract compliance is enforced through detailed government tracking identifiers including IPD, DIC, and TCN codes.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334310
New
DIBBS
HANDSET
Solicitation # SPE7M0-26-T-035Y
The contract is for one handheld device identified by NSN 5965016794037 and part number WS-2626-13SN from Pearl Communications Industries LLC, classified as a commercial off-the-shelf item. The delivery must be completed within five days of order placement, with shipment originating from the supplier and delivered FOB origin to the Carrier Outfitting Material Support Center in Suffolk, Virginia. The item is subject to strict packaging standards per MIL-STD-2073-1E and MIL-STD-129 labeling requirements, with no special marking needed. Packaging must comply with DLA’s procurement guidelines and be palletized accordingly, and parcel post is explicitly prohibited—shipment must occur via the fastest traceable means. The item must not contain ozone-depleting chemicals or intentionally added mercury, except for functional uses in batteries, lamps, instruments, or sensors as permitted under NAVSEA specifications, with portable mercury-containing devices requiring shockproof construction and secondary containment. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and all technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract. The required delivery date is August 7, 2026, and the solicitation closes on August 21, 2026, with performance under the contract number SPE7M0-26-T-035Y. The sole point of contact for inquiries is Audrey Acuna of the Department of Defense.
Audio and Video Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
DIBBS
ELBOW, PIPE
Solicitation # SPE7M0-26-T-036D
The contract is for the procurement of two elbow pipe components with NSN 4730-01-615-5854 under solicitation SPE7M0-26-T-036D, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Delivery is required within five days of award, with shipment to be made FOB origin and inspection and acceptance occurring at the destination. The delivery address is the Fleet Readiness Center Aviation Support Equipment in Solomons, Maryland, and shipping must be completed via the fastest traceable means, explicitly prohibiting parcel post. The quantity is fixed with zero variance allowed, and the unit price is set at $2.00 per unit for a total contract value of $4.00. All packaging must comply with ASTM D3951 and fully adhere to MIL-STD-129 labeling standards, with palletization following DLA Packaging Requirement RP001. The DLA Master List of Technical and Quality Requirements supersedes any conflicting ASTM standards and governs all technical and quality aspects. The item is identified by purchase request 7017799966 and must be delivered by the original required delivery date of August 7, 2026. Government use codes and shipping identifiers are specified for internal tracking only.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334412
New
DIBBS
METER, NOISE LEVEL
Solicitation # SPE7M0-26-T-035N
The contract pertains to the procurement of one unit of a noise level meter with NSN 6625-01-432-3333, to be delivered within five days of award under solicitation SPE7M0-26-T-035N. Delivery must be FOB origin with zero variance allowed in quantity and inspection and acceptance occurring at the destination. The item must comply with DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and must be palletized per DLA packaging requirements. The product is classified as non-hazardous but must not contain intentional mercury or mercury compounds except in specified exemptions such as functional components in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents approved by NAVSEA; portable devices containing mercury must include shockproof design and a secondary containment boundary per NAVSEA 5100-003D. The supplier must ensure batteries, if present, meet the RQ035 provision and ship the item by the fastest traceable means—parcel post is prohibited—with delivery addressed to the Carrier Outfitting Matl Support Center in Suffolk, Virginia. The contract incorporates technical and quality requirements referenced from the DLA Master List, and the unit of issue is EA as designated by DoD standards. The required delivery date is August 7, 2026, and the solicitation was posted on August 10, 2026, with responses due by August 21, 2026. All contractual obligations are governed by the DLA Master revisions in effect on the solicitation issue date.
Bare Printed Circuit Board Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
STRAINER ELEMENT, SEDIM
Solicitation # SPE7M0-26-T-035W
The contract pertains to the procurement of one sediment strainer element with NSN 4730-01-123-1534 and part number 08008-1, issued under solicitation SPE7M0-26-T-035W. Delivery is required within five days FOB origin with no quantity variance permitted, and inspection and acceptance occur at the point of origin. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific material and marking requirements, and bags must be fabricated to MIL-B-117 standards. The item is designated as a critical application item, subject to stringent technical and quality controls referenced from the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are strictly prohibited unless functionally essential and explicitly authorized, with additional containment requirements for portable devices. Class I ozone-depleting chemicals are banned, and any substitute chemicals require prior approval. The supplier must provide a Certificate of Conformance unless waived by a Quality Assurance Letter of Instruction. The item must be shipped by the fastest traceable means, explicitly excluding parcel post, to the designated government facility in Suffolk, Virginia, with a delivery deadline of August 7, 2026. The contract enforces full and open competition with no set-aside restrictions. All packaging, palletization, and marking follow DLA and military standards, including the use of specific preservation methods and container types. The contract documentation incorporates technical specifications by reference and mandates compliance with DoD unit of issue standards. Government use fields indicate tracking and logistics codes for internal handling, and the solicitation was posted for response until August 21, 2026, under the authority of the Department of Defense's Maritime Supply Chain ESOB.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details