Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

STRAINER ELEMENT, SEDIM

Active
SPE7M0-26-T-035WFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one sediment strainer element with NSN 4730-01-123-1534 and part number 08008-1, issued under solicitation SPE7M0-26-T-035W. Delivery is required within five days FOB origin with no quantity variance permitted, and inspection and acceptance occur at the point of origin. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific material and marking requirements, and bags must be fabricated to MIL-B-117 standards. The item is designated as a critical application item, subject to stringent technical and quality controls referenced from the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are strictly prohibited unless functionally essential and explicitly authorized, with additional containment requirements for portable devices. Class I ozone-depleting chemicals are banned, and any substitute chemicals require prior approval. The supplier must provide a Certificate of Conformance unless waived by a Quality Assurance Letter of Instruction. The item must be shipped by the fastest traceable means, explicitly excluding parcel post, to the designated government facility in Suffolk, Virginia, with a delivery deadline of August 7, 2026. The contract enforces full and open competition with no set-aside restrictions. All packaging, palletization, and marking follow DLA and military standards, including the use of specific preservation methods and container types. The contract documentation incorporates technical specifications by reference and mandates compliance with DoD unit of issue standards. Government use fields indicate tracking and logistics codes for internal handling, and the solicitation was posted for response until August 21, 2026, under the authority of the Department of Defense's Maritime Supply Chain ESOB.

General Info

Procure one sediment strainer element, deliver by August 7, 2026, FOB origin, per strict military packaging and quality standards.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

6701 COLLEGE DRIVE, DOORWAY 71, SUFFOLK, VA, 23435-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M0-26-T-035W DLA Land and Maritime Maritime Supply Chain ESOC Buys

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
ContactsNo contacts available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUS
ContactsNo contact information available

Full Description

Show more
STRAINER ELEMENT,SEDIMENT
STRAINER ELEMENT, SEDIMENT.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,
UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
FULL AND OPEN COMPETITION APPLIES.
CRITICAL APPLICATION ITEM
SPE7M0-26-T-035W
SECTION B
TDP Rev A Gen 1 IAW BASIC DRAWING NR 16236 08008 REVISION NR B DTD 05/29/2009 PART PIECE NUMBER: 08008-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017799900 0001 EA 1.000
NSN/MATERIAL:4730011231534
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:32 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:JA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BAGS SHALL BE FABRICATED FROM TYPE 1, 2, OR 3, CLASS B, STYLE 1, OR TYPE 1 OR 2, CLASS C,STYLE 1, I/A/W MIL-B-117"
PARCEL POST ADDRESS:
N48253
CARRIER OUTFITTING MATL SUPPORT CTR
6701 COLLEGE DRIVE, DOORWAY 71
SUFFOLK VA 23435-5000
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N48253
CARRIER OUTFITTING MATL SUPPORT CTR
6701 COLLEGE DRIVE, DOORWAY 71
SPE7M0-26-T-035W
SECTION B
PR: 7017799900 PRLI: 0001 CONT’D
SUFFOLK VA 23435-5000
US
M/F: (TCN) N2184761531308
RDD: 777
PROJ: ZS0 TP 1
SUPP ADD: N48253 SIG: L
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A4A DIST: V9B ADV: 2L FC: V7
Need Ship Date:00/00/0000 Original Required Delivery Date:08/07/2026
SPE7M0-26-T-035W NSN/Part Number: 4730-01-123-1534 Quantity: 1 EA Purchase Request: 7017799900QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332996
New
DIBBS
SWIVEL JOINT, HYDRAULIC
Solicitation # SPE7M3-26-T-8155
A hydraulic swivel joint made of steel with a zinc plating and dichromate finish, or alternatively a clear trivalent chromate finish, is being procured under a total small business set-aside solicitation. The part features 3/4-16 37-degree SAE flare connections on both ends and measures 3.06 inches overall in length, with a specific part number assigned by Grove U.S. LLC and Oshkosh Defense LLC as approved sources. This is a critical application item requiring government engineering source approval and is subject to stringent technical and quality requirements referenced from the DLA Master List. The item is identified by NSN 4730-01-199-4583 and must be delivered in full compliance with MIL-STD-2073-1E packaging standards, including specific methods for preservation, wrapping, and containerization, with marking conforming to MIL-STD-129 and no special marking codes applied. The contract calls for 303 units to be delivered FOB origin within 163 days, with zero tolerance for quantity variance. Inspection and acceptance occur at destination, and the shipment must be sent to the designated DLA Distribution facility in New Cumberland, Pennsylvania. The delivery is scheduled for February 1, 2027, with an original required delivery date of February 2, 2027, under solicitation SPE7M3-26-T-8155, and the unit price is $303.00 per each, totaling a contract value of $91,809.00.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
COUPLING HALF, QUICK
Solicitation # SPE7M3-26-T-8157
The contract is for 280 units of a 3/8 inch quick disconnect coupling half, specified by NSN 4730-01-412-5272 and referenced to a technical drawing titled "COUPLING HALF, QUICK DISCONNECT." All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Export control restrictions apply to technical data associated with this item under either ITAR or EAR, requiring prior authorization from the Department of State or Commerce for any disclosure to foreign persons, including those within the United States. Access to this controlled data is restricted to DLA contractors with active US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and approval from the DLA controlling authority. The solicitation, issued under number SPE7M3-26-T-8157 on August 10, 2026, with a response deadline of August 21, 2026, is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 332996. Performance is required at New Cumberland, Pennsylvania, 17070-5002, with a delivery window of 105 days after award. The primary point of contact is William Cain from the Fluid Handling Division, Department of Defense, reachable via email and phone. The procurement is managed through the DLA’s electronic procurement portal, and all contractors must comply with DFARS 252.225-7048 regarding export control of technical data.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
PLUG, QUICK DISCONNE
Solicitation # SPE7M3-26-T-8158
This contract pertains to a commercial quick disconnect plug identified by part number 155-39-12D, manufactured by SATAIR A/S and also available from Eaton Aeroquip LLC and Jaidinger Mfg Co Inc, designed for use on F/A-18 Hornet and S-3A Viking aircraft. The item is constructed from aluminum alloy with an external thread and includes a chain, and it is classified as a critical application item with destination inspection and acceptance points. Packaging must comply with MIL-STD-2073-1E, including heat-sealed barrier bags for cleanliness, and marking must adhere to MIL-STD-129 with special marking code 24 indicating open inspection or use. Packaging is subject to DLA’s Reduced Plastic Packaging Initiative, requiring minimal plastic use without compromising protection. The item is procured under solicitation SPE7M3-26-T-8158, a Women-Owned Small Business Set-Aside, with a required delivery of 312 units within 125 days of award, delivered FOB origin. The NSN is 4730-01-394-3297, and the unit of issue is each. Delivery must be made to DLA Distribution Jacksonville at the specified address, with freight details governed by DLA procedures C19 and C20. The original required delivery date is January 4, 2027, with a need ship date of December 25, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and pricing is set at $312.00 per unit for a total contract value of $97,344.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER BUSHING
Solicitation # SPE7M0-26-T-036P
The contract mandates the supply of nine Adapter Bushings, identified by NSN 4730-01-340-9517 and part number B2SS, under solicitation SPE7M0-26-T-036P, with delivery required within five days of award at FOB origin. All items must comply strictly with the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, including ASTM D3951 packaging standards, and must be marked and labeled per MIL-STD-129. The use of Class I ozone-depleting chemicals is explicitly prohibited, and any substitute materials require prior approval unless already authorized by specification. Packaging must adhere to DLA’s RP001 packaging requirements and be palletized accordingly, with a unit of issue of EA and quantity per unit pack specified as 001. Shipments must be sent by the fastest traceable means, excluding parcel post, and delivered to W81AAX at 81 Barnum Road, Devens MA 01434-3505. Inspection and acceptance occur at destination, with zero variance permitted in quantity. The required delivery date is August 6, 2026, and contract compliance is enforced through detailed government tracking identifiers including IPD, DIC, and TCN codes.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
CLAMP, HOSE
Solicitation # SPE7M3-26-T-8154
The contract is for 147 hundred-unit lots of a spring-type hose clamp, nominal effective size of 1-3/8 inches, identified by NSN 4730-00-585-8582 and part number AA52506-E-22, with full and open competition required. The item must comply with the technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and all manufacturing and inspection must follow MIL-STD-1916 or an equivalent zero-based sampling plan with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively or AQLs of 0.1, 1.0, and 4.0. The product must not contain or come into direct contact with mercury or mercury-containing compounds except for specific exemptions such as functional uses in batteries, fluorescent lights, sensors, or instrumentations approved by NAVSEA, and any portable fluorescent lamps or instruments containing mercury must be shock-proof with a secondary containment boundary per NAVSEA 5100-003D. Class I ozone-depleting chemicals are strictly prohibited, and replacements require prior approval unless explicitly authorized. The clamp must conform to SAE J1508-2009 and the DLA-approved specification revision E dated 03/31/2023, with configuration changes requiring formal engineering change proposals or variance requests. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 with the U pack code and no special marking, and palletization must meet DLA procurement requirements. The unit of issue is an HD of 100 units, with delivery due 101 days after award, FOB origin, inspection and acceptance at destination. The full shipment must be delivered to the DDSP New Cumberland Facility in Pennsylvania with a required ship date of December 1, 2026, and an original delivery deadline of December 12, 2026.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
NUT ASSEMBLY, TUBE C
Solicitation # SPE7M3-26-T-8156
The contract is for the procurement of 210 units of NUT ASSEMBLY, TUBE C, identified by NSN 4730-00-102-2672 and purchase request number 7016692371, under solicitation SPE7M3-26-T-8156. The item is classified as a critical application item with strict compliance requirements governed by the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging and labeling must adhere to MIL-STD-129 and the DLA Packaging Requirements for Procurement, including palletization as specified in RP001. The unit of issue is each, with no variance permitted in quantity. Delivery is required FOB origin, with inspection and acceptance occurring at the destination, and delivery must be completed within 73 days of contract award. The required delivery date is November 8, 2026, with a need ship date of November 3, 2026. The item may be sourced from approved suppliers including HYDRAFLOW, LKR INC, and TRANSDIGM INC, each with their respective part numbers. All packaging must be marked and prepared for shipment to the specified DLA Distribution facility at Robins AFB, Georgia, and transportation logistics must comply with DLAD Proc Notes C19 and C20. The solicitation is set aside exclusively for Women-Owned Small Businesses under NAICS code 332996, with contract management and inquiries directed to William Cain at the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE4A5-26-T-338B
The contract is for a single unit of a metal tube assembly, part number 68A691949-1001, with NSN 4710014480994, supplied to the U.S. Department of Defense under solicitation SPE4A5-26-T-338B. Delivery is required within five days to Robins Air Force Base, Georgia, with FOB origin terms and no quantity variance allowed. Inspection and acceptance occur at the destination. The item is designated as a critical application, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA-specific packaging guidelines, and the use of parcel post is strictly prohibited. All shipments must be sent via the fastest traceable means. The manufacturer must meet non-tailored ISO 9001:2015 quality requirements and follow configuration change management and variance request protocols. Sampling adheres to MIL-STD-1916 or approved zero-based plans, with acceptance criteria requiring zero non-conformances unless otherwise specified. Unit identification is not required per the service customer's request. The contract includes specific documentation, packaging, labeling, and shipping instructions, with the point of contact being Annette Pruett. The original delivery date is August 3, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332996
New
DIBBS
RETAINER, COUPLING
Solicitation # SPE4A5-26-T-338G
The contract pertains to the procurement of a Retainer, Coupling, identified by part number 555-3115-501 and NSN 4730-01-559-0320, with a total quantity of 216 units to be delivered FOB origin within 405 days. The item is classified as a Commercial Off the Shelf (COTS) product, and while Item Unique Identification is not required, the supplier must comply with all applicable DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must meet DLA’s RP001 packaging requirements. The delivery destination is DLA Distribution Warner Robins at Robins Air Force Base, Georgia, with inspection and acceptance occurring at the destination. The supplier must also complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and comply with requirements for Covered Defense Information under RD002. The purchase request number is 7014383879, the unit price is $216.00 totaling $46,656, and the original required delivery date is October 26, 2027, with a needed ship date of May 3, 2026. The solicitation number is SPE4A5-26-T-338G, issued by the Department of Defense, with Cynthia Duval as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332996
New
DIBBS
REDUCER, TUBE
Solicitation # SPE7L5-26-T-4923
A nylon tube reducer sized at 3/8 inch by 1/4 inch is being procured under contract SPE7L5-26-T-4923 for use on airframe 26512 E/I aircraft applications, with the part number NY600-6-4 from Swagelok and GR550B6-4 from Northrop Grumman Systems Corporation. The item is identified by NSN 4730-01-041-7984 and requires strict adherence to DLA packaging and technical quality requirements, with the DLA Master List of Technical and Quality Requirements taking precedence over ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must follow RP001 specifications. The contract mandates a fixed quantity of 51 units with no variance allowed, to be delivered FOB origin within 12 days of contract award, with inspection and acceptance occurring at destination. The unit of issue is each, priced at $51.00 per unit, totaling $2601.00. Delivery must be completed by June 18, 2026, and shipments are to be sent to the DLA Distribution Facility at New Cumberland, Pennsylvania, using the provided parcel post and freight shipping addresses. All technical and quality criteria referenced via R or I numbers are governed by the DLA Master List version in effect on the solicitation issue date, and compliance with DoD unit of issue standards is required.
LAND SUPPLIER OPNS ENGINES

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
NUT, TUBE COUPLING
Solicitation # SPE7M4-26-T-328V
The contract specifies the procurement of a tube coupling made from 304 stainless steel, identified by NSN 4730009194651 and governed by specification SPE7M4-26-T-328V. It is classified as a commercial item and requires compliance with multiple technical and quality standards referenced through DLA’s Master List, including stringent material and manufacturing controls. The component must be sourced from manufacturers listed on the Performance Review Institute’s Qualified Manufacturers List or Qualified Products List, with all assemblies subjected to accreditation requirements. Thread classification is Class 3, and the item must strictly avoid intentional incorporation of mercury or mercury compounds, except in narrowly defined exceptions such as batteries, lamps, and specified instruments, which must include secondary containment per NAVSEA guidelines. Ozone-depleting chemicals are completely prohibited. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans with zero non-conformances required unless otherwise specified, and all items must conform to MIL-STD-129 marking and MIL-STD-2073-1E packaging standards. Palletization and packaging adhere to DLA’s RP001 requirements, with no variance permitted in delivered quantities. Delivery is mandated in three separate lots totaling 578 units, with FOB origin terms and inspection and acceptance occurring at the destination. The items are to be delivered to three DLA distribution centers in Jacksonville, FL; San Diego, CA; and Tinker AFB, OK, with shipment deadlines ranging from September 2026 to October 2027, though the overall required delivery date is February 27, 2027. Each shipment must include intermediate containers holding 100 units, marked in accordance with specified codes and packaged using approved materials and methods. The contract enforces documentation compliance for source approval, mandates adherence to SAE AS18280H and AS21921D technical data package revisions, and requires all substitutes to be pre-approved unless explicitly authorized. The unit of issue is each, priced at $3.00 per unit, with total contract value reflecting the aggregated quantities across all delivery points.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER, STRAIGHT, PI
Solicitation # SPE7M3-26-T-8163
The contract is for 286 straight pipe-to-hose adapters made of aluminum with an anodized finish, identified by NSN 4730-01-198-0571 and part of purchase request 7016484916. The item must comply with specific material standards, substituting ASTM B211 for QQ-A-225/7 and QQ-A-225/8, and ASTM B221 in place of QQ-A-200/8. The solicitation, numbered SPE7M3-26-T-8163, is a total small business set-aside under NAICS code 332996 and was posted on August 10, 2026, with responses due by August 21, 2026. Delivery is required within 59 days after delivery order issuance to Texarkana, Texas, with a primary point of contact at the Defense Logistics Agency’s Fluid Handling Division. The technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with revision controls tied to the solicitation or award date depending on acquisition size. Technical data associated with this item is subject to export control under ITAR or EAR, prohibiting disclosure to foreign persons without prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 applies. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and DLA authorization may access the controlled data.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
LOCKNUT, TUBE FITTING
Solicitation # SPE7M4-26-T-328K
This contract is for the procurement of locknuts for tube fittings, specifically steel components with a cadmium finish and a 0.375 inch outer diameter tube size, identified by NSN 4730002775084 and part number AS5179-06. The item is classified as a commercial item and a critical application component, requiring strict compliance with SAE AS5179D and AS4841 standards. Manufacturing and assembly must be performed exclusively by accredited entities listed on the Performance Review Institute’s Qualified Manufacturer List or Qualified Products List, accessible through EAUDITNET.COM. Thread specifications follow Class 3 standards, and the use of Class I ozone-depleting chemicals is strictly prohibited, with any substitutes needing prior approval. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 marking requirements, with palletization and handling governed by DLA’s RP001 procurement standards. The contract includes two line items for a total quantity of 106 units, with unit prices of $44 and $62 respectively, and delivery scheduled within 283 days from contract award to destinations at Robins Air Force Base, Georgia and Hill Air Force Base, Utah. Inspection and acceptance occur at the destination, with no quantity variance permitted. Delivery must occur no later than June 21, 2027, with required ship dates between May and June 2027. All transportation and logistics follow DLA procedural guidelines, and the item is procured under a federally issued solicitation with a response deadline of August 21, 2026.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 326122
New
DIBBS
NIPPLE, PIPE
Solicitation # SPE7M0-26-T-035R
The contract pertains to the procurement of a nipple, pipe with NSN 4730-01-699-1505 and part number 2006-250, supplied by MERIT BRASS CO, with a quantity of three units required. Delivery is mandated within five days of award, with shipment originating FOB origin using the fastest traceable means—parcel post is explicitly prohibited. The delivery destination is the Sierra Army Depot in Herlong, California, and both inspection and acceptance occur at the destination. Packaging must fully comply with ASTM D3951 and MIL-STD-129 labeling requirements, and palletization must adhere to DLA’s packaging standards as outlined in RP001, with all technical and quality requirements from the DLA Master List taking precedence. The use of Class I ozone-depleting chemicals is strictly forbidden, and any substitutes require prior approval unless explicitly permitted by the specification. The unit of issue is each, with no variance permitted in quantity. The required delivery date is August 7, 2026, and the contract number is SPE7M0-26-T-035R. All labeling, marking, and documentation must include the government-identified ship-to and freight-to addresses, and the contract is governed by federal acquisition protocols under the Department of Defense.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY SET, N
Solicitation # SPE7M0-26-T-036E
The contract pertains to the procurement of one hose assembly set, identified by NSN 4720015795653 and part number 2464432, with a unit price of $1.00 and a total value of $1.00, requiring delivery within five days of order issuance. All items must be shipped FOB origin with zero variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951, but any conflicting requirements in the DLA Master List of Technical and Quality Requirements take precedence. Labels and markings must follow MIL-STD-129, and palletization must adhere to DLA’s RP001 packaging standards. The item must be shipped via traceable freight methods, excluding parcel post, to the designated delivery point at Fort Knox, Kentucky. The shipment must be identified with the military freight designation W90N15 and the military freight control number W90N1562160026, with project code TP1 and supplier addendum W809JG. The required delivery date is August 7, 2026, and the solicitation was issued under contract number SPE7M0-26-T-036E, with response deadline August 21, 2026. The contracting office is the Department of Defense, Maritime Supply Chain ESOC Buys, and the point of contact is Abaigael Masterson.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
TUBING, NONMETALLIC
Solicitation # SPE7M0-26-T-036G
This contract is for the procurement of nonmetallic tubing with the NSN 4710-01-662-6917 and part number 1060-03-04, issued under solicitation SPE7M0-26-T-036G. The requirement is for one unit to be delivered within five days of award, with FOB origin terms and no variance allowed in quantity. All items must be packaged and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, including specific packaging codes, materials, and methods, with palletization following DLA packaging standards. The tubing is classified as a Type I (Code F) item with a non-extendable shelf life of six months as specified by RS008 and RS001, and the use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements. Substitute chemicals require prior approval unless explicitly authorized. The item must be shipped by traceable means, excluding parcel post, to the designated delivery point in Collegeville, Pennsylvania, with all markings and documentation conforming to government requirements. The required delivery date is August 7, 2026, and the contract incorporates technical and quality standards from the DLA Master List, with the applicable revision controlled by the solicitation issue date.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
VENTILATOR, AIR CIRC
Solicitation # SPE7M0-26-T-036M
The contract is for a single unit of a ventilator, air circ, identified by NSN 2040-01-369-6999 and part number ML-89, supplied by Spiral Metals Corporation of Baton with purchase request 7017722161. Delivery is required within five days of contract award, with goods to be shipped FOB origin and no tolerance for quantity variance. All items must be packaged in compliance with ASTM D3951, but any conflicting requirements from the DLA Master List of Technical and Quality Requirements take precedence. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001: DLA Packaging Requirements for Procurement. The use of mercury or mercury-containing compounds is strictly prohibited unless explicitly exempted for functional components such as batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, with portable mercury-containing devices requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. Shipment must be made by the fastest traceable means, prohibited from parcel post, and directed to the designated freight shipping address in Virginia Beach. The required delivery date is August 4, 2026, with a solicitation response deadline of August 21, 2026. Inspection and acceptance occur at the destination, and all government-specific identifiers and shipping instructions, including the DLA procurement identifier and transportation notes C19 and C20, must be followed. The contract falls under NAICS Code 332510 and is managed by the Department of Defense’s Maritime Supply Chain ESOC Buys office with point of contact Audrey Acuna.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333912
New
DIBBS
VANE, PUMP, ROTARY
Solicitation # SPE7M0-26-T-036R
The contract pertains to the procurement of 40 rotary vane pumps with part number 973352 and NSN 4320-01-734-1887, issued under solicitation SPE7M0-26-T-036R by the Department of Defense through the Maritime Supply Chain ESOc Buys office. Delivery is required within five days of award, with shipment FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking requirements, including specific internal and external packaging codes. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. The item must be shipped via the fastest traceable means, excluding parcel post, to the designated delivery point in Corpus Christi, Texas, with all markings and logistical instructions strictly adhered to. The contract specifies a unit price of $40.00 per item, resulting in a total price of $1,600.00, and includes a required delivery date of July 7, 2026, with the solicitation posted on August 10, 2026, and responses due by August 21, 2026. Palletization must conform to DLA packaging requirements, and special marking codes indicate no additional requirements beyond standard compliance. The point of contact is Grace Beck, with primary communication handled through her email and phone. The NAICS code 333912 classifies this as a pump and pumping equipment manufacturing procurement, and all supply chain logistics, including freight and delivery instructions, are directed to the U.S. Department facility in Corpus Christi under government control codes and identifiers. The item is intended for government use only with specific internal processing data and freight forwarding details applied.
Air and Gas Compressor Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
TUBING, NONMETALLIC
Solicitation # SPE7M0-26-T-035U
This contract specifies the procurement of nonmetallic tubing identified by NSN 4710-01-662-6862 and part number 1051F-21-06, with a single unit quantity required to be delivered within five days of order placement. The item is classified as a critical application item and must comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials must be pre-approved unless explicitly authorized by the governing specifications. A Type I (Code V) non-extendable shelf life applies, with exact durability periods defined in the procurement documentation. Packaging must adhere to ASTM D3951 unless overridden by higher-priority DLA standards, and all items must be marked and labeled in accordance with MIL-STD-129. Palletization must meet DLA Packaging Requirements, and the unit of issue is one ea. The tubing must be shipped FOB origin via traceable freight methods, explicitly excluding parcel post, to the designated delivery point in Collegeville, Pennsylvania, under a RDD/WMCS shipment designation. The item is to be inspected and accepted at the destination, with no quantity variance permitted. The contract number SPE7M0-26-T-035U governs this solicitation, issued by the Department of Defense under MARITIME SUPPLY CHAIN ESOC BUYS, with a required delivery date of August 7, 2026.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M0-26-T-036B
This contract is for the procurement of two hose assemblies, nonmetallic, identified by NSN 4720-01-580-2654 and part number 1677640 from Caterpillar Inc, under solicitation SPE7M0-26-T-036B. The total quantity is two units, each to be delivered FOB origin within five days of award, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 as supplemented by the DLA Master List of Technical and Quality Requirements, which takes precedence. Packaging and labeling must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization specified accordingly. The unit of issue is each, and the required delivery date is August 7, 2026. Delivery is to be made to Fort Buchanan, Puerto Rico, with a designated shipping address and mark-for point under the DLA Logistics Command. Transportation instructions reference DLAD Proc Notes C19 and C20, and the shipment requires a RDD/NMCS protocol. The contract specifies that government identification must be removed from non-accepted supplies, and all documentation aligns with DLA’s authorized unit of issue guidelines. The primary point of contact is Abaigael Masterson, and the solicitation response deadline is August 21, 2026.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M0-26-T-036N
The contract specifies the procurement of an electrical connector receptacle with part number 10-087324-02P, manufactured by AMPHENOL CORP, and identified by NSN 5935-00-543-8642. A quantity of 20 units is required, to be delivered within five days to the designated DLA depot in Texarkana, Texas, with delivery terms FOB origin and no variance allowed in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards, and must meet the detailed drawing specifications referenced under revision numbers and part piece numbers, including NR 18876 and 9072720. Use of any Class I ozone-depleting substances in manufacturing or processing is strictly prohibited unless explicitly approved in writing by the contracting officer, and this restriction overrides all other specification requirements unless the item is classified as a commercial item under FAR 11.001 or a part-numbered-only item. Packaging must adhere to DLA Packaging Requirements for Procurement (RP001) and MIL-STD-129 for marking and labeling, with commercial packaging following ASTM D3951 only if the item is non-hazardous per FED-STD-313; otherwise, TQ requirement IP025 applies. Palletization must conform to RP001, and all packaging must clearly indicate the unit of issue and quantity per unit pack as defined. Shipment must occur via the fastest traceable means, excluding parcel post, and the delivery point is a specific DLA logistics location. The solicitation number SPE7M0-26-T-036N is active with a response deadline in August 2026, and the required delivery date is July 16, 2026. Point of contact for inquiries is Gerard Quinn, and the item falls under NAICS code 334417 with the Department of Defense as the procuring agency.
Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334310
New
DIBBS
HANDSET
Solicitation # SPE7M0-26-T-035Y
The contract is for one handheld device identified by NSN 5965016794037 and part number WS-2626-13SN from Pearl Communications Industries LLC, classified as a commercial off-the-shelf item. The delivery must be completed within five days of order placement, with shipment originating from the supplier and delivered FOB origin to the Carrier Outfitting Material Support Center in Suffolk, Virginia. The item is subject to strict packaging standards per MIL-STD-2073-1E and MIL-STD-129 labeling requirements, with no special marking needed. Packaging must comply with DLA’s procurement guidelines and be palletized accordingly, and parcel post is explicitly prohibited—shipment must occur via the fastest traceable means. The item must not contain ozone-depleting chemicals or intentionally added mercury, except for functional uses in batteries, lamps, instruments, or sensors as permitted under NAVSEA specifications, with portable mercury-containing devices requiring shockproof construction and secondary containment. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and all technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract. The required delivery date is August 7, 2026, and the solicitation closes on August 21, 2026, with performance under the contract number SPE7M0-26-T-035Y. The sole point of contact for inquiries is Audrey Acuna of the Department of Defense.
Audio and Video Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
DIBBS
ELBOW, PIPE
Solicitation # SPE7M0-26-T-036D
The contract is for the procurement of two elbow pipe components with NSN 4730-01-615-5854 under solicitation SPE7M0-26-T-036D, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Delivery is required within five days of award, with shipment to be made FOB origin and inspection and acceptance occurring at the destination. The delivery address is the Fleet Readiness Center Aviation Support Equipment in Solomons, Maryland, and shipping must be completed via the fastest traceable means, explicitly prohibiting parcel post. The quantity is fixed with zero variance allowed, and the unit price is set at $2.00 per unit for a total contract value of $4.00. All packaging must comply with ASTM D3951 and fully adhere to MIL-STD-129 labeling standards, with palletization following DLA Packaging Requirement RP001. The DLA Master List of Technical and Quality Requirements supersedes any conflicting ASTM standards and governs all technical and quality aspects. The item is identified by purchase request 7017799966 and must be delivered by the original required delivery date of August 7, 2026. Government use codes and shipping identifiers are specified for internal tracking only.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334412
New
DIBBS
METER, NOISE LEVEL
Solicitation # SPE7M0-26-T-035N
The contract pertains to the procurement of one unit of a noise level meter with NSN 6625-01-432-3333, to be delivered within five days of award under solicitation SPE7M0-26-T-035N. Delivery must be FOB origin with zero variance allowed in quantity and inspection and acceptance occurring at the destination. The item must comply with DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and must be palletized per DLA packaging requirements. The product is classified as non-hazardous but must not contain intentional mercury or mercury compounds except in specified exemptions such as functional components in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents approved by NAVSEA; portable devices containing mercury must include shockproof design and a secondary containment boundary per NAVSEA 5100-003D. The supplier must ensure batteries, if present, meet the RQ035 provision and ship the item by the fastest traceable means—parcel post is prohibited—with delivery addressed to the Carrier Outfitting Matl Support Center in Suffolk, Virginia. The contract incorporates technical and quality requirements referenced from the DLA Master List, and the unit of issue is EA as designated by DoD standards. The required delivery date is August 7, 2026, and the solicitation was posted on August 10, 2026, with responses due by August 21, 2026. All contractual obligations are governed by the DLA Master revisions in effect on the solicitation issue date.
Bare Printed Circuit Board Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details