This Solicitation opportunity from Government of Canada was posted on February 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

W3508-260272 Weapon Storage Lockers

Closed

WS5507813370International

Submission Closed02/12/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7M1-26-T-332D

This solicitation from the Department of Defense Maritime Supply Chain is for the procurement of electrical wire under NSN 6145-01-695-9473. The requirement specifies a quantity of one foot with a delivery timeline of five days after receipt of order. The contract incorporates specific technical and quality requirements via the DLA Master List, including packaging standards and the removal of government identification from non-accepted supplies. A critical aspect of this procurement is the length requirement based on the Advice code. If the code is 2N, 28, or 34, the material must be provided in a single continuous length, as multiple unit packs are prohibited. If the code is 2P or 39, continuous length is required but multiple unit packs are acceptable. In the event of inconsistencies, the Advice code takes precedence over the schedule. Additionally, alternate offerors must provide a complete data package for both the approved and alternate parts.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-27TT

This contract is for the procurement of 19 hand reamers, identified by NSN 5110-01-376-3650 and part number DT-2615B for Sikorsky Aircraft Corporation. The solicitation, numbered SPE4A6-26-T-27TT, is issued by the Department of Defense ASC Commodities Division. Delivery is required within 171 days, with a need ship date of March 8, 2027, and an original required delivery date of October 24, 2027. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Quality control is governed by tailored higher-level requirements, and sampling must meet or exceed ASQ H1331 or MIL-STD-1916 standards via the Sikorsky Corporation alternate sampling plan. Item Unique Identification is not required per the service customer's request. Inspection and acceptance will take place at the destination.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-332J

This solicitation, issued by the Department of Defense Maritime Supply Chain under solicitation number SPE7M1-26-T-332J, is for the procurement of one foot of electrical wire identified by NSN 6145-01-695-9417. The contract requires delivery within five days after receipt of order to a performance location in FPO, ZIP 96306-0001. Alternate offerors must provide a complete data package for both approved and alternate parts. The procurement is subject to DLA packaging requirements and technical quality standards found in the DLA Master List. Specific delivery requirements are governed by the Advice code; codes 2N, 2B, or 34 require continuous length with no multiple unit packs, while codes 2P or 39 allow multiple unit packs provided the material is in continuous length. In the event of inconsistencies between the schedule and the Advice code, the Advice code takes precedence.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE4A5-26-T-416J

This contract is for the procurement of one mechanical puller, identified by NSN 5120-01-410-6739 and part number 70700-77390-041 for Sikorsky Aircraft Corporation. The solicitation, numbered SPE4A5-26-T-416J, specifies a delivery timeframe of 171 days after receipt of order, with a required delivery date of November 28, 2027. Shipping is set as FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, and incorporates various technical and quality requirements from the DLA Master List. Quality assurance is managed through a specific sampling plan for Sikorsky Corporation that must meet or exceed ASQ H1331 or MIL-STD-1916 standards. Notably, Item Unique Identification is not required for this request. Inspection and acceptance will take place at the destination.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE7M2-26-T-6738

This solicitation from the Department of Defense Nuclear Reactor Program is for the procurement of two special purpose cable assemblies under NSN 6150-01-651-9390. The contract requires delivery within 28 days after receipt of order and falls under NAICS code 332216. Performance is designated for New Cumberland, Pennsylvania. The agreement is subject to strict technical and quality requirements as defined in the DLA Master List, including specific packaging standards. Notably, the technical data for this item is subject to ITAR and EAR export controls, meaning it cannot be exported or disclosed to foreign nationals without prior authorization. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE8E6-26-T-4558

This contract is for the procurement of one unit of lead alloy solder, identified by NSN 3439015644264 and part number T-KST2437. Issued by the Defense Logistics Agency, the order specifies a delivery timeframe of 20 days after the order is placed, with an original required delivery date of September 3, 2026. The shipment is to be delivered FOB Origin and is destined for the 2nd Assault Amphibian Battalion at Camp Lejeune, North Carolina. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129. Depending on the hazardous material status per FED-STD-313, the item must be packaged according to either TQ requirement IP025 or ASTM D3951. Additionally, the contract incorporates technical and quality requirements from the DLA Master List and requires the removal of government identification from any non-accepted supplies. Shipping must be conducted via traceable means, and parcel post is explicitly prohibited.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE4A5-26-T-412L

This contract is for the procurement of seven seal installers, identified by NSN 5120011468246 and part number 70700-77308-041, for the Department of Defense. The order is designated under solicitation number SPE4A5-26-T-412L and specifies a delivery timeframe of 171 days after the order is placed, with a required delivery date of September 14, 2027. Shipping is FOB Origin, and the items are to be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, and incorporates technical and quality standards from the DLA Master List. Quality assurance will follow an alternate sampling plan provided by Sikorsky Corporation, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. Item Unique Identification is not required for this specific request.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-332G

This solicitation, issued by the Department of Defense Maritime Supply Chain, is for the procurement of one foot of electrical wire under solicitation number SPE7M1-26-T-332G. The contract requires strict adherence to DLA technical and quality requirements, specifically referencing RA001, RP001 for packaging, and RQ011 regarding the removal of government identification from non-accepted supplies. Delivery is required within five days after the order is received. The material must be provided in continuous length, with the acceptability of multiple unit packs determined by the specific advice code provided in the shipping information. Because no data is currently available for NSN 6145-01-695-9101, alternate offerors must provide a complete data package for both the approved and alternate parts. Responses are due by September 21, 2026.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-332C

This contract is a solicitation for the procurement of one 65 pound reel of magnet wire, identified by NSN 6145016798100 and part number MW020CHX024122UNC. The item is designated as a critical application item and must comply with TDP Rev B Gen 2 and NEMA MW1000 Revision NR standards. The procurement is conducted under full and open competition by the Department of Defense Maritime Supply Chain. Delivery is required within five days of order, with the final destination being Hill AFB in Utah. The contract mandates strict packaging and marking requirements, including the use of orientation arrows and specific stenciled warnings stating that the material is sensitive and must not be laid on its side. Compliance with MIL-STD-129, MIL-STD-2073-1E, and MIL-DTL-12000 is required for preservation and packaging. Shipping must be handled via the fastest traceable means, and the use of parcel post is prohibited.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-12GG

Solicitation SPE4A6-26-T-12GG is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of five socket head screw keys, identified by NSN 5120251623341. The requirement is not a small business set-aside and falls under NAICS code 332216. Delivery is required within 171 days after the order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. The items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, requiring packaging in accordance with ASTM D3951 and marking per MIL-STD-129, with DLA Master List technical requirements taking precedence. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based plan, and item unique identification is not required. Compliance with the Buy American Act and Berry Amendment is mandatory, and the use of additive manufacturing is prohibited. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7L5-26-T-5335

This contract, identified as SPE7L5-26-T-5335, is a solicitation for the procurement of one wrench, part number 24713711, manufactured by Fairbanks Morse, LLC. The item is associated with NSN 5120-01-209-8450 and is intended for delivery to the USS KEARSARGE LHD 3. The required delivery timeframe is 20 days after receipt of order, with an original required delivery date of May 12, 2026. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, and the use of mercury or mercury-containing compounds is prohibited except in specific functional cases. Because the item may require specialized casting or forging tooling that the government does not possess, contractors are directed to submit assistance requests through the DLA Aviation or Land and Maritime Supply Chain channels if necessary.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

WRENCH, VALVE SEAT RING

Solicitation # SPE4A6-26-T-28DP

This contract is a solicitation for the procurement of eight valve seat ring wrenches under NSN 5120-01-159-3043. The delivery requirement is set for 171 days after receipt of order. The acquisition is managed by the Department of Defense through the ASC Commodities Division, with performance located in Tracy, California. Compliance requirements are stringent, including CMMC Level 2 certification and adherence to DLA packaging and marking standards. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, and the contractor must ensure no mercury is intentionally added to the hardware. Additionally, the contract is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have approved JCP certification and completed specific DOD export-controlled technical data training.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

in 8 days

AI Contract Overview

The contract W3508-260272 involves the Department of National Defence's requirement for the supply and delivery of weapon storage lockers intended for secure armament storage at facilities including 4 CDTC Meaford and CFB Petawawa. This solicitation is a firm one-year contract with an option for installation services, and all products must be delivered by March 31, 2026. Bidders are required to fully meet mandatory technical criteria to be considered responsive, with any failure to comply resulting in disqualification. The submission deadline for bids and supporting documents is February 12, 2026, by 14:00 EST, and late submissions will not be accepted. The contract is managed by the Government of Canada's Department of Public Works and Government Services, with Christopher Harvey serving as the primary point of contact. The solicitation was posted on January 15, 2026, and applies to performance locations across Ontario outside the National Capital Region. The procurement emphasizes strict adherence to technical requirements to ensure the security and suitability of the storage lockers for military armaments, underlining the critical nature of this contract to national defense infrastructure.

General Info

One-year contract for weapon storage lockers delivery by March 2026, strict technical compliance required.

Agency

Government of Canada → Department of Public Works and Government ServicesView Agency

NAICS

332216 - Saw Blade and Handtool ManufacturingView NAICS

Place of Performance

*Ontario (except NCR), CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJan 15

Solicitation

Response DeadlineFeb 12

Deadline has passed

Submission Closed

02/12/2026, 02:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of Public Works and Government Services

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Department of Public Works and Government Services

View Agency Profile

Office AddressN/A

Contacts

Harvey Christopher (SPAC/PSPCPoint of Contact

contact@example.gov

Full Description

W3508-260272 Weapon Storage Lockers Christopher Harvey Telephone No.: (519) 671-2396 Christopher.harvey@tpsgc-pwgsc.gc.ca
The Department of National Defence, 4 CDTC Meaford and CFB Petawawa require the supply and delivery of weapon storage lockers for the storage of various armaments. RFP is for 1 firm year contract with optional installation. Product delivery before March 31 2026.
Bidders must clearly demonstrate compliance with each mandatory technical criteria. Failure to demonstrate compliance will result in the offer being deemed non-responsive, and be given no further consideration. AMENDMENT TO RESPONSE DEADLINE CLOSING TIME: Please disregard the Ariba Discovery posting response deadline closing time. All required supporting documentation and bid submission must be submitted via Ariba on 2026-02-12 by 14:00 EST. All bids submitted after 14:00 EST will result in the bid being declared non-responsive.