Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Wagner Paint Proportioner Maintenance & Repair

Active

Federal

Response Deadline09/28/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity with the Department of Defense, specifically AFSC OL H PZIM, involves the specialized servicing, maintenance, and repair of Wagner Paint Proportioner systems at Hill Air Force Base. The selected contractor will be responsible for performing critical tasks including calibration, seal replacement, pump maintenance, and system testing to ensure accurate paint-to-hardener ratios, ultimately delivering a fully operational system. Eligible bidders must demonstrate a documented history of providing similar services to government or commercial clients within the last three years. The project falls under NAICS code 811310, with a response deadline of September 28, 2026.

General Info

DoD subcontract for Wagner Paint Proportioner maintenance at Hill AFB; deadline September 28, 2026.

Agency

Department Of Defense → FA8227 Afsc Ol H PzimView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

Hill Air Force Base, UT, 84056, USA

Set-Aside

NONE

Documents

This scope was carved out of FA8227-26-Q-1003.

The full solicitation package (11 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

15617 - Wagner Paint Proportioner

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 16

subcontract

Response DeadlineSep 28

Submission deadline

Response Deadline

09/28/2026, 09:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8227 Afsc Ol H Pzim

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA8227 Afsc Ol H Pzim

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized servicing, maintenance, and repair of Wagner Paint Proportioner systems for prime contractors on AFSC OL H PZIM projects. Conducts calibration, seal replacement, pump maintenance, and system testing to ensure precise paint-to-hardener ratios. Requires a documented history of similar services provided to government or commercial customers within the last three years. Delivers a fully serviced and operational system.

Similar Contracts

Same NAICS industry code

RFQ#3857 Replace Walk-In Cooler and Freezer Doors

Solicitation # RFQ#3857

Management & Training Corporation (MTC) is soliciting bids under RFQ#3857 for a subcontracting opportunity to replace three walk-in refrigeration doors at the Charleston Job Corps Center in Charleston, West Virginia. The scope of work requires the contractor to provide all labor, materials, and supervision to remove and dispose of existing doors and install one walk-in cooler door and two walk-in freezer doors. The project includes the installation of all necessary hardware, such as hinges, latches, gaskets, and thresholds, ensuring airtight sealing and proper alignment. Deliverables include the fully operational doors and a minimum one-year workmanship warranty along with manufacturer certificates. This is a lump sum fee contract open to various small business set-asides, including SDB, WOSB, HUBZone, and SDVOSB. Bidders must submit their proposals via email by September 28, 2026, at 3:00 PM EST. Required submission documents include a bid sheet, a completed supplier packet with IRS W-9 and self-certification forms, proof of insurance, and three references for similar projects. Award selection is based on best value as determined by MTC. The contractor must comply with OSHA safety requirements, the Buy American Act, and Service Contract Labor Standards under Wage Determination 2015-4347. Invoicing is to be submitted on a weekly or bi-weekly basis and must include a valid purchase order number.

Management & Training Corporation

POSTED

about 8 hours ago

DEADLINE

81--CYLINDER,COMPRESSED, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QSC29

This presolicitation contract, issued by the Department of Defense under Navsup Weapon Systems Support, is for the repair or modification of 40 compressed cylinders identified by NSN 7R-8120-016571545-P8. The requirement specifies the use of TDP Version 002 and stipulates that delivery will be handled FOB Origin. The solicitation, numbered N0038326QSC29, was posted on September 16, 2026, with a response deadline of November 2, 2026. The contracting office is located in Philadelphia, Pennsylvania, and the primary point of contact for this requirement is Sarah L. Austin.

Navsup Weapon Systems Support

POSTED

about 12 hours ago

DEADLINE

in about 2 months

Leavenworth, TX CMOP - Walk-in Cooler Repair

Solicitation # 36C77026Q0184

This solicitation, numbered 36C77026Q0184, is for the repair of a walk-in cooler at the Department of Veterans Affairs CMOP facility located in Lancaster, Texas. The project is designated as a 100 percent set-aside for Service-Disabled Veteran-Owned Small Businesses and has an estimated magnitude of less than 25,000 dollars. A site visit is scheduled for September 17, 2026, at 12:00pm Central, requiring coordination with William Byrd and Robert Gochenour. Interested parties must submit their responses by the deadline of September 23, 2026.

National Cmop Office (36C770)

POSTED

about 12 hours ago

DEADLINE

High Reach Genie Services

Solicitation # FA660626Q0033

Solicitation FA600626Q0033 is a small business set-aside for a firm-fixed-price contract to provide preventative maintenance and unscheduled mechanical repairs for a fleet of eight specialized aerial boom lifts, scissor lifts, and material handling tow tractors at Westover Air Reserve Base. The requirement includes annual and quarterly safety compliance checks and strict emergency response timelines, requiring technicians to arrive on-site within 24 hours of notification, provide estimates within 24 business hours of diagnosis, and complete repairs within 24 hours of approval. Technicians must hold ANSI/IPAF or equivalent commercial certifications for Genie, JLG, or Toyota equipment. The government will award the contract based on the Lowest Price Technically Acceptable (LPTA) method, evaluating offerors on a pass/fail basis regarding personnel qualifications and their responsive deployment plan. Proposals must be submitted electronically by September 16, 2026, and include personnel credentials, a deployment narrative, and pricing tables for the base and option years. The fleet currently consists of four active assets, with four additional assets to be phased in via administrative modification upon delivery.

FA6606 439 Conf Pk

POSTED

about 12 hours ago

DEADLINE

RFQ - Uninterruptible Power Supply (UPS) Units Maintenance and Repair Support Services

Solicitation # PANAPG-26-Q-0UPS

POSTED

about 12 hours ago

DEADLINE

J059--PNEUMATIC TUBE SYSTEM PM&R SERVICES HARRY S TRUMAN VA MEDICAL CENTER COLUMBIA, MISSOURI

Solicitation # 36C25527Q0007

The Department of Veterans Affairs, specifically Network Contracting Office 15, is conducting market research through a sources sought notice for pneumatic tube system preventive maintenance and repair services at the Harry S Truman VA Medical Center in Columbia, Missouri. This announcement is for research purposes only and is not a formal request for proposals or quotes. The government intends to set this requirement aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB), though it remains open to other qualified sources across various size classifications under NAICS code 811310 and PSC J059. Interested contractors must submit their capabilities and the required contractor fillable form to the primary point of contact, Greg McMillan Sr., by 10:00 a.m. CST on October 16, 2026. The information gathered will be used to determine the feasibility of a competitive procurement and to make final acquisition decisions. Respondents will not be notified of the results of this market research, and the government assumes no commitment to pay for costs associated with the submission of information.

255-NETWORK Contract Office 15 (36C255)

POSTED

about 12 hours ago

DEADLINE

Barge #600 Hydraulic Lines Replacement for Missouri River Project Office (MRPO)

Solicitation # W9128F26QA097

Solicitation W9128F26QA097 is a firm-fixed-price request for proposals issued by the Department of Defense for the maintenance overhaul and replacement of the high-pressure hydraulic piping system on Equipment Barge #600. Located at the Missouri River Project Office in Omaha, Nebraska, the project requires the removal and replacement of both flexible lines inside the hull and rigid steel lines housed above deck. The scope of work includes draining and disposing of hydraulic fluid, furnishing new materials—specifically Schedule 160 seamless steel pipe and SAE 100R12 flexible lines—performing pressure testing at 3000 psi, and conducting necessary structural repairs such as cutting and patching access holes with ASTM A36 carbon structural steel. The period of performance is scheduled from November 15, 2026, through March 15, 2027. This is a total small business set-aside, and the government will award the contract to the offeror providing the best value, considering both price and past performance. Offerors must demonstrate experience by providing up to three projects of similar magnitude completed within the last five years. Due to the nature of the work, the contractor must adhere to strict safety protocols for permit-required confined spaces, complying with EM 385-1-1 and OSHA standards, and must maintain independent on-site rescue procedures. Key submittals required before work begins include a site-specific health and safety plan, a work plan, material certifications, and proof of insurance. Proposals must be submitted electronically to Grant Hibbs no later than September 18, 2026, at 2:00 PM local time. A site visit is scheduled for September 11, 2026, requiring RSVP and specific confined space documentation for barge access.

W071 Endist Omaha

POSTED

about 12 hours ago

DEADLINE

TURBOCHARGER EXHAUST LEFT

Solicitation # 70Z08026QDL062

The United States Coast Guard Surface Forces Logistics Center is soliciting quotations for the open, inspection, report, and possible overhaul of four left-side turbochargers, part number EX59610100196 and NSN 2950 12 390 5601. These components are used on 154 foot WPC vessel MTU 4000 series diesel engines. The requirement is a total small business set-aside under NAICS 811310, with an estimated total value of 57,057 dollars. The objective is to restore the units to a service ready condition in strict accordance with Original Equipment Manufacturer specifications from Rolls Royce Solutions GMBH. Substitute parts are not acceptable, and the contractor must use only OEM parts and procedures to ensure vessel safety and mission reliability. The contract is a firm fixed price award based on the lowest price technically acceptable offer. The contractor must provide a separate inspection fee and a firm fixed repair price per unit. Deliveries are required by December 20, 2026, F.O.B. Destination to the SFLC receiving room in Baltimore, Maryland. Strict preservation, packaging, and marking standards apply, including the use of ASTM D-3951 or ASTM-D6880 heavy duty wooden crates and marking in accordance with MIL-STD-129R. The contractor must guarantee the items against defects for 90 days after installation or up to two years after delivery. All offerors must be registered in SAM.gov and provide necessary representations and certifications.

Sflc Procurement Branch 1(00080)

POSTED

about 12 hours ago

DEADLINE

CATEGORY 5 SAFETY TEST ON THE TRACTION ELEVATOR U.S. ARMY CORPS OF ENGINEERS SAM RAYBURN POWER PLANT, JASPER, TEXAS

Solicitation # W9126G26QA125

W076 Endist Ft Worth

POSTED

about 12 hours ago

DEADLINE

Provide Bobcat T870 Compact Track Loader Repair for the USCG BASE PORTSMOUTH

Solicitation # 31040RFQ260001463

Base PORTSMOUTH(00027)

POSTED

about 12 hours ago

DEADLINE

Angell JCCCC Elevator Maintenance and Inspection

Solicitation # 1282A726Q0030

Angell Job Corps

POSTED

about 12 hours ago

DEADLINE

15617 - Wagner Paint Proportioner

Solicitation # FA8227-26-Q-1003

The U.S. Air Force, through the FA8227 Afsc Ol H Pzim office at Hill Air Force Base in Utah, has issued a Sources Sought Synopsis under solicitation number FA8227-26-Q-1003 for Wagner Paint Proportioner Servicing, identified by NAICS code 811310 with a size standard of $12.5 million in annual revenue. This notice is strictly for market research and planning purposes and does not constitute a solicitation, request for quotation, or offer to award a contract. Respondents are required to submit a Qualifications Summary and a Contractor Capability Survey via email to Hugo Ruano Gutierrez and Hideo Mera, including the notice ID and requirement title, with submission due by close of business on July 1, 2026. The Capability Survey must include the company name, address, point of contact, CAGE or UEI code, phone, email, website, ownership status, Central Contractor Registration status, business size certification, and socioeconomic designations such as Small Business, Woman Owned, 8(a), HUBZone, Veteran Owned, or Service Disabled Veteran Owned. Additionally, respondents must describe past performance in similar government and commercial services over the prior three years, clearly delineate roles in any teaming arrangements, and avoid referencing external vendor websites. No contract award will result from this notice, no questions will be answered, and submitted materials will not be returned. The performance location is Hill Air Force Base, Utah, and the work scope is defined in an attached Performance Work Specification, though no pricing, delivery schedules, or inspection criteria are provided as this is a pre-solicitation information-gathering tool.

FA8227 Afsc Ol H Pzim

POSTED

about 12 hours ago

DEADLINE

More opportunities from Department Of Defense → FA8227 Afsc Ol H Pzim

Same awarding agency

Specialized Paint Equipment Parts SupplyThis subcontract for Specialized Paint Equipment Parts Supply involves the sourcing and delivery of genuine OEM replacement parts, seals, and consumables for Wagner Paint Proportioners. The contract supports prime contractors on AFSC OL H PZIM projects under the Department of Defense, ensuring that all components and certified OEM kits meet strict government specifications for proportioner system servicing. The work is performed at Hill Air Force Base, Utah, under NAICS code 423830. The solicitation was posted on September 16, 2026, with a response deadline of September 28, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

Xact Metal XM200G & G2 Service Agreement and Parts CareThis subcontract focuses on providing preventative maintenance and parts care for Xact Metal XM200G and G2 metal powder-bed fusion 3D printers. The services are intended for prime contractors supporting the RAPID Innovation Center at Hill Air Force Base, with the primary goal of ensuring equipment uptime through scheduled maintenance visits and the provision of necessary labor and parts. The contract requires the use of certified Xact Metal service technicians who are capable of performing on-site services at the Hill Air Force Base location. This opportunity is managed under the Department of Defense, specifically the AFSC OL H PZIM, and falls under NAICS code 811219.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Materialize Magics Print Software LicensesThis subcontract with the Department of Defense provides annual Materialize Magics Print software licenses to prime contractors supporting the RAPID Innovation Center at Hill Air Force Base. The agreement covers the delivery and management of five active user licenses for an initial base year with four optional extension years. Eligible bidders must hold authorized software reseller or OEM status for Materialize or Xact Metal software. The opportunity is categorized under NAICS code 511210 and requires responses by September 23, 2026.

Software Publishers

POSTED

DEADLINE

15757 - Xact Metal 3D Printer Services

Solicitation # FA8227-26-Q-1106

Solicitation FA8227-26-Q-1106 is a combined contract opportunity issued by the Department of Defense, specifically the AFSC OL H PZIM at Hill Air Force Base, Utah, for Xact Metal 3D printer services. The requirement focuses on providing software licenses and service agreements for a government-owned Xact Metal XM200G and G2 metal powder-bed fusion 3D printer. Key deliverables include five annual licenses for Materialize Magics Print for Xact Metal, which must be compatible with Windows 10 or newer, as well as a base-year service agreement and parts care plan for the XM200G and G2 systems. The contract structure includes one base year for the service agreement and parts care, with four optional additional service years available. The service agreement encompasses preventative maintenance, though it contains specific exclusions for certain parts and labor. This procurement falls under NAICS code 334111 and is not a set-aside. Interested parties must submit responses by September 23, 2026, and are instructed to reference the notice ID and Xact Metal in all email correspondence directed to the primary point of contact, Hugo Ruano Gutierrez, or secondary contact, Hideo Mera.

Electronic Computer Manufacturing

POSTED

DEADLINE

Electrical and Facility Support

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 21 hours

Specialized Rigging and Transport

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

in about 21 hours

X-Ray Diffraction Instrument Technical Re-installation

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

in about 21 hours

X-Ray Diffraction Instrument Re-installation

Solicitation # FA822726QXRAY

This Sources Sought Synopsis is a market research effort by the Department of Defense to identify capable sources for the re-installation of X-Ray Diffraction Instruments. The government is seeking to determine if there are sufficient responsible sources to justify a competitive procurement or a total Small Business Set-aside. The effort is categorized under NAICS code 811210, which has a size standard of 34 million dollars, and is open to all small business types, including 8(a), Hubzone, and Service-Disabled Veteran-Owned concerns, as well as large businesses. Interested parties must submit a summary of their qualifications, business information, and a description of similar services provided to government or commercial customers over the last three years. Responses must be submitted to the point of contact at Hill Air Force Base by September 17, 2026. This notice is for planning purposes only and does not constitute a formal request for proposal or a commitment to award a contract.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

in about 21 hours

Advanced Training for Air Force PersonnelThis contract involves providing specialized, hands-on training to Air Force personnel focused on the operation, maintenance, and troubleshooting of the CT X5000 system. The training aims to equip military staff with advanced skills to effectively manage this specific technology, ensuring operational readiness and technical competence within the Air Force. The contract is classified as a subcontract under the NAICS code 611430, which pertains to professional and management development training services. Issued by the Department of Defense under the office code FA8227 Afsc Ol H Pzim, this contract supports the Air Force's ongoing educational and technical development initiatives. Specific details such as the solicitation number, type of set-aside, location of performance, and point of contact were not provided. The official information and updates regarding this contract can be accessed through the government’s SAM website.

Professional and Management Development Training

POSTED

DEADLINE

On-Call Technical Support & Emergency RepairsThis contract entails providing continuous, around-the-clock technical support for the CT X5000 system, addressing system failures through both remote diagnostics and on-site repair services. The scope ensures rapid response to any issues that arise, minimizing downtime and maintaining operational functionality. It is a subcontract arrangement under the Department of Defense, specifically managed by the FA8227 Afsc Ol H Pzim office. The contract falls under the NAICS code 811212, which relates to computer and office machine repair and maintenance. Although specific location details and points of contact are not provided, the emphasis is on emergency repair services and technical assistance to support the system's reliability. The posting date is February 2, 2026, highlighting a forthcoming operational timeline. This ensures that the CT X5000 system will receive dedicated maintenance support in critical situations, reinforcing its availability for mission-essential activities.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Replacement of efx-CT 4G and efx-DR WorkstationsThe contract involves the supply and installation of new efx-CT 4G and efx-DR workstations, including the decommissioning of existing legacy units and the integration of the new systems. This effort focuses on replacing older equipment with updated workstations to enhance operational capabilities and ensure seamless system functionality. The work includes both hardware deployment and the technical integration required to support continued mission requirements. Issued as a subcontract by the Department of Defense under NAICS code 334111, the contract was posted on February 2, 2026. It falls under the oversight of the FA8227 Afsc Ol H Pzim office within the Department of Defense. While specific details regarding the place of performance and point of contact are not disclosed, the contract reflects a critical modernization initiative aimed at upgrading defense systems equipment.

Electronic Computer Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS