Wall Type Air Conditioner Installation

Solicitation Number: FA5209-17-U-0039 DEPARTMENT OF THE AIR FORCE PACIFIC AIR FORCES YOKOTA AIR BASE Notice Type: Combined Synopsis/Solicitation Synopsis: RFQ - Purchase of A/C Units for 374 MXG Requesting Agency: 374th Maintenance Squadron Unit 5115 Bldg 906, Yokota Air Base Fussa-shi, Tokyo 197-0001 Japan Purchasing Agency: 374th Contracting Squadron/LGCB Unit 5228, Bldg 620, Yokota Air Base Fussa-shi, Tokyo 197-0001 Japan This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. THIS REQUEST DOES NOT COMMIT THE GOVERNMENT TO PAY ANY COSTS INCURRED IN PREPARATION OF YOUR SUBMISSION OR TO ISSUE AN ORDER FOR SUPPLIES AND SERVICES. The following solicitation document, incorporated provisions, and clauses are in effect through Federal Acquisition Circular 2005-95 effective 19 Jan 2017, DFARS publication notice 20161222 effective 22 Dec 2016, and AFFARS Acquisition Circular 2017-0127 effective 27 Jan 2017. It is the responsibility of the offeror to be familiar with the applicable clauses and provisions. Clauses and provisions may be accessed via the Internet at http://farsite.hill.af.mil/. Quotations are due by 7 September, 2017 at 11:00 P.M. Eastern (8 September 12:00 P.M. Japan) Requests for Information are due by COB 5 September, 2017 at 11:00 P.M. Eastern ( 6 September 12:00 P.M. Japan). Potential offerors are to provide a quote for the purchase of the following Line Items: CLIN 0001 - Installation of A/C Units at Bldg 906 (See Attachment 1 Statement of Work) CLIN 0002 - Manf: Hitachi; P/N: RPK-GP40RSH (3P200V) or equal - 1 Each CLIN 0003 - Manf: Hitachi; P/N: RPK-GP45RSH (3P200V) or equal - 1 Each CLIN 0004 - Manf: Hitachi; P/N: RPK-GP80RSH (3P200V) or equal - 8 Each CLIN 0005 - Manf: Hitachi; P/N: RPK-GP56RSH (3P200V) or equal - 2 Each CLIN 0006 - Manf: Hitachi; P/N: RPK-GP112RSH (3P200V) or equal - 1 Each CLIN 0007 - Manf: Hitachi; P/N: RPK-GP50RSH (3P200V) or equal - 2 Each CLIN 0008 - Manf: Hitachi; P/N: RPK-GP63RSH (3P200V) or equal - 1 Each FAR 52.212-1 INSTRUCTIONS TO OFFERORS: Please reference FAR provision 52.212-1, Instructions to Offerors, below: All quotations must include the following information: 1. Company's complete mailing and remittance address 2. Discounts for prompt payment - if any 3. Discounts to the Government - if any 4. Warranty Period for requested items (CLIN 0001 - CLIN 0008) 5. Quotations must be valid for a period of no less than 60 days 6. Quotations shall include the Vendor's Technical Capability as follows: a. CLIN 0001 - 0008, provide a unit price and total b. Item catalog (or specifications) for the subject item or "or Equal" items c. FAR 52.212-3, Offeror Representations and Certifications -- Commercial Items (Jan 2017) (Offeror shall include a completed copy of the provision (See Attachment 2) d. FAR 52.204-7, System for Award Management: i. All vendors must be registered in System for Award Management (SAM) in order to be considered for award. Registration can be accomplished at www.sam.gov. Delivery of the requirement shall be made (FOB Destination) to: ATTN: SSgt Tyler Bishop 374th Maintenance SQ MXS Unit 5115 Bldg. 906 Yokota AB Fussa-shi, Tokyo 197-0001 Japan Or ATTN: SSgt Tyler Bishop 374 MXS/MXMFN Unit 5115 APO, AP 96328-5115 Not later than 30 days after receipt of the Government's offer (ARO). If this delivery schedule cannot be met, the vendor must specify their proposed delivery schedule in their offer. SOLICITATION CLOSING INFORMATION Deadline for receipt of offers: 5 September 2017 at 11:00 PM Eastern (6 September 12:00 PM Japan) Request for Information/Questions 3 September 2017 at 11:00 PM Eastern (4 September 12:00 PM Japan) Quotations and Request for Information shall be submitted via e-mail to demarquis.bell@us.af.mil and Courtesy Copy (CC) SSgt Jacqueline Bongard at jacqueline.bongard@us.af.mil. SOLICITATION ATTACHMENTS Attachment 1: Hangar 15 A/C SoW (or equal items must meet the requirements of the SoW) Attachment 2: FAR 52.212-3 Attachment 3: FAR 52.212-5 FAR 52.212-2 EVALUATION OF OFFERS This is a competitive solicitation for quotations utilizing Lowest Price Technically Acceptable (LTPA). The Government will award one contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be the most advantageous to the Government, price and other factors considered. The Government intends to award without discussions with respective offerors. The Government, however, reserves the right to conduct discussions if deemed in its best interest. The following list are evaluation factors that shall be used in the evaluation process: 1. Price 2. Technical Acceptability (i) Initially, offers shall be ranked according to evaluated prices. The price evaluation will document for the offers completion and reasonableness of the proposed price. Incomplete or unreasonable offers shall be rejected and eliminated from further consideration. Next the offers shall be listed in order of least expensive to most expensive. (ii) The offers will be evaluated based on pricing with the lowest priced offer being evaluated first. The lowest priced offer will be evaluated for Technical Acceptability. Technical Acceptability for all offerors will be rated as "Acceptable" or "Unacceptable" by the Government. If the lowest priced offer is rated "Acceptable" (as defined in 3. Technical Acceptability Ratings) a Purchase Order will be awarded to that Offeror. If the lowest priced is rated "Unacceptable" the Government will disqualify that offer from award and evaluate the next lowest offer for Technical Acceptability. This process will continue until an offeror is found to meet the Government's definition of an "Acceptable" offer. 3. Technical Acceptability Ratings a. Acceptable: Technical Acceptability is achieved when the offeror provides a quote of the exact or equal items with proof that the products and services meet the descriptions listed on Attachment 1; Hangar 15 A/C Installation SoW. As outlined in section 2.2.3. of the SOW, the Contractor shall possess valid "General Construction Business license"??? ?????? ?in the category of "Electrical Engineer" (????) to perform air conditioning system installation services in this facility on Yokota Air Base in conformance with local commercial and industrial standards. b. Unacceptable: Offered products/services do not meet the item descriptions listed on Attachment 1; Hangar 15 A/C Installation SoW and/or vendor does not have the qualifications/licenses outlined in section 2.2.3. of the SOW 4. Brand Name or Equal (see FAR 52.211-6, Brand Name or Equal) To be considered for award, offers or "equal" products, including "equal" products of the brand name manufacturer, must meet the salient functional or performance characteristics specified in this solicitation and statement of work (SOW); clearly identify the item by brand name, if any; and make or model number. Include descriptive literature such as illustrations, drawings, or a clear reference to previously furnished descriptive data or information available to the Contracting Officer; and clearly describe any modification the Offeror plans to make in a product to make it conform to the solicitation requirements. Mark any descriptive material to clearly show the modification. The Contracting Officer will evaluate "equal" products on the bases of information furnished by the offeror or identified in the offer and reasonably available to the Contracting Officer. The Contracting Officer is not responsible for locating or obtaining any information not identified in the offer. Unless the Offeror clearly indicates in its offer that the product being offered is an "equal" product, the Offeror shall provide the brand name product referenced in the solicitation. The following clauses/provisions are incorporated by reference: FAR 52.203-18, Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements--Representation (Jan 2017) FAR 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements FAR 52.204-16, Commercial and Government Entity Code Reporting (Jul 2016) \ FAR 52.204-17, Ownership or Control of Offeror (Jul 2016) FAR 52.204-18, Commercial and Government Entity Code Maintenance (Jul 2016) FAR 52.204-19, Incorporation by Reference of Representations and Certifications (Dec 2014) FAR 52.204-20, Predecessor of Offeror (Jul 2016) FAR 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015) FAR 52.209-11, Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction (Feb 2016) FAR 52.212-4, Contract Terms and Conditions -- Commercial Items (Jan 2017) FAR 52.225-25, Prohibition on Contracting with Entities Engaging in Certain Activities or transactions Relating to Iran--Representation and Certifications (Oct 2015) FAR 52.232-39, Unenforceability of Unauthorized Obligations (Jun 2013) FAR 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Dec 2013) FAR 52.247-34, FOB Destination DFARS 252.203-7000, Requirements relating to Compensation of Former DoD Officials (Sep 2011) DFARS 252.203-7002, Requirement to Inform Employees of Whistleblower Rights (Sep 2013) DFARS 252.203-7005, Representation Relating to Compensation of Former DoD Officials (Nov 2011) DFARS 252.204-7008, Compliance with Safeguarding Covered Defense Information Controls (Oct 2016) DFARS 252.204-7011, Alternative Line-Item Structure (Sep 2011) DFARS 252.204-7012, Safeguarding Covered Defense Information and Cyber Incident Reporting (Oct 2016) DFARS 252.204-7015, Notice of Authorized Disclosure of Information for Litigation Support (May 2016) DFARS 252.223-7008, Prohibition of Hexavalent Chromium (Jun 2013) DFARS 252.225-7048, Export-Controlled Items (Jun 2013) DFARS 252.247-7023, Transportation of Supplies by Sea--Basic (Apr 2014) The following clauses/provisions are incorporated by full text: FAR 52.204-22 Alternative Line Item Proposal (Jan 2017) (a) The Government recognizes that the line items established in this solicitation may not conform to the Offeror's practices. Failure to correct these issues can result in difficulties in acceptance of deliverables and processing payments. Therefore, the Offeror is invited to propose alternative line items for which bids, proposals, or quotes are requested in this solicitation to ensure that the resulting contract is economically and administratively advantageous to the Government and the Offeror. (b) The Offeror may submit one or more additional proposals with alternative line items, provided that alternative line items are consistent with subpart 4.10 of the Federal Acquisition Regulation. However, acceptance of an alternative proposal is a unilateral decision made solely at the discretion of the Government. Offers that do not comply with the line items specified in this solicitation may be determined to be nonresponsive or unacceptable. (End of provision) FAR 52.207-4, Economic Purchase Quantity--Supplies (Aug 1987) (a) ) Offerors are invited to state an opinion on whether the quantity(ies) of supplies on which bids, proposals or quotes are requested in this solicitation is (are) economically advantageous to the Government. (b) Each offeror who believes that acquisitions in different quantities would be more advantageous is invited to recommend an economic purchase quantity. If different quantities are recommended, a total and a unit price must be quoted for applicable items. An economic purchase quantity is that quantity at which a significant price break occurs. If there are significant price breaks at different quantity points, this information is desired as well. OFFEROR RECOMMENDATIONS ITEM QUANTITY PRICE QUOTATION TOTAL (c) The information requested in this provision is being solicited to avoid acquisitions in disadvantageous quantities and to assist the Government in developing a data base for future acquisitions of these items. However, the Government reserves the right to amend or cancel the solicitation and resolicit with respect to any individual item in the event quotations received and the Government's requirements indicate that different quantities should be acquired. (End of Provision) FAR 52.209-11, Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law (Feb 2016) (a) ) Offerors are invited to state an opinion on whether the quantity(ies) of supplies on which bids, proposals or quotes are requested in this solicitation is (are) economically advantageous to the Government. (b) Each offeror who believes that acquisitions in different quantities would be more advantageous is invited to recommend an economic purchase quantity. If different quantities are recommended, a total and a unit price must be quoted for applicable items. An economic purchase quantity is that quantity at which a significant price break occurs. If there are significant price breaks at different quantity points, this information is desired as well. OFFEROR RECOMMENDATIONS ITEM QUANTITY PRICE QUOTATION TOTAL (c) The information requested in this provision is being solicited to avoid acquisitions in disadvantageous quantities and to assist the Government in developing a data base for future acquisitions of these items. However, the Government reserves the right to amend or cancel the solicitation and resolicit with respect to any individual item in the event quotations received and the Government's requirements indicate that different quantities should be acquired. (End of Provision) FAR 52.212-5, Contract Terms and Conditions--Commercial Items (Jan 2017) - (See Attachment 3) FAR 52.225-18, Place of Manufacture (Mar 2015) (a) ) Offerors are invited to state an opinion on whether the quantity(ies) of supplies on which bids, proposals or quotes are requested in this solicitation is (are) economically advantageous to the Government. (b) Each offeror who believes that acquisitions in different quantities would be more advantageous is invited to recommend an economic purchase quantity. If different quantities are recommended, a total and a unit price must be quoted for applicable items. An economic purchase quantity is that quantity at which a significant price break occurs. If there are significant price breaks at different quantity points, this information is desired as well. OFFEROR RECOMMENDATIONS ITEM QUANTITY PRICE QUOTATION TOTAL (c) The information requested in this provision is being solicited to avoid acquisitions in disadvantageous quantities and to assist the Government in developing a data base for future acquisitions of these items. However, the Government reserves the right to amend or cancel the solicitation and resolicit with respect to any individual item in the event quotations received and the Government's requirements indicate that different quantities should be acquired. (End of Provision) FAR 52.252-2 Clauses Incorporated By Reference (Feb 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): https://farsite.hill.af.mil/ (End of clause) DFARS 252.211-7003 Item Unique Identification and Valuation (Mar 2016) (a) Definitions. As used in this clause- "Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media. "Concatenated unique item identifier" means- (1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or (2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number. "Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022. "Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows. "DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html. "DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number. "Enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items. "Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency. "Government's unit acquisition cost" means- (1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery; (2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and (3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery. "Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459. "Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier. "Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts. "Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions. "Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards. "Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface. "Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent. "Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise. "Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment. "Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier. "Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier. "Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto. "Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent. "Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html. (b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item. (c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following: (i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items: Contract Line, Subline, or Exhibit Line Item Number Item Description (ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table: Contract Line, Subline, or Exhibit Line Item Number Item Description (If items are identified in the Schedule, insert "See Schedule" in this table.) (iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number _. (iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number _. (v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability. (2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor. (3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification. (4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that- (i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor: (A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard. (C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and (ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media. (5) Unique item identifier. (i) The Contractor shall- (A) Determine whether to- (1) Serialize within the enterprise identifier; (2) Serialize within the part, lot, or batch number; or (3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and (B) ) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version; (C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and (D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version. (ii) The issuing agency code- (A) ) Shall not be placed on the item; and (B) ) Shall be derived from the data qualifier for the enterprise identifier. (d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information: (1) Unique item identifier. (2) Unique item identifier type. (3) Issuing agency code (if concatenated unique item identifier is used). (4) Enterprise identifier (if concatenated unique item identifier is used). (5) Original part number (if there is serialization within the original part number). (6) Lot or batch number (if there is serialization within the lot or batch number). (7) Current part number (optional and only if not the same as the original part number). (8) Current part number effective date (optional and only if current part number is used). (9) Serial number (if concatenated unique item identifier is used). (10) Government's unit acquisition cost. (11) Unit of measure. (12) Type designation of the item as specified in the contract schedule, if any. (13) Whether the item is an item of Special Tooling or Special Test Equipment. (14) Whether the item is covered by a warranty. (e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information: (1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part. (2) Unique item identifier of the embedded subassembly, component, or part. (3) Unique item identifier type.** (4) Issuing agency code (if concatenated unique item identifier is used).** (5) Enterprise identifier (if concatenated unique item identifier is used).** (6) Original part number (if there is serialization within the original part number).** (7) Lot or batch number (if there is serialization within the lot or batch number).** (8) Current part number (optional and only if not the same as the original part number).** (9) Current part number effective date (optional and only if current part number is used).** (10) Serial number (if concatenated unique item identifier is used).** (11) Description. ** Once per item. (f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows: (1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/. (2) Embedded items shall be reported by one of the following methods- (i) Use of the embedded items capability in WAWF; (ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site/uidregistry/; or (iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) , Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423. (g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial items. (End of clause) DFARS 252.232-7006, Wide Area Workflow Payment Instructions (May 2013) (a) Definitions. As used in this clause- "Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization. "Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF). "Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system. (b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. (c) WAWF access. To access WAWF, the Contractor shall- (1) Have a designated electronic business point of contact in the System for Award Management at https://www.acquisition.gov; and (2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site. (d) WAWF training. The Contractor should follow the training instructions of the WAWF Web- Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/ (e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol. (f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order: (1) Document type. The Cont...