Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Warranty and Damage Reporting Support

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract governs post-delivery support for damaged tires, encompassing both transit-related and non-transportation damage incidents, managed through the WEBSDR system for accurate reporting and documentation. It requires the contractor to coordinate warranty replacements in a timely and compliant manner, ensuring that damaged tires are properly assessed, reported, and substituted according to established protocols. All activities must align with the Department of Defense's requirements under the Defense Logistics Agency, maintaining consistent standards across the supply chain. This subcontract, identified under NAICS code 811310, is tied to contract SPE7LX26F86A9 and is linked to the broader award SPE7LX19D0029. The work must be performed in support of defense operations, with no specific geographic restriction indicated for performance, but all reporting and replacement coordination must follow the centralized WEBSDR procedures. The contract remains active under the terms established as of August 1, 2026, and is designed to ensure operational readiness by maintaining tire inventory integrity and minimizing downtime due to damage-related logistics failures.

General Info

Contract manages damaged tire replacements via WEBSDR for DoD, ensuring timely warranty compliance and supply chain readiness through SPE7LX26F86A9.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 1

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Post-delivery support for damaged tires including transit damage reporting and non-transportation damage via WEBSDR; coordinate warranty replacements.

Similar Contracts

Same NAICS industry code

Respirator Test Equipment

Solicitation # N0018926QW308

The U.S. Navy’s NAVSUP Fleet Logistics Center in Norfolk, Virginia, is seeking to award a sole source firm fixed price contract to TSI, Inc. for PortaCount Model 8048-T Respirator Fit Testing Machines and associated testing kits, as TSI is the exclusive manufacturer and distributor of this required equipment. These devices are critical for Navy Region Mid-Atlantic to ensure proper fit of respirators like N95s, SCBAs, and gas masks, guaranteeing maximum respiratory protection for personnel in hazardous environments. Delivery is to be made FOB destination to Great Lakes, Illinois, no later than 30 days after contract award, with the supplier responsible for all quality control and inspection duties, though the government will perform final acceptance upon delivery. The procurement falls under NAICS code 811310 with a size standard of $12.5 million and is being conducted under FAR Part 12 procedures for commercial acquisitions. All solicitations and amendments will be available exclusively through the SAM.gov website, with no hard copies issued. Any vendor submitting a quote must be registered in SAM prior to award and must self-certify that neither the requestor nor corporate officials are suspended or debarred from federal contracting. Questions regarding the requirement should be directed to Contract Specialist Kelley Nevelsteen.

Navsup Flt Logistics Ctr Norfolk

POSTED

about 9 hours ago

DEADLINE

Warranty and Defect Resolution SupportThe contract governs the management of warranty claims for damaged or defective tires under the auspices of the Defense Logistics Agency, a component of the Department of Defense. It outlines a structured process for identifying and resolving tire defects, with transit-related damage addressed through a dedicated vendor hotline and non-transportation defects reported via the Web-Based Supply Discrepancy Reporting system. The work is classified under NAICS code 811310, indicating it pertains to automotive repair and maintenance services, and is structured as a subcontract supporting broader defense supply chain operations. The contract was posted on August 1, 2026, and is linked to the master contract SPE7LX19D0029 with delivery order SPE7LX26F86E2, ensuring alignment with existing procurement frameworks. All claims processing and resolution activities must comply with established DLA protocols to maintain supply readiness and minimize operational disruption.

Defense Logistics Agency

POSTED

DEADLINE

59--ROTOR POSITIONING U, IN REPAIR/MODIFICATION OF

Solicitation # N0038326RBA39

The contract solicitation for NSN 7R-5990-014606390-V2, titled "59--ROTOR POSITIONING U, IN REPAIR/MODIFICATION OF," requires the procurement of 34 units with delivery terms FOB origin. This item is flight critical and subject to strict Government source approval due to the unique design capabilities, proprietary engineering knowledge, and specialized manufacturing or repair expertise held exclusively by previously approved sources. Technical data and manufacturing processes essential to maintaining the part’s integrity are not economically available to the Government, and acquisition from alternate sources is prohibited unless they successfully qualify through formal procedures approved by the cognizant Government engineering activity. Only sources previously sanctioned by the Government have been solicited, and new sources must submit comprehensive documentation per NAVSUP WSS Source Approval Information Brochures to be considered. Proposals lacking complete required information or evidence of prior submission will be deemed nonresponsive. The Government has determined that commercial item acquisition policies under FAR Part 12 do not apply, and the timeline for new source qualification is insufficient to delay award. Offers must be submitted by the deadline of September 15, 2026, and award may proceed based on critical Fleet support needs if approval cannot be secured in time. All technical specifications and standards referenced can be accessed via ASSIST-Online or the DODSSP, while inquiries are to be directed to the designated point of contact at NAVSUP Weapon Systems Support in Philadelphia, PA.

Navsup Weapon Systems Support

POSTED

DEADLINE

in about 1 month

Emergency Repairs and System TroubleshootingThe contract titled Emergency Repairs and System Troubleshooting requires on-call response to critical system failures including leaks, pressure issues, and contamination alerts, with duties encompassing diagnostics, parts replacement, and full service restoration to ensure operational continuity. Contractors must be prepared to respond promptly to emergencies across the state of Texas under the jurisdiction of the Health and Human Services Commission, with services expected to maintain public health and safety standards through timely intervention and technical expertise. The solicitation is open for bids as a subcontract under NAICS code 811310, with a response deadline of August 14, 2026, at 4:30 PM Central Time. The opportunity is posted on the Texas SmartBuy portal, and while no set-aside provisions or specific organizational restrictions are noted, bidders must meet the technical and operational requirements to support emergency service delivery in accordance with state health and safety protocols. All work is to be performed within Texas, and contractors are expected to have the capability to mobilize quickly, possess appropriate certifications, and maintain inventory or access to specialized components necessary for rapid system repair.

Health and Human Services Commission

POSTED

DEADLINE

Routine Preventive Maintenance on Water Filtration UnitsThe contract outlines a routine preventive maintenance program for water filtration units, requiring scheduled inspections, filter replacements, system flushing, performance testing, and comprehensive recordkeeping to ensure the safe and uninterrupted operation of the systems. All tasks must be performed to maintain regulatory compliance and operational efficiency, with strict adherence to established protocols for documentation and service delivery. The work is scoped to support continuous water safety standards across facilities under the jurisdiction of the Health and Human Services Commission in Texas. This is a subcontract opportunity posted on July 31, 2026, with a response deadline of August 14, 2026, targeting service providers with expertise in water filtration system maintenance. The NAICS code 811310 indicates classification under other miscellaneous repair and maintenance services. The place of performance and point of contact details are unspecified, but the work is expected to occur within Texas under the oversight of the state agency. Interested parties must submit proposals through the designated portal prior to the deadline to be considered for award.

Health and Human Services Commission

POSTED

DEADLINE

Water Filtration System Maintenance and Repairs at San Angelo State Supported Living Center

Solicitation # HHS0017602

The Texas Health and Human Services Commission through its Procurement and Contracting Services division is soliciting competitive bids for as-needed maintenance and repairs to water filtration systems at the San Angelo State Supported Living Center. The solicitation, identified as HHS0017602, was posted on July 31, 2026, with responses due by August 14, 2026, at 4:30 PM Central Time. This contract opportunity is open to vendors capable of providing timely and reliable services to ensure the proper functioning of water filtration systems critical to the health and safety of residents at the facility. The place of performance is located in Texas, and all work must be performed at the specified site without exception. The contracting authority is the Health and Human Services Commission, operating under the state of Texas as a state-level government entity. Primary point of contact for inquiries regarding the solicitation is David Martinez, reachable via email at David.Martinez01@hhs.texas.gov or by phone at 512-406-2597. Additional details, including submission guidelines and requirements, can be accessed through the official procurement portal at the provided UI link. There is no set-aside designation specified for this solicitation, meaning it is open to all qualified vendors regardless of business size or ownership characteristics. Vendors are expected to respond with comprehensive proposals detailing their experience, service approach, response times, and pricing structure for both routine maintenance and emergency repairs within the specified timeframe.

Health and Human Services Commission

POSTED

DEADLINE

Warranty and Post-Delivery Service NetworkThe contract establishes a commitment to provide on-site warranty service and repair support for crawler tractors within Texas, ensuring compliance with the terms outlined in the contract warranty provisions. This includes timely deployment of qualified technicians to the location of the equipment to perform diagnostics, repairs, and maintenance as needed, with the goal of minimizing downtime and maintaining operational readiness for the equipment under warranty. The scope is strictly confined to Texas and requires adherence to specific service standards and response protocols defined in the warranty agreement. This subcontract is categorized under NAICS code 811310, which corresponds to industrial and commercial machinery and equipment repair and maintenance services. It was posted on July 31, 2026, with a response deadline of August 17, 2026, and is managed by the Comptroller of Public Accounts under the Texas agency structure. The place of performance and organizational details are unspecified, but the service must be conducted entirely within Texas. Interested parties are directed to the Texas SmartBuy portal for full solicitation details and submission requirements.

Comptroller of Public Accounts

POSTED

DEADLINE

Warranty and Field Service SupportThe contract seeks a contractor to provide warranty-backed repair, maintenance, and field service support for concrete saws used across Iowa DOT operations. This subcontract requires the vendor to deliver timely and reliable technical services to ensure the continued operational readiness of equipment, with all work backed by a warranty to guarantee quality and performance. Services must be performed across the state of Iowa, covering all necessary field locations where concrete saws are deployed for infrastructure projects. The contractor is expected to respond to service requests promptly, perform diagnostics and repairs, replace defective parts under warranty, and maintain detailed service records to meet Iowa DOT’s operational and compliance standards. The solicitation was posted on July 31, 2026, with responses due by August 21, 2026, and falls under NAICS code 811310 for commercial and industrial machinery and equipment repair and maintenance. The contract is structured as a subcontract, and while no set-aside provisions are specified, bidders must be prepared to meet all technical and logistical demands of supporting state-mandated infrastructure maintenance activities. The point of contact and exact performance locations are not listed, but services will be required statewide, and all work must align with Iowa DOT’s operational protocols. Interested parties can access additional details through the provided UI link on the Sciquest platform.

POSTED

DEADLINE

Warranty, Repair, and After-Sales Support ServicesHarris County is seeking a contractor to provide warranty service, repair, and technical support for less-lethal launchers and related equipment under a subcontract arrangement. The contract requires comprehensive after-sales support, including diagnostic evaluations, corrective maintenance, parts replacement, and technical assistance to ensure operational readiness and compliance with safety standards for law enforcement applications. All work must be performed in accordance with manufacturer specifications and industry best practices for non-lethal weaponry systems. The solicitation was posted on July 31, 2026, with responses due by August 17, 2026, and is classified under NAICS code 811310 for industrial and commercial machinery and equipment repair and maintenance. The place of performance and specific location details are not specified, but performance is expected to support Harris County’s operational needs in Texas. The contract is open to qualified subcontractors with demonstrated capability in servicing less-lethal systems and maintaining rigorous service protocols under tight timelines.

POSTED

DEADLINE

Performance Testing & Compliance Certification (Mechanical/Electrical Systems)The contract requires the execution of operational performance testing and inspections on installed mechanical and electrical systems to ensure they meet established functional and safety standards. A critical component of the scope is the generation of comprehensive compliance documentation, which must be formally certified by factory-authorized representatives to validate that all equipment has been tested and verified according to manufacturer specifications and regulatory requirements. This work must be performed on equipment already installed within Huntingdon County, Pennsylvania, with all testing and certification activities tied to the physical presence of the systems at their installed locations. Bidders must respond by August 17, 2026, and the contract is structured as a subcontract under NAICS code 811310, which corresponds to other commercial and industrial machinery and equipment repair and maintenance. The opportunity is posted by Huntingdon County through the Pennsylvania state procurement portal, and while no specific point of contact or set-aside details are provided, the emphasis on formal certification by factory-authorized personnel underscores the need for qualified and accredited service providers with direct ties to equipment manufacturers. Performance must align with industry best practices for documentation and compliance, with no flexibility in the requirement for third-party factory validation.

Huntingdon County

POSTED

DEADLINE

High voltage repair switch gears, high voltage repair for Richmond State Supported Living Center

Solicitation # HHS0017495V2

The contract solicitation, identified as HHS0017495V2, seeks proposals for high voltage repair switch gears and associated high voltage repair services at the Richmond State Supported Living Center in Texas. All activities and deadlines are governed by Central Time, with responses required by 10:30 AM on August 21, 2026, to be received via the Electronic State Bid Directory. An optional on-site visit is scheduled for August 6, 2026, at 10:00 AM to provide bidders with visibility into the worksite. Any questions or clarifications must be submitted by August 10, 2026, and responses to those inquiries will be published as an addendum on August 13, 2026. The anticipated contract start date is September 1, 2026. The solicitation is managed by the Texas Health and Human Services Commission, with Byron Wright serving as the primary point of contact, reachable via email and phone. The contract falls under the SLED category and can be accessed online through the provided TX SmartBuy portal.

Health and Human Services Commission

POSTED

DEADLINE

Truck-Mounted Attenuators (TMA) Supply and ServiceThe contract covers the provision, installation, maintenance, and repair of truck-mounted attenuators designed for work zone impact protection. It is classified as a subcontract under NAICS code 811310, indicating services related to automotive maintenance and repair, and is managed by FAS - Purchasing under the Washington agency office. The solicitation was posted on July 31, 2026, with a submission deadline of September 14, 2026, requiring vendors to deliver comprehensive support services for TMA units used in highway and roadway work zones. The scope demands reliable performance and compliance with safety standards for dynamic impact absorption, ensuring protection for workers and motorists. The place of performance and point of contact details are unspecified, but the work is expected to support federal or state transportation projects within the Washington region. All services must be performed in accordance with industry best practices and contractual obligations for responsive, timely maintenance and emergency repairs.

FAS - Purchasing

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Domestic Freight and Delivery LogisticsThe contract under the title Domestic Freight and Delivery Logistics involves the transportation of batteries from the contractor’s designated shipping point to two destination locations: Sacramento, CA and Wadesboro, NC, with all shipments governed by FOB Origin terms, meaning title and risk of loss transfer to the buyer at the point of origin. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, is classified under NAICS code 484220, indicating it pertains to specialized freight trucking services. The solicitation was posted on August 2, 2026, with proposals due by August 13, 2026, and the primary place of performance is listed as Wadesboro, NC, with a zip code of 28170-0000. The contract does not specify a set-aside type or organization type, and no point of contact information is provided in the data. Bidders must ensure compliance with FOB Origin requirements and be prepared to handle logistics to both specified locations under the terms outlined in the solicitation.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 4 hours ago

DEADLINE

Quality Inspection and Conformance TestingThe contract requires the performance of comprehensive quality inspections for both incoming and outgoing materials adhering strictly to MIL-STD-1916 or ASQ Z1.4 standards, with an absolute mandate for zero non-conformances. This includes systematic sampling procedures and the accurate documentation and reporting of any deviations or failures, ensuring full conformance to defense-grade quality requirements. The work is tied to a subcontract under the Defense Logistics Agency, part of the Department of Defense, with performance specifically located in Wadeboro, North Carolina, zip code 28170-0000. The solicitation, classified under NAICS code 541380, was posted on August 2, 2026, and responses are due by August 13, 2026, with no set-asides indicated. All inspection activities must be executed with precision to meet stringent military standards and maintain supply chain integrity for defense-related applications.

Testing Laboratories and Services

POSTED

about 4 hours ago

DEADLINE

Cybersecurity Compliance for Covered Defense Information (CDI)The contract requires the implementation of cybersecurity controls aligned with NIST SP 800-171 and compliance with DFARS 252.204-7012 to protect Covered Defense Information handled by the contractor. This includes establishing and maintaining a robust security framework to safeguard sensitive data within systems and networks, ensuring all required access controls, audit capabilities, media protection, personnel security, and system integrity measures are fully operational. The contractor must also be prepared to report any cyber incidents affecting Covered Defense Information in accordance with specified timelines and procedures outlined in the regulation. This subcontract is issued under the Department of Defense’s Defense Logistics Agency, with performance required at Wadeboro, North Carolina, under NAICS code 541512 for computer systems design services. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, and is open to eligible subcontractors participating in defense-related supply chains. Compliance is mandatory and subject to verification, with failure to meet requirements potentially resulting in contract termination, penalties, or loss of eligibility for future DoD work.

Computer Systems Design Services

POSTED

about 4 hours ago

DEADLINE

Military-Compliant Packaging and LabelingThe contract requires comprehensive packaging and labeling of batteries in strict compliance with MIL-STD-2073-1E, including adherence to Special Marking Code 32, which dictates specific identification and handling requirements for military-grade battery components. Additionally, all labeling must satisfy hazard communication standards under 29 CFR 1910.1200 and MIL-STD-129, ensuring accurate depiction of chemical hazards, handling instructions, and standardized barcoding for military logistics systems. This work is classified as a subcontract under NAICS code 493190 and is managed by the Defense Logistics Agency under the Department of Defense, with performance required at the facility located in Wadeboro, North Carolina, 28170-0000. All offerings must be submitted by the response deadline of August 13, 2026, after which no further considerations will be accepted.

Other Warehousing and Storage

POSTED

about 4 hours ago

DEADLINE

Sealed Lead Acid Battery Supply (Type I, 12-Month Shelf Life)The contract seeks the supply of commercial off-the-shelf sealed lead acid batteries classified as Type I, fully compliant with Defense Logistics Agency technical specifications and featuring a non-extendable 12-month shelf life from the date of manufacture. The batteries must be mercury-free except where mercury is functionally necessary, at which point secondary containment is required to ensure environmental and safety compliance. Performance is specified to occur at Wadeboro, North Carolina, with a zip code of 28170-0000, and the contract is structured as a subcontract under NAICS code 334416, categorizing it within battery manufacturing. The solicitation was posted on August 2, 2026, and response submissions are due by August 13, 2026, with no provision for extension. The issuing agency is the Defense Logistics Agency under the Department of Defense, and the contract is accessible via the DIBBS portal for eligible vendors seeking to respond.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 4 hours ago

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires the provision of packaging, preservation, and labeling services strictly in accordance with military standards MIL-STD-2073-1E and MIL-STD-129, ensuring all materials are prepared for long-term storage and transportation under Department of Defense specifications. This includes the application of Type I shelf-life marking to indicate product expiration and hazard communication labeling to convey safety information in compliance with federal regulations. All work must be performed to meet exacting military requirements for durability, traceability, and regulatory alignment. The contract is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with performance expected at Nellis Air Force Base, Nevada, 89191-7261. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026. The NAICS code 561910 identifies the industry as other support services, indicating the scope involves specialized logistics and handling support rather than manufacturing. Participation requires strict adherence to military documentation, labeling protocols, and quality control standards without deviation.

Packaging and Labeling Services

POSTED

about 4 hours ago

DEADLINE

Supply of Pneumatic Vehicular TiresThe contract involves the procurement and delivery of two military-spec pneumatic tires for vehicular use, governed by stringent engineering and regulatory standards. Compliance is mandatory for engineering source approval, adherence to RS023 Type I shelf-life requirements, and full adherence to DFARS packaging and labeling protocols to ensure suitability for defense operations. The tires must meet exacting performance and durability benchmarks appropriate for military applications, with all packaging and documentation strictly aligned with federal acquisition regulations governing defense logistics. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, is classified as a subcontract with a NAICS code of 326211, indicating tire manufacturing for motor vehicles. Performance is required at Nellis Air Force Base, Nevada, with a response deadline of August 13, 2026. The contract is not subject to a specific small business set-aside, and all submissions must be made through the designated DIBBS portal to be considered valid. Failure to meet any technical, packaging, or labeling requirement will result in disqualification.

Tire Manufacturing (except Retreading)

POSTED

about 4 hours ago

DEADLINE

Inspection and Quality Assurance SupportThis contract requires the execution of rigorous quality inspection services in strict adherence to MIL-STD-1916 or ASQ H1331 standards, utilizing AQL-based sampling methods to guarantee zero non-conformances for all critical product attributes. The scope demands an uncompromising focus on defect prevention and process control, ensuring that every inspected item meets the highest levels of reliability and performance required by defense specifications. The work is positioned as a subcontract under the Defense Logistics Agency, part of the Department of Defense, with performance based in Johnston, Iowa, at ZIP code 50131-0000. The solicitation, identified under NAICS code 541330 for engineering services, was posted on August 2, 2026, with a response deadline of August 13, 2026. All proposals must align with the stringent quality expectations and demonstrate capability to deliver inspection outcomes that support mission-critical defense systems without exception.

Engineering Services

POSTED

about 4 hours ago

DEADLINE

Packaging and Labeling Compliance SpecialistThe contract requires strict adherence to U.S. government packaging and labeling standards for lamps, specifically compliance with MIL-STD-129, FED-STD-313, and DLA RP001 to ensure alignment with Defense Logistics Agency logistics protocols. This subcontract involves ensuring all packaging materials, labeling formats, barcoding, and documentation satisfy the rigorous military supply chain requirements for traceability, durability, and uniformity across federal distribution networks. The work must be executed in accordance with DLA specifications to guarantee seamless integration into the Department of Defense’s inventory and deployment systems. The position is titled Packaging and Labeling Compliance Specialist and is classified under NAICS code 541620, indicating it falls within the Management Consulting Services category. The solicitation was posted on August 2, 2026, with a mandatory response deadline of August 13, 2026. Performance is required to take place in Johnston, Iowa, with a zip code of 50131-0000. The contract is issued by the Defense Logistics Agency under the Department of Defense and is accessible via the DIBBS platform with the reference number SPE8E726T3449. There is no set-aside designation specified, and the solicitation is open to qualified subcontractors capable of meeting federal military standards without deviation.

Environmental Consulting Services

POSTED

about 4 hours ago

DEADLINE

Hazardous Materials Compliance & Documentation SupportThe contract seeks specialized support for regulatory compliance related to hazardous materials, focusing on the accurate preparation of hazard labels and Material Safety Data Sheets in adherence to OSHA and Defense Logistics Agency standards. This work is critical to ensuring safe handling, storage, and transportation of hazardous substances across military and defense operations, with all documentation required to meet federal safety and disclosure mandates. The contract is structured as a subcontract under NAICS code 541690, which covers other scientific and technical consulting services, and performance is designated to take place in Johnston, Iowa, with a 50131-0000 ZIP code. The opportunity was posted on August 2, 2026, with responses due by August 13, 2026, and is managed by the Department of Defense through the Defense Logistics Agency. No specific set-aside designation or point of contact is listed, and the procuring office is accessible via the DIBBS platform.

Other Scientific and Technical Consulting Services

POSTED

about 4 hours ago

DEADLINE

Incandescent Lamp Supplier / ManufacturerThe contract seeks a supplier or manufacturer to produce or provide a single incandescent lamp identified by NSN 6240-00-941-2701, fully compliant with applicable military specifications. The item must be properly packaged and labeled according to government standards and delivered within a strict 20-day window from award. The work is classified as a subcontract under NAICS code 335139, and the procurement is managed by the Defense Logistics Agency on behalf of the Department of Defense. Performance is required at the specified location in Johnston, Iowa, with a zip code of 50131-0000. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026, with no set-aside designation applied. All submissions must adhere to the requirements detailed in the official DIBBS solicitation linked under reference number SPE8E726T3449.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

Military Packaging and Marking (MIL-STD-2073-1E)The contract requires the packaging, preservation, and marking of a valve in strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards to ensure readiness for shipment to a naval vessel. All materials and procedures must meet defense-grade specifications for environmental protection, durability during transport, and clear identification to support logistics operations within the military supply chain. The valve must be properly preserved against corrosion, sealed to prevent contamination, and labeled with standardized markings that include required data elements such as part numbers, lot codes, and handling instructions as prescribed by the referenced military standards. The contract is issued as a subcontract under the Defense Logistics Agency, a component of the Department of Defense, with a place of performance listed as FPO with zip code 09582, indicating delivery to a U.S. military installation, likely overseas or aboard a vessel. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, leaving a narrow window for submission. The NAICS code 488999 classifies this work under other support activities for air and water transportation, reflecting the specialized logistics nature of the task. Participation requires proven experience in military packaging and an understanding of the strict compliance expectations inherent in defense contracting for naval systems.

All Other Support Activities for Transportation

POSTED

about 4 hours ago

DEADLINE