Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Warranty and Preventive Maintenance Support

Active

Federal

Response Deadline08/12/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract provides extended warranty coverage, remote diagnostics, and scheduled preventive maintenance services for a machine over a period of one to three years, ensuring continuous operational reliability and proactive issue resolution. Services include timely remote troubleshooting to minimize downtime and routine maintenance visits to preserve performance, reduce unexpected failures, and extend the machine’s service life. The solicitation is classified as a subcontract under NAICS code 811310, targeted for performance at Aberdeen Proving Ground, Maryland, with a posted date of August 7, 2026, and a response deadline of August 12, 2026. The contracting entity is the Department of Defense through its W6QK Acc-Apg Adelphi office, indicating the work supports military or defense-related equipment maintenance requirements. Only eligible subcontractors responding by the deadline will be considered for award.

General Info

Extended warranty, remote diagnostics, and preventive maintenance for military equipment at Aberdeen Proving Ground, 1–3 years.

Agency

Department Of Defense → W6QK Acc-Apg AdelphiView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

Aberdeen Proving Ground, MD, 21005, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Response DeadlineAug 12

Submission deadline

Response Deadline

08/12/2026, 03:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc-Apg Adelphi

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W6QK Acc-Apg Adelphi

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Extended warranty, remote diagnostics, and scheduled preventive maintenance services for the machine over 1–3 years.

Similar Contracts

Same NAICS industry code

Transformer Repair-Remanufacture

Solicitation # 26048

The City of Independence, Missouri, through its Power & Light Department, is seeking qualified contractors to perform repairs and, if necessary, scraping of electrical transformers and related equipment. The scope of work includes providing all materials, equipment, tools, labor, transportation, and supervision required to complete the work in accordance with the specified agreement documents. All bids must be submitted electronically through the PublicPurchase platform at www.publicpurchase.com; paper, fax, or email submissions will not be accepted and will not be returned. The solicitation number is 26048, with a response deadline of August 20, 2026, at 7:00 PM. A virtual bid opening will be held via Microsoft Teams using the provided link, meeting ID, and passcode, with a phone dial-in option available for those unable to join online. Questions about the bid must be submitted through the PublicPurchase website, and all communication will be handled through this portal. The primary point of contact for inquiries is Richelieu Sese, reachable at (816) 325-7090 or rsese@indepmo.org. Work performance is expected to occur within the City of Independence, Missouri.

City of Independence

POSTED

about 19 hours ago

DEADLINE

363-27 District 2 Electrical Maintenance

Solicitation # SRC0000041115

The contract titled 363-27 District 2 Electrical Maintenance is a solicitation issued by the Ohio Department of Transportation, District 2, for the provision of electrical equipment maintenance and repair services. It was posted on August 7, 2026, with a response deadline of August 27, 2026, at 5:00 PM. The services are to be performed within the state of Ohio and are intended to support the ongoing operational needs of transportation infrastructure under the jurisdiction of District 2. This solicitation is categorized under SLED, indicating it is targeted toward state, local, or educational entities, and no specific set-aside or NAICS code is designated, leaving eligibility open to qualified contractors without restriction based on small business or other program categories. All proposals must be submitted through the Ohio Buys portal before the deadline to be considered for award.

Odot-district 2, Dot-dept Of Transportation

POSTED

about 23 hours ago

DEADLINE

Equipment Maintenance and Refueling ServicesThe contract entails ongoing maintenance, refueling, and recovery services for all heavy equipment rented during the performance period, ensuring continuous operational readiness and support. Services are required to be performed at the designated place of performance in Cristobal and are intended to sustain the functionality and availability of equipment under contract. The work is classified under NAICS code 811310, which pertains to mechanical repair and maintenance activities, and the contract is structured as a subcontract within the Department of Defense procurement framework. The solicitation was posted on August 7, 2026, with a response deadline of August 20, 2026, at 4:00 p.m. The contracting office is identified as 0410 Aq Hq Contract under the Department of Defense, though specific contact information and detailed agency office details are not provided. All bidders must be prepared to meet service requirements without specified set-aside classifications, and the contract will be managed through the SAM.gov platform with the designated UI link for further submission and reference.

0410 Aq Hq Contract

POSTED

DEADLINE

Emergency DME Repair Services (24/7)The contract is for emergency repair services on critical DME equipment outside normal business hours, requiring rapid diagnostics and either on-site or mobile response capabilities. It is a subcontract under a Small Business Set Aside designation, limiting eligibility to qualified small businesses as defined by the SBA. The North American Industry Classification System code 811310 applies, indicating the work falls within medical and dental equipment repair and maintenance. The services must be available 24 hours a day, seven days a week, to ensure uninterrupted operation of vital medical devices for the Department of Veterans Affairs. Performance is designated for Pittsburgh, Pennsylvania, with a zip code of 15215, and the solicitation was posted on August 7, 2026, with responses due by September 8, 2026. The contracting office is the 244-NETWORK Contract Office 4 under the Department of Veterans Affairs, though no specific point of contact or detailed address information is provided.

244-NETWORK Contract Office 4 (36C244)

POSTED

DEADLINE

in about 1 month

DME Repair & Maintenance ServicesThe contract seeks qualified small businesses to provide repair and maintenance services for wheelchairs and other durable medical equipment, ensuring all items are restored to first-class condition through thorough cleaning, functional testing, and recertification for safe reuse. The work must meet stringent standards to guarantee equipment reliability and patient safety, with all repairs performed in accordance with established medical device protocols. This is a Small Business Set Aside under NAICS code 811310, exclusively available to businesses certified as small by the SBA. Performance is required at a designated location in Pittsburgh with a zip code of 15215, and responses must be submitted by September 8, 2026. The contract is administered by the Department of Veterans Affairs through its 244-NETWORK Contract Office 4, and while no specific point of contact is listed, interested parties can access additional details via the provided SAM.gov link. The solicitation is structured as a subcontract, indicating it may be awarded as part of a larger federal procurement initiative, with the expectation that successful vendors will deliver consistent, high-quality service to support veteran healthcare needs.

244-NETWORK Contract Office 4 (36C244)

POSTED

DEADLINE

in about 1 month

Technical Support and Commissioning ServicesThe contract encompasses on-site installation support, commissioning, and training services for ship engineers aboard the USNS COMFORT, specifically focused on the operation and maintenance of Edro laundry units. Technical personnel will be required to deploy to the vessel to oversee the proper setup, functional verification, and handover of the equipment, ensuring full operational readiness. Comprehensive training will be provided to the ship’s engineering crew to enable them to independently perform routine operation, preventive maintenance, troubleshooting, and minor repairs of the laundry systems in accordance with manufacturer specifications and naval operational standards. This subcontract, issued under NAICS code 811310 and managed by the Department of Defense through Mschq Norfolk, mandates timely execution with a response deadline of August 12, 2026. Performance is to be completed at the vessel’s designated location, identified by the address code 53470, and must align with the specific technical and safety requirements of a U.S. Navy hospital ship environment. The scope emphasizes hands-on, practical instruction tailored to military personnel, ensuring sustained mission capability without reliance on external technical support after commissioning.

POSTED

DEADLINE

Equipment Integration, Testing, and DeliveryThe contract involves the final assembly, hydraulic and PTO integration, operational testing, and delivery of a complete equipment package to Byron, Georgia, with requirements for on-site setup and verification to ensure full functionality. All work must be completed and validated at the specified delivery location, emphasizing precision in integration and rigorous testing to meet operational standards. The procurement is structured as a subcontract under NAICS code 811310, associated with the USDA ARS AFM APD agency, and targets a specific technical scope requiring specialized expertise in equipment integration and field deployment. Responses to this solicitation are due by August 17, 2026, at 7:00 PM, with the posting date listed as August 7, 2026. The place of performance is strictly limited to Byron, GA, with a zip code of 31008, and no alternative delivery or setup locations are authorized. While no set-aside type or point of contact is provided, the nature of the work implies a need for qualified subcontractors with demonstrated capabilities in agricultural equipment systems, hydraulic integration, and post-installation verification under field conditions. Failure to meet the specified integration and testing criteria may result in rejection or non-compliance.

USDA Ars Afm Apd

POSTED

DEADLINE

Emergency Repair Services for Dental EquipmentThe contract requires the provider to deliver on-site emergency repair services for dental equipment during standard business hours, encompassing full diagnosis, prompt repair, and thorough documentation in strict adherence to federal regulatory standards. All services must be performed promptly to ensure minimal disruption to dental operations, with a focus on maintaining equipment functionality and patient care continuity. The work is to be carried out at a location identified by the zip code 57570, and the contractor must comply with all applicable federal requirements for medical equipment maintenance and service reporting. This is a subcontract under the Indian Health Service, part of the Department of Health and Human Services, with a NAICS code of 811310 indicating the industry classification for medical and dental equipment repair and maintenance. The opportunity was posted on August 7, 2026, and responses are due by August 21, 2026, with no set-aside provisions specified. The contract does not include a designated point of contact, and all inquiries or submissions must follow the procedures outlined through the official SAM.gov portal linked in the posting.

Indian Health Service

POSTED

DEADLINE

Preventive Maintenance of Dental EquipmentThe contract requires annual preventive maintenance of all dental equipment at Rosebud Hospital, including dental chairs, delivery systems, assistant instrumentation, LED lights, air compressors, and vacuum systems. Work must strictly adhere to manufacturer specifications and established usage thresholds to ensure optimal performance, safety, and longevity of the equipment. The services are critical to maintaining operational readiness and compliance with healthcare standards in a facility serving Native American communities under the Indian Health Service. All maintenance activities are to be scheduled and completed in accordance with industry best practices and documented to demonstrate compliance. The contract is categorized under NAICS code 811310 for medical and dental equipment repair and maintenance and is structured as a subcontract under the Department of Health and Human Services. It was posted on August 7, 2026, with a response deadline of August 21, 2026. The place of performance is designated by the zip code 57570, which corresponds to the location of Rosebud Hospital. No set-aside provisions or specific organizational requirements are indicated, and while point of contact information is not provided, all proposals must meet the outlined technical and temporal requirements to be considered.

Indian Health Service

POSTED

DEADLINE

Emergency Generator Preventive Maintenance ServicesThe contract seeks preventive maintenance services for diesel-powered emergency generators, including routine inspections, operational testing, and performance verification to ensure continued reliability and compliance with fuel and oil standards. Work is focused on maintaining critical backup power systems and must meet strict operational benchmarks to guarantee functionality during emergencies. The effort is designated as a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside under FAR 19.14, limiting eligibility to businesses owned and controlled by veterans with service-related disabilities. The solicitation is managed by the Department of Veterans Affairs through the 250-NETWORK Contract Office 10 and is performance-based at the Chillicothe location with a zip code of 45601. The opportunity was posted on August 7, 2026, with responses due by August 17, 2026. It is classified as a subcontract under NAICS code 811310, which covers machinery and equipment repair and maintenance. Bidders must be certified SDVOSBs and demonstrate capability to perform all required servicing tasks in compliance with applicable standards and safety protocols.

250-NETWORK Contract Office 10 (36C250)

POSTED

DEADLINE

Chiller Compressor Diagnostics and RepairThe contract requires the diagnosis and repair of confirmed compressor degradation on Chiller 1 using original equipment manufacturer tools and procedures. The scope focuses specifically on identifying the root cause of the degradation and performing necessary repairs, with the additional requirement to provide a detailed justification report if a major repair is determined to be essential. The work is to be performed at the facility located in Aurora, Colorado, with a zip code of 80011, and must comply with all technical and procedural standards expected by the Department of Defense through its office FA2543 460 Cons. The contracting vehicle is classified as a Small Business Set Aside, total, under NAICS code 811310, indicating it is reserved for small businesses to compete for the award. Proposals must be submitted by the deadline of August 13, 2026, at 6:00 PM Eastern Time, with the solicitation initially posted on August 7, 2026, and the contract is structured as a subcontract within the broader federal procurement framework.

FA2543 460 Cons

POSTED

DEADLINE

Compressed Air Dryer and Filtration System MaintenanceThe contract pertains to the semi-annual inspection and maintenance of refrigerated and desiccant dryers alongside inline filtration systems essential for compressed air operations, with tasks including drain functionality checks, purge system testing, replacement of filters, and continuous dew point monitoring to ensure system efficiency and air quality standards are met. Work is to be performed at the facility in Groton, Connecticut, with a zip code of 06349, under the sponsorship of the Naval Supply Systems Command Fleet Logistics Center Norfolk, a Department of Defense agency, and falls under the NAICS code 811310 for industrial and commercial machinery and equipment repair and maintenance services. The opportunity is classified as a subcontract and was posted on August 7, 2026, with a required response deadline of August 20, 2026, at 4:00 PM. No solicitation number has been assigned, and there is no set-aside designation indicated. The place of performance is specifically identified as Groton, though no city, state, or country information is provided for the contracting office address. Interested parties must submit proposals before the deadline to be considered for award, and failure to comply with maintenance specifications could result in non-performance or contract termination.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QK Acc-Apg Adelphi

Same awarding agency

Operator Training and Technical Knowledge TransferThe contract involves on-site training for government personnel at Aberdeen Proving Ground, Maryland, focused on the operation, maintenance, and programming of a Mill Turning Center. This is a subcontract under the Department of Defense, specifically managed by W6QK Acc-Apg Adelphi, with training activities to be conducted at the specified location. The solicitation is set for a response deadline of August 12, 2026, and is categorized under NAICS code 611430, indicating its alignment with professional and commercial training services. The training aims to transfer critical technical knowledge directly to government staff to ensure proficient and sustained use of the equipment. All activities are to be performed on-site, and there is no indication of remote or off-site alternatives. The contract does not specify a set-aside type or point of contact, and detailed application instructions are accessible via the provided SAM.gov link.

Professional and Management Development Training

POSTED

DEADLINE

Machine Calibration and Metrology ServicesThe contract pertains to post-installation calibration, alignment, and accuracy verification of precision machinery using laser interferometers and traceable measurement standards, ensuring compliance with rigorous metrological requirements. Services must be performed at Aberdeen Proving Ground, Maryland, with all procedures adhering to nationally recognized calibration protocols to maintain traceability and measurement integrity. The work is designated as a subcontract under NAICS code 541370, indicating it falls under specialized scientific and technical consulting services. The solicitation was posted on August 7, 2026, with responses due by August 12, 2026, and is managed by the Department of Defense through its W6QK Acc-Apg Adelphi office, underscoring its alignment with defense-related technical operations requiring high-precision instrumentation.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Precision Machine Installation and Rigging ServicesThe contract entails the transport, rigging, leveling, and mechanical installation of a Mill Turning Center at the Aberdeen Proving Ground facility operated by the Department of Defense. All work must be performed in accordance with precise technical and safety standards required for sensitive military equipment, ensuring the machine is fully operational and calibrated upon completion. The services are classified as a subcontract under NAICS code 238990, which covers other construction-related specialties, and the performance location is strictly limited to the specified government site in Maryland with a zip code of 21005. The solicitation was posted on August 7, 2026, with a firm response deadline of August 12, 2026, at 3:00 PM, indicating a tight window for qualified vendors to submit proposals. The contract is issued under the W6QK Acc-Apg Adelphi organization, and while no set-aside provisions are specified, bidders must demonstrate proven expertise in heavy machinery handling, precision installation, and compliance with federal defense contracting requirements. All work must meet rigorous quality controls and may require coordination with facility personnel to avoid operational disruptions.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Mill Turning Center Machine SupplyThe contract seeks the supply of a new or certified refurbished Mill Turning Center Machine designed to meet detailed government technical specifications for procurement by DEVCOM ARL under the Department of Defense. The machine must comply with all performance, durability, and operational requirements established for military-grade manufacturing and precision engineering applications. The procurement is classified as a subcontract under NAICS code 333517, indicating it falls within the category of metalworking machine tool manufacturing, and the place of performance is clearly designated as Aberdeen Proving Ground with a zip code of 21005, ensuring delivery and integration occur at this critical defense facility. The solicitation was posted on August 7, 2026, with a strict response deadline of August 12, 2026, at 3:00 PM, leaving a narrow window for interested parties to submit proposals. No set-aside designation is specified, meaning the opportunity is open to all qualified contractors without preference for small businesses or other categories. The contract is managed by the W6QK Acc-Apg Adelphi office, and while no point of contact is listed, the official SAM.gov link provides access to full documentation. Bidders must ensure their equipment meets exacting standards for integration into current DoD infrastructure and that certification, if using refurbished units, is verifiable and compliant with applicable federal acquisition regulations and military quality assurance protocols.

Machine Tool Manufacturing

POSTED

DEADLINE

Supply of OEM Spare Parts for Renishaw AM400 Additive Manufacturing MachineThe contract requires the supply of genuine original equipment manufacturer spare parts, wear components, and replacement sensors specifically designed for the Renishaw AM400 metal 3D printer, with all items must strictly adhere to the original technical specifications to ensure seamless integration and optimal performance. Compliance with a 12-month warranty is mandatory, guaranteeing reliability and durability of all provided components, minimizing downtime and maintaining production integrity for military-grade additive manufacturing operations. The solicitation is a subcontract under the Department of Defense, managed by W6QK Acc-Apg Adelphi, with performance required at Aberdeen Proving Ground, Maryland, 21005. The opportunity was posted on August 7, 2026, and responses are due by August 13, 2026, by 3:59 PM Eastern Time, with the NAICS code 333295 indicating classification under Other Industrial Machinery Manufacturing. All submissions must demonstrate proven capability to deliver authentic OEM parts, with no alternatives or aftermarket equivalents accepted, and full traceability to Renishaw’s original manufacturing standards is expected.

Semiconductor Machinery Manufacturing

POSTED

DEADLINE

INTENT TO SOLICIT ONLY ONE SOURCE: The Government requires a service and maintenance agreement with Renishaw, Inc. to maintain the Renishaw machine

Solicitation # W911QX26QA195

The U.S. Government is seeking to establish a sole-source service and maintenance agreement with Renishaw, Inc. to ensure ongoing operational support for Renishaw machines located at Aberdeen Proving Ground in Maryland. This requirement is exclusively targeted to Renishaw due to the specialized nature of the equipment and the need for manufacturer-specific expertise in servicing and maintaining its functionality. The solicitation, identified as W911QX26QA195, was posted on August 7, 2026, with a response deadline of August 13, 2026, at 3:59 PM Eastern Time. No set-aside provisions are applied, and the procurement falls under NAICS code 811210, which covers machinery and equipment repair and maintenance services. The contracting activity is managed by the Department of Defense through the W6QK Acc-Apg Adelphi office, located in Adelphi, Maryland. All inquiries and communications must be directed to Laurice Bocao, the primary point of contact, via email at laurice.l.bocao.civ@army.mil. The contract performance site is confirmed to be at Aberdeen Proving Ground, Maryland, with a ZIP code of 21005.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

INTENT TO SOLICIT ONLY ONE SOURCE: One (1) Benchtop Supercritical Carbon Dioxide (CO2) Reactor

Solicitation # W911QX26QA150

The U.S. Army is seeking to procure a single benchtop supercritical carbon dioxide (CO2) reactor through a sole-source acquisition under solicitation number W911QX26QA150, with no set-aside applied. The requirement is intended for research and development purposes and is associated with NAICS code 334516, which pertains to laboratory analytical instrument manufacturing. The solicitation was posted on August 7, 2026, and responses are due by 3:59 PM Eastern Time on August 13, 2026. The contract will be managed by the Office of W6QK Acc-Apg Adelphi within the Department of Defense, and the primary point of contact is Laurice Bocao, reachable via email at laurice.l.bocao.civ@army.mil. The equipment is required to be delivered and performed at Aberdeen Proving Ground in Maryland, with a ZIP code of 21005, while the contracting office is located in Adelphi, Maryland, 20783-1197. This acquisition is strictly for one source, indicating that no competitive bidding process will be conducted.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Sources Sought for Mill Turning Center Machine

Solicitation # W911QX26QA175

The U.S. Department of Defense, through the W6QK Acc-Apg Adelphi office, is seeking information from potential suppliers regarding the procurement of a Mill Turning Center Machine under solicitation number W911QX26QA175. This sources sought notice was posted on August 7, 2026, with responses due by August 12, 2026, at 3:00 PM Eastern Time. The effort falls under NAICS code 333517, which pertains to Metalworking Machinery Manufacturing, and no set-aside provisions are currently planned, meaning the opportunity is open to all eligible businesses regardless of size or status. The machine is intended for use at Aberdeen Proving Ground in Maryland, with performance located at the specific site in the 21005 zip code. Primary point of contact for inquiries is Deneise Jackson, reachable via email at deneise.c.jackson.civ@army.mil or by phone at 5206729583. All interested parties should submit responses through the SAM.gov platform using the provided UI link to ensure inclusion in the government’s evaluation process.

Machine Tool Manufacturing

POSTED

DEADLINE

Logistics & Delivery to Aberdeen Proving Ground

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

UL 752 Compliance Testing & Certification Services

Environmental Consulting Services

POSTED

DEADLINE

Corner Assembly Fabrication

Metal Window and Door Manufacturing

POSTED

DEADLINE

Mounting Assembly Fabrication (Floor/Ground)

Metal Window and Door Manufacturing

POSTED

DEADLINE