Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

WASHER, FLAT

Active
SPE4A6-27-T-7764Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A6-27-T-7764 is a request from the Defense Logistics Agency (DLA) Weapons Support ASC Commodities Division for the procurement of 21 flat washers, identified by NSN 5310-01-727-7668. The items are to be delivered to the NUWC Division Keyport in Washington state by October 26, 2026, with a required delivery window of 20 days after the order is placed. Shipping must be conducted via traceable means under FOB Origin terms. Inspection and acceptance will occur at the destination per FAR 52.246-2. This contract includes stringent regulatory and security requirements. Technical data is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA authorizations. Cybersecurity compliance is mandated through CMMC Level 2 and DFARS 252.204-7012. Packaging must adhere to ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. While not a small business set-aside, a price evaluation preference may be applied to certified HUBZone small business concerns.

General Info

DLA request for 21 flat washers delivered to NUWC Division Keyport by 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

610 DOWELL STREET, KEYPORT, WA, 98345-7610, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Office AddressUSA
Contacts
Mellisa Heise
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WASHER,FLAT
WASHER,FLAT
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5310-01-727-7668 Quantity: 21 EA Purchase Request: 7018894355QTY: 21 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
SLED
One (1) Year Contract - Nuts and Bolts
Solicitation # 348
The Jefferson Parish Government is soliciting bids for a one-year, as-needed contract to supply various nuts and bolts for the Eastbank Warehouse Department. The scope of work includes the procurement of domestic hex head bolts, T-head bolts, and hex nuts in multiple sizes and grades, including Grade 5, A325, and A449. A critical technical requirement for most items is a baked-on blue Teflon coating that meets the ASTM B117 testing standard for corrosion resistance. Additionally, T-head bolts must comply with ANSI/AWWA C111/A21.11-00 standards, and certain nuts must meet ASTM A194 specifications. Bidders must adhere to strict insurance requirements, including mandatory coverage for Worker's Compensation, Commercial General Liability, and Business Automobile Liability in accordance with Jefferson Parish Resolutions. The apparent low bidder is required to submit compliant insurance certificates within ten calendar days of the bid opening to avoid rejection. The Parish reserves the right to award the contract to the next lowest responsive and responsible bidder if these insurance obligations are not met. Responses to solicitation number 348 are due by November 10, 2026.
Jefferson Parish Government

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
Supply of Hexagon Cap Screws (NSN 5305-01-731-2843)This subcontract involves the supply of Hexagon Cap Screws, specifically NSN 5305-01-731-2843, to support prime contractors for DLA Aviation supply contracts. The items must be sourced according to the DLA Master List of Technical and Quality Requirements, with a strict prohibition on the use of additive manufacturing. All deliverables must be shipped to the Electric Boat Corporation in North Stonington, Connecticut, with packaging and quality control adhering to MIL-STD-129, MIL-STD-2073-1E, and either MIL-STD-1916 or ASQ H1331 standards. To be eligible for this contract, providers must maintain JCP certification and ensure full compliance with ITAR, EAR, and NIST SP 800-171 regulations. The procurement is managed by the Department of Defense under the ASC Commodities Division and falls under NAICS code 332722. Interested parties must meet the response deadline of November 4, 2026.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
Specialized Fasteners and Hardware SupplyThis subcontract involves the procurement of nuts, bolts, screws, and specialized fasteners to support prime contractors delivering installation kits for the DLA Weapons Support Land Supply Chain. All provided hardware must strictly adhere to the grade and material standards specified in the TDP Rev B Gen 2 reference drawings. Due to the critical nature of the components, the supplier is required to maintain quality certification for aerospace and defense grade fasteners to ensure all deliveries are fully certified. Managed by the Department of Defense under NAICS code 332722, the contract was posted on October 30, 2026, with a response deadline of December 1, 2026. Performance for this requirement is centered in the 17070-5002 zip code area. Interested parties can find further details through the DLA Weapons Support Land Supply Chain procurement portal.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
Manufacturer of Specialized Machine Screws (NSN 5305-01-532-7643)This subcontract opportunity with the Department of Defense ASC Commodities Division involves the precision manufacture of machine screws under NSN 5305-01-532-7643. The selected provider must produce ten screws per unit in strict accordance with the DLA Master List of Technical and Quality Requirements RA001. Deliverables include the physical hardware and a formal Certificate of Quality Compliance, with performance based in New Cumberland. To be eligible, manufacturers must hold SAE AS9003 or ISO 9001 certification and maintain US/Canada JCP certification. Additionally, the contract mandates strict cybersecurity adherence through CMMC Level 2 and NIST SP 800-171 compliance. Interested parties must submit their responses by November 4, 2026.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
BOLT, EYE
Solicitation # SPE4A6-27-T-5815
Solicitation SPE4A6-27-T-5815 is a Request for Quotation issued by the DLA Weapons Support ASC Commodities Division for the procurement of four eye bolts (NSN 5306-00-159-5362). Designated as critical application items, the bolts must be manufactured according to basic drawing NR 80064 2584025 Revision J and reference drawing NR OMLM6 2584542 Revision AA. The required delivery date is August 18, 2027, with a need ship date of April 20, 2027, for delivery to DLA Distribution Albany in Georgia. This is not a small business set-aside, though a price evaluation preference is available for SBA-certified HUBZone concerns. The contract mandates strict quality and security compliance, requiring manufacturers to maintain an inspection system compliant with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the destination per FAR 52.246-2. Technical data is subject to ITAR or EAR export controls, and contractors must meet CMMC Level 2 and DFARS 252.204-7012 cybersecurity standards for safeguarding covered defense information. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA requirement RP001. Additionally, the government will not evaluate or award offers involving items produced via additive manufacturing. Invoicing and receiving reports must be processed electronically through Wide Area WorkFlow.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAG
Solicitation # SPE4A6-27-T-6305
Solicitation SPE4A6-27-T-6305 is a fixed-price request for quotation issued by the DLA Weapons Support ASC Commodities Division for the procurement of 22 self-locking hexagon nuts. The required items are identified by NSN 5310-00-894-4990, with Meggitt Aircraft Braking Systems Corp part number GYN165, for which SPS Technologies is listed as an acceptable source. The procurement falls under NAICS code 332722 and is not a small business set-aside, though a HUBZone price evaluation preference may be applied. Delivery is required within five days after receipt of order to the W6TF Aviation Flight Company at Fort Bragg, North Carolina. The contract mandates strict adherence to DLA packaging requirements RP001 and marking standard MIL-STD-129, with additional hazard labeling required per 29 CFR 1910.1200 for any hazardous materials. Quality assurance involves destination inspection under FAR 52.246-2, utilizing zero-based sampling plans such as MIL-STD-1916 or ASO H1331. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and the successful contractor must utilize the Wide Area Workflow (WAWF) system for invoicing and payment. Key regulatory compliance includes the Buy American Act, Berry Amendment, and various DFARS cybersecurity and telecommunications restrictions.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, PLATE
Solicitation # SPE4A6-27-T-6249
Solicitation SPE4A6-27-T-6249 is a fixed-price request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of self-locking plate nuts (NSN 5310015971830). The requirement is divided into three delivery locations: DLA Distribution Barstow, DLA Distribution Albany, and DLA Distribution New Cumberland, with a total combined quantity of 1,503 units. Delivery is specified as FOB Origin under the First Destination Transportation program, with a general delivery lead time of 220 days and required delivery dates extending through October and November 2027. The items are classified as critical application commercial hardware and must be manufactured in accordance with the current revision of the applicable part standards, specifically referencing MIL-DTL-45913/1B(3) and MIL-DTL-45913E. Quality assurance requires a manufacturer's inspection system complying with SAE AS9003 or ISO 9001, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N, with palletization following DLA requirement RP001. This procurement is not a small business set-aside, although a price evaluation preference is available for HUBZone Small Business Concerns. Offerors must comply with the Buy American Act and Berry Amendment restrictions and represent that they will not provide covered telecommunications equipment. All quotes must be submitted electronically via the DIBBS portal, and successful contractors will be required to use the Wide Area WorkFlow system for invoicing and payment.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-27-T-6088
Solicitation SPE4A6-27-T-6088 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of 48 socket head cap screws, identified by NSN 5305-01-597-3671. This is not a small business set-aside, though a price evaluation preference is available for certified HUBZone small business concerns. The procurement is managed under the First Destination Transportation program, with a need ship date of April 20, 2027, and an original required delivery date of July 27, 2027. Delivery is to be made to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and safety standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Mercury or mercury compounds are strictly prohibited in all packaging and preservation. Due to the nature of the technical data, this procurement is subject to ITAR and EAR export controls per DFARS 252.225-7048, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA export-control training. Additionally, offerors must comply with the Buy American Act and Berry Amendment restrictions, and provide disclosure for any non-domestic materials used. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and the DIBBS system for quote submission. Inspection and acceptance will occur at the destination based on zero-non-conformance sampling plans. The solicitation also incorporates cybersecurity requirements, including DFARS 252.204-7012 and CMMC Level 2 standards, and prohibits the use of covered telecommunications equipment.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A6-27-T-6430
Solicitation SPE4A6-27-T-6430 is a fixed-price request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of close tolerance screws, identified as NSN 5305008284612 and part number NAS1152E4. This is a critical application commercial item. The requirement is for 86 packages, with each package consisting of 50 pieces. Delivery is required by March 21, 2027, with a need ship date of April 6, 2027, shipped FOB Origin to DLA Distribution Warner Robins in Georgia. The contractor must adhere to strict quality and technical standards, including TDP Rev A Gen 1 and the current revision of the applicable part standard. Key requirements include a mandatory Certificate of Quality Compliance (Mill-Material Certification) with every shipment and dimensional conformance inspection for Class 3A and 3B threads per System 22 of FED-STD-H28/20. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with zero non-conformances required for acceptance. Packaging and marking must comply with MIL-STD-129, MIL-STD-130N, and ASTM D3951, with DLA Master List requirements taking precedence. This solicitation is not a small business set-aside, though a price evaluation preference is available for certified HUBZone small businesses. Offerors must comply with the Buy American Act, the Berry Amendment, and various cybersecurity regulations, including DFARS 252.204-7012 for safeguarding covered defense information. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and the use of additive manufacturing is prohibited unless specifically authorized. Invoicing and receiving reports are to be processed electronically through the Wide Area WorkFlow (WAWF) system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-27-T-6071
Solicitation SPE4A6-27-T-6071, issued by the DLA Weapons Support ASC Commodities Division on October 23, 2026, is a request for quotations for nine hexagon head cap screws, part number MS90725-113 (NSN 5305013258388). The items must be manufactured in accordance with NASM90725 Revision 04 and delivered to DLA Distribution Albany, Georgia. The required delivery date is June 22, 2027, with a need ship date of April 20, 2027. This is not a small business set-aside procurement and falls under NAICS code 332722. The contract mandates strict quality and environmental standards, including a total prohibition of mercury or mercury compounds in the hardware, preservation, and packaging. Inspection and acceptance will occur at the destination, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA requirement RP001. Shipping is designated as FOB Origin. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic sourcing, and the Buy American Act.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
WASHER, KEY
Solicitation # SPE4A6-27-T-5979
Solicitation SPE4A6-27-T-5979 is a Request for Quotations issued by the Defense Logistics Agency Weapons Support ASC Commodities Division for the procurement of 16 key washers, identified by NSN 5310-01-066-3928. These items are designated as critical application items and must be manufactured according to specific technical drawings, including Basic Drawing 19207 12274522 Revision F. The delivery is required within 264 days after order, with a need ship date of July 22, 2027, and delivery to DLA Distribution San Joaquin in Tracy, California. This is not a small business set-aside, though a price evaluation preference is available for certified HUBZone small business concerns. The contract mandates strict adherence to quality and technical standards, incorporating the DLA Master List of Technical and Quality Requirements and requiring sampling per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various DFARS and FAR clauses regarding cybersecurity, the Buy American Act, and the Berry Amendment. Inspection and acceptance will occur at the destination per FAR 52.246-2.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-27-T-6265
Solicitation SPE4A6-27-T-6265, issued by the DLA Weapons Support ASC Commodities Division, is a fixed-price request for quotations for 261,000 machine screws, part number NAS1218-06E5 (NSN 5305011303257). This item is designated as a critical application item and must be manufactured in accordance with the current revision of the NAS1218 non-government standard. The procurement is not a small business set-aside, though a price evaluation preference is available for certified HUBZone Small Business Concerns. Offers involving additive manufacturing are prohibited. The contract mandates strict quality and inspection standards, requiring manufacturer compliance with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the destination, with sampling conducted per MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Packaging must adhere to ASTM D3951 and RP001, with labeling following MIL-STD-129 and MIL-STD-130N. Delivery is required within 206 days, with a need ship date of May 25, 2027, and a final delivery destination of DLA Distribution Jacksonville, Florida. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 335999
New
DIBBS
Manufacturer of Special Purpose Electrical Cable Assemblies (NSN 6150-01-496-6576)This subcontract opportunity, issued by the DLA Weapons Support ASC Commodities Division for the Department of Defense, seeks a manufacturer to provide 70 special purpose electrical cable assemblies annually. The selected contractor will be responsible for the fabrication, assembly, and testing of units according to NSN 6150-01-496-6576 specifications. Strict adherence to military standards is required, specifically MIL-STD-2073-1E and SPI# AM12476747 for packaging, and MIL-STD-129 for marking. The contract is designated as a total small business set-aside under NAICS code 335999. Eligible bidders must possess a valid CAGE code and demonstrate full compliance with DFARS 252.204-7016. Interested parties must submit their responses by November 10, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 9 days
View Details
NAICS: 423840
New
DIBBS
Authorized Distributor - Dome Light (NSN 6220-01-016-4888)This subcontract involves serving as an authorized distributor of dome lights, specifically NSN 6220-01-016-4888, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The selected provider is responsible for sourcing hardware from approved manufacturers and ensuring strict supply chain traceability documentation is maintained and delivered with all hardware. Shipping is managed on an FOB Origin basis to destinations within the continental United States. To qualify for this role, the contractor must hold eJCP certification and maintain CMMC Level 2 compliance to ensure the secure handling of controlled data. The opportunity is categorized under NAICS code 423840 and is managed by the Department of Defense. Interested parties must adhere to the specified response deadline of November 9, 2026.
Industrial Supplies Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 334516
New
DIBBS
OEM Manufacturer - Dome Light (NSN 6220-01-016-4888)This subcontract opportunity is for an OEM manufacturer to produce dome lights meeting NSN 6220-01-016-4888 specifications for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The selected provider will be responsible for delivering completed and warranted lighting units that adhere to strict quality sampling standards per MIL-STD-1916 or ASQ H1331, with packaging and marking requirements governed by MIL-STD-2073-1E and MIL-STD-129 respectively. To be eligible for this project, manufacturers must hold eJCP certification and maintain CMMC Level 2 compliance. The contract falls under NAICS code 334516 and was posted on October 30, 2026, with a response deadline of November 9, 2026.
Analytical Laboratory Instrument Manufacturing

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 488510
New
DIBBS
International Freight Forwarding (US to Taiwan)This subcontract opportunity is for international freight forwarding services supporting prime contractors on DLA Weapons Support ASC projects. The selected provider will coordinate the transport of materials from various US origins to the Taiwan Army Zuo-Ying Ammunition Sub No. 127 located in Kaohsiung City. All shipments must be managed in strict accordance with DFARS 252.247-7023 and MIL-STD-129 marking requirements to ensure regulatory compliance. The contract is designated as a total small business set-aside under NAICS code 488510. Due to the nature of the defense materials involved, the contractor must possess ITAR export capabilities and maintain CMMC Level 2 certification for the handling of covered defense information. Responses for this Department of Defense requirement are due by November 6, 2026.
Freight Transportation Arrangement

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 423840
New
DIBBS
Supply of Pressure Transmitters (NSN 6620-01-346-9340)This subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, requires the supply of five warranted pressure transmitters. The contractor must provide genuine Ontic Engineering and Manufacturing parts, specifically part number 418-44044 under NSN 6620-01-346-9340. All deliverables must adhere to MIL-STD-1916 or ASQ H1331 inspection standards and follow MIL-STD-2073-1E packaging requirements. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 423840. To ensure security and quality control, the contractor is required to complete a CMMC Level 2 self-assessment and maintain traceability in accordance with DFARS 252.246-7007 and 252.246-7008. The response deadline for this requirement is November 6, 2026.
Industrial Supplies Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 334210
New
DIBBS
Supplier of STA-STA Phone Lines (NSN 5995-01-394-8641)This subcontract opportunity is for the supply of STA-STA phone line assemblies, specifically NSN 5995-01-394-8641, to support prime contractors fulfilling DLA supply contracts. The selected provider must source or manufacture components that meet all technical specifications and ensure packaging complies with RP001 DLA Packaging Requirements for Procurement. The contract requires the delivery of 140 packaged units annually. Eligible bidders must possess a valid CAGE code and strictly adhere to prohibitions regarding foreign-sourced products. This is a Total Small Business Set-Aside under NAICS code 334210, managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division. The response deadline for this requirement is November 29, 2026.
Telephone Apparatus Manufacturing

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 541380
New
DIBBS
Bearing Testing and Inspection ServicesThis subcontract for Bearing Testing and Inspection Services supports the Department of Defense through the DLA Weapons Support ASC Commodities Division. The selected provider will perform specialized quality inspections and testing for prime contractors, ensuring strict adherence to DLA technical requirements and limited rights data. Key technical responsibilities include source inspection and the verification of MIL-DTL-197M preservation standards using precision measurement tools, hardness testers, and metrology equipment. To qualify, contractors must maintain ISO 9001:2015 certification and complete a CMMC Level 2 self-assessment. The primary deliverables for this engagement are detailed inspection reports and official test certificates. Interested parties must submit their responses by November 13, 2026, under NAICS code 541380.
Testing Laboratories and Services

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
Annular Ball Bearing ManufacturerThis subcontract involves the manufacture of precision annular ball bearings, specifically Part Number 3151-252, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The production process must strictly adhere to source-controlled requirements, limited rights data, and MIL-DTL-197M preservation standards. To qualify, the manufacturer must possess specialized precision bearing machining and grinding equipment and maintain ISO 9001:2015 certification along with a CMMC Level 2 self-assessment. The contract is categorized under NAICS code 332999 and requires finished bearings to be delivered FOB Destination. Interested parties should note the response deadline of November 13, 2026, for this Department of Defense requirement.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332410
New
DIBBS
Special Purpose Electrical Insulation Sleeving (Manufacturer/Supplier)This subcontract opportunity is issued by the Department of Defense DLA Weapons Support ASC Commodities Division for the manufacture or supply of special purpose electrical insulation sleeving. The contractor is required to provide 300 units of NSN 5970-01-074-2591, ensuring compliance with SAE AS85049F Revision F and QPL-AS85049-QPD standards. All deliverables must feature a 48-month extendable shelf life, with marking and packaging performed according to MIL-STD-129 and MIL-STD-2073-1E specifications. Eligible bidders must hold QPL/QML approved manufacturer status or be an authorized distributor. This procurement is designated as a Total Small Business Set-Aside under NAICS code 332410. Interested parties must submit their responses by the deadline of November 9, 2026.
Power Boiler and Heat Exchanger Manufacturing

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 488510
New
DIBBS
Military-Spec Packaging and Preservation ServicesThis subcontract for Military-Spec Packaging and Preservation Services supports the Department of Defense through the DLA Weapons Support ASC Commodities Division. The scope of work involves the specialized packaging, preservation, and marking of precision bearing cups for prime contractors. All activities must strictly adhere to military standards, specifically utilizing MIL-DTL-197M for packaging and preservation and MIL-STD-129 for shipment marking. The selected provider must employ labeling and marking equipment that complies with these military specifications to ensure all bearing cups are ready for FOB Destination shipment. This opportunity falls under NAICS code 488510, with a response deadline set for November 20, 2026.
Freight Transportation Arrangement

POSTED

2 days ago

DEADLINE

in 19 days
View Details
NAICS: 332991
New
DIBBS
Manufacturer of Tapered Roller Bearing Cups (NSN 3110-01-398-0704)This subcontract involves the manufacture of precision tapered roller bearing cups, identified by NSN 3110-01-398-0704, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The selected manufacturer must utilize precision machining equipment to fabricate components that strictly conform to Drawing 9235611, Revision H, and all associated Technical Data Packages. To be eligible, the provider must maintain ISO 9001:2015 certification and ensure full compliance with DFARS 252.225-7016 domestic sourcing requirements. The project falls under NAICS code 332991, with a response deadline set for November 20, 2026.
Ball and Roller Bearing Manufacturing

POSTED

2 days ago

DEADLINE

in 19 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 332722
Awarded
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-Q-0983
Defense Logistics Agency

POSTED

about 24 hours ago

DEADLINE

N/A
View Details
NAICS: 332722
Awarded
DIBBS
53--BOLT,SHEAR
Solicitation # SPE4A6-26-U-3976
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 332722
Awarded
DIBBS
NUT, SELF-LOCKING, EXTENDED WASHER, HEXAGON
Solicitation # SPE4A6-26-R-XD26
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS