Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

WASHER, SHOULDERED

Active
SPE4A6-26-T-06RPFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of three shouldered washers, identified by NSN 5310-01-298-1033, under solicitation number SPE4A6-26-T-06RP, with a response deadline of July 23, 2026, and a required delivery within five days after order. Technical and quality requirements referenced in the solicitation are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless a later amendment supersedes it. The item is subject to specific DLA packaging standards and must comply with requirements for the removal of government identification from non-accepted supplies, physical marking of bare items, and export control of technical data governed by ITAR or EAR regulations. Disclosure of technical data to foreign persons, including foreign nationals within the United States or overseas, is strictly controlled and requires prior authorization from the Department of State or Commerce. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and formal approval from DLA. DFARS 252.225-7048 applies to all technical data under this contract. The contract is issued by the Defense Logistics Agency's ASC Commodities Division under NAICS code 332722, with Lisa Harvie listed as the primary point of contact for inquiries.

General Info

Procure three shouldered washers NSN 5310-01-298-1033, deliver in five days, comply with DLA, ITAR, EAR, and export control requirements.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-06RP.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
LISA HARVIE
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WASHER,SHOULDERED
WASHER,SHOULDERED
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,
UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5310-01-298-1033 Quantity: 3 EA Purchase Request: 7017443933QTY: 3 Delivery: 5 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
SPRING, HELICAL, COMPThe contract pertains to the procurement of a single helical compression spring identified by NSN 5360-01-583-7314, with a required delivery within 20 days of award. The solicitation number is SPE7L1-26-T-837V, issued on July 15, 2026, with responses due by July 27, 2026, under the NAICS code 332722 for spring manufacturing. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which governs specifications referenced by R or I numbers, with applicable revisions determined by the solicitation or award date depending on the acquisition size. Strict prohibitions against intentional mercury or mercury-containing compounds in the spring or its direct contact surfaces are enforced, with narrow exceptions for functional uses in batteries, lighting, instruments, sensors, weapon systems, or specific chemical reagents approved by NAVSEA. Portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies, and delivery is to an FPO address with 09573 zip code. Primary point of contact is Kristina Derry of the Department of Defense’s Land Supply Chain, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEThe contract specifies the procurement of 1 unit pack (PG) of socket head cap screws, part number 90128A622, with a National Stock Number of 5305-01-569-2684, supplied by McMaster-Carr Supply Company. Each unit pack contains 25 individual screws, and the total quantity ordered is exactly one unit pack with no tolerance for variance. Delivery is required within five days of contract award, with shipment to be sent FOB origin via the fastest traceable means, explicitly prohibiting parcel post. The delivery destination is Puget Sound Naval Shipyard in Bremerton, WA, with specific military shipping and packaging instructions requiring compliance with MIL-STD-129 for labeling and packaging, ASTM D3951 for general packaging, and DLA’s overarching packaging requirements which override any conflicting standards. All items must be palletized according to DLA’s RP001 packaging directives and appropriately marked per government specifications. The contract mandates strict adherence to technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced via R and I numbers, with inspection governed by MIL-STD-1916 or an equivalent zero-based sampling plan. Acceptance criteria require zero non-conformances in the sample unless otherwise stipulated, with unspecified attributes treated as major and assigned an AQL of 1.0. The product must meet all identification, marking, and documentation standards, including the removal of government identification from non-accepted items. The required delivery date is July 10, 2026, and the contract is issued under solicitation SPE7M0-26-T-009A with inspection and acceptance occurring at the destination. All supply chain and logistical details are governed by Department of Defense protocols, and the point of contact for inquiries is Rocio Mino of the DLA Maritime Supply Chain ESOc Buys office.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract solicits 12,344 machine screws identified by NSN 5305-00-903-7712 under solicitation number SPE4A6-26-T-06QS, with a response deadline of July 23, 2026, and a required delivery within 10 days of award. The item is procured in accordance with a military or federal specification and is fully competitive, requiring compliance with all technical and quality standards referenced by R-numbered requirements in the DLA Master List of Technical and Quality Requirements, accessible via the DLA website. Packaging must meet DLA procurement standards, and any non-accepted supplies must have government identification removed prior to return. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contracting activity is the ASC Commodities Division, part of the Department of Defense. Primary point of contact is Alexander Sotos, reachable via email and phone. The solicitation was posted on July 15, 2026, and falls under NAICS code 332722, indicating classification within the Machine Shops and Turned Product manufacturing sector.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEADThe item is a metric hexagon cap screw specified as M10 x 1.5 x 50 mm, manufactured from low carbon steel per ASTM F568M Grade 10.9 and coated with zinc plating per ASTM B633 Type II, SC 1. It is defined by commercial standards, specifically ASME B18.2.3.1M, which has been superseded by ISO 4014 for partially threaded bolts; replacements must now reference ISO 4014 and may be sourced via AMC/AMSC code 1/G. The screw is classified as a commercial item and must be manufactured to the current revision of the governing part standard at the time of production. Although past revisions were acceptable, all items produced after the solicitation date must comply with the latest industry standard. Packaging and marking must adhere to DLA requirements including physical identification per RQ017 and removal of government identifiers from non-accepted supplies per RQ011. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs. The National Stock Number is 5305-01-418-1728 with a quantity of 872 units required under solicitation SPE4A6-26-T-06SR, issued by the Department of Defense, ASC Commodities Division. Delivery is due in 149 days after order award and will be performed at Barstow, CA 92311-5014. The solicitation was posted July 15, 2026, with responses due by July 23, 2026. Item Unique Identification is not required per the service customer's request, and DFARS 252.211-7003(c)(1)(i) applies. The procurement is fully competitive and governed by military and federal standards. Point of contact is Ashley JONES-TURNER at DLA, with email and phone provided for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThis contract specifies the procurement of 2 machine screws with the NSN 5305-01-728-2875 and part number 11549348, supplied by DANA INCORPORATED and GENERAL MOTORS LLC as commercial off-the-shelf items certified for critical applications. The screws must comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specification standards, including ASTM D3951. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. Packaging must adhere to MIL-STD-129 labeling and DLA Packaging Requirements, with all units packed per ASTM D3951 and palletized according to RP001 guidelines. The unit of issue is individual, with a fixed quantity of 2 units and no variance allowed. Delivery is required FOB origin within 10 days of contract award, with inspection and acceptance occurring at the destination facility located in Vicenza, Italy, under US Army SSA 173rd BDE. The contract mandates strict adherence to DLA transportation and marking procedures, including the use of the provided military freight and marking identifiers. The required delivery date is July 10, 2026, and the contract falls under solicitation SPE7L1-26-T-837S, issued by the Department of Defense’s Land Supply Chain. All performance, compliance, and logistical obligations are subject to DLA’s governing directives, and the point of contact for inquiries is Kristina Derry at the provided email and phone number.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details