Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Waste Packaging and Labeling Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the packaging and labeling of hazardous waste into 35-gallon and 55-gallon drums in full compliance with DLA Form 2505 and Uniform Hazardous Waste Manifest requirements. All waste must be properly contained, labeled with accurate UN numbers, Emergency Response Guidebook codes, EPA waste codes, and barcodes to ensure regulatory adherence and traceability throughout the handling process. The work is performed under a subcontract awarded by the Defense Logistics Agency, operating under the Department of Defense, and falls under the NAICS code 562920 for Other Waste Collection Services. The solicitation was posted in June 2026, and services are expected to be carried out at an unspecified location, with performance obligations tied to standardized federal waste management protocols.

General Info

Packaging and labeling hazardous waste in 35- and 55-gallon drums per DLA and federal regulations.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

562920 - Materials Recovery FacilitiesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SP450026F5914.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TX24C7 ORGANIC SOLVENTS, TECHNICAL GRADE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 25

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Packaging of waste into 35GL/55GL drums and labeling with UN numbers, ERG codes, EPA waste codes, and barcodes per DLA Form 2505 and Uniform HW Manifest standards.

Similar Contracts

Same NAICS industry code

Appliance Recovery and Recycling Services

HOUSING AND COMMUNITY DEVELOPMENT

POSTED

DEADLINE

Supply of Radome (NSN 5985-01-530-5401)

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

0.13 Acres of Palestine Emergent (PEM) Mitigation

Solicitation # 645-DOTRFQ-3069-2027

The Iowa Department of Transportation is seeking bids for a solicitation regarding 0.13 acres of Palestine Emergent (PEM) mitigation. This project is managed by the agency's office in Ames, Iowa, and the performance of the work is also located within Ames. Interested parties must submit their responses by the deadline of September 19, 2026, at 6:00 PM. The primary point of contact for this solicitation is Mallory Hunter, who can be reached via email or phone for further inquiries.

POSTED

DEADLINE

Radius Recycling dba Schnitzer Steel Products CompanyThe Bay Area Air Quality Management District is processing Application 30880 for Radius Recycling, doing business as Schnitzer Steel Products Company, located in Oakland, California. This project is an administrative action to update the description of the S-6 electric metal shredder with water injection to reflect approved hourly process rates of 350 tons per hour on average and a maximum of 400 tons per hour. This update ensures consistency with previous filings, specifically Application 30009, which involved the installation of Regenerative Thermal Oxidizers and Packed Bed Scrubbers to abate precursor organic compound emissions. Because this change is administrative and does not increase maximum daily or annual throughput, no additional analysis of hourly emission increases is required. The project satisfies the No Net Emission Increase provisions of District Regulation 2, Rule 2, and does not trigger Best Available Control Technology or Best Available Control Technology for Toxics requirements. As a ministerial action, the project is exempt from California Environmental Quality Act requirements. The final outcome of this process will be the reissuance of the facility's Permit to Operate to formally reflect the approved process rates for the S-6 shredder and S-7 infeed conveyor.

Bay Area Air Quality Management District

POSTED

DEADLINE

Paper Recycling Collection Services

260-NETWORK Contract Office 20 (36C260)

POSTED

DEADLINE

Recyclable Materials Collection & Processing

248-NETWORK Contract Office 8 (36C248)

POSTED

DEADLINE

Operation and Maintenance of the Ocean County Recyclable Materials Processing Facility No. II

Solicitation # OCSWM102226

The Ocean County Board of Commissioners, through the Solid Waste Management agency in New Jersey, is seeking competitive contracting proposals for the operation and maintenance of the Ocean County Recyclable Materials Processing Facility No. II. This solicitation, identified by number OCSWM102226, was posted on September 9, 2026, with a response deadline of October 22, 2026. The project is based in Toms River, New Jersey, and is managed by Project Coordinator Evan Johnson and Division Manager Robert Kuhne. Interested organizations must follow strict submission guidelines using the DocuSign platform to ensure their proposals are considered. Required documentation includes a Signature Page, Non-Collusion Certification, Affirmative Action Questionnaire, Statement of Ownership, and a Disclosure of Investment Activities in Iran. Proposers must ensure that the email used for DocuSign matches their vendor account and that all required fields are completed, as failure to properly submit these forms may lead to the rejection of the proposal.

Solid Waste Management

POSTED

DEADLINE

in about 1 month

Licensed Organic Waste Disposal and Processing

FA5270 18 Cons Pk

POSTED

DEADLINE

Biomedical Waste Treatment and Disposal Services

W7N2 Uspfo Activity Tx Arng

POSTED

DEADLINE

FY27 Inert Crushing at Transfer Station

Solicitation # 2026-NIBCONST-594

The City of Prescott is soliciting bids for the FY27 Inert Crushing project at the Transfer Station located at 2800 Sundog Ranch Road. The scope of work involves the on-site crushing and screening of two distinct stockpiles—one consisting of a concrete-inert mixture and the other of asphalt concrete, concrete, and rubble—into a 1 1/4 inch minus product. The contractor is required to document total tonnage produced using off-of-the-belt scale evidence and must coordinate operations with the Solid Waste or Street Maintenance Superintendents to avoid interfering with daily station activities. The project must be completed within 90 calendar days from the Notice to Proceed, with the contract being awarded to the lowest qualified bidder. The procurement process requires a proposal guarantee of at least 10 percent of the total bid price and the provision of performance and payment bonds. Bidders must submit a detailed bidding schedule including unit rates for crushing and fixed costs for mobilization and contract allowances. Technical compliance is governed by the City of Prescott Supplement to the MAG Uniform Standard Specifications and project-specific Special Provisions, with quality control testing performed by an independent geotechnical firm. Additionally, the project adheres to federal and state regulations, including the Buy America preference and American Iron and Steel requirements for applicable funding.

POSTED

DEADLINE

Tire Processing and Recycling ServicesThis subcontract for Tire Processing and Recycling Services supports the South Carolina Public Works agency by processing approximately 250 tons of used tires for prime contractors on Dorchester County Solid Waste Division projects. The selected provider will utilize shredders, granulators, or pyrolysis equipment to implement beneficial reuse methods, effectively diverting waste from landfills. The contractor is responsible for maintaining all necessary environmental permits for waste processing and must provide detailed documentation regarding diversion goals and processed material reports. This opportunity falls under NAICS code 562920, with a response deadline of September 24, 2026.

POSTED

DEADLINE

Recyclable Materials Hauling and Collection Services

OPS-Procurement & Distribution/9680

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

This contract, identified as SPE7L7-26-Q-2418, is a firm fixed price solicitation by the Defense Logistics Agency for the procurement of sealed lead acid storage batteries (NSN 6140-01-624-9682). The requirement consists of two line items totaling eight units, with delivery expected 60 days after the order. This is a restricted source item requiring government engineering source approval, and it is designated as a critical application item. The batteries have a non-extendable shelf life of 12 months and must comply with specific hazardous material communication and packaging standards, including MIL-STD-2073-1E and MIL-STD-129. Quality assurance will be managed via zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Shipments are destined for locations in Oregon and Hawaii, with strict prohibitions against the intentional addition of mercury except where functionally required.

Battery Manufacturing

POSTED

about 8 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 8 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

This solicitation from the Defense Logistics Agency under the Department of Defense is for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369. The contract requires delivery within 60 days after receipt of the order. Strict compliance is required regarding cybersecurity and export controls. The provider must be a CMMC Level 2 Certified Third-Party Assessment Organization and adhere to regulations concerning Covered Defense Information. Additionally, the technical data is subject to ITAR and EAR export controls, meaning access is limited to contractors with an approved US/Canada Joint Certification Program certification and completed DLA export-control training.

Battery Manufacturing

POSTED

about 8 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

COVERALLS, ANTI-EXPO

Solicitation # SPE1C1-26-Q-0498

The Defense Logistics Agency under the Department of Defense has issued solicitation SPE1C1-26-Q-0498 for the procurement of one unit of anti-exposure coveralls, identified by NSN/Part Number 8415-01-593-7934. This federal requirement is tracked under purchase request 7018286739. The solicitation was posted on September 11, 2026, with a response deadline of September 18, 2026. Interested parties should direct all inquiries to the buyer via the email address provided in the primary point of contact or through the DIBBS portal using the specific solicitation number.

Cut and Sew Apparel Manufacturing (except Contractors)

POSTED

about 8 hours ago

DEADLINE

GOVERNMENT FIT VERIFIC

Solicitation # SPE7L3-26-Q-1328

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE7L3-26-Q-1328 for Government Fit Verific, identified by part number 0001S00000060. This federal procurement opportunity was posted on September 11, 2026, and requires a response by the deadline of September 28, 2026. The contract is managed under purchase request 7017604125, with specific quantity requirements detailed within the solicitation documents. Interested parties can access further details and submission guidelines through the DIBBS portal.

Testing Laboratories and Services

POSTED

about 8 hours ago

DEADLINE

POWER SUPPLY, UNINTERRU

Solicitation # SPE7L7-26-Q-2372

POSTED

about 8 hours ago

DEADLINE

61--BATTERY,STORAGE

Solicitation # SPE7L7-26-T-5218

This contract, solicitation number SPE7L7-26-T-5218, is issued by the Defense Logistics Agency for the procurement of three storage batteries, specifically East Penn Manufacturing Co. part number 18-G75-21EE. The acquisition is designated as a total small business set-aside under NAICS code 335910. The items are classified as critical application items with a non-extendable shelf life of 12 months. Delivery is required within 20 days after receipt of order, with the destination and inspection point set as the NAVSUP FLC Material Process Center in Japan. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 for marking. Specific packaging and shipping protocols for hazardous materials are required per IP025 and RP001. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except for functional mercury used in batteries as specified by NAVSEA. All packaging must comply with MIL-STD-2073-1E, and the items must be delivered FOB destination.

Battery Manufacturing

POSTED

about 13 hours ago

DEADLINE

46--MODIFICATION KIT,WATER

Solicitation # SPE8E8-26-T-5568

Solicitation SPE8E8-26-T-5568 is a Request for Quotations issued by the Defense Logistics Agency Troop Support, Construction and Equipment office, for the procurement of two water treatment equipment modification kits under NSN 4610017148561. The requirement specifically references HDT Expeditionary Systems Inc part number T00012-5083-2. This is a total small business set-aside under NAICS 333310, with a response deadline of September 21, 2026. Delivery is required within 20 days after receipt of order, with the destination for inspection and acceptance located at Camp Pendleton, California. The procurement requires electronic submission of quotes via the DIBBS system. Contractors must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, and follow DLA packaging requirements RP001. Invoicing and payment must be processed through the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Notably, the use of additive manufacturing for the supplied parts is prohibited unless specifically authorized.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 13 hours ago

DEADLINE

61--BATTERY,STORAGE

Solicitation # SPE7L7-26-Q-2412

The Defense Logistics Agency, through DLA Land and Maritime, has issued Request for Quotations SPE7L7-26-Q-2412 for the procurement of 100 nickel-cadmium wet storage batteries (NSN 6140-01-241-2296). These batteries are specified as wet, discharged, and spillable, with a non-extendable shelf life of 36 months. Approved sources include Aerodesign, Inc. (P/N AD-31004-04C) and Marathonnorco Aerospace, Inc. (P/N 31004-04C). The items are to be delivered to the Royal Saudi Air Force within 60 days after the order date. This is a fixed-price solicitation where award will be based on the best value to the government, evaluating technical conformity, past performance, and offered delivery time. Because the batteries are classified as corrosive materials (UN2795), the contractor must strictly adhere to hazardous materials regulations, including ICAO, IMDG, 49 CFR, and AFJMAN 24-204. Packaging must comply with MIL-STD-2073-1E Level B, Pack Code Q, using 4G fiber-board boxes. Inspection will be conducted by DCMA at the distributor or OEM site, with acceptance occurring at the origin. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. The contract incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and strict cybersecurity reporting requirements under DFARS 252.204-7012. Quotes must be submitted electronically by the deadline of September 17, 2026.

Battery Manufacturing

POSTED

about 13 hours ago

DEADLINE

53--ANODE,CORROSION PREVEN

Solicitation # SPE4A6-26-Q-1423

The Defense Logistics Agency is soliciting quotes for the procurement of six corrosion prevention anodes under National Stock Number 5342013978773. This requirement is identified by solicitation number SPE4A6-26-Q-1423 and is designated as a total small business set-aside under NAICS code 332994. The approved source for this item is 6RDX4 W3T106427. Items must be delivered to DLA Distribution San Joaquin within 190 days after the order is placed. Interested responsible sources must submit their electronic quotes by the deadline of September 21, 2026. The solicitation is available exclusively online via the DIBBS portal, as no hard copies or separate technical drawings are provided.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 13 hours ago

DEADLINE

Supply of Fluid Pressure Regulating Valves (NSN 4820014623023)

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS