Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Waste Packaging, Labeling, and Compliance Marking

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires precise adherence to federal Department of Transportation and Environmental Protection Agency regulations for the packaging, labeling, and marking of waste containers. All waste must be properly identified with hazard warnings and compliance identifiers to ensure safe handling, transportation, and disposal in full compliance with applicable environmental and safety standards. This work is critical to maintaining regulatory compliance across waste management operations under the Department of Defense. This subcontract, issued by the Defense Logistics Agency under NAICS code 562998 for other waste management services, is set to be active as of July 20, 2026. Performance is expected to occur in an unspecified location, with no set-aside provisions applied. The contract is tied to the solicitation reference SP450025D0018 and delivery order SP450026F6568, and all activities must align strictly with DOT and EPA requirements without exception. Failure to meet these standards could result in penalties, delays, or rejection of shipments, making strict regulatory compliance non-negotiable throughout the contract term.

General Info

Waste containers must comply strictly with DOT and EPA regulations for packaging, labeling, and marking under DoD contract effective July 20, 2026.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

562998 - All Other Miscellaneous Waste Management ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Ensure waste containers are properly packaged, labeled, and marked with hazard warnings and compliance identifiers per federal DOT and EPA regulations.

Similar Contracts

Same NAICS industry code

LOCAL LET MAINTENANCE CONTRACT, MIDLAND CO, PUMP STATION & DRAINAGE SYSTEM CLEANINGThe Texas Department of Transportation, Odessa District, is soliciting bids for a Local Let Maintenance Contract to perform pump station and drainage system cleaning along Highway BI0020E in Midland County, Texas, with an estimated contract value of $366,368. The solicitation, numbered 6505-49-001, was posted on July 20, 2026, and bids are due by August 11, 2026, at 10:00 AM. Work under this contract is to be performed over a 731-calendar-day period at various locations within Midland County, with performance and inspection occurring at the project sites. Only prequalified contractors are eligible to bid, and all submissions must be made electronically through the Electronic Bidding System or referenced via the Electronic State Business Daily, which are the sole official platforms for solicitation details, addenda, and bid submission. A performance guarantee of $7,000 is required to ensure contractual compliance, though no specific technical standards, inspection criteria, or detailed performance metrics are outlined in the available documentation, implying reliance on TxDOT standard practices. The payment office is located at 3901 E US HWY 80, Odessa, TX, and inquiries should be directed to Jennifer Chavarria at the Odessa District Maintenance Contract Office. No formal FAR clauses, evaluation factors, packaging requirements, or special contract conditions are included in the publicly accessible materials, and all detailed terms, including pricing, are managed through the ESBD and Electronic Bidding System. The contract does not specify FOB terms, invoicing methods, or accounting codes beyond a general agency code of 601 and project number RMC - A00223084, and no socioeconomic set-asides or representation certifications are indicated beyond a 0.0% Small Business Enterprise goal.

Texas Department of Transportation

POSTED

DEADLINE

Hazardous Waste Packaging and Labeling ServicesThe contract encompasses the collection, segregation, packaging, and labeling of hazardous waste streams such as paint waste, detergents, compressed gas cylinders, and petroleum, oil, and lubricant residues, all in strict accordance with MIL-STD-129 and MIL-STD-130 standards. This work is critical for ensuring safe and compliant handling of dangerous materials within Department of Defense operations, with adherence to military specifications for labeling and packaging to facilitate proper identification, transportation, and disposal. The services are performed as a subcontract under the Defense Logistics Agency, with the NAICS code 562998 indicating other waste management services, and the contract was posted on July 20, 2026, with performance likely occurring across unspecified but government-controlled locations.

Defense Logistics Agency

POSTED

DEADLINE

ANC Solid Waste W91QV126RA018The U.S. Government seeks to award a five-year Firm-Fixed-Price contract with an optional six-month extension for comprehensive solid waste management services at Arlington National Cemetery, limited exclusively to Women-Owned Small Businesses (WOSB) under a Lowest Price Technically Acceptable (LPTA) source selection process. The acquisition, identified by solicitation number W91QV126RA018, is classified under NAICS code 562111-Solid Waste Collection with a small business size standard of $47.0 million. The contract will manage municipal solid waste, construction and demolition debris, single stream recycling, and scrap metal, including the critical relocation of waste collection infrastructure following the Southern Expansion project, requiring transportation, placement, and coordination of new dumpsters while minimizing disruption to cemetery operations, ceremonies, and visitor access. Performance is required at Fort Myer, Virginia, with the period of performance beginning November 1, 2026, and extending through May 31, 2032, encompassing a 15-day phase-in period, one base year, four one-year option periods, and the optional six-month extension. Proposals must be submitted electronically no later than July 24, 2026, at 4:00 PM EST, to the designated point of contact, with a strict requirement that the entire submission not exceed five megabytes and be organized into three volumes: administrative, technical execution plan, and price proposal—all adhering to specific page limits and formatting criteria. Offerors must also complete and submit a fully populated pricing template, current SAM.gov registration with accurate UEI and CAGE codes, signed SF 1449 forms, and all required representations and certifications, including those for small business status and compliance with federal regulations. The contract incorporates mandatory FAR and DFARS clauses governing disputes, personal identity verification, contracting officer’s representative authority, subcontracting for commercial products, and applicable law for breach of contract claims, alongside compliance with NIST SP 800-171 for information security, Buy American provisions, and labor standards including prevailing wage requirements under the Davis-Bacon Act. Quality assurance and performance evaluation are based on a detailed Quality Assurance Surveillance Plan and a set of performance thresholds requiring zero deviation from standards for waste management, reporting, and safety protocols. Contractors must submit monthly solid waste reports, OSHA logs, and transaction spreadsheets documenting disposal data, maintain an approved Accident Prevention Plan aligned with cemetery standards, and use

W6QM Micc-Ft Belvoir

POSTED

DEADLINE

Dust Suppression Infrastructure InstallationThe contract involves the installation and ongoing maintenance of dust suppression systems on exposed lakebed areas to reduce PM10 emissions, with technologies including sprinklers, polymer applications, and gravel cover. The work is scoped to ensure long-term effectiveness in controlling airborne particulate matter, particularly in arid or dry lake environments where dust poses environmental and public health risks. The project is classified under NAICS code 562998 for other waste management services and is structured as a subcontract under the Regional Water Quality Control Board, Region 7 - Colorado River Basin, based in California. The contract was posted on July 20, 2026, and is tied to a specific environmental mitigation initiative managed by the Regional Water Quality Control Board. While the exact location of the lakebed site is not specified, the performance location is understood to be within the board's jurisdiction in the Colorado River Basin region. The contract does not include a solicitation number or set-aside designation, and no point of contact is listed, indicating the details may be managed internally or through a prime contractor. The project aligns with broader regulatory efforts to improve air quality and protect ecological conditions in sensitive desert wetland areas.

Regional Water Quality Control Board, Region 7 - Colorado River Basin, Palm Desert

POSTED

DEADLINE

Expedited Hazardous Waste Removal (Emergency Response)This contract mandates the rapid removal and disposal of non-RCRA hazardous waste liquids within a strict three-business-day window, requiring immediate mobilization and adherence to military environmental compliance standards. The work is classified as an emergency response action, underscoring the urgency and critical nature of the task, with all operations subject to protocols established by the Department of Defense to ensure safety, regulatory alignment, and mission continuity. The contractor must be fully prepared to deploy swiftly to any designated location within the defense infrastructure, handling wastes that fall outside standard federal hazardous waste classifications but still pose significant environmental or operational risks. The subcontract is administered by the Defense Logistics Agency under NAICS code 562998, which encompasses other waste management services, and is tied to the contract identifier SP450023D0007 with delivery order SP450026F6388. Despite the absence of specific location details in the provided data, performance is expected across DOD facilities wherever such emergency waste events occur. The contract does not specify a set-aside status or solicitation number, indicating it was likely awarded through a streamlined or urgent procurement process. All activities must be executed with precision and documentation to meet military accountability requirements, and the contractor must maintain readiness to respond at any time without delay.

Defense Logistics Agency

POSTED

DEADLINE

ITB - Disposition and Sale of Surplus Library Materials for Harris County Public LibraryHarris County is soliciting bids for a one-year term contract beginning approximately October 1, 2026, to manage the purchase, removal, and final disposition of surplus, obsolete, worn, damaged, or discarded library materials from the Harris County Public Library. The solicitation, numbered 26/0208, is issued as an Invitation for Bid under NAICS code 562998, with responses due by August 3, 2026. The vendor is responsible for providing all labor, vehicles, equipment—including bins, carts, boxes, pallets, Gaylor containers, and rolling totes—and transportation resources necessary to collect materials from designated library facilities during normal business hours. All equipment must be clean, structurally sound, and free of hazards, with no additional cost to the County. Materials are accepted solely in their as-is condition; the County will not sort, clean, or prepare them in any way prior to pickup. The vendor must remove all packaging, debris, and equipment from County property after each collection and ensure that all County ownership markings, barcodes, RFID tags, or library identifiers are reasonably removed or obscured prior to resale or redistribution. Pricing is based on a firm, fixed per-pound rate proposed by the vendor, with payment to the County determined by actual weight collected during each pickup. The contract includes four optional one-year renewals, subject to the same terms and pricing. The vendor must comply with stringent operational and legal requirements, including maintaining minimum insurance coverage of $1 million each for workers’ compensation, commercial general liability, automobile liability, and umbrella/excess liability, with a waiver of subrogation in favor of the County. All workers must be paid at least $21.65 per hour per Harris County’s minimum wage policy. Contractors must certify they are not debarred or suspended from federal or state programs, not engaged in business with Iran or Sudan, and not boycotting Israel. They must also protect any personally identifiable information in discarded materials, report security breaches within 24 hours, and indemnify the County against claims arising from their performance. Invoices must be itemized and submitted to VendorsInvoices@hctx.net with the purchase order number, and payments are processed on a Net 30 basis. The vendor is required to submit quarterly environmental reports detailing the disposition of materials—whether recycled, sold, or recovered—and the associated emissions avoided. A dedicated account manager must be designated as the primary liaison with the library and purchasing

POSTED

DEADLINE

Grease Trap Clean OutThe contract solicitation for Grease Trap Clean Out is issued under solicitation number FA480926Q0045 by the Department of Defense through the 4th Cons Squadron CC at Seymour Johnson AFB, North Carolina, with performance expected in Goldsboro, NC. It is structured as a basic year with four optional periods, allowing for extended service beyond the initial term. This procurement is a Total Small Business Set-Aside, designated under NAICS code 562998, exclusively open to small businesses as defined by the SBA. The requirement is outlined in the attached Statement of Work, which details the scope of services for grease trap maintenance and cleanout operations. Responses are due by August 3, 2026, with the solicitation posted on July 17, 2026. Primary point of contact is Michael A. Berg, reachable via phone or email, with Ryan Rhea as the secondary contact for additional inquiries. All submissions must be made through the SAM.gov portal linked in the posting.

FA4809 4TH Cons Squadron Cc

POSTED

DEADLINE

W--GCPO STREET SWEEPER RENTALThe contract solicitation 140R1026Q0002 is a total small business set-aside under FAR 19.5 for the rental of a vacuum-type street sweeper to serve the Grand Coulee Power Office in Grand Coulee, Washington. The base performance period is two months beginning February 26, 2026, with up to four additional two-month option periods extending the potential contract duration through April 21, 2030. The sweeper must be a 4-wheel vacuum model no older than five years with less than 5,000 operating hours, equipped with dual side brushes, a minimum swept path of 10 feet, a hopper capacity of at least 8 cubic yards, and a 12-inch minimum diameter vacuum hose with 16 feet of 8-inch tube extensions. Alternatively, a mechanical sweeper with vacuum capabilities may be accepted if it meets reduced but still stringent specifications. The equipment must be delivered FOB destination to the designated receiving location at the Grand Coulee Project and must be in ready-for-operation condition, meeting all federal and state regulations for roadworthiness and safety upon arrival. The contractor is responsible for all maintenance, repairs, and associated costs throughout the contract term. Offers must be submitted by February 20, 2026, at 12:00 PM Pacific Time through SAM.gov and must include completed Standard Form 1449, itemized pricing, current representations and certifications via SAM, insurance certificates, and documentation demonstrating technical capability and past performance. The award will be made on a best-value basis, evaluating technical capability, past performance, and price fair and reasonableness. The contract incorporates numerous FAR clauses including 52.212-4 and 52.212-5 with a February 2025 deviation for statutory implementation, 52.203-17 for whistleblower protections, 52.204-25 prohibiting certain telecommunications equipment, Buy American requirements, service labor standards, and prohibitions on covered applications and unmanned aircraft systems. Invoicing must be processed electronically through the Treasury’s IPP system, with supporting documents sent to the designated Bureau of Reclamation email. The contract is issued by the Bureau of Reclamation, Pacific Northwest Region, and is subject to amendments dated February 6, 2026, which clarified vendor questions, delivery specifics, and affirmed the closing date without

Grand Coulee Power Office

POSTED

DEADLINE

Emergency Landfill Fire Response Coordination and Equipment ManagementThe contract entails on-site coordination of rented equipment and personnel to manage and respond to an emergency landfill fire, with a primary focus on effective fire suppression, strict adherence to safety regulations, and optimal utilization of available resources. All activities must be executed directly at the landfill site, requiring real-time decision-making, logistical oversight, and seamless integration of contracted personnel and equipment to contain and extinguish the fire while minimizing environmental and public safety risks. The work is performed under a subcontract arrangement by NEPM Waste Management Limited on behalf of the Government of Jamaica, classified under NAICS code 562998 for other waste management services. The contract was posted on July 17, 2026, and is tied to a specific emergency response scenario requiring immediate mobilization and operational readiness. There is no specified set-aside classification or geographic detail provided beyond the general location governed by Jamaica's authority, and all performance must align with the urgent needs of the landfill emergency scenario without delay or compromise to safety or efficiency.

NEPM Waste Management Limited

POSTED

DEADLINE

Secure Destruction of Damaged or Obsolete Tax StampsThe contract requires the secure physical destruction of defective, returned, or expired cigarette tax stamps under strict regulatory protocols. The vendor must ensure complete and irreversible destruction of the stamps using approved methods, accompanied by thorough documentation throughout the process. A notarized Certificate of Destruction must be issued for each batch to verify compliance and accountability. All activities must be conducted with heightened security to prevent tampering, theft, or unauthorized access to the stamps at any stage. The work is anticipated to occur within Iowa, with no specific location designated, and must adhere to state requirements for handling taxable commodity remnants. The solicitation is open as a subcontract opportunity with no set-aside designation, and responses are due by August 6, 2026. The North American Industry Classification System code 562998 applies, indicating the scope of services falls under other waste management services. Interested parties must submit proposals through the designated online portal by the stated deadline.

POSTED

DEADLINE

Government Property Marking Removal (RQ011)The contract requires the secure removal of government markings from supplies that have been rejected or otherwise not accepted, ensuring compliance with RQ011 standards prior to return or disposal. This task must be performed with strict attention to security and procedural accuracy to prevent unauthorized exposure of sensitive government identifiers. The work is to be carried out at the specified place of performance in Tracy, California, with a zip code of 95304-5000, and is classified as a subcontract under the NAICS code 562998 for other support services. The solicitation was posted on July 16, 2026, with responses due by July 27, 2026, and is managed by the Department of Defense through the Land Supply Chain organization. While no specific point of contact or set-aside information is provided, the requirement demands adherence to federal protocols for handling government property and ensures all markings are eradicated in a manner that prevents recovery or misrepresentation. The activity must be completed using approved methods and documented to maintain accountability throughout the removal and disposal process.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Agricultural Wash - Equipment Disinfecting ServiceThis procurement under solicitation W911YP26RA005 seeks equipment disinfecting services using the Agricultural Wash (AGWASH) method at Camp Williams, Bluffdale, Utah, with performance scheduled for August 24–27, 2026. The requirement is structured as a total small business set-aside under NAICS code 562998, with a small business size standard of $16.5 million, and only SAM.gov-registered small businesses are eligible to respond. The contract is Firm-Fixed Price and evaluated on a best-value basis, considering technical approach alignment with the Performance Work Statement, demonstrable availability of personnel and equipment—including proper licensing for Virkon-S Ag Washing—and overall price. Offerors must submit a comprehensive technical proposal; responses lacking detailed methodology or including only affirmations of capability will be deemed non-responsive. All submissions must include a valid Unique Entity Identification, CAGE code, and point of contact, and require an active, verified SAM registration at both submission and award time. The service involves full disinfection of agricultural equipment exterior surfaces, containment and proper disposal of wastewater, and achieving a minimum 90% first-inspection pass rate for chemical coverage, with acceptance inspections occurring both at the origin and destination sites and governed by the Quality Assurance Surveillance Plan and Performance Requirements Summary. The contracting officer is Mr. Otha Henderson, and all proposals must be emailed to otha.b.henderson.civ@army.mil by the revised deadline of July 16, 2026, at 0700 Mountain Time, though the original deadline was stayed due to a pending NAICS code appeal and a current Government Accountability Office protest. Contractors must comply with extensive security, identity verification, and facility safety protocols, including Tier 1 background checks for CAC access and adherence to DoD policies on counter-trafficking, organizational conflicts of interest, and cyber incident reporting. Payment will be processed through Wide Area Workflow, and post-award conferences are mandatory. The acquisition includes specific contract clauses such as 52.212-4, 52.219-6, 52.252-2, and others mandating compliance with Federal Acquisition Regulation requirements, including accelerated payments to small business subcontractors and restrictions on internal confidentiality agreements.

W7N3 Uspfo Activity Ut Arng

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Epinephrine Injection (NSN: 6505015273957)The contract mandates the manufacture, packaging, labeling, and delivery of FDA-approved Epinephrine Injection meeting all current Good Manufacturing Practices and Defense Logistics Agency specifications, with the final product destined for a U.S. Navy vessel under FOB Destination terms. The product is identifiable by National Stock Number 6505015273957 and falls under the NAICS code 283410, indicating its classification within pharmaceutical manufacturing. All activities must adhere strictly to regulatory and military standards to ensure safety, potency, and compliance throughout the supply chain. The agreement is structured as a subcontract managed under the Department of Defense through the Defense Logistics Agency, with the work scheduled to be performed in alignment with federal procurement timelines and delivery protocols. The contract was posted on July 20, 2026, and the delivery endpoint is a U.S. Navy vessel, requiring precise logistical coordination and documentation to meet military operational needs. The product must be fully compliant with both FDA and DLA requirements, including proper labeling, traceability, and packaging suitable for military transport and storage conditions.

POSTED

DEADLINE

Wiper Ring Supply – Precision Sealing ComponentThe contract entails the supply of 17 precision-engineered wiper rings, identified by Part Number 351-44900-330A and National Stock Number 5330-01-284-1598, manufactured to meet specific military standards for performance and reliability. Each unit must comply with all relevant technical and quality requirements, including proper packaging and labeling as dictated by defense regulations. Delivery must be completed in full accordance with established logistical protocols to ensure operational readiness and traceability. The contract is structured as a subcontract under the authority of the Defense Logistics Agency, part of the Department of Defense, and classified under NAICS code 332996, indicating its focus on other fabricated metal product manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to align with DLA’s supply chain directives, though the specific delivery location and point of contact are not detailed. Access to official contract records is available through the DIBBS portal using the provided reference number.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information handled by the contractor. This includes establishing and sustaining a compliant security posture across systems and networks that process, store, or transmit sensitive defense data, ensuring that all required controls are properly configured, monitored, and documented. The contractor must also be prepared to support timely and accurate cyber incident reporting in accordance with federal requirements, enabling rapid response and coordination with defense authorities when security breaches or anomalies occur. This subcontract falls under the NAICS code 541512 for computer systems design services and is issued by the Defense Logistics Agency under the Department of Defense. The work is focused on sustaining compliance with stringent federal cybersecurity standards, and while no specific location is listed for performance, the obligations apply wherever covered defense information is accessed or managed. The contract underscores a critical requirement for continuous adherence to NIST controls and active participation in the defense cyber incident response framework, making cybersecurity expertise and operational readiness key to successful contract execution.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Compliance & DocumentationThe contract requires strict adherence to OSHA Hazard Communication standards and DFARS 252.223-7001 for all hazardous materials linked to connectors, ensuring proper labeling and accurate safety data sheet generation to meet federal regulatory requirements. All documentation must align with current guidelines to facilitate safe handling, storage, and disposal of chemical substances used in the procurement and integration of these components. This subcontract, issued under NAICS code 541620 by the Defense Logistics Agency within the Department of Defense, mandates compliance as a non-negotiable condition of performance. While specifics on location or point of contact are not provided, the obligation extends to all stages involving hazardous materials associated with connectors, and failure to deliver compliant labeling and SDS documentation could result in contract non-compliance. The posting date indicates this requirement is active for future performance beginning in 2026.

Environmental Consulting Services

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires the performance of zero-defect quality inspections using either MIL-STD-1916 or ASQ H1331 sampling methods to verify that all delivered products meet the stringent acceptance standards of the Defense Logistics Agency. These inspections are critical to ensuring full conformance and are conducted to support DLA’s mission of reliably supplying defense systems and materiel with no tolerance for nonconformities. The work is classified under NAICS code 541330, indicating it falls within the professional, scientific, and technical services sector, specifically in the realm of quality assurance and inspection. The contract is structured as a subcontract and is tied directly to DLA operations under the Department of Defense, with performance expected to align precisely with federal quality benchmarks without deviation. All activities must be executed to guarantee that every unit received by DLA is fully compliant, with no room for defective or nonconforming product acceptance.

Engineering Services

POSTED

DEADLINE

Packaging and Marking of Military-Grade ComponentsThe contract requires the provision of packaging and marking services for electrical connectors in strict compliance with MIL-STD-2073-1E for packaging standards and MIL-STD-129 for item marking, all in support of the Defense Logistics Agency. The components are destined for military use under the Department of Defense and must meet exacting federal specifications to ensure durability, traceability, and logistical compatibility across the defense supply chain. The work is structured as a subcontract under NAICS code 423840, which pertains to wholesale trade of electronic components and equipment, indicating the scope is focused on preparation and shipment readiness rather than manufacturing. Performance is expected to align with DLA’s standards for federal supply systems, though no specific location for performance or point of contact is listed. The solicitation is posted under contract SPE7M126V050N and was published on July 20, 2026, with no set-aside provisions indicated, meaning it is open to all qualified subcontractors. Full adherence to military standards is critical, as non-compliance could result in rejection of shipments, delays in delivery, or financial penalties. All packaging must preserve the integrity of the connectors during transport and storage, while marking must include universally recognized DOD identifiers, barcodes, and data matrix codes to enable automated receipt and inventory management at military depots worldwide.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Supply of Electrical Plug Connectors (MS3406D40-56P / NSN 5935011427787)The contract entails the manufacture and supply of 43 military-spec electrical plug connectors specified as MS3406D40-56P with the NSN 5935011427787, all of which must fully comply with applicable MIL standards to ensure reliability and interoperability in defense systems. The item is critical for military applications requiring high-performance electrical connections under demanding environmental and operational conditions. This is a subcontract issued under the authority of the Defense Logistics Agency within the Department of Defense, with a posting date of July 20, 2026, indicating it is part of a broader procurement effort managed through the DLA’s contracting system. The NAICS code 334417 confirms the scope falls within the aerospace and electronic component manufacturing sector. Performance location and specific delivery details are not yet defined, and no set-aside provisions are indicated, meaning the contract is open to all eligible contractors. The sole point of reference for award and tracking purposes is the DIBBS system under contract number SPE7M126V050N.

Electronic Connector Manufacturing

POSTED

DEADLINE

Domestic Freight and Delivery to DLA DepotTwo reconditioned circuit card assemblies must be transported from the rework facility to the DLA Distribution Depot in Tracy, California, with delivery required no later than August 19, 2026. The shipment is governed by FOB Origin terms, meaning the buyer assumes all risk and responsibility for the goods once they leave the rework facility. The contract falls under NAICS code 484220, indicating it is a domestic freight transportation service, and is classified as a subcontract within the Department of Defense framework. The Defense Logistics Agency is the contracting organization, and the work is being performed under solicitation SPE4A626PX555, with the opportunity posted on July 20, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply Chain Traceability and Documentation ServicesThe contract requires the compilation and verification of detailed documentation to establish the prior government ownership and reconditioning history of surplus electronic items, ensuring full compliance with federal requirements prior to submission. This work is critical for maintaining the integrity and traceability of the defense supply chain, as accurate records are necessary to confirm legal and regulatory adherence throughout the lifecycle of the equipment. The contractor must rigorously authenticate provenance and reconditioning data to support transparency and accountability in the disposition process. This subcontract is part of a larger effort managed by the Defense Logistics Agency under the Department of Defense, aligning with NAICS code 541611 for management consulting services. The project involves meticulous record gathering, validation, and formatting to meet stringent government standards, with no specific location specified for performance. The solicitation was posted in July 2026 and is tied to contract SPE4A626PX555, indicating its role within an established procurement pathway for supporting defense logistics operations.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Inspection, Packaging, and Marking of Reconditioned ElectronicsThe contract pertains to the final inspection, preservation, packaging, and labeling of reconditioned circuit card assemblies to ensure full compliance with military packaging and marking standards. This effort is critical to maintaining the integrity, functionality, and traceability of electronic components used in defense systems, requiring strict adherence to established federal and military specifications throughout every phase of handling. The work involves detailed quality control procedures to verify that each assembly meets performance criteria prior to being preserved against environmental degradation, securely packaged, and accurately labeled in accordance with mandated military protocols. This subcontract is issued under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 493190 for other warehousing and storage. The solicitation was posted on July 20, 2026, and the place of performance is not specified, suggesting the work may be conducted at any approved contractor facility capable of meeting the rigorous defense standards. The contract's purpose is to support the sustainment and readiness of military electronics by ensuring that reconditioned components are handled, stored, and shipped with the same precision and reliability as new units, thereby reinforcing the logistical backbone of defense operations.

Other Warehousing and Storage

POSTED

DEADLINE

Reconditioning of Government Surplus Circuit Card AssembliesThe contract entails the reconditioning of government surplus circuit card assemblies to restore them to original technical specifications and military standards for reuse. This involves the systematic replacement of expired or degraded components, thorough functional testing to ensure operational integrity, and adherence to all applicable military performance and reliability requirements. The work must be performed with precision to guarantee that the returned assemblies meet the identical functional and environmental criteria as newly manufactured units, ensuring they are fully viable for military systems and platforms. This subcontract is issued under the Defense Logistics Agency within the Department of Defense and falls under NAICS code 334418 for electronic component and product manufacturing. The solicitation was posted on July 20, 2026, and the performance location and point of contact details are not specified, though the work is tied to DLA’s broader initiative to extend the life cycle of critical electronic assets. The contractor is expected to deliver reconditioned assemblies that are fully compliant, documented, and ready for immediate integration into defense systems without the need for additional modification or qualification.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Fuel Additive Supply (FSII, SDA, CI/LI)The contract entails the supply of aviation fuel additives including Fuel System Ice Inhibitor FSII, Static Dissipative Additive SDA, and Corrosion Inhibitor/Lubricity Improver CI/LI in either bulk or pre-mixed formulations, all of which must meet rigorous military performance specifications to ensure seamless integration into operational fuel batches. These additives are critical for maintaining fuel system integrity, preventing ice formation, managing static discharge, and inhibiting corrosion across a wide range of environmental and operational conditions encountered by military aviation platforms. The award is structured as a subcontract under the Defense Logistics Agency within the Department of Defense, with the North American Industry Classification System code 325992 indicating specialty chemical manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to support defense operations without geographic restrictions specified, implying nationwide or global applicability. The contract does not indicate a set-aside classification or specific point of contact, suggesting a broad procurement approach aimed at qualified suppliers capable of meeting stringent military quality and delivery requirements for mission-critical fuel additives.

Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing

POSTED

DEADLINE